Hewlett Packard HP Color LaserJet 2550Ln Descargar Drivers, Utilidades y Firmware

Compañía
Hewlett Packard
Dispositivo
Impresoras y Plotters
Modelo
Hewlett Packard HP Color LaserJet 2550Ln
Descripción
Firmware Update utility
Sistema Operativo
Mac OS X
Idioma
Arabic
Versión Firmware
20040930
Tamaño
5.6Mb
Nombre del archivo
2550_fw_update20040930.dmg
Fecha
28 Jul 2005
Información
WARNING: Determine what the current firmware version of your printer is before downloading the update. If your printer already has the current version (20040930), downloading this file might cause possible performance issues. To determine the version of firmware of your HP Color LaserJet 2550 printer, print a Configuration Page by pressing the Go button (green) and the Cancel button (Red) on the printer's control panel. The firmware version is listed on the top left part of the page, under Product Information - Firmware Datecode.

Firmware Enhancements

These changes are implemented in the new version firmware 20040930:
Default screenmatch color treatment for non-driver PostScript jobs.
Enabled to set FONTSOURCE to a downloaded soft font via PJL.
Cyrillic/Greek/Hebrew font settings now available
Improved memory allocation for complex pages.
The default I/O timeout changed to 120 seconds.
Printing from Mac systems, and printing PDF files, will have an improved CMYK color adjustment.
Calibration will now occur on non-HP refilled cartridge that have the e-label set to "toner out".
Unexpected Paper Size messages are now bypassed by pressing Go or Cancel from the Toolbox utility.
The Supplies Status page will now include the part number for HP cartridges when recognizing a non-HP cartridge installed.
Monochrome print speed will increase by choosing "Print to Grayscale" in the driver's Color tab.

Note: This utility is in English only.

* You will need 20MB of disk space to use the Firmware Update Utility.

* The HP Color LaserJet 2550 series printer must be in a READY state and remain powered on during the entire firmware update process.

* The control panel of the printer will display a series of flashing lights.

* After the Firmware Update Utility has finished, the HP Color LaserJet 2550 series printer will display a solid green Ready light (second from the bottom). You may be prompted to reboot your computer.


Installation Instructions

(NOTE! If you use Internet Explorer to download the utility, it may strip the .dmg extension to the file. Simply re-add the .dmg extension and MAC OS X should recognize the file as a disk image)

This utility is for use on any OS X 10.2 or 10.3 Mac. It will NOT function in the MAC OS 9 environment.

It can only be used with a USB connection to the HP Color LaserJet 2550.

Instructions for upgrade

* For users connected via the network, please temporarily disconnect your HP Color LaserJet 2550 series printer from the network to ensure the network devices to not interrupt the FW upgrade process.
Mount the disk image containing the FW update.
Run the FW Update Application contained in the disk image.
Follow the onscreen prompts to continue.
When prompted, connect the printer via USB.
Upon finding an HP Color LaserJet 2550 series printer, the utility will prompt you to reboot the printer by simply turn the power off and back on. This ensures the printer is in a proper state to receive the update.
Once the printer has been rebooted, the utility will allow you to 'download' the firmware to the HP Color LaserJet 2550 series printer.
DO NOT POWER CYCLE THE PRINTER during the upgrade process or it will leave your printer in an unusable state.
One green LED will start flashing initially followed by 2 LED's flashing.
Once the LEDS stop flashing, the printer has updated and re-initialized, the firmware should be updated.
The firmware update can take up to 5 minutes to complete. Please be patient.
Compañía
Hewlett Packard
Dispositivo
Impresoras y Plotters
Modelo
Hewlett Packard HP Color LaserJet 2550Ln
Descripción
PCL6 Driver
Sistema Operativo
Windows 2000-2003-XP
Idioma
Arabic
Versión Driver
60.34.78.41
Tamaño
5.5Mb
Nombre del archivo
clj2550pcl6win2kxp2003-ar.exe
Información
Enhancements

Incorporated JPEG compression to reduce spool file size.
Resolves spoolsv.exe crash when printing some PowerPoint documents.
Control Panel simulator in the Services tab is now functional.

This section will help you in the download of the software to your computer and start you on the install process.
Before proceeding with the software installation, the printer must first be properly set up, and your computer must be ready to print.

DOWNLOAD AND EXTRACT THE SOFTWARE

Close any screen savers, virus protection programs, or other software programs running on your computer.
Click on Download Now and a File Download box will appear.
Select Save This Program to Disk and a Save As box will appear.
Select a directory to save the file in and click Save.
Locate the file using Windows Explorer when the download has completed.
Double click on the file. This will extract all the driver files into a directory on your hard drive. The directory these files are extracted to will have a similar name to the file that was downloaded (i.e., c:\clj2550pcl6). However, you can change the path and directory name at the time of extracting the file.
PLEASE USE THESE STEPS IF YOU ARE UPDATING THE HP COLOR LASERJET 2550 DRIVER
From the Windows XP desktop, click Start, and then Printers and Faxes (for Windows 2000, click Start, Settings and then Printers).
Right click on the hp color LaserJet 2550 PCL6 icon or listing, and then click Properties.
Click the Advanced tab.
Make certain the Driver box displays hp color LaserJet 2550 PCL6, and then click New Driver.
In the Add Printer Driver Wizard window, click Have Disk, and then Browse.
Browse to the directory that the downloaded files where unzipped to.

NOTE: The default directory would be C:\clj2550pcl6 (xx represents language, such as en for English)

The Look in box will display clj2550pcl6win2kxp2003-xx (xx represents language, such as en for English). Do not open any folders in this directory. The autorun.ini file should be in the File name box. Click Open.
On the Install From Disk window, click OK. The print driver name, hp color LaserJet 2550 PCL6, should be displayed. Click Next to continue.
When the update is finished, click OK to close the hp color LaserJet 2550 PCL6 Properties window. The update is now complete.
PLEASE USE THESE STEPS IF THIS IS A FIRST TIME INSTALLATION OF THE HP COLOR LASERJET 2550 DRIVER:
Attach a USB or parallel cable to the printer and the computer.
The "Found New Hardware Wizard" should appear. Note: If attaching via a parallel cable it may be necessary to restart the computer for the "Found New Hardware Wizard" to appear.
For Windows XP
Choose "Install from a list or specific location (advanced)" and then click Next.
Select only the box next to "Include this location in the search" (clear all other check boxes) then click the browse button to locate the directory where the driver was extracted to in the steps above. The directory these files are extracted to will have a similar name to the file that was downloaded (i.e., c:\clj2550pcl6).
Click once on the directory name to highlight it then choose OK. The directory path then appears in the dialog.
Select the Next button. Files will be copied to the appropriate directories automatically.
Click the Finish button within the "New Hardware Wizard"
After several moments and message will appear on the system tray (at the bottom right of the screen near the clock) indicating that "Your new hardware has been installed and is ready to use.

For Windows 2000
Click the Next button to continue.
Choose "Search for a suitable driver form my device (recommended)" and then click Next.
Select only the box next to "Specify a location" (clear all other check boxes) and click Next.
Click the browse button to locate the directory where the driver was extracted to in the steps above. The directory these files are extracted to will have a similar name to the file that was downloaded (i.e., c:\clj2550pcl6).
Click once on the directory name to highlight it and then select the Open button.
Autorun.inf should appear in the "file name" box. Click the Open button.
Select OK. The wizard will find the driver for the device.
Click the Next button.
Click Finish. Several dialogs will appear and then disappear.
The printer driver is now installed.
Compañía
Hewlett Packard
Dispositivo
Impresoras y Plotters
Modelo
Hewlett Packard HP Color LaserJet 2550Ln
Descripción
PostScript Driver
Sistema Operativo
Windows 2000-2003-XP
Idioma
Arabic
Versión Driver
60.34.78.41
Tamaño
5.3Mb
Nombre del archivo
clj2550pswin2kxp2003-ar.exe
Información
Enhancements

Incorporated JPEG compression to reduce spool file size.
Resolves spoolsv.exe crash when printing some PowerPoint documents.
Control Panel simulator in the Services tab is now functional.

This section will help you in the download of the software to your computer and start you on the install process.
Before proceeding with the software installation, the printer must first be properly set up, and your computer must be ready to print.

DOWNLOAD AND EXTRACT THE SOFTWARE

Close any screen savers, virus protection programs, or other software programs running on your computer.
Click on Download Now and a File Download box will appear.
Select Save This Program to Disk and a Save As box will appear.
Select a directory to save the file in and click Save.
Locate the file using Windows Explorer when the download has completed.
Double click on the file. This will extract all the driver files into a directory on your hard drive. The directory these files are extracted to will have a similar name to the file that was downloaded (i.e., c:\clj2550ps). However, you can change the path and directory name at the time of extracting the file.
PLEASE USE THESE STEPS IF YOU ARE UPDATING THE HP COLOR LASERJET 2550 DRIVER
From the Windows XP desktop, click Start, and then Printers and Faxes (for Windows 2000, click Start, Settings and then Printers).
Right click on the hp color LaserJet 2550 PostScript icon or listing, and then click Properties.
Click the Advanced tab.
Make certain the Driver box displays hp color LaserJet 2550 PostScript, and then click New Driver.
In the Add Printer Driver Wizard window, click Have Disk, and then Browse.
Browse to the directory that the downloaded files where unzipped to.

NOTE: The default directory would be c:\clj2550pswin2kxp2003-xx (xx represents language, such as en for English)

The Look in box will display clj2550pswin2kxp2003-xx (xx represents language, such as en for English). Do not open any folders in this directory. The autorun.ini file should be in the File name box. Click Open.
On the Install From Disk window, click OK. The print driver name, hp color LaserJet 2550 PostScript, should be displayed. Click Next to continue.
When the update is finished, click OK to close the hp color LaserJet 2550 PostScript Properties window. The update is now complete.
PLEASE USE THESE STEPS IF THIS IS A FIRST TIME INSTALLATION OF THE HP COLOR LASERJET 2550 DRIVER:
Attach a USB or parallel cable to the printer and the computer.
The "Found New Hardware Wizard" should appear. Note: If attaching via a parallel cable it may be necessary to restart the computer for the "Found New Hardware Wizard" to appear.
For Windows XP
Choose "Install from a list or specific location (advanced)" and then click Next.
Select only the box next to "Include this location in the search" (clear all other check boxes) then click the browse button to locate the directory where the driver was extracted to in the steps above. The directory these files are extracted to will have a similar name to the file that was downloaded (i.e., c:\clj2550ps).
Click once on the directory name to highlight it then choose OK. The directory path then appears in the dialog.
Select the Next button. Files will be copied to the appropriate directories automatically.
Click the Finish button within the "New Hardware Wizard"
After several moments and message will appear on the system tray (at the bottom right of the screen near the clock) indicating that "Your new hardware has been installed and is ready to use.

For Windows 2000
Click the Next button to continue.
Choose "Search for a suitable driver form my device (recommended)" and then click Next.
Select only the box next to "Specify a location" (clear all other check boxes) and click Next.
Click the browse button to locate the directory where the driver was extracted to in the steps above. The directory these files are extracted to will have a similar name to the file that was downloaded (i.e., c:\clj2550ps).
Click once on the directory name to highlight it and then select the Open button.
Autorun.inf should appear in the "file name" box. Click the Open button.
Select OK. The wizard will find the driver for the device.
Click the Next button.
Click Finish. Several dialogs will appear and then disappear.
The printer driver is now installed.
Compañía
Hewlett Packard
Dispositivo
Impresoras y Plotters
Modelo
Hewlett Packard HP Color LaserJet 2550Ln
Descripción
Universal Print Driver PCL 5
Sistema Operativo
Windows 2000-2003-XP-Vista
Idioma
Arabic
Versión Driver
4.5
Tamaño
17.8Mb
Nombre del archivo
hpupd45pcl532.exe
Fecha
1 Apr 2008
Información
The UPD version 4.5 is the latest version of HP's Universal Print Driver. Please review the entire documentation for information on issues resolved, performance improvements, and new behavior changes to the UPD.
Compañía
Hewlett Packard
Dispositivo
Impresoras y Plotters
Modelo
Hewlett Packard HP Color LaserJet 2550Ln
Descripción
Universal Print Driver PostScript
Sistema Operativo
Windows 2000-2003-XP-Vista
Idioma
Arabic
Versión Driver
4.5
Tamaño
18.6Mb
Nombre del archivo
hpupd45ps32.exe
Fecha
1 Apr 2008
Información
The UPD version 4.5 is the latest version of HP's Universal Print Driver. Please review the entire documentation for information on issues resolved, performance improvements, and new behavior changes to the UPD.
Compañía
Hewlett Packard
Dispositivo
Impresoras y Plotters
Modelo
Hewlett Packard HP Color LaserJet 2550Ln
Descripción
PCL6 Driver
Sistema Operativo
Windows 2000-2003-XP-Vista
Idioma
Arabic
Versión Driver
4.5
Tamaño
18Mb
Nombre del archivo
hpupd45pcl632.exe
Fecha
1 Apr 2008
Información
The UPD version 4.5 is the latest version of HP's Universal Print Driver. Please review the entire documentation for information on issues resolved, performance improvements, and new behavior changes to the UPD.
Compañía
Hewlett Packard
Dispositivo
Impresoras y Plotters
Modelo
Hewlett Packard HP Color LaserJet 2550Ln
Descripción
PCL5 Driver
Sistema Operativo
Windows 2003 64 bits-XP 64 bits-Vista 64 bits
Idioma
Arabic
Versión Driver
4.5
Tamaño
18.2Mb
Nombre del archivo
hpupd45pcl564.exe
Fecha
1 Apr 2008
Información
The UPD version 4.5 is the latest version of HP's Universal Print Driver. Please review the entire documentation for information on issues resolved, performance improvements, and new behavior changes to the UPD.
Compañía
Hewlett Packard
Dispositivo
Impresoras y Plotters
Modelo
Hewlett Packard HP Color LaserJet 2550Ln
Descripción
Universal Print Driver x64 PostScript
Sistema Operativo
Windows 2003 64 bits-XP 64 bits-Vista 64 bits
Idioma
Arabic
Versión Driver
4.5
Tamaño
19Mb
Nombre del archivo
hpupd45ps64.exe
Fecha
1 Apr 2008
Información
The UPD version 4.5 is the latest version of HP's Universal Print Driver. Please review the entire documentation for information on issues resolved, performance improvements, and new behavior changes to the UPD.
Compañía
Hewlett Packard
Dispositivo
Impresoras y Plotters
Modelo
Hewlett Packard HP Color LaserJet 2550Ln
Descripción
PCL6 Driver
Sistema Operativo
Windows 2003 64 bits-XP 64 bits-Vista 64 bits
Idioma
Arabic
Versión Driver
4.5
Tamaño
18.2Mb
Nombre del archivo
hpupd45pcl664.exe
Fecha
1 Apr 2008
Información
The UPD version 4.5 is the latest version of HP's Universal Print Driver. Please review the entire documentation for information on issues resolved, performance improvements, and new behavior changes to the UPD.
Compañía
Hewlett Packard
Dispositivo
Impresoras y Plotters
Modelo
Hewlett Packard HP Color LaserJet 2550Ln
Descripción
Firmware Update utility
Sistema Operativo
Windows 98-Me-2000-XP
Idioma
Arabic
Versión Firmware
20040930
Tamaño
6.2Mb
Nombre del archivo
flash_5f2550_20040930_rev2.exe
Fecha
11 Oct 2004
Información
WARNING: Determine what the current firmware version of your printer is before downloading the update. If your printer already has the current version (20040930), downloading this file might cause possible performance issues. To determine the version of firmware of your HP Color LaserJet 2550 printer, print a Configuration Page by pressing the Go button (green) and the Cancel button (Red) on the printer's control panel. The firmware version is listed on the top left part of the page, under Product Information - Firmware Datecode.
Firmware Enhancements

These changes are implemented in the new version firmware 20040930:
Default screenmatch color treatment for non-driver PostScript jobs.
Enabled to set FONTSOURCE to a downloaded soft font via PJL.
Cyrillic/Greek/Hebrew font settings now available
Improved memory allocation for complex pages.
The default I/O timeout changed to 120 seconds.
Printing from Mac systems, and printing PDF files, will have an improved CMYK color adjustment.
Calibration will now occur on non-HP refilled cartridge that have the e-label set to "toner out".
Unexpected Paper Size messages are now bypassed by pressing Go or Cancel from the Toolbox utility.
The Supplies Status page will now include the part number for HP cartridges when recognizing a non-HP cartridge installed.
Monochrome print speed will increase by choosing "Print to Grayscale" in the driver's Color tab

Note: This utility is in English only.

* The HP Color LaserJet 2550 series Firmware Update Utility can be performed using either a Parallel or USB port.
When using the USB port, the HP Color LaserJet 2550 series software must be installed prior to using this utility.
When using the parallel port, the HP Color LaserJet 2550 series software does not need to be installed. Connect the 2550 series printer to a PC with the Firmware Update Utility loaded using a parallel cable.
* You will need 20MB of disk space to use the Firmware Update Utility.

* The HP Color LaserJet 2550 series printer must be in a READY state and remain powered on during the entire firmware update process.

* Administrator Privileges are required on the PC executing the utility.

* The control panel of the printer will display a series of flashing lights.

* After the Firmware Update Utility has finished, the HP Color LaserJet 2550 series printer will display a solid green Ready light (second from the bottom). Depending on the operating system on your PC, you may be prompted to reboot your computer.

This utility is for use on Windows 95, 98, ME, 2000 and XP. It can ONLY be used with parallel or USB connections.


Installation Instructions

* For users connected via the network, please temporarily disconnect your HP Color LaserJet 2550 series printer from the network to ensure the network devices to not interrupt the firmware upgrade process.

Parallel Cable connection
Connect a PC to the HP Color LaserJet 2550 series printer via a parallel cable.
You do not need to install the HP software for parallel upgrades.
If the "Add Hardware" wizard starts when you plug in the parallel cable, you can safely cancel it.
Double click the Flash Update utility.
Click 'OK' to begin the process. The utility will go through the following steps:
Close all toolbox and HP software running on the host PC.
Upload firmware to printer, at which point the printer lights will start flashing until complete.
Printer will then erase the old firmware and write the new firmware and reboot it.
Utility will prompt user to reboot PC (to synchronize the printer, restart Toolbox and the HP software)
DO NOT POWER CYCLE THE PRINTER during the upgrade process or it will leave your printer in an unusable state.
Once the utility is complete, it will prompt you to reboot your PC and printer to synchronize the printer and the HP Toolbox.
The firmware update can take up to 5 minutes to complete. Please be patient.
USB Connection
In order to use USB to update your printer, you must have the HP Color LaserJet 2550 series printer software installed on your PC.
You do NOT need to have toolbox installed. A driver only installation will work fine.
Ensure your HP Color LaserJet 2550 series printer is connected to the USB cable.
Double click the Flash Update utility.
Click 'OK' to begin the process. The utility will go through the following steps:
Close all Toolbox and HP software running on host PC.
Upload firmware to printer, at which point the printer lights will flash until complete.
Printer will then erase the old firmware and write the new firmware and reboot itself.
Utility will prompt user to reboot PC (to resync printer, restart toolbox and HP software)
DO NOT POWER CYCLE THE PRINTER during the upgrade process or it will leave your printer in an unusable state.
Once the utility is complete, it will prompt you to reboot your PC and printer to resync the printer and the HP Toolbox.
The firmware update can take up to 5 minutes to complete. Please be patient.
Compañía
Hewlett Packard
Dispositivo
Impresoras y Plotters
Modelo
Hewlett Packard HP Color LaserJet 2550Ln
Descripción
PostScript Driver
Sistema Operativo
Windows NT4
Idioma
Arabic
Versión Driver
034.4100
Tamaño
1Mb
Nombre del archivo
clj2550pswinnt4-ar.exe
Información
This section will help you in the download of the software to your computer and start you on the install process.
Before proceeding with the software installation, the printer must first be properly set up, and your computer must be ready to print.
Turn on the printer first, then turn on the computer.
Close any screen savers, virus protection programs, or other software programs running on your computer.
Click on Download Now and a File Download box will appear.
Select Save This Program to Disk and a Save As box will appear.
Select a directory to save the file in and click Save.
Locate the file using Windows Explorer when the download has completed.
Double click on the file. This will extract all the driver files into a directory on your hard drive. The directory these files are extracted to will have a similar name to the file that was downloaded (i.e., c:\clj2550ps). However, you can change the path and directory name at the time of extracting the file.
Open the Printers Window (Click Start-Settings-Printers).
Update the printer if it was previously installed
Right click on the printer and select Properties from the pop menu.
On the General tab, select New Driver.
Click on the Warning Box that pops up.
A printer listing box will appear. Select Have Disk.
Another box Install from Disk appears.
Click the Browse to locate the expanded files directory (i.e., c:\clj2550ps).
Click on the file ending with .inf .
Click Open and then OK and let files install.
Add the printer if it hasn't been installed yet.
Click Add New Printer
Follow the instructions of the Add Printer Wizard.
Compañía
Hewlett Packard
Dispositivo
Impresoras y Plotters
Modelo
Hewlett Packard HP Color LaserJet 2550Ln
Descripción
PCL6 Driver
Sistema Operativo
Windows NT4
Idioma
Arabic
Versión Driver
4.24.2550.400
Tamaño
2.9Mb
Nombre del archivo
clj2550pcl6winnt4-ar.exe
Información
This section will help you in the download of the software to your computer and start you on the install process.
Before proceeding with the software installation, the printer must first be properly set up, and your computer must be ready to print.
Turn on the printer first, then turn on the computer.
Close any screen savers, virus protection programs, or other software programs running on your computer.
Click on Download Now and a File Download box will appear.
Select Save This Program to Disk and a Save As box will appear.
Select a directory to save the file in and click Save.
Locate the file using Windows Explorer when the download has completed.
Double click on the file. This will extract all the driver files into a directory on your hard drive. The directory these files are extracted to will have a similar name to the file that was downloaded (i.e., c:\clj2550pcl6). However, you can change the path and directory name at the time of extracting the file.
Open the Printers Window (Click Start-Settings-Printers).
Update the printer if it was previously installed
Right click on the printer and select Properties from the pop menu.
On the General tab, select New Driver.
Click on the Warning Box that pops up.
A printer listing box will appear. Select Have Disk.
Another box Install from Disk appears.
Click the Browse to locate the expanded files directory (i.e., c:\clj2550pcl6).
Click on the file ending with .inf .
Click Open and then OK and let files install.
Add the printer if it hasn't been installed yet.
Click Add New Printer
Follow the instructions of the Add Printer Wizard.
Compañía
Hewlett Packard
Dispositivo
Impresoras y Plotters
Modelo
Hewlett Packard HP Color LaserJet 2550Ln
Descripción
Universal Print Driver PCL 5
Sistema Operativo
Windows 2000-2003-XP-Vista
Idioma
Catalan
Versión Driver
4.5
Tamaño
17.8Mb
Nombre del archivo
hpupd45pcl532.exe
Fecha
1 Apr 2008
Información
The UPD version 4.5 is the latest version of HP's Universal Print Driver. Please review the entire documentation for information on issues resolved, performance improvements, and new behavior changes to the UPD.
Compañía
Hewlett Packard
Dispositivo
Impresoras y Plotters
Modelo
Hewlett Packard HP Color LaserJet 2550Ln
Descripción
Universal Print Driver PostScript
Sistema Operativo
Windows 2000-2003-XP-Vista
Idioma
Catalan
Versión Driver
4.5
Tamaño
18.6Mb
Nombre del archivo
hpupd45ps32.exe
Fecha
1 Apr 2008
Información
The UPD version 4.5 is the latest version of HP's Universal Print Driver. Please review the entire documentation for information on issues resolved, performance improvements, and new behavior changes to the UPD.
Compañía
Hewlett Packard
Dispositivo
Impresoras y Plotters
Modelo
Hewlett Packard HP Color LaserJet 2550Ln
Descripción
PCL6 Driver
Sistema Operativo
Windows 2000-2003-XP-Vista
Idioma
Catalan
Versión Driver
4.5
Tamaño
18Mb
Nombre del archivo
hpupd45pcl632.exe
Fecha
1 Apr 2008
Información
The UPD version 4.5 is the latest version of HP's Universal Print Driver. Please review the entire documentation for information on issues resolved, performance improvements, and new behavior changes to the UPD.
Compañía
Hewlett Packard
Dispositivo
Impresoras y Plotters
Modelo
Hewlett Packard HP Color LaserJet 2550Ln
Descripción
PCL6 Driver
Sistema Operativo
Windows 2003 64 bits-XP 64 bits-Vista 64 bits
Idioma
Catalan
Versión Driver
4.5
Tamaño
18.2Mb
Nombre del archivo
hpupd45pcl664.exe
Fecha
1 Apr 2008
Información
The UPD version 4.5 is the latest version of HP's Universal Print Driver. Please review the entire documentation for information on issues resolved, performance improvements, and new behavior changes to the UPD.
Compañía
Hewlett Packard
Dispositivo
Impresoras y Plotters
Modelo
Hewlett Packard HP Color LaserJet 2550Ln
Descripción
Universal Print Driver x64 PostScript
Sistema Operativo
Windows 2003 64 bits-XP 64 bits-Vista 64 bits
Idioma
Catalan
Versión Driver
4.5
Tamaño
19Mb
Nombre del archivo
hpupd45ps64.exe
Fecha
1 Apr 2008
Información
The UPD version 4.5 is the latest version of HP's Universal Print Driver. Please review the entire documentation for information on issues resolved, performance improvements, and new behavior changes to the UPD.
Compañía
Hewlett Packard
Dispositivo
Impresoras y Plotters
Modelo
Hewlett Packard HP Color LaserJet 2550Ln
Descripción
PCL5 Driver
Sistema Operativo
Windows 2003 64 bits-XP 64 bits-Vista 64 bits
Idioma
Catalan
Versión Driver
4.5
Tamaño
18.2Mb
Nombre del archivo
hpupd45pcl564.exe
Fecha
1 Apr 2008
Información
The UPD version 4.5 is the latest version of HP's Universal Print Driver. Please review the entire documentation for information on issues resolved, performance improvements, and new behavior changes to the UPD.
Compañía
Hewlett Packard
Dispositivo
Impresoras y Plotters
Modelo
Hewlett Packard HP Color LaserJet 2550Ln
Descripción
Printing software and utility
Sistema Operativo
Mac OS 9
Idioma
Chinese Simplified
Versión Utilities
4.1
Tamaño
4Mb
Nombre del archivo
clj2550mac9_x-sc.sit
Información
The HP LaserJet Installer provides HP LaserJet PostScript printing support for the Mac 9.1 and 9.2 operating systems.
Compañía
Hewlett Packard
Dispositivo
Impresoras y Plotters
Modelo
Hewlett Packard HP Color LaserJet 2550Ln
Descripción
Installer
Sistema Operativo
Mac OS 9
Idioma
Chinese Simplified
Versión Driver
4.1
Tamaño
4Mb
Nombre del archivo
clj2550installer-sc.sit
Información
HP Color LaserJet 2550 Installer for Mac OS 9.

Compañía
Hewlett Packard
Dispositivo
Impresoras y Plotters
Modelo
Hewlett Packard HP Color LaserJet 2550Ln
Descripción
Firmware Update utility
Sistema Operativo
Mac OS X
Idioma
Chinese Simplified
Versión Firmware
20040930
Tamaño
5.6Mb
Nombre del archivo
2550_fw_update20040930.dmg
Fecha
28 Jul 2005
Información
WARNING: Determine what the current firmware version of your printer is before downloading the update. If your printer already has the current version (20040930), downloading this file might cause possible performance issues. To determine the version of firmware of your HP Color LaserJet 2550 printer, print a Configuration Page by pressing the Go button (green) and the Cancel button (Red) on the printer's control panel. The firmware version is listed on the top left part of the page, under Product Information - Firmware Datecode.

Firmware Enhancements

These changes are implemented in the new version firmware 20040930:
Default screenmatch color treatment for non-driver PostScript jobs.
Enabled to set FONTSOURCE to a downloaded soft font via PJL.
Cyrillic/Greek/Hebrew font settings now available
Improved memory allocation for complex pages.
The default I/O timeout changed to 120 seconds.
Printing from Mac systems, and printing PDF files, will have an improved CMYK color adjustment.
Calibration will now occur on non-HP refilled cartridge that have the e-label set to "toner out".
Unexpected Paper Size messages are now bypassed by pressing Go or Cancel from the Toolbox utility.
The Supplies Status page will now include the part number for HP cartridges when recognizing a non-HP cartridge installed.
Monochrome print speed will increase by choosing "Print to Grayscale" in the driver's Color tab.

Note: This utility is in English only.

* You will need 20MB of disk space to use the Firmware Update Utility.

* The HP Color LaserJet 2550 series printer must be in a READY state and remain powered on during the entire firmware update process.

* The control panel of the printer will display a series of flashing lights.

* After the Firmware Update Utility has finished, the HP Color LaserJet 2550 series printer will display a solid green Ready light (second from the bottom). You may be prompted to reboot your computer.


Installation Instructions

(NOTE! If you use Internet Explorer to download the utility, it may strip the .dmg extension to the file. Simply re-add the .dmg extension and MAC OS X should recognize the file as a disk image)

This utility is for use on any OS X 10.2 or 10.3 Mac. It will NOT function in the MAC OS 9 environment.

It can only be used with a USB connection to the HP Color LaserJet 2550.

Instructions for upgrade

* For users connected via the network, please temporarily disconnect your HP Color LaserJet 2550 series printer from the network to ensure the network devices to not interrupt the FW upgrade process.
Mount the disk image containing the FW update.
Run the FW Update Application contained in the disk image.
Follow the onscreen prompts to continue.
When prompted, connect the printer via USB.
Upon finding an HP Color LaserJet 2550 series printer, the utility will prompt you to reboot the printer by simply turn the power off and back on. This ensures the printer is in a proper state to receive the update.
Once the printer has been rebooted, the utility will allow you to 'download' the firmware to the HP Color LaserJet 2550 series printer.
DO NOT POWER CYCLE THE PRINTER during the upgrade process or it will leave your printer in an unusable state.
One green LED will start flashing initially followed by 2 LED's flashing.
Once the LEDS stop flashing, the printer has updated and re-initialized, the firmware should be updated.
The firmware update can take up to 5 minutes to complete. Please be patient.
Compañía
Hewlett Packard
Dispositivo
Impresoras y Plotters
Modelo
Hewlett Packard HP Color LaserJet 2550Ln
Descripción
Installer Print Only Software Solution for v10.2 v10.3.x v10.4.x v10.5
Sistema Operativo
Mac OS X
Idioma
Chinese Simplified
Versión Driver
7.8.0.761
Tamaño
29.1Mb
Nombre del archivo
hp_laserjet_and_edgeline_print-only.dmg
Fecha
28 Jan 2008
Información
This download package contains HP LaserJet Mac OS X Installer Print Only Software Solution v7.8.0.761. Included are the HP Postscript PPD and PDE files for Mac OS X v10.2, v10.3.x, v10.4.x, v10.5 - PPC and Intel processor.
Supported Devices
HP color LaserJet 2500
HP color LaserJet 2550 series
HP color LaserJet 3700
HP color LaserJet 4600
HP color LaserJet 4650
HP color LaserJet 5500
HP Color LaserJet 5550
HP Color LaserJet 8500
HP Color LaserJet 8550
HP color LaserJet 9500
HP color LaserJet 9500 MFP
HP Color LaserJet
HP Color LaserJet 5/5M
HP Color LaserJet 4500
HP Color LaserJet 4550
HP LaserJet 1200
HP LaserJet 1300
HP LaserJet 1300n
HP LaserJet 1320 series
HP LaserJet 2100 Series
HP LaserJet 2200
HP LaserJet 4000 Series
HP LaserJet 4050 Series
HP LaserJet 4100 MFP
HP LaserJet 4100 Series
HP LaserJet 4200
HP LaserJet 4200L
HP LaserJet 4240
HP LaserJet 4240N
HP LaserJet 4250
HP LaserJet 4250L
HP LaserJet 4300
HP LaserJet 4350
HP LaserJet 4350L
HP LaserJet 4V
HP LaserJet 5000 Series
HP LaserJet 5100 Series
HP LaserJet 8000 Series
HP LaserJet 8100 Series
HP LaserJet 8150 Series
HP LaserJet 9000 MFP
HP LaserJet 9000L MFP
HP LaserJet 9000 Series
HP LaserJet 9040
HP LaserJet 9040 MFP
HP LaserJet 9050 MFP
HP LaserJet 9050
HP LaserJet 9055 mfp
HP LaserJet 9065 mfp
HP LaserJet 4 Plus
HP LaserJet 4ML
HP LaserJet 4MP
HP LaserJet 4Si
HP LaserJet 5M
HP LaserJet 5P
HP LaserJet 5Si
HP LaserJet 5Si Mopier
HP LaserJet 6P
HP Mopier 240
HP Mopier 320
HP LaserJet 1220
HP LaserJet 3015
HP LaserJet 3020
HP LaserJet 3030
HP LaserJet 3200
HP LaserJet 3300/3310/3320
HP LaserJet 3300
HP LaserJet 3380
HP business inkjet 2300
HP Business Inkjet 2600
HP Business Inkjet 2800
HP Business Inkjet 3000
HP officejet 9100 series
HP Business Inkjet 2250
HP Business Inkjet 2280
Compañía
Hewlett Packard
Dispositivo
Impresoras y Plotters
Modelo
Hewlett Packard HP Color LaserJet 2550Ln
Descripción
PostScript Driver
Sistema Operativo
Windows 2000-2003-XP
Idioma
Chinese Simplified
Versión Driver
60.34.78.41
Tamaño
5.3Mb
Nombre del archivo
clj2550pswin2kxp2003-sc.exe
Información
Enhancements

Incorporated JPEG compression to reduce spool file size.
Resolves spoolsv.exe crash when printing some PowerPoint documents.
Control Panel simulator in the Services tab is now functional.

This section will help you in the download of the software to your computer and start you on the install process.
Before proceeding with the software installation, the printer must first be properly set up, and your computer must be ready to print.

DOWNLOAD AND EXTRACT THE SOFTWARE

Close any screen savers, virus protection programs, or other software programs running on your computer.
Click on Download Now and a File Download box will appear.
Select Save This Program to Disk and a Save As box will appear.
Select a directory to save the file in and click Save.
Locate the file using Windows Explorer when the download has completed.
Double click on the file. This will extract all the driver files into a directory on your hard drive. The directory these files are extracted to will have a similar name to the file that was downloaded (i.e., c:\clj2550ps). However, you can change the path and directory name at the time of extracting the file.
PLEASE USE THESE STEPS IF YOU ARE UPDATING THE HP COLOR LASERJET 2550 DRIVER
From the Windows XP desktop, click Start, and then Printers and Faxes (for Windows 2000, click Start, Settings and then Printers).
Right click on the hp color LaserJet 2550 PostScript icon or listing, and then click Properties.
Click the Advanced tab.
Make certain the Driver box displays hp color LaserJet 2550 PostScript, and then click New Driver.
In the Add Printer Driver Wizard window, click Have Disk, and then Browse.
Browse to the directory that the downloaded files where unzipped to.

NOTE: The default directory would be c:\clj2550pswin2kxp2003-xx (xx represents language, such as en for English)

The Look in box will display clj2550pswin2kxp2003-xx (xx represents language, such as en for English). Do not open any folders in this directory. The autorun.ini file should be in the File name box. Click Open.
On the Install From Disk window, click OK. The print driver name, hp color LaserJet 2550 PostScript, should be displayed. Click Next to continue.
When the update is finished, click OK to close the hp color LaserJet 2550 PostScript Properties window. The update is now complete.
PLEASE USE THESE STEPS IF THIS IS A FIRST TIME INSTALLATION OF THE HP COLOR LASERJET 2550 DRIVER:
Attach a USB or parallel cable to the printer and the computer.
The "Found New Hardware Wizard" should appear. Note: If attaching via a parallel cable it may be necessary to restart the computer for the "Found New Hardware Wizard" to appear.
For Windows XP
Choose "Install from a list or specific location (advanced)" and then click Next.
Select only the box next to "Include this location in the search" (clear all other check boxes) then click the browse button to locate the directory where the driver was extracted to in the steps above. The directory these files are extracted to will have a similar name to the file that was downloaded (i.e., c:\clj2550ps).
Click once on the directory name to highlight it then choose OK. The directory path then appears in the dialog.
Select the Next button. Files will be copied to the appropriate directories automatically.
Click the Finish button within the "New Hardware Wizard"
After several moments and message will appear on the system tray (at the bottom right of the screen near the clock) indicating that "Your new hardware has been installed and is ready to use.

For Windows 2000
Click the Next button to continue.
Choose "Search for a suitable driver form my device (recommended)" and then click Next.
Select only the box next to "Specify a location" (clear all other check boxes) and click Next.
Click the browse button to locate the directory where the driver was extracted to in the steps above. The directory these files are extracted to will have a similar name to the file that was downloaded (i.e., c:\clj2550ps).
Click once on the directory name to highlight it and then select the Open button.
Autorun.inf should appear in the "file name" box. Click the Open button.
Select OK. The wizard will find the driver for the device.
Click the Next button.
Click Finish. Several dialogs will appear and then disappear.
The printer driver is now installed.
Compañía
Hewlett Packard
Dispositivo
Impresoras y Plotters
Modelo
Hewlett Packard HP Color LaserJet 2550Ln
Descripción
PCL6 Driver
Sistema Operativo
Windows 2000-2003-XP
Idioma
Chinese Simplified
Versión Driver
60.34.78.41
Tamaño
5.5Mb
Nombre del archivo
clj2550pcl6win2kxp2003-zhcn.exe
Información
Enhancements

Incorporated JPEG compression to reduce spool file size.
Resolves spoolsv.exe crash when printing some PowerPoint documents.
Control Panel simulator in the Services tab is now functional.

This section will help you in the download of the software to your computer and start you on the install process.
Before proceeding with the software installation, the printer must first be properly set up, and your computer must be ready to print.

DOWNLOAD AND EXTRACT THE SOFTWARE

Close any screen savers, virus protection programs, or other software programs running on your computer.
Click on Download Now and a File Download box will appear.
Select Save This Program to Disk and a Save As box will appear.
Select a directory to save the file in and click Save.
Locate the file using Windows Explorer when the download has completed.
Double click on the file. This will extract all the driver files into a directory on your hard drive. The directory these files are extracted to will have a similar name to the file that was downloaded (i.e., c:\clj2550pcl6). However, you can change the path and directory name at the time of extracting the file.
PLEASE USE THESE STEPS IF YOU ARE UPDATING THE HP COLOR LASERJET 2550 DRIVER
From the Windows XP desktop, click Start, and then Printers and Faxes (for Windows 2000, click Start, Settings and then Printers).
Right click on the hp color LaserJet 2550 PCL6 icon or listing, and then click Properties.
Click the Advanced tab.
Make certain the Driver box displays hp color LaserJet 2550 PCL6, and then click New Driver.
In the Add Printer Driver Wizard window, click Have Disk, and then Browse.
Browse to the directory that the downloaded files where unzipped to.

NOTE: The default directory would be C:\clj2550pcl6 (xx represents language, such as en for English)

The Look in box will display clj2550pcl6win2kxp2003-xx (xx represents language, such as en for English). Do not open any folders in this directory. The autorun.ini file should be in the File name box. Click Open.
On the Install From Disk window, click OK. The print driver name, hp color LaserJet 2550 PCL6, should be displayed. Click Next to continue.
When the update is finished, click OK to close the hp color LaserJet 2550 PCL6 Properties window. The update is now complete.
PLEASE USE THESE STEPS IF THIS IS A FIRST TIME INSTALLATION OF THE HP COLOR LASERJET 2550 DRIVER:
Attach a USB or parallel cable to the printer and the computer.
The "Found New Hardware Wizard" should appear. Note: If attaching via a parallel cable it may be necessary to restart the computer for the "Found New Hardware Wizard" to appear.
For Windows XP
Choose "Install from a list or specific location (advanced)" and then click Next.
Select only the box next to "Include this location in the search" (clear all other check boxes) then click the browse button to locate the directory where the driver was extracted to in the steps above. The directory these files are extracted to will have a similar name to the file that was downloaded (i.e., c:\clj2550pcl6).
Click once on the directory name to highlight it then choose OK. The directory path then appears in the dialog.
Select the Next button. Files will be copied to the appropriate directories automatically.
Click the Finish button within the "New Hardware Wizard"
After several moments and message will appear on the system tray (at the bottom right of the screen near the clock) indicating that "Your new hardware has been installed and is ready to use.

For Windows 2000
Click the Next button to continue.
Choose "Search for a suitable driver form my device (recommended)" and then click Next.
Select only the box next to "Specify a location" (clear all other check boxes) and click Next.
Click the browse button to locate the directory where the driver was extracted to in the steps above. The directory these files are extracted to will have a similar name to the file that was downloaded (i.e., c:\clj2550pcl6).
Click once on the directory name to highlight it and then select the Open button.
Autorun.inf should appear in the "file name" box. Click the Open button.
Select OK. The wizard will find the driver for the device.
Click the Next button.
Click Finish. Several dialogs will appear and then disappear.
The printer driver is now installed.
Compañía
Hewlett Packard
Dispositivo
Impresoras y Plotters
Modelo
Hewlett Packard HP Color LaserJet 2550Ln
Descripción
Universal Print Driver PostScript
Sistema Operativo
Windows 2000-2003-XP-Vista
Idioma
Chinese Simplified
Versión Driver
4.5
Tamaño
18.6Mb
Nombre del archivo
hpupd45ps32.exe
Fecha
1 Apr 2008
Información
The UPD version 4.5 is the latest version of HP's Universal Print Driver. Please review the entire documentation for information on issues resolved, performance improvements, and new behavior changes to the UPD.
Compañía
Hewlett Packard
Dispositivo
Impresoras y Plotters
Modelo
Hewlett Packard HP Color LaserJet 2550Ln
Descripción
PCL6 Driver
Sistema Operativo
Windows 2000-2003-XP-Vista
Idioma
Chinese Simplified
Versión Driver
4.5
Tamaño
18Mb
Nombre del archivo
hpupd45pcl632.exe
Fecha
1 Apr 2008
Información
The UPD version 4.5 is the latest version of HP's Universal Print Driver. Please review the entire documentation for information on issues resolved, performance improvements, and new behavior changes to the UPD.
Compañía
Hewlett Packard
Dispositivo
Impresoras y Plotters
Modelo
Hewlett Packard HP Color LaserJet 2550Ln
Descripción
Universal Print Driver PCL 5
Sistema Operativo
Windows 2000-2003-XP-Vista
Idioma
Chinese Simplified
Versión Driver
4.5
Tamaño
17.8Mb
Nombre del archivo
hpupd45pcl532.exe
Fecha
1 Apr 2008
Información
The UPD version 4.5 is the latest version of HP's Universal Print Driver. Please review the entire documentation for information on issues resolved, performance improvements, and new behavior changes to the UPD.
Compañía
Hewlett Packard
Dispositivo
Impresoras y Plotters
Modelo
Hewlett Packard HP Color LaserJet 2550Ln
Descripción
PCL5 Driver
Sistema Operativo
Windows 2003 64 bits-XP 64 bits-Vista 64 bits
Idioma
Chinese Simplified
Versión Driver
4.5
Tamaño
18.2Mb
Nombre del archivo
hpupd45pcl564.exe
Fecha
1 Apr 2008
Información
The UPD version 4.5 is the latest version of HP's Universal Print Driver. Please review the entire documentation for information on issues resolved, performance improvements, and new behavior changes to the UPD.
Compañía
Hewlett Packard
Dispositivo
Impresoras y Plotters
Modelo
Hewlett Packard HP Color LaserJet 2550Ln
Descripción
PCL6 Driver
Sistema Operativo
Windows 2003 64 bits-XP 64 bits-Vista 64 bits
Idioma
Chinese Simplified
Versión Driver
4.5
Tamaño
18.2Mb
Nombre del archivo
hpupd45pcl664.exe
Fecha
1 Apr 2008
Información
The UPD version 4.5 is the latest version of HP's Universal Print Driver. Please review the entire documentation for information on issues resolved, performance improvements, and new behavior changes to the UPD.
Compañía
Hewlett Packard
Dispositivo
Impresoras y Plotters
Modelo
Hewlett Packard HP Color LaserJet 2550Ln
Descripción
Universal Print Driver x64 PostScript
Sistema Operativo
Windows 2003 64 bits-XP 64 bits-Vista 64 bits
Idioma
Chinese Simplified
Versión Driver
4.5
Tamaño
19Mb
Nombre del archivo
hpupd45ps64.exe
Fecha
1 Apr 2008
Información
The UPD version 4.5 is the latest version of HP's Universal Print Driver. Please review the entire documentation for information on issues resolved, performance improvements, and new behavior changes to the UPD.
Compañía
Hewlett Packard
Dispositivo
Impresoras y Plotters
Modelo
Hewlett Packard HP Color LaserJet 2550Ln
Descripción
PCL6 Plug and Play Bundle
Sistema Operativo
Windows 98-Me-2000-2003-XP
Idioma
Chinese Simplified
Versión Driver
2.0
Tamaño
11.6Mb
Nombre del archivo
clj2550pcl6-sc.exe
Información
Use this software for first time USB installations only. Do NOT attach USB cable until prompted by the installation program

If upgrading a previous installation please use the "HP Color LaserJet 2550 PCL6 driver" download and view the description which includes instructions for updating the driver.

HP Color LaserJet 2550 PCL6 Plug and Play Bundle provides the following:

An installation program to assist with installation.
The print drivers are the same as those found on the version 2.0 CD.
Windows 98/ME: 4.24.2550.400
Windows 2000/XP/2003: 60.034.78.41
Plug and Play installable drivers for 1284.4 communication with the device.
Plug and Play installable PCL6 printer driver.
The product CD can be used at a later time to install additional product software, such as Toolbox.
A silent install is provided by running the program from a DOS prompt with the following command line parameters:
lj2550pcl6-en.exe -s -a -silent

This section will help you in the download of the software to your computer and start you on the install process.
Before proceeding with the software installation, the printer must first be properly set up, and your computer must be ready to print.
Close any screen savers, virus protection programs, or other software programs running on your computer.
Click on Download Now and a File Download box will appear.
Select Save This Program to Disk and a Save As box will appear.
Select a directory to save the file in and click Save.
Locate the file using Windows Explorer when the download has completed.
Double click on the file. This will extract all the driver files into a directory on your hard drive. The default directory is Program Files\Hewlett-Packard\Color LaserJet 2550 Drivers. However, you can change the path and directory name at the time of extracting the file.
Follow the instructions presented by the installation program. Do NOT attach the USB cable to the printer until prompted by the installation program.
Compañía
Hewlett Packard
Dispositivo
Impresoras y Plotters
Modelo
Hewlett Packard HP Color LaserJet 2550Ln
Descripción
Firmware Update utility
Sistema Operativo
Windows 98-Me-2000-XP
Idioma
Chinese Simplified
Versión Firmware
20040930
Tamaño
6.2Mb
Nombre del archivo
flash_5f2550_20040930_rev2.exe
Fecha
11 Oct 2004
Información
WARNING: Determine what the current firmware version of your printer is before downloading the update. If your printer already has the current version (20040930), downloading this file might cause possible performance issues. To determine the version of firmware of your HP Color LaserJet 2550 printer, print a Configuration Page by pressing the Go button (green) and the Cancel button (Red) on the printer's control panel. The firmware version is listed on the top left part of the page, under Product Information - Firmware Datecode.
Firmware Enhancements

These changes are implemented in the new version firmware 20040930:
Default screenmatch color treatment for non-driver PostScript jobs.
Enabled to set FONTSOURCE to a downloaded soft font via PJL.
Cyrillic/Greek/Hebrew font settings now available
Improved memory allocation for complex pages.
The default I/O timeout changed to 120 seconds.
Printing from Mac systems, and printing PDF files, will have an improved CMYK color adjustment.
Calibration will now occur on non-HP refilled cartridge that have the e-label set to "toner out".
Unexpected Paper Size messages are now bypassed by pressing Go or Cancel from the Toolbox utility.
The Supplies Status page will now include the part number for HP cartridges when recognizing a non-HP cartridge installed.
Monochrome print speed will increase by choosing "Print to Grayscale" in the driver's Color tab

Note: This utility is in English only.

* The HP Color LaserJet 2550 series Firmware Update Utility can be performed using either a Parallel or USB port.
When using the USB port, the HP Color LaserJet 2550 series software must be installed prior to using this utility.
When using the parallel port, the HP Color LaserJet 2550 series software does not need to be installed. Connect the 2550 series printer to a PC with the Firmware Update Utility loaded using a parallel cable.
* You will need 20MB of disk space to use the Firmware Update Utility.

* The HP Color LaserJet 2550 series printer must be in a READY state and remain powered on during the entire firmware update process.

* Administrator Privileges are required on the PC executing the utility.

* The control panel of the printer will display a series of flashing lights.

* After the Firmware Update Utility has finished, the HP Color LaserJet 2550 series printer will display a solid green Ready light (second from the bottom). Depending on the operating system on your PC, you may be prompted to reboot your computer.

This utility is for use on Windows 95, 98, ME, 2000 and XP. It can ONLY be used with parallel or USB connections.


Installation Instructions

* For users connected via the network, please temporarily disconnect your HP Color LaserJet 2550 series printer from the network to ensure the network devices to not interrupt the firmware upgrade process.

Parallel Cable connection
Connect a PC to the HP Color LaserJet 2550 series printer via a parallel cable.
You do not need to install the HP software for parallel upgrades.
If the "Add Hardware" wizard starts when you plug in the parallel cable, you can safely cancel it.
Double click the Flash Update utility.
Click 'OK' to begin the process. The utility will go through the following steps:
Close all toolbox and HP software running on the host PC.
Upload firmware to printer, at which point the printer lights will start flashing until complete.
Printer will then erase the old firmware and write the new firmware and reboot it.
Utility will prompt user to reboot PC (to synchronize the printer, restart Toolbox and the HP software)
DO NOT POWER CYCLE THE PRINTER during the upgrade process or it will leave your printer in an unusable state.
Once the utility is complete, it will prompt you to reboot your PC and printer to synchronize the printer and the HP Toolbox.
The firmware update can take up to 5 minutes to complete. Please be patient.
USB Connection
In order to use USB to update your printer, you must have the HP Color LaserJet 2550 series printer software installed on your PC.
You do NOT need to have toolbox installed. A driver only installation will work fine.
Ensure your HP Color LaserJet 2550 series printer is connected to the USB cable.
Double click the Flash Update utility.
Click 'OK' to begin the process. The utility will go through the following steps:
Close all Toolbox and HP software running on host PC.
Upload firmware to printer, at which point the printer lights will flash until complete.
Printer will then erase the old firmware and write the new firmware and reboot itself.
Utility will prompt user to reboot PC (to resync printer, restart toolbox and HP software)
DO NOT POWER CYCLE THE PRINTER during the upgrade process or it will leave your printer in an unusable state.
Once the utility is complete, it will prompt you to reboot your PC and printer to resync the printer and the HP Toolbox.
The firmware update can take up to 5 minutes to complete. Please be patient.
Compañía
Hewlett Packard
Dispositivo
Impresoras y Plotters
Modelo
Hewlett Packard HP Color LaserJet 2550Ln
Descripción
Mobile Printing for Notebooks
Sistema Operativo
Windows NT4
Idioma
Chinese Simplified
Versión Driver
2.10
Tamaño
3.6Mb
Nombre del archivo
mobileprinting4notebooksnt4-sc.exe
Información
HP Mobile Printing for Notebooks (formally known as HP Mobile Printing Driver) is a software solution designed to facilitate printing from mobile notebook computers to network-connected Postscript-enabled HP printers.

As the notebook user moves around within the enterprise from floor to floor or from site to site, there is a need to print to networked printers that are encountered while away from the desk. HP Mobile Printing for Notebooks allows easy printing access to these newly encountered printers. There is no need to locate the printer driver or create a new network port. The user simply selects the HP Mobile Printing application, enters the network address (IP Address, hostname, or UNC pathname) of the target printer when prompted, and the print job is sent to the printer.

A Web JetAdmin plug-in has been developed to allow IT administrators to remotely enable display of the printer IP address on the printer control panel display. To download this plug-in, please visit the HP web jetadmin software and components download site.

If the printer IP address is not displayed, you may determine the IP address by printing a Configuration Page from the printer control panel menu.

Download and Installation

Note: Before proceeding with the software installation, be aware that administrator privileges are required to install the software and configure the printing system.

Close any screen savers, virus protection programs, or other software programs running on your computer.
Click on Download Now and a File Download box will appear.
Select Save This Program to Disk and a Save As box will appear.
Select a directory to save the file in and click Save.
Locate the file using Windows Explorer when the download has completed.
Double click on the file. This will begin the installation process. During the install, you may choose to make the HP Mobile Printing the default system printer on your computer.
When the installation is complete, a new system printer named HP Mobile Printing will be located in the Printers folder on your computer.
Compañía
Hewlett Packard
Dispositivo
Impresoras y Plotters
Modelo
Hewlett Packard HP Color LaserJet 2550Ln
Descripción
PostScript Driver
Sistema Operativo
Windows NT4
Idioma
Chinese Simplified
Versión Driver
034.4100
Tamaño
1Mb
Nombre del archivo
clj2550pswinnt4-sc.exe
Información
This section will help you in the download of the software to your computer and start you on the install process.
Before proceeding with the software installation, the printer must first be properly set up, and your computer must be ready to print.
Turn on the printer first, then turn on the computer.
Close any screen savers, virus protection programs, or other software programs running on your computer.
Click on Download Now and a File Download box will appear.
Select Save This Program to Disk and a Save As box will appear.
Select a directory to save the file in and click Save.
Locate the file using Windows Explorer when the download has completed.
Double click on the file. This will extract all the driver files into a directory on your hard drive. The directory these files are extracted to will have a similar name to the file that was downloaded (i.e., c:\clj2550ps). However, you can change the path and directory name at the time of extracting the file.
Open the Printers Window (Click Start-Settings-Printers).
Update the printer if it was previously installed
Right click on the printer and select Properties from the pop menu.
On the General tab, select New Driver.
Click on the Warning Box that pops up.
A printer listing box will appear. Select Have Disk.
Another box Install from Disk appears.
Click the Browse to locate the expanded files directory (i.e., c:\clj2550ps).
Click on the file ending with .inf .
Click Open and then OK and let files install.
Add the printer if it hasn't been installed yet.
Click Add New Printer
Follow the instructions of the Add Printer Wizard.
Compañía
Hewlett Packard
Dispositivo
Impresoras y Plotters
Modelo
Hewlett Packard HP Color LaserJet 2550Ln
Descripción
PCL6 Driver
Sistema Operativo
Windows NT4
Idioma
Chinese Simplified
Versión Driver
4.24.2550.400
Tamaño
2.9Mb
Nombre del archivo
clj2550pcl6winnt4-sc.exe
Información
This section will help you in the download of the software to your computer and start you on the install process.
Before proceeding with the software installation, the printer must first be properly set up, and your computer must be ready to print.
Turn on the printer first, then turn on the computer.
Close any screen savers, virus protection programs, or other software programs running on your computer.
Click on Download Now and a File Download box will appear.
Select Save This Program to Disk and a Save As box will appear.
Select a directory to save the file in and click Save.
Locate the file using Windows Explorer when the download has completed.
Double click on the file. This will extract all the driver files into a directory on your hard drive. The directory these files are extracted to will have a similar name to the file that was downloaded (i.e., c:\clj2550pcl6). However, you can change the path and directory name at the time of extracting the file.
Open the Printers Window (Click Start-Settings-Printers).
Update the printer if it was previously installed
Right click on the printer and select Properties from the pop menu.
On the General tab, select New Driver.
Click on the Warning Box that pops up.
A printer listing box will appear. Select Have Disk.
Another box Install from Disk appears.
Click the Browse to locate the expanded files directory (i.e., c:\clj2550pcl6).
Click on the file ending with .inf .
Click Open and then OK and let files install.
Add the printer if it hasn't been installed yet.
Click Add New Printer
Follow the instructions of the Add Printer Wizard.
Compañía
Hewlett Packard
Dispositivo
Impresoras y Plotters
Modelo
Hewlett Packard HP Color LaserJet 2550Ln
Descripción
Printing software and utility
Sistema Operativo
Mac OS 9
Idioma
Chinese Traditional
Versión Utilities
4.1
Tamaño
4Mb
Nombre del archivo
clj2550mac9_x-tc.sit
Información
The HP LaserJet Installer provides HP LaserJet PostScript printing support for the Mac 9.1 and 9.2 operating systems.
Compañía
Hewlett Packard
Dispositivo
Impresoras y Plotters
Modelo
Hewlett Packard HP Color LaserJet 2550Ln
Descripción
Installer
Sistema Operativo
Mac OS 9
Idioma
Chinese Traditional
Versión Driver
4.1
Tamaño
4Mb
Nombre del archivo
clj2550installer-tc.sit
Información
HP Color LaserJet 2550 Installer for Mac OS 9.

Compañía
Hewlett Packard
Dispositivo
Impresoras y Plotters
Modelo
Hewlett Packard HP Color LaserJet 2550Ln
Descripción
Firmware Update utility
Sistema Operativo
Mac OS X
Idioma
Chinese Traditional
Versión Firmware
20040930
Tamaño
5.6Mb
Nombre del archivo
2550_fw_update20040930.dmg
Fecha
28 Jul 2005
Información
WARNING: Determine what the current firmware version of your printer is before downloading the update. If your printer already has the current version (20040930), downloading this file might cause possible performance issues. To determine the version of firmware of your HP Color LaserJet 2550 printer, print a Configuration Page by pressing the Go button (green) and the Cancel button (Red) on the printer's control panel. The firmware version is listed on the top left part of the page, under Product Information - Firmware Datecode.

Firmware Enhancements

These changes are implemented in the new version firmware 20040930:
Default screenmatch color treatment for non-driver PostScript jobs.
Enabled to set FONTSOURCE to a downloaded soft font via PJL.
Cyrillic/Greek/Hebrew font settings now available
Improved memory allocation for complex pages.
The default I/O timeout changed to 120 seconds.
Printing from Mac systems, and printing PDF files, will have an improved CMYK color adjustment.
Calibration will now occur on non-HP refilled cartridge that have the e-label set to "toner out".
Unexpected Paper Size messages are now bypassed by pressing Go or Cancel from the Toolbox utility.
The Supplies Status page will now include the part number for HP cartridges when recognizing a non-HP cartridge installed.
Monochrome print speed will increase by choosing "Print to Grayscale" in the driver's Color tab.

Note: This utility is in English only.

* You will need 20MB of disk space to use the Firmware Update Utility.

* The HP Color LaserJet 2550 series printer must be in a READY state and remain powered on during the entire firmware update process.

* The control panel of the printer will display a series of flashing lights.

* After the Firmware Update Utility has finished, the HP Color LaserJet 2550 series printer will display a solid green Ready light (second from the bottom). You may be prompted to reboot your computer.


Installation Instructions

(NOTE! If you use Internet Explorer to download the utility, it may strip the .dmg extension to the file. Simply re-add the .dmg extension and MAC OS X should recognize the file as a disk image)

This utility is for use on any OS X 10.2 or 10.3 Mac. It will NOT function in the MAC OS 9 environment.

It can only be used with a USB connection to the HP Color LaserJet 2550.

Instructions for upgrade

* For users connected via the network, please temporarily disconnect your HP Color LaserJet 2550 series printer from the network to ensure the network devices to not interrupt the FW upgrade process.
Mount the disk image containing the FW update.
Run the FW Update Application contained in the disk image.
Follow the onscreen prompts to continue.
When prompted, connect the printer via USB.
Upon finding an HP Color LaserJet 2550 series printer, the utility will prompt you to reboot the printer by simply turn the power off and back on. This ensures the printer is in a proper state to receive the update.
Once the printer has been rebooted, the utility will allow you to 'download' the firmware to the HP Color LaserJet 2550 series printer.
DO NOT POWER CYCLE THE PRINTER during the upgrade process or it will leave your printer in an unusable state.
One green LED will start flashing initially followed by 2 LED's flashing.
Once the LEDS stop flashing, the printer has updated and re-initialized, the firmware should be updated.
The firmware update can take up to 5 minutes to complete. Please be patient.
Compañía
Hewlett Packard
Dispositivo
Impresoras y Plotters
Modelo
Hewlett Packard HP Color LaserJet 2550Ln
Descripción
Installer Print Only Software Solution for v10.2 v10.3.x v10.4.x v10.5
Sistema Operativo
Mac OS X
Idioma
Chinese Traditional
Versión Driver
7.8.0.761
Tamaño
29.1Mb
Nombre del archivo
hp_laserjet_and_edgeline_print-only.dmg
Fecha
28 Jan 2008
Información
This download package contains HP LaserJet Mac OS X Installer Print Only Software Solution v7.8.0.761. Included are the HP Postscript PPD and PDE files for Mac OS X v10.2, v10.3.x, v10.4.x, v10.5 - PPC and Intel processor.
Supported Devices
HP color LaserJet 2500
HP color LaserJet 2550 series
HP color LaserJet 3700
HP color LaserJet 4600
HP color LaserJet 4650
HP color LaserJet 5500
HP Color LaserJet 5550
HP Color LaserJet 8500
HP Color LaserJet 8550
HP color LaserJet 9500
HP color LaserJet 9500 MFP
HP Color LaserJet
HP Color LaserJet 5/5M
HP Color LaserJet 4500
HP Color LaserJet 4550
HP LaserJet 1200
HP LaserJet 1300
HP LaserJet 1300n
HP LaserJet 1320 series
HP LaserJet 2100 Series
HP LaserJet 2200
HP LaserJet 4000 Series
HP LaserJet 4050 Series
HP LaserJet 4100 MFP
HP LaserJet 4100 Series
HP LaserJet 4200
HP LaserJet 4200L
HP LaserJet 4240
HP LaserJet 4240N
HP LaserJet 4250
HP LaserJet 4250L
HP LaserJet 4300
HP LaserJet 4350
HP LaserJet 4350L
HP LaserJet 4V
HP LaserJet 5000 Series
HP LaserJet 5100 Series
HP LaserJet 8000 Series
HP LaserJet 8100 Series
HP LaserJet 8150 Series
HP LaserJet 9000 MFP
HP LaserJet 9000L MFP
HP LaserJet 9000 Series
HP LaserJet 9040
HP LaserJet 9040 MFP
HP LaserJet 9050 MFP
HP LaserJet 9050
HP LaserJet 9055 mfp
HP LaserJet 9065 mfp
HP LaserJet 4 Plus
HP LaserJet 4ML
HP LaserJet 4MP
HP LaserJet 4Si
HP LaserJet 5M
HP LaserJet 5P
HP LaserJet 5Si
HP LaserJet 5Si Mopier
HP LaserJet 6P
HP Mopier 240
HP Mopier 320
HP LaserJet 1220
HP LaserJet 3015
HP LaserJet 3020
HP LaserJet 3030
HP LaserJet 3200
HP LaserJet 3300/3310/3320
HP LaserJet 3300
HP LaserJet 3380
HP business inkjet 2300
HP Business Inkjet 2600
HP Business Inkjet 2800
HP Business Inkjet 3000
HP officejet 9100 series
HP Business Inkjet 2250
HP Business Inkjet 2280
Compañía
Hewlett Packard
Dispositivo
Impresoras y Plotters
Modelo
Hewlett Packard HP Color LaserJet 2550Ln
Descripción
PostScript Driver
Sistema Operativo
Windows 2000-2003-XP
Idioma
Chinese Traditional
Versión Driver
60.34.78.41
Tamaño
5.3Mb
Nombre del archivo
clj2550pswin2kxp2003-tc.exe
Información
Enhancements

Incorporated JPEG compression to reduce spool file size.
Resolves spoolsv.exe crash when printing some PowerPoint documents.
Control Panel simulator in the Services tab is now functional.

This section will help you in the download of the software to your computer and start you on the install process.
Before proceeding with the software installation, the printer must first be properly set up, and your computer must be ready to print.

DOWNLOAD AND EXTRACT THE SOFTWARE

Close any screen savers, virus protection programs, or other software programs running on your computer.
Click on Download Now and a File Download box will appear.
Select Save This Program to Disk and a Save As box will appear.
Select a directory to save the file in and click Save.
Locate the file using Windows Explorer when the download has completed.
Double click on the file. This will extract all the driver files into a directory on your hard drive. The directory these files are extracted to will have a similar name to the file that was downloaded (i.e., c:\clj2550ps). However, you can change the path and directory name at the time of extracting the file.
PLEASE USE THESE STEPS IF YOU ARE UPDATING THE HP COLOR LASERJET 2550 DRIVER
From the Windows XP desktop, click Start, and then Printers and Faxes (for Windows 2000, click Start, Settings and then Printers).
Right click on the hp color LaserJet 2550 PostScript icon or listing, and then click Properties.
Click the Advanced tab.
Make certain the Driver box displays hp color LaserJet 2550 PostScript, and then click New Driver.
In the Add Printer Driver Wizard window, click Have Disk, and then Browse.
Browse to the directory that the downloaded files where unzipped to.

NOTE: The default directory would be c:\clj2550pswin2kxp2003-xx (xx represents language, such as en for English)

The Look in box will display clj2550pswin2kxp2003-xx (xx represents language, such as en for English). Do not open any folders in this directory. The autorun.ini file should be in the File name box. Click Open.
On the Install From Disk window, click OK. The print driver name, hp color LaserJet 2550 PostScript, should be displayed. Click Next to continue.
When the update is finished, click OK to close the hp color LaserJet 2550 PostScript Properties window. The update is now complete.
PLEASE USE THESE STEPS IF THIS IS A FIRST TIME INSTALLATION OF THE HP COLOR LASERJET 2550 DRIVER:
Attach a USB or parallel cable to the printer and the computer.
The "Found New Hardware Wizard" should appear. Note: If attaching via a parallel cable it may be necessary to restart the computer for the "Found New Hardware Wizard" to appear.
For Windows XP
Choose "Install from a list or specific location (advanced)" and then click Next.
Select only the box next to "Include this location in the search" (clear all other check boxes) then click the browse button to locate the directory where the driver was extracted to in the steps above. The directory these files are extracted to will have a similar name to the file that was downloaded (i.e., c:\clj2550ps).
Click once on the directory name to highlight it then choose OK. The directory path then appears in the dialog.
Select the Next button. Files will be copied to the appropriate directories automatically.
Click the Finish button within the "New Hardware Wizard"
After several moments and message will appear on the system tray (at the bottom right of the screen near the clock) indicating that "Your new hardware has been installed and is ready to use.

For Windows 2000
Click the Next button to continue.
Choose "Search for a suitable driver form my device (recommended)" and then click Next.
Select only the box next to "Specify a location" (clear all other check boxes) and click Next.
Click the browse button to locate the directory where the driver was extracted to in the steps above. The directory these files are extracted to will have a similar name to the file that was downloaded (i.e., c:\clj2550ps).
Click once on the directory name to highlight it and then select the Open button.
Autorun.inf should appear in the "file name" box. Click the Open button.
Select OK. The wizard will find the driver for the device.
Click the Next button.
Click Finish. Several dialogs will appear and then disappear.
The printer driver is now installed.
Compañía
Hewlett Packard
Dispositivo
Impresoras y Plotters
Modelo
Hewlett Packard HP Color LaserJet 2550Ln
Descripción
PCL6 Driver
Sistema Operativo
Windows 2000-2003-XP
Idioma
Chinese Traditional
Versión Driver
60.34.78.41
Tamaño
5.5Mb
Nombre del archivo
clj2550pcl6win2kxp2003-zhtw.exe
Información
Enhancements

Incorporated JPEG compression to reduce spool file size.
Resolves spoolsv.exe crash when printing some PowerPoint documents.
Control Panel simulator in the Services tab is now functional.

This section will help you in the download of the software to your computer and start you on the install process.
Before proceeding with the software installation, the printer must first be properly set up, and your computer must be ready to print.

DOWNLOAD AND EXTRACT THE SOFTWARE

Close any screen savers, virus protection programs, or other software programs running on your computer.
Click on Download Now and a File Download box will appear.
Select Save This Program to Disk and a Save As box will appear.
Select a directory to save the file in and click Save.
Locate the file using Windows Explorer when the download has completed.
Double click on the file. This will extract all the driver files into a directory on your hard drive. The directory these files are extracted to will have a similar name to the file that was downloaded (i.e., c:\clj2550pcl6). However, you can change the path and directory name at the time of extracting the file.
PLEASE USE THESE STEPS IF YOU ARE UPDATING THE HP COLOR LASERJET 2550 DRIVER
From the Windows XP desktop, click Start, and then Printers and Faxes (for Windows 2000, click Start, Settings and then Printers).
Right click on the hp color LaserJet 2550 PCL6 icon or listing, and then click Properties.
Click the Advanced tab.
Make certain the Driver box displays hp color LaserJet 2550 PCL6, and then click New Driver.
In the Add Printer Driver Wizard window, click Have Disk, and then Browse.
Browse to the directory that the downloaded files where unzipped to.

NOTE: The default directory would be C:\clj2550pcl6 (xx represents language, such as en for English)

The Look in box will display clj2550pcl6win2kxp2003-xx (xx represents language, such as en for English). Do not open any folders in this directory. The autorun.ini file should be in the File name box. Click Open.
On the Install From Disk window, click OK. The print driver name, hp color LaserJet 2550 PCL6, should be displayed. Click Next to continue.
When the update is finished, click OK to close the hp color LaserJet 2550 PCL6 Properties window. The update is now complete.
PLEASE USE THESE STEPS IF THIS IS A FIRST TIME INSTALLATION OF THE HP COLOR LASERJET 2550 DRIVER:
Attach a USB or parallel cable to the printer and the computer.
The "Found New Hardware Wizard" should appear. Note: If attaching via a parallel cable it may be necessary to restart the computer for the "Found New Hardware Wizard" to appear.
For Windows XP
Choose "Install from a list or specific location (advanced)" and then click Next.
Select only the box next to "Include this location in the search" (clear all other check boxes) then click the browse button to locate the directory where the driver was extracted to in the steps above. The directory these files are extracted to will have a similar name to the file that was downloaded (i.e., c:\clj2550pcl6).
Click once on the directory name to highlight it then choose OK. The directory path then appears in the dialog.
Select the Next button. Files will be copied to the appropriate directories automatically.
Click the Finish button within the "New Hardware Wizard"
After several moments and message will appear on the system tray (at the bottom right of the screen near the clock) indicating that "Your new hardware has been installed and is ready to use.

For Windows 2000
Click the Next button to continue.
Choose "Search for a suitable driver form my device (recommended)" and then click Next.
Select only the box next to "Specify a location" (clear all other check boxes) and click Next.
Click the browse button to locate the directory where the driver was extracted to in the steps above. The directory these files are extracted to will have a similar name to the file that was downloaded (i.e., c:\clj2550pcl6).
Click once on the directory name to highlight it and then select the Open button.
Autorun.inf should appear in the "file name" box. Click the Open button.
Select OK. The wizard will find the driver for the device.
Click the Next button.
Click Finish. Several dialogs will appear and then disappear.
The printer driver is now installed.
Compañía
Hewlett Packard
Dispositivo
Impresoras y Plotters
Modelo
Hewlett Packard HP Color LaserJet 2550Ln
Descripción
PCL6 Driver
Sistema Operativo
Windows 2000-2003-XP-Vista
Idioma
Chinese Traditional
Versión Driver
4.5
Tamaño
18Mb
Nombre del archivo
hpupd45pcl632.exe
Fecha
1 Apr 2008
Información
The UPD version 4.5 is the latest version of HP's Universal Print Driver. Please review the entire documentation for information on issues resolved, performance improvements, and new behavior changes to the UPD.
Compañía
Hewlett Packard
Dispositivo
Impresoras y Plotters
Modelo
Hewlett Packard HP Color LaserJet 2550Ln
Descripción
Universal Print Driver PCL 5
Sistema Operativo
Windows 2000-2003-XP-Vista
Idioma
Chinese Traditional
Versión Driver
4.5
Tamaño
17.8Mb
Nombre del archivo
hpupd45pcl532.exe
Fecha
1 Apr 2008
Información
The UPD version 4.5 is the latest version of HP's Universal Print Driver. Please review the entire documentation for information on issues resolved, performance improvements, and new behavior changes to the UPD.
Compañía
Hewlett Packard
Dispositivo
Impresoras y Plotters
Modelo
Hewlett Packard HP Color LaserJet 2550Ln
Descripción
Universal Print Driver PostScript
Sistema Operativo
Windows 2000-2003-XP-Vista
Idioma
Chinese Traditional
Versión Driver
4.5
Tamaño
18.6Mb
Nombre del archivo
hpupd45ps32.exe
Fecha
1 Apr 2008
Información
The UPD version 4.5 is the latest version of HP's Universal Print Driver. Please review the entire documentation for information on issues resolved, performance improvements, and new behavior changes to the UPD.
Compañía
Hewlett Packard
Dispositivo
Impresoras y Plotters
Modelo
Hewlett Packard HP Color LaserJet 2550Ln
Descripción
PCL6 Driver
Sistema Operativo
Windows 2003 64 bits-XP 64 bits-Vista 64 bits
Idioma
Chinese Traditional
Versión Driver
4.5
Tamaño
18.2Mb
Nombre del archivo
hpupd45pcl664.exe
Fecha
1 Apr 2008
Información
The UPD version 4.5 is the latest version of HP's Universal Print Driver. Please review the entire documentation for information on issues resolved, performance improvements, and new behavior changes to the UPD.
Compañía
Hewlett Packard
Dispositivo
Impresoras y Plotters
Modelo
Hewlett Packard HP Color LaserJet 2550Ln
Descripción
Universal Print Driver x64 PostScript
Sistema Operativo
Windows 2003 64 bits-XP 64 bits-Vista 64 bits
Idioma
Chinese Traditional
Versión Driver
4.5
Tamaño
19Mb
Nombre del archivo
hpupd45ps64.exe
Fecha
1 Apr 2008
Información
The UPD version 4.5 is the latest version of HP's Universal Print Driver. Please review the entire documentation for information on issues resolved, performance improvements, and new behavior changes to the UPD.
Compañía
Hewlett Packard
Dispositivo
Impresoras y Plotters
Modelo
Hewlett Packard HP Color LaserJet 2550Ln
Descripción
PCL5 Driver
Sistema Operativo
Windows 2003 64 bits-XP 64 bits-Vista 64 bits
Idioma
Chinese Traditional
Versión Driver
4.5
Tamaño
18.2Mb
Nombre del archivo
hpupd45pcl564.exe
Fecha
1 Apr 2008
Información
The UPD version 4.5 is the latest version of HP's Universal Print Driver. Please review the entire documentation for information on issues resolved, performance improvements, and new behavior changes to the UPD.
Compañía
Hewlett Packard
Dispositivo
Impresoras y Plotters
Modelo
Hewlett Packard HP Color LaserJet 2550Ln
Descripción
PCL6 Plug and Play Bundle
Sistema Operativo
Windows 98-Me-2000-2003-XP
Idioma
Chinese Traditional
Versión Driver
2.0
Tamaño
11.6Mb
Nombre del archivo
clj2550pcl6-tc.exe
Información
Use this software for first time USB installations only. Do NOT attach USB cable until prompted by the installation program

If upgrading a previous installation please use the "HP Color LaserJet 2550 PCL6 driver" download and view the description which includes instructions for updating the driver.

HP Color LaserJet 2550 PCL6 Plug and Play Bundle provides the following:

An installation program to assist with installation.
The print drivers are the same as those found on the version 2.0 CD.
Windows 98/ME: 4.24.2550.400
Windows 2000/XP/2003: 60.034.78.41
Plug and Play installable drivers for 1284.4 communication with the device.
Plug and Play installable PCL6 printer driver.
The product CD can be used at a later time to install additional product software, such as Toolbox.
A silent install is provided by running the program from a DOS prompt with the following command line parameters:
lj2550pcl6-en.exe -s -a -silent

This section will help you in the download of the software to your computer and start you on the install process.
Before proceeding with the software installation, the printer must first be properly set up, and your computer must be ready to print.
Close any screen savers, virus protection programs, or other software programs running on your computer.
Click on Download Now and a File Download box will appear.
Select Save This Program to Disk and a Save As box will appear.
Select a directory to save the file in and click Save.
Locate the file using Windows Explorer when the download has completed.
Double click on the file. This will extract all the driver files into a directory on your hard drive. The default directory is Program Files\Hewlett-Packard\Color LaserJet 2550 Drivers. However, you can change the path and directory name at the time of extracting the file.
Follow the instructions presented by the installation program. Do NOT attach the USB cable to the printer until prompted by the installation program.
Compañía
Hewlett Packard
Dispositivo
Impresoras y Plotters
Modelo
Hewlett Packard HP Color LaserJet 2550Ln
Descripción
Firmware Update utility
Sistema Operativo
Windows 98-Me-2000-XP
Idioma
Chinese Traditional
Versión Firmware
20040930
Tamaño
6.2Mb
Nombre del archivo
flash_5f2550_20040930_rev2.exe
Fecha
11 Oct 2004
Información
WARNING: Determine what the current firmware version of your printer is before downloading the update. If your printer already has the current version (20040930), downloading this file might cause possible performance issues. To determine the version of firmware of your HP Color LaserJet 2550 printer, print a Configuration Page by pressing the Go button (green) and the Cancel button (Red) on the printer's control panel. The firmware version is listed on the top left part of the page, under Product Information - Firmware Datecode.
Firmware Enhancements

These changes are implemented in the new version firmware 20040930:
Default screenmatch color treatment for non-driver PostScript jobs.
Enabled to set FONTSOURCE to a downloaded soft font via PJL.
Cyrillic/Greek/Hebrew font settings now available
Improved memory allocation for complex pages.
The default I/O timeout changed to 120 seconds.
Printing from Mac systems, and printing PDF files, will have an improved CMYK color adjustment.
Calibration will now occur on non-HP refilled cartridge that have the e-label set to "toner out".
Unexpected Paper Size messages are now bypassed by pressing Go or Cancel from the Toolbox utility.
The Supplies Status page will now include the part number for HP cartridges when recognizing a non-HP cartridge installed.
Monochrome print speed will increase by choosing "Print to Grayscale" in the driver's Color tab

Note: This utility is in English only.

* The HP Color LaserJet 2550 series Firmware Update Utility can be performed using either a Parallel or USB port.
When using the USB port, the HP Color LaserJet 2550 series software must be installed prior to using this utility.
When using the parallel port, the HP Color LaserJet 2550 series software does not need to be installed. Connect the 2550 series printer to a PC with the Firmware Update Utility loaded using a parallel cable.
* You will need 20MB of disk space to use the Firmware Update Utility.

* The HP Color LaserJet 2550 series printer must be in a READY state and remain powered on during the entire firmware update process.

* Administrator Privileges are required on the PC executing the utility.

* The control panel of the printer will display a series of flashing lights.

* After the Firmware Update Utility has finished, the HP Color LaserJet 2550 series printer will display a solid green Ready light (second from the bottom). Depending on the operating system on your PC, you may be prompted to reboot your computer.

This utility is for use on Windows 95, 98, ME, 2000 and XP. It can ONLY be used with parallel or USB connections.


Installation Instructions

* For users connected via the network, please temporarily disconnect your HP Color LaserJet 2550 series printer from the network to ensure the network devices to not interrupt the firmware upgrade process.

Parallel Cable connection
Connect a PC to the HP Color LaserJet 2550 series printer via a parallel cable.
You do not need to install the HP software for parallel upgrades.
If the "Add Hardware" wizard starts when you plug in the parallel cable, you can safely cancel it.
Double click the Flash Update utility.
Click 'OK' to begin the process. The utility will go through the following steps:
Close all toolbox and HP software running on the host PC.
Upload firmware to printer, at which point the printer lights will start flashing until complete.
Printer will then erase the old firmware and write the new firmware and reboot it.
Utility will prompt user to reboot PC (to synchronize the printer, restart Toolbox and the HP software)
DO NOT POWER CYCLE THE PRINTER during the upgrade process or it will leave your printer in an unusable state.
Once the utility is complete, it will prompt you to reboot your PC and printer to synchronize the printer and the HP Toolbox.
The firmware update can take up to 5 minutes to complete. Please be patient.
USB Connection
In order to use USB to update your printer, you must have the HP Color LaserJet 2550 series printer software installed on your PC.
You do NOT need to have toolbox installed. A driver only installation will work fine.
Ensure your HP Color LaserJet 2550 series printer is connected to the USB cable.
Double click the Flash Update utility.
Click 'OK' to begin the process. The utility will go through the following steps:
Close all Toolbox and HP software running on host PC.
Upload firmware to printer, at which point the printer lights will flash until complete.
Printer will then erase the old firmware and write the new firmware and reboot itself.
Utility will prompt user to reboot PC (to resync printer, restart toolbox and HP software)
DO NOT POWER CYCLE THE PRINTER during the upgrade process or it will leave your printer in an unusable state.
Once the utility is complete, it will prompt you to reboot your PC and printer to resync the printer and the HP Toolbox.
The firmware update can take up to 5 minutes to complete. Please be patient.
Compañía
Hewlett Packard
Dispositivo
Impresoras y Plotters
Modelo
Hewlett Packard HP Color LaserJet 2550Ln
Descripción
Mobile Printing for Notebooks
Sistema Operativo
Windows NT4
Idioma
Chinese Traditional
Versión Driver
2.10
Tamaño
3.5Mb
Nombre del archivo
mobileprinting4notebooksnt4-tc.exe
Información
HP Mobile Printing for Notebooks (formally known as HP Mobile Printing Driver) is a software solution designed to facilitate printing from mobile notebook computers to network-connected Postscript-enabled HP printers.

As the notebook user moves around within the enterprise from floor to floor or from site to site, there is a need to print to networked printers that are encountered while away from the desk. HP Mobile Printing for Notebooks allows easy printing access to these newly encountered printers. There is no need to locate the printer driver or create a new network port. The user simply selects the HP Mobile Printing application, enters the network address (IP Address, hostname, or UNC pathname) of the target printer when prompted, and the print job is sent to the printer.

A Web JetAdmin plug-in has been developed to allow IT administrators to remotely enable display of the printer IP address on the printer control panel display. To download this plug-in, please visit the HP web jetadmin software and components download site.

If the printer IP address is not displayed, you may determine the IP address by printing a Configuration Page from the printer control panel menu.

Download and Installation

Note: Before proceeding with the software installation, be aware that administrator privileges are required to install the software and configure the printing system.

Close any screen savers, virus protection programs, or other software programs running on your computer.
Click on Download Now and a File Download box will appear.
Select Save This Program to Disk and a Save As box will appear.
Select a directory to save the file in and click Save.
Locate the file using Windows Explorer when the download has completed.
Double click on the file. This will begin the installation process. During the install, you may choose to make the HP Mobile Printing the default system printer on your computer.
When the installation is complete, a new system printer named HP Mobile Printing will be located in the Printers folder on your computer.
Compañía
Hewlett Packard
Dispositivo
Impresoras y Plotters
Modelo
Hewlett Packard HP Color LaserJet 2550Ln
Descripción
PCL6 Driver
Sistema Operativo
Windows NT4
Idioma
Chinese Traditional
Versión Driver
4.24.2550.400
Tamaño
2.9Mb
Nombre del archivo
clj2550pcl6winnt4-tc.exe
Información
This section will help you in the download of the software to your computer and start you on the install process.
Before proceeding with the software installation, the printer must first be properly set up, and your computer must be ready to print.
Turn on the printer first, then turn on the computer.
Close any screen savers, virus protection programs, or other software programs running on your computer.
Click on Download Now and a File Download box will appear.
Select Save This Program to Disk and a Save As box will appear.
Select a directory to save the file in and click Save.
Locate the file using Windows Explorer when the download has completed.
Double click on the file. This will extract all the driver files into a directory on your hard drive. The directory these files are extracted to will have a similar name to the file that was downloaded (i.e., c:\clj2550pcl6). However, you can change the path and directory name at the time of extracting the file.
Open the Printers Window (Click Start-Settings-Printers).
Update the printer if it was previously installed
Right click on the printer and select Properties from the pop menu.
On the General tab, select New Driver.
Click on the Warning Box that pops up.
A printer listing box will appear. Select Have Disk.
Another box Install from Disk appears.
Click the Browse to locate the expanded files directory (i.e., c:\clj2550pcl6).
Click on the file ending with .inf .
Click Open and then OK and let files install.
Add the printer if it hasn't been installed yet.
Click Add New Printer
Follow the instructions of the Add Printer Wizard.
Compañía
Hewlett Packard
Dispositivo
Impresoras y Plotters
Modelo
Hewlett Packard HP Color LaserJet 2550Ln
Descripción
PostScript Driver
Sistema Operativo
Windows NT4
Idioma
Chinese Traditional
Versión Driver
034.4100
Tamaño
1Mb
Nombre del archivo
clj2550pswinnt4-tc.exe
Información
This section will help you in the download of the software to your computer and start you on the install process.
Before proceeding with the software installation, the printer must first be properly set up, and your computer must be ready to print.
Turn on the printer first, then turn on the computer.
Close any screen savers, virus protection programs, or other software programs running on your computer.
Click on Download Now and a File Download box will appear.
Select Save This Program to Disk and a Save As box will appear.
Select a directory to save the file in and click Save.
Locate the file using Windows Explorer when the download has completed.
Double click on the file. This will extract all the driver files into a directory on your hard drive. The directory these files are extracted to will have a similar name to the file that was downloaded (i.e., c:\clj2550ps). However, you can change the path and directory name at the time of extracting the file.
Open the Printers Window (Click Start-Settings-Printers).
Update the printer if it was previously installed
Right click on the printer and select Properties from the pop menu.
On the General tab, select New Driver.
Click on the Warning Box that pops up.
A printer listing box will appear. Select Have Disk.
Another box Install from Disk appears.
Click the Browse to locate the expanded files directory (i.e., c:\clj2550ps).
Click on the file ending with .inf .
Click Open and then OK and let files install.
Add the printer if it hasn't been installed yet.
Click Add New Printer
Follow the instructions of the Add Printer Wizard.
Compañía
Hewlett Packard
Dispositivo
Impresoras y Plotters
Modelo
Hewlett Packard HP Color LaserJet 2550Ln
Descripción
Firmware Update utility
Sistema Operativo
Mac OS X
Idioma
Czech
Versión Firmware
20040930
Tamaño
5.6Mb
Nombre del archivo
2550_fw_update20040930.dmg
Fecha
28 Jul 2005
Información
WARNING: Determine what the current firmware version of your printer is before downloading the update. If your printer already has the current version (20040930), downloading this file might cause possible performance issues. To determine the version of firmware of your HP Color LaserJet 2550 printer, print a Configuration Page by pressing the Go button (green) and the Cancel button (Red) on the printer's control panel. The firmware version is listed on the top left part of the page, under Product Information - Firmware Datecode.

Firmware Enhancements

These changes are implemented in the new version firmware 20040930:
Default screenmatch color treatment for non-driver PostScript jobs.
Enabled to set FONTSOURCE to a downloaded soft font via PJL.
Cyrillic/Greek/Hebrew font settings now available
Improved memory allocation for complex pages.
The default I/O timeout changed to 120 seconds.
Printing from Mac systems, and printing PDF files, will have an improved CMYK color adjustment.
Calibration will now occur on non-HP refilled cartridge that have the e-label set to "toner out".
Unexpected Paper Size messages are now bypassed by pressing Go or Cancel from the Toolbox utility.
The Supplies Status page will now include the part number for HP cartridges when recognizing a non-HP cartridge installed.
Monochrome print speed will increase by choosing "Print to Grayscale" in the driver's Color tab.

Note: This utility is in English only.

* You will need 20MB of disk space to use the Firmware Update Utility.

* The HP Color LaserJet 2550 series printer must be in a READY state and remain powered on during the entire firmware update process.

* The control panel of the printer will display a series of flashing lights.

* After the Firmware Update Utility has finished, the HP Color LaserJet 2550 series printer will display a solid green Ready light (second from the bottom). You may be prompted to reboot your computer.


Installation Instructions

(NOTE! If you use Internet Explorer to download the utility, it may strip the .dmg extension to the file. Simply re-add the .dmg extension and MAC OS X should recognize the file as a disk image)

This utility is for use on any OS X 10.2 or 10.3 Mac. It will NOT function in the MAC OS 9 environment.

It can only be used with a USB connection to the HP Color LaserJet 2550.

Instructions for upgrade

* For users connected via the network, please temporarily disconnect your HP Color LaserJet 2550 series printer from the network to ensure the network devices to not interrupt the FW upgrade process.
Mount the disk image containing the FW update.
Run the FW Update Application contained in the disk image.
Follow the onscreen prompts to continue.
When prompted, connect the printer via USB.
Upon finding an HP Color LaserJet 2550 series printer, the utility will prompt you to reboot the printer by simply turn the power off and back on. This ensures the printer is in a proper state to receive the update.
Once the printer has been rebooted, the utility will allow you to 'download' the firmware to the HP Color LaserJet 2550 series printer.
DO NOT POWER CYCLE THE PRINTER during the upgrade process or it will leave your printer in an unusable state.
One green LED will start flashing initially followed by 2 LED's flashing.
Once the LEDS stop flashing, the printer has updated and re-initialized, the firmware should be updated.
The firmware update can take up to 5 minutes to complete. Please be patient.
Compañía
Hewlett Packard
Dispositivo
Impresoras y Plotters
Modelo
Hewlett Packard HP Color LaserJet 2550Ln
Descripción
PCL6 Driver
Sistema Operativo
Windows 2000-2003-XP
Idioma
Czech
Versión Driver
60.34.78.41
Tamaño
5.5Mb
Nombre del archivo
clj2550pcl6win2kxp2003-cs.exe
Información
Enhancements

Incorporated JPEG compression to reduce spool file size.
Resolves spoolsv.exe crash when printing some PowerPoint documents.
Control Panel simulator in the Services tab is now functional.

This section will help you in the download of the software to your computer and start you on the install process.
Before proceeding with the software installation, the printer must first be properly set up, and your computer must be ready to print.

DOWNLOAD AND EXTRACT THE SOFTWARE

Close any screen savers, virus protection programs, or other software programs running on your computer.
Click on Download Now and a File Download box will appear.
Select Save This Program to Disk and a Save As box will appear.
Select a directory to save the file in and click Save.
Locate the file using Windows Explorer when the download has completed.
Double click on the file. This will extract all the driver files into a directory on your hard drive. The directory these files are extracted to will have a similar name to the file that was downloaded (i.e., c:\clj2550pcl6). However, you can change the path and directory name at the time of extracting the file.
PLEASE USE THESE STEPS IF YOU ARE UPDATING THE HP COLOR LASERJET 2550 DRIVER
From the Windows XP desktop, click Start, and then Printers and Faxes (for Windows 2000, click Start, Settings and then Printers).
Right click on the hp color LaserJet 2550 PCL6 icon or listing, and then click Properties.
Click the Advanced tab.
Make certain the Driver box displays hp color LaserJet 2550 PCL6, and then click New Driver.
In the Add Printer Driver Wizard window, click Have Disk, and then Browse.
Browse to the directory that the downloaded files where unzipped to.

NOTE: The default directory would be C:\clj2550pcl6 (xx represents language, such as en for English)

The Look in box will display clj2550pcl6win2kxp2003-xx (xx represents language, such as en for English). Do not open any folders in this directory. The autorun.ini file should be in the File name box. Click Open.
On the Install From Disk window, click OK. The print driver name, hp color LaserJet 2550 PCL6, should be displayed. Click Next to continue.
When the update is finished, click OK to close the hp color LaserJet 2550 PCL6 Properties window. The update is now complete.
PLEASE USE THESE STEPS IF THIS IS A FIRST TIME INSTALLATION OF THE HP COLOR LASERJET 2550 DRIVER:
Attach a USB or parallel cable to the printer and the computer.
The "Found New Hardware Wizard" should appear. Note: If attaching via a parallel cable it may be necessary to restart the computer for the "Found New Hardware Wizard" to appear.
For Windows XP
Choose "Install from a list or specific location (advanced)" and then click Next.
Select only the box next to "Include this location in the search" (clear all other check boxes) then click the browse button to locate the directory where the driver was extracted to in the steps above. The directory these files are extracted to will have a similar name to the file that was downloaded (i.e., c:\clj2550pcl6).
Click once on the directory name to highlight it then choose OK. The directory path then appears in the dialog.
Select the Next button. Files will be copied to the appropriate directories automatically.
Click the Finish button within the "New Hardware Wizard"
After several moments and message will appear on the system tray (at the bottom right of the screen near the clock) indicating that "Your new hardware has been installed and is ready to use.

For Windows 2000
Click the Next button to continue.
Choose "Search for a suitable driver form my device (recommended)" and then click Next.
Select only the box next to "Specify a location" (clear all other check boxes) and click Next.
Click the browse button to locate the directory where the driver was extracted to in the steps above. The directory these files are extracted to will have a similar name to the file that was downloaded (i.e., c:\clj2550pcl6).
Click once on the directory name to highlight it and then select the Open button.
Autorun.inf should appear in the "file name" box. Click the Open button.
Select OK. The wizard will find the driver for the device.
Click the Next button.
Click Finish. Several dialogs will appear and then disappear.
The printer driver is now installed.
Compañía
Hewlett Packard
Dispositivo
Impresoras y Plotters
Modelo
Hewlett Packard HP Color LaserJet 2550Ln
Descripción
PostScript Driver
Sistema Operativo
Windows 2000-2003-XP
Idioma
Czech
Versión Driver
60.34.78.41
Tamaño
5.3Mb
Nombre del archivo
clj2550pswin2kxp2003-cz.exe
Información
Enhancements

Incorporated JPEG compression to reduce spool file size.
Resolves spoolsv.exe crash when printing some PowerPoint documents.
Control Panel simulator in the Services tab is now functional.

This section will help you in the download of the software to your computer and start you on the install process.
Before proceeding with the software installation, the printer must first be properly set up, and your computer must be ready to print.

DOWNLOAD AND EXTRACT THE SOFTWARE

Close any screen savers, virus protection programs, or other software programs running on your computer.
Click on Download Now and a File Download box will appear.
Select Save This Program to Disk and a Save As box will appear.
Select a directory to save the file in and click Save.
Locate the file using Windows Explorer when the download has completed.
Double click on the file. This will extract all the driver files into a directory on your hard drive. The directory these files are extracted to will have a similar name to the file that was downloaded (i.e., c:\clj2550ps). However, you can change the path and directory name at the time of extracting the file.
PLEASE USE THESE STEPS IF YOU ARE UPDATING THE HP COLOR LASERJET 2550 DRIVER
From the Windows XP desktop, click Start, and then Printers and Faxes (for Windows 2000, click Start, Settings and then Printers).
Right click on the hp color LaserJet 2550 PostScript icon or listing, and then click Properties.
Click the Advanced tab.
Make certain the Driver box displays hp color LaserJet 2550 PostScript, and then click New Driver.
In the Add Printer Driver Wizard window, click Have Disk, and then Browse.
Browse to the directory that the downloaded files where unzipped to.

NOTE: The default directory would be c:\clj2550pswin2kxp2003-xx (xx represents language, such as en for English)

The Look in box will display clj2550pswin2kxp2003-xx (xx represents language, such as en for English). Do not open any folders in this directory. The autorun.ini file should be in the File name box. Click Open.
On the Install From Disk window, click OK. The print driver name, hp color LaserJet 2550 PostScript, should be displayed. Click Next to continue.
When the update is finished, click OK to close the hp color LaserJet 2550 PostScript Properties window. The update is now complete.
PLEASE USE THESE STEPS IF THIS IS A FIRST TIME INSTALLATION OF THE HP COLOR LASERJET 2550 DRIVER:
Attach a USB or parallel cable to the printer and the computer.
The "Found New Hardware Wizard" should appear. Note: If attaching via a parallel cable it may be necessary to restart the computer for the "Found New Hardware Wizard" to appear.
For Windows XP
Choose "Install from a list or specific location (advanced)" and then click Next.
Select only the box next to "Include this location in the search" (clear all other check boxes) then click the browse button to locate the directory where the driver was extracted to in the steps above. The directory these files are extracted to will have a similar name to the file that was downloaded (i.e., c:\clj2550ps).
Click once on the directory name to highlight it then choose OK. The directory path then appears in the dialog.
Select the Next button. Files will be copied to the appropriate directories automatically.
Click the Finish button within the "New Hardware Wizard"
After several moments and message will appear on the system tray (at the bottom right of the screen near the clock) indicating that "Your new hardware has been installed and is ready to use.

For Windows 2000
Click the Next button to continue.
Choose "Search for a suitable driver form my device (recommended)" and then click Next.
Select only the box next to "Specify a location" (clear all other check boxes) and click Next.
Click the browse button to locate the directory where the driver was extracted to in the steps above. The directory these files are extracted to will have a similar name to the file that was downloaded (i.e., c:\clj2550ps).
Click once on the directory name to highlight it and then select the Open button.
Autorun.inf should appear in the "file name" box. Click the Open button.
Select OK. The wizard will find the driver for the device.
Click the Next button.
Click Finish. Several dialogs will appear and then disappear.
The printer driver is now installed.
Compañía
Hewlett Packard
Dispositivo
Impresoras y Plotters
Modelo
Hewlett Packard HP Color LaserJet 2550Ln
Descripción
PCL6 Driver
Sistema Operativo
Windows 2000-2003-XP-Vista
Idioma
Czech
Versión Driver
4.5
Tamaño
18Mb
Nombre del archivo
hpupd45pcl632.exe
Fecha
1 Apr 2008
Información
The UPD version 4.5 is the latest version of HP's Universal Print Driver. Please review the entire documentation for information on issues resolved, performance improvements, and new behavior changes to the UPD.
Compañía
Hewlett Packard
Dispositivo
Impresoras y Plotters
Modelo
Hewlett Packard HP Color LaserJet 2550Ln
Descripción
Universal Print Driver PCL 5
Sistema Operativo
Windows 2000-2003-XP-Vista
Idioma
Czech
Versión Driver
4.5
Tamaño
17.8Mb
Nombre del archivo
hpupd45pcl532.exe
Fecha
1 Apr 2008
Información
The UPD version 4.5 is the latest version of HP's Universal Print Driver. Please review the entire documentation for information on issues resolved, performance improvements, and new behavior changes to the UPD.
Compañía
Hewlett Packard
Dispositivo
Impresoras y Plotters
Modelo
Hewlett Packard HP Color LaserJet 2550Ln
Descripción
Universal Print Driver PostScript
Sistema Operativo
Windows 2000-2003-XP-Vista
Idioma
Czech
Versión Driver
4.5
Tamaño
18.6Mb
Nombre del archivo
hpupd45ps32.exe
Fecha
1 Apr 2008
Información
The UPD version 4.5 is the latest version of HP's Universal Print Driver. Please review the entire documentation for information on issues resolved, performance improvements, and new behavior changes to the UPD.
Compañía
Hewlett Packard
Dispositivo
Impresoras y Plotters
Modelo
Hewlett Packard HP Color LaserJet 2550Ln
Descripción
PCL5 Driver
Sistema Operativo
Windows 2003 64 bits-XP 64 bits-Vista 64 bits
Idioma
Czech
Versión Driver
4.5
Tamaño
18.2Mb
Nombre del archivo
hpupd45pcl564.exe
Fecha
1 Apr 2008
Información
The UPD version 4.5 is the latest version of HP's Universal Print Driver. Please review the entire documentation for information on issues resolved, performance improvements, and new behavior changes to the UPD.
Compañía
Hewlett Packard
Dispositivo
Impresoras y Plotters
Modelo
Hewlett Packard HP Color LaserJet 2550Ln
Descripción
Universal Print Driver x64 PostScript
Sistema Operativo
Windows 2003 64 bits-XP 64 bits-Vista 64 bits
Idioma
Czech
Versión Driver
4.5
Tamaño
19Mb
Nombre del archivo
hpupd45ps64.exe
Fecha
1 Apr 2008
Información
The UPD version 4.5 is the latest version of HP's Universal Print Driver. Please review the entire documentation for information on issues resolved, performance improvements, and new behavior changes to the UPD.
Compañía
Hewlett Packard
Dispositivo
Impresoras y Plotters
Modelo
Hewlett Packard HP Color LaserJet 2550Ln
Descripción
PCL6 Driver
Sistema Operativo
Windows 2003 64 bits-XP 64 bits-Vista 64 bits
Idioma
Czech
Versión Driver
4.5
Tamaño
18.2Mb
Nombre del archivo
hpupd45pcl664.exe
Fecha
1 Apr 2008
Información
The UPD version 4.5 is the latest version of HP's Universal Print Driver. Please review the entire documentation for information on issues resolved, performance improvements, and new behavior changes to the UPD.
Compañía
Hewlett Packard
Dispositivo
Impresoras y Plotters
Modelo
Hewlett Packard HP Color LaserJet 2550Ln
Descripción
PCL6 Plug and Play Bundle
Sistema Operativo
Windows 98-Me-2000-2003-XP
Idioma
Czech
Versión Driver
2.0
Tamaño
11.7Mb
Nombre del archivo
clj2550pcl6-cz.exe
Información
Use this software for first time USB installations only. Do NOT attach USB cable until prompted by the installation program

If upgrading a previous installation please use the "HP Color LaserJet 2550 PCL6 driver" download and view the description which includes instructions for updating the driver.

HP Color LaserJet 2550 PCL6 Plug and Play Bundle provides the following:

An installation program to assist with installation.
The print drivers are the same as those found on the version 2.0 CD.
Windows 98/ME: 4.24.2550.400
Windows 2000/XP/2003: 60.034.78.41
Plug and Play installable drivers for 1284.4 communication with the device.
Plug and Play installable PCL6 printer driver.
The product CD can be used at a later time to install additional product software, such as Toolbox.
A silent install is provided by running the program from a DOS prompt with the following command line parameters:
lj2550pcl6-en.exe -s -a -silent

This section will help you in the download of the software to your computer and start you on the install process.
Before proceeding with the software installation, the printer must first be properly set up, and your computer must be ready to print.
Close any screen savers, virus protection programs, or other software programs running on your computer.
Click on Download Now and a File Download box will appear.
Select Save This Program to Disk and a Save As box will appear.
Select a directory to save the file in and click Save.
Locate the file using Windows Explorer when the download has completed.
Double click on the file. This will extract all the driver files into a directory on your hard drive. The default directory is Program Files\Hewlett-Packard\Color LaserJet 2550 Drivers. However, you can change the path and directory name at the time of extracting the file.
Follow the instructions presented by the installation program. Do NOT attach the USB cable to the printer until prompted by the installation program.
Compañía
Hewlett Packard
Dispositivo
Impresoras y Plotters
Modelo
Hewlett Packard HP Color LaserJet 2550Ln
Descripción
Firmware Update utility
Sistema Operativo
Windows 98-Me-2000-XP
Idioma
Czech
Versión Firmware
20040930
Tamaño
6.2Mb
Nombre del archivo
flash_5f2550_20040930_rev2.exe
Fecha
11 Oct 2004
Información
WARNING: Determine what the current firmware version of your printer is before downloading the update. If your printer already has the current version (20040930), downloading this file might cause possible performance issues. To determine the version of firmware of your HP Color LaserJet 2550 printer, print a Configuration Page by pressing the Go button (green) and the Cancel button (Red) on the printer's control panel. The firmware version is listed on the top left part of the page, under Product Information - Firmware Datecode.
Firmware Enhancements

These changes are implemented in the new version firmware 20040930:
Default screenmatch color treatment for non-driver PostScript jobs.
Enabled to set FONTSOURCE to a downloaded soft font via PJL.
Cyrillic/Greek/Hebrew font settings now available
Improved memory allocation for complex pages.
The default I/O timeout changed to 120 seconds.
Printing from Mac systems, and printing PDF files, will have an improved CMYK color adjustment.
Calibration will now occur on non-HP refilled cartridge that have the e-label set to "toner out".
Unexpected Paper Size messages are now bypassed by pressing Go or Cancel from the Toolbox utility.
The Supplies Status page will now include the part number for HP cartridges when recognizing a non-HP cartridge installed.
Monochrome print speed will increase by choosing "Print to Grayscale" in the driver's Color tab

Note: This utility is in English only.

* The HP Color LaserJet 2550 series Firmware Update Utility can be performed using either a Parallel or USB port.
When using the USB port, the HP Color LaserJet 2550 series software must be installed prior to using this utility.
When using the parallel port, the HP Color LaserJet 2550 series software does not need to be installed. Connect the 2550 series printer to a PC with the Firmware Update Utility loaded using a parallel cable.
* You will need 20MB of disk space to use the Firmware Update Utility.

* The HP Color LaserJet 2550 series printer must be in a READY state and remain powered on during the entire firmware update process.

* Administrator Privileges are required on the PC executing the utility.

* The control panel of the printer will display a series of flashing lights.

* After the Firmware Update Utility has finished, the HP Color LaserJet 2550 series printer will display a solid green Ready light (second from the bottom). Depending on the operating system on your PC, you may be prompted to reboot your computer.

This utility is for use on Windows 95, 98, ME, 2000 and XP. It can ONLY be used with parallel or USB connections.


Installation Instructions

* For users connected via the network, please temporarily disconnect your HP Color LaserJet 2550 series printer from the network to ensure the network devices to not interrupt the firmware upgrade process.

Parallel Cable connection
Connect a PC to the HP Color LaserJet 2550 series printer via a parallel cable.
You do not need to install the HP software for parallel upgrades.
If the "Add Hardware" wizard starts when you plug in the parallel cable, you can safely cancel it.
Double click the Flash Update utility.
Click 'OK' to begin the process. The utility will go through the following steps:
Close all toolbox and HP software running on the host PC.
Upload firmware to printer, at which point the printer lights will start flashing until complete.
Printer will then erase the old firmware and write the new firmware and reboot it.
Utility will prompt user to reboot PC (to synchronize the printer, restart Toolbox and the HP software)
DO NOT POWER CYCLE THE PRINTER during the upgrade process or it will leave your printer in an unusable state.
Once the utility is complete, it will prompt you to reboot your PC and printer to synchronize the printer and the HP Toolbox.
The firmware update can take up to 5 minutes to complete. Please be patient.
USB Connection
In order to use USB to update your printer, you must have the HP Color LaserJet 2550 series printer software installed on your PC.
You do NOT need to have toolbox installed. A driver only installation will work fine.
Ensure your HP Color LaserJet 2550 series printer is connected to the USB cable.
Double click the Flash Update utility.
Click 'OK' to begin the process. The utility will go through the following steps:
Close all Toolbox and HP software running on host PC.
Upload firmware to printer, at which point the printer lights will flash until complete.
Printer will then erase the old firmware and write the new firmware and reboot itself.
Utility will prompt user to reboot PC (to resync printer, restart toolbox and HP software)
DO NOT POWER CYCLE THE PRINTER during the upgrade process or it will leave your printer in an unusable state.
Once the utility is complete, it will prompt you to reboot your PC and printer to resync the printer and the HP Toolbox.
The firmware update can take up to 5 minutes to complete. Please be patient.
Compañía
Hewlett Packard
Dispositivo
Impresoras y Plotters
Modelo
Hewlett Packard HP Color LaserJet 2550Ln
Descripción
PCL6 Driver
Sistema Operativo
Windows NT4
Idioma
Czech
Versión Driver
4.24.2550.400
Tamaño
2.9Mb
Nombre del archivo
clj2550pcl6winnt4-cz.exe
Información
This section will help you in the download of the software to your computer and start you on the install process.
Before proceeding with the software installation, the printer must first be properly set up, and your computer must be ready to print.
Turn on the printer first, then turn on the computer.
Close any screen savers, virus protection programs, or other software programs running on your computer.
Click on Download Now and a File Download box will appear.
Select Save This Program to Disk and a Save As box will appear.
Select a directory to save the file in and click Save.
Locate the file using Windows Explorer when the download has completed.
Double click on the file. This will extract all the driver files into a directory on your hard drive. The directory these files are extracted to will have a similar name to the file that was downloaded (i.e., c:\clj2550pcl6). However, you can change the path and directory name at the time of extracting the file.
Open the Printers Window (Click Start-Settings-Printers).
Update the printer if it was previously installed
Right click on the printer and select Properties from the pop menu.
On the General tab, select New Driver.
Click on the Warning Box that pops up.
A printer listing box will appear. Select Have Disk.
Another box Install from Disk appears.
Click the Browse to locate the expanded files directory (i.e., c:\clj2550pcl6).
Click on the file ending with .inf .
Click Open and then OK and let files install.
Add the printer if it hasn't been installed yet.
Click Add New Printer
Follow the instructions of the Add Printer Wizard.
Compañía
Hewlett Packard
Dispositivo
Impresoras y Plotters
Modelo
Hewlett Packard HP Color LaserJet 2550Ln
Descripción
PostScript Driver
Sistema Operativo
Windows NT4
Idioma
Czech
Versión Driver
034.4100
Tamaño
1Mb
Nombre del archivo
clj2550pswinnt4-cz.exe
Información
This section will help you in the download of the software to your computer and start you on the install process.
Before proceeding with the software installation, the printer must first be properly set up, and your computer must be ready to print.
Turn on the printer first, then turn on the computer.
Close any screen savers, virus protection programs, or other software programs running on your computer.
Click on Download Now and a File Download box will appear.
Select Save This Program to Disk and a Save As box will appear.
Select a directory to save the file in and click Save.
Locate the file using Windows Explorer when the download has completed.
Double click on the file. This will extract all the driver files into a directory on your hard drive. The directory these files are extracted to will have a similar name to the file that was downloaded (i.e., c:\clj2550ps). However, you can change the path and directory name at the time of extracting the file.
Open the Printers Window (Click Start-Settings-Printers).
Update the printer if it was previously installed
Right click on the printer and select Properties from the pop menu.
On the General tab, select New Driver.
Click on the Warning Box that pops up.
A printer listing box will appear. Select Have Disk.
Another box Install from Disk appears.
Click the Browse to locate the expanded files directory (i.e., c:\clj2550ps).
Click on the file ending with .inf .
Click Open and then OK and let files install.
Add the printer if it hasn't been installed yet.
Click Add New Printer
Follow the instructions of the Add Printer Wizard.
Compañía
Hewlett Packard
Dispositivo
Impresoras y Plotters
Modelo
Hewlett Packard HP Color LaserJet 2550Ln
Descripción
Printing software and utility
Sistema Operativo
Mac OS 9
Idioma
Danish
Versión Utilities
4.1
Tamaño
4Mb
Nombre del archivo
clj2550mac9_x-da.sit
Información
The HP LaserJet Installer provides HP LaserJet PostScript printing support for the Mac 9.1 and 9.2 operating systems.
Compañía
Hewlett Packard
Dispositivo
Impresoras y Plotters
Modelo
Hewlett Packard HP Color LaserJet 2550Ln
Descripción
Installer
Sistema Operativo
Mac OS 9
Idioma
Danish
Versión Driver
4.1
Tamaño
4Mb
Nombre del archivo
clj2550installer-da.sit
Información
HP Color LaserJet 2550 Installer for Mac OS 9.

Compañía
Hewlett Packard
Dispositivo
Impresoras y Plotters
Modelo
Hewlett Packard HP Color LaserJet 2550Ln
Descripción
Firmware Update utility
Sistema Operativo
Mac OS X
Idioma
Danish
Versión Firmware
20040930
Tamaño
5.6Mb
Nombre del archivo
2550_fw_update20040930.dmg
Fecha
28 Jul 2005
Información
WARNING: Determine what the current firmware version of your printer is before downloading the update. If your printer already has the current version (20040930), downloading this file might cause possible performance issues. To determine the version of firmware of your HP Color LaserJet 2550 printer, print a Configuration Page by pressing the Go button (green) and the Cancel button (Red) on the printer's control panel. The firmware version is listed on the top left part of the page, under Product Information - Firmware Datecode.

Firmware Enhancements

These changes are implemented in the new version firmware 20040930:
Default screenmatch color treatment for non-driver PostScript jobs.
Enabled to set FONTSOURCE to a downloaded soft font via PJL.
Cyrillic/Greek/Hebrew font settings now available
Improved memory allocation for complex pages.
The default I/O timeout changed to 120 seconds.
Printing from Mac systems, and printing PDF files, will have an improved CMYK color adjustment.
Calibration will now occur on non-HP refilled cartridge that have the e-label set to "toner out".
Unexpected Paper Size messages are now bypassed by pressing Go or Cancel from the Toolbox utility.
The Supplies Status page will now include the part number for HP cartridges when recognizing a non-HP cartridge installed.
Monochrome print speed will increase by choosing "Print to Grayscale" in the driver's Color tab.

Note: This utility is in English only.

* You will need 20MB of disk space to use the Firmware Update Utility.

* The HP Color LaserJet 2550 series printer must be in a READY state and remain powered on during the entire firmware update process.

* The control panel of the printer will display a series of flashing lights.

* After the Firmware Update Utility has finished, the HP Color LaserJet 2550 series printer will display a solid green Ready light (second from the bottom). You may be prompted to reboot your computer.


Installation Instructions

(NOTE! If you use Internet Explorer to download the utility, it may strip the .dmg extension to the file. Simply re-add the .dmg extension and MAC OS X should recognize the file as a disk image)

This utility is for use on any OS X 10.2 or 10.3 Mac. It will NOT function in the MAC OS 9 environment.

It can only be used with a USB connection to the HP Color LaserJet 2550.

Instructions for upgrade

* For users connected via the network, please temporarily disconnect your HP Color LaserJet 2550 series printer from the network to ensure the network devices to not interrupt the FW upgrade process.
Mount the disk image containing the FW update.
Run the FW Update Application contained in the disk image.
Follow the onscreen prompts to continue.
When prompted, connect the printer via USB.
Upon finding an HP Color LaserJet 2550 series printer, the utility will prompt you to reboot the printer by simply turn the power off and back on. This ensures the printer is in a proper state to receive the update.
Once the printer has been rebooted, the utility will allow you to 'download' the firmware to the HP Color LaserJet 2550 series printer.
DO NOT POWER CYCLE THE PRINTER during the upgrade process or it will leave your printer in an unusable state.
One green LED will start flashing initially followed by 2 LED's flashing.
Once the LEDS stop flashing, the printer has updated and re-initialized, the firmware should be updated.
The firmware update can take up to 5 minutes to complete. Please be patient.
Compañía
Hewlett Packard
Dispositivo
Impresoras y Plotters
Modelo
Hewlett Packard HP Color LaserJet 2550Ln
Descripción
Installer Print Only Software Solution for v10.2 v10.3.x v10.4.x v10.5
Sistema Operativo
Mac OS X
Idioma
Danish
Versión Driver
7.8.0.761
Tamaño
29.1Mb
Nombre del archivo
hp_laserjet_and_edgeline_print-only.dmg
Fecha
28 Jan 2008
Información
This download package contains HP LaserJet Mac OS X Installer Print Only Software Solution v7.8.0.761. Included are the HP Postscript PPD and PDE files for Mac OS X v10.2, v10.3.x, v10.4.x, v10.5 - PPC and Intel processor.
Supported Devices
HP color LaserJet 2500
HP color LaserJet 2550 series
HP color LaserJet 3700
HP color LaserJet 4600
HP color LaserJet 4650
HP color LaserJet 5500
HP Color LaserJet 5550
HP Color LaserJet 8500
HP Color LaserJet 8550
HP color LaserJet 9500
HP color LaserJet 9500 MFP
HP Color LaserJet
HP Color LaserJet 5/5M
HP Color LaserJet 4500
HP Color LaserJet 4550
HP LaserJet 1200
HP LaserJet 1300
HP LaserJet 1300n
HP LaserJet 1320 series
HP LaserJet 2100 Series
HP LaserJet 2200
HP LaserJet 4000 Series
HP LaserJet 4050 Series
HP LaserJet 4100 MFP
HP LaserJet 4100 Series
HP LaserJet 4200
HP LaserJet 4200L
HP LaserJet 4240
HP LaserJet 4240N
HP LaserJet 4250
HP LaserJet 4250L
HP LaserJet 4300
HP LaserJet 4350
HP LaserJet 4350L
HP LaserJet 4V
HP LaserJet 5000 Series
HP LaserJet 5100 Series
HP LaserJet 8000 Series
HP LaserJet 8100 Series
HP LaserJet 8150 Series
HP LaserJet 9000 MFP
HP LaserJet 9000L MFP
HP LaserJet 9000 Series
HP LaserJet 9040
HP LaserJet 9040 MFP
HP LaserJet 9050 MFP
HP LaserJet 9050
HP LaserJet 9055 mfp
HP LaserJet 9065 mfp
HP LaserJet 4 Plus
HP LaserJet 4ML
HP LaserJet 4MP
HP LaserJet 4Si
HP LaserJet 5M
HP LaserJet 5P
HP LaserJet 5Si
HP LaserJet 5Si Mopier
HP LaserJet 6P
HP Mopier 240
HP Mopier 320
HP LaserJet 1220
HP LaserJet 3015
HP LaserJet 3020
HP LaserJet 3030
HP LaserJet 3200
HP LaserJet 3300/3310/3320
HP LaserJet 3300
HP LaserJet 3380
HP business inkjet 2300
HP Business Inkjet 2600
HP Business Inkjet 2800
HP Business Inkjet 3000
HP officejet 9100 series
HP Business Inkjet 2250
HP Business Inkjet 2280
Compañía
Hewlett Packard
Dispositivo
Impresoras y Plotters
Modelo
Hewlett Packard HP Color LaserJet 2550Ln
Descripción
PCL6 Driver
Sistema Operativo
Windows 2000-2003-XP
Idioma
Danish
Versión Driver
60.34.78.41
Tamaño
5.5Mb
Nombre del archivo
clj2550pcl6win2kxp2003-da.exe
Información
Enhancements

Incorporated JPEG compression to reduce spool file size.
Resolves spoolsv.exe crash when printing some PowerPoint documents.
Control Panel simulator in the Services tab is now functional.

This section will help you in the download of the software to your computer and start you on the install process.
Before proceeding with the software installation, the printer must first be properly set up, and your computer must be ready to print.

DOWNLOAD AND EXTRACT THE SOFTWARE

Close any screen savers, virus protection programs, or other software programs running on your computer.
Click on Download Now and a File Download box will appear.
Select Save This Program to Disk and a Save As box will appear.
Select a directory to save the file in and click Save.
Locate the file using Windows Explorer when the download has completed.
Double click on the file. This will extract all the driver files into a directory on your hard drive. The directory these files are extracted to will have a similar name to the file that was downloaded (i.e., c:\clj2550pcl6). However, you can change the path and directory name at the time of extracting the file.
PLEASE USE THESE STEPS IF YOU ARE UPDATING THE HP COLOR LASERJET 2550 DRIVER
From the Windows XP desktop, click Start, and then Printers and Faxes (for Windows 2000, click Start, Settings and then Printers).
Right click on the hp color LaserJet 2550 PCL6 icon or listing, and then click Properties.
Click the Advanced tab.
Make certain the Driver box displays hp color LaserJet 2550 PCL6, and then click New Driver.
In the Add Printer Driver Wizard window, click Have Disk, and then Browse.
Browse to the directory that the downloaded files where unzipped to.

NOTE: The default directory would be C:\clj2550pcl6 (xx represents language, such as en for English)

The Look in box will display clj2550pcl6win2kxp2003-xx (xx represents language, such as en for English). Do not open any folders in this directory. The autorun.ini file should be in the File name box. Click Open.
On the Install From Disk window, click OK. The print driver name, hp color LaserJet 2550 PCL6, should be displayed. Click Next to continue.
When the update is finished, click OK to close the hp color LaserJet 2550 PCL6 Properties window. The update is now complete.
PLEASE USE THESE STEPS IF THIS IS A FIRST TIME INSTALLATION OF THE HP COLOR LASERJET 2550 DRIVER:
Attach a USB or parallel cable to the printer and the computer.
The "Found New Hardware Wizard" should appear. Note: If attaching via a parallel cable it may be necessary to restart the computer for the "Found New Hardware Wizard" to appear.
For Windows XP
Choose "Install from a list or specific location (advanced)" and then click Next.
Select only the box next to "Include this location in the search" (clear all other check boxes) then click the browse button to locate the directory where the driver was extracted to in the steps above. The directory these files are extracted to will have a similar name to the file that was downloaded (i.e., c:\clj2550pcl6).
Click once on the directory name to highlight it then choose OK. The directory path then appears in the dialog.
Select the Next button. Files will be copied to the appropriate directories automatically.
Click the Finish button within the "New Hardware Wizard"
After several moments and message will appear on the system tray (at the bottom right of the screen near the clock) indicating that "Your new hardware has been installed and is ready to use.

For Windows 2000
Click the Next button to continue.
Choose "Search for a suitable driver form my device (recommended)" and then click Next.
Select only the box next to "Specify a location" (clear all other check boxes) and click Next.
Click the browse button to locate the directory where the driver was extracted to in the steps above. The directory these files are extracted to will have a similar name to the file that was downloaded (i.e., c:\clj2550pcl6).
Click once on the directory name to highlight it and then select the Open button.
Autorun.inf should appear in the "file name" box. Click the Open button.
Select OK. The wizard will find the driver for the device.
Click the Next button.
Click Finish. Several dialogs will appear and then disappear.
The printer driver is now installed.
Compañía
Hewlett Packard
Dispositivo
Impresoras y Plotters
Modelo
Hewlett Packard HP Color LaserJet 2550Ln
Descripción
PostScript Driver
Sistema Operativo
Windows 2000-2003-XP
Idioma
Danish
Versión Driver
60.34.78.41
Tamaño
5.3Mb
Nombre del archivo
clj2550pswin2kxp2003-da.exe
Información
Enhancements

Incorporated JPEG compression to reduce spool file size.
Resolves spoolsv.exe crash when printing some PowerPoint documents.
Control Panel simulator in the Services tab is now functional.

This section will help you in the download of the software to your computer and start you on the install process.
Before proceeding with the software installation, the printer must first be properly set up, and your computer must be ready to print.

DOWNLOAD AND EXTRACT THE SOFTWARE

Close any screen savers, virus protection programs, or other software programs running on your computer.
Click on Download Now and a File Download box will appear.
Select Save This Program to Disk and a Save As box will appear.
Select a directory to save the file in and click Save.
Locate the file using Windows Explorer when the download has completed.
Double click on the file. This will extract all the driver files into a directory on your hard drive. The directory these files are extracted to will have a similar name to the file that was downloaded (i.e., c:\clj2550ps). However, you can change the path and directory name at the time of extracting the file.
PLEASE USE THESE STEPS IF YOU ARE UPDATING THE HP COLOR LASERJET 2550 DRIVER
From the Windows XP desktop, click Start, and then Printers and Faxes (for Windows 2000, click Start, Settings and then Printers).
Right click on the hp color LaserJet 2550 PostScript icon or listing, and then click Properties.
Click the Advanced tab.
Make certain the Driver box displays hp color LaserJet 2550 PostScript, and then click New Driver.
In the Add Printer Driver Wizard window, click Have Disk, and then Browse.
Browse to the directory that the downloaded files where unzipped to.

NOTE: The default directory would be c:\clj2550pswin2kxp2003-xx (xx represents language, such as en for English)

The Look in box will display clj2550pswin2kxp2003-xx (xx represents language, such as en for English). Do not open any folders in this directory. The autorun.ini file should be in the File name box. Click Open.
On the Install From Disk window, click OK. The print driver name, hp color LaserJet 2550 PostScript, should be displayed. Click Next to continue.
When the update is finished, click OK to close the hp color LaserJet 2550 PostScript Properties window. The update is now complete.
PLEASE USE THESE STEPS IF THIS IS A FIRST TIME INSTALLATION OF THE HP COLOR LASERJET 2550 DRIVER:
Attach a USB or parallel cable to the printer and the computer.
The "Found New Hardware Wizard" should appear. Note: If attaching via a parallel cable it may be necessary to restart the computer for the "Found New Hardware Wizard" to appear.
For Windows XP
Choose "Install from a list or specific location (advanced)" and then click Next.
Select only the box next to "Include this location in the search" (clear all other check boxes) then click the browse button to locate the directory where the driver was extracted to in the steps above. The directory these files are extracted to will have a similar name to the file that was downloaded (i.e., c:\clj2550ps).
Click once on the directory name to highlight it then choose OK. The directory path then appears in the dialog.
Select the Next button. Files will be copied to the appropriate directories automatically.
Click the Finish button within the "New Hardware Wizard"
After several moments and message will appear on the system tray (at the bottom right of the screen near the clock) indicating that "Your new hardware has been installed and is ready to use.

For Windows 2000
Click the Next button to continue.
Choose "Search for a suitable driver form my device (recommended)" and then click Next.
Select only the box next to "Specify a location" (clear all other check boxes) and click Next.
Click the browse button to locate the directory where the driver was extracted to in the steps above. The directory these files are extracted to will have a similar name to the file that was downloaded (i.e., c:\clj2550ps).
Click once on the directory name to highlight it and then select the Open button.
Autorun.inf should appear in the "file name" box. Click the Open button.
Select OK. The wizard will find the driver for the device.
Click the Next button.
Click Finish. Several dialogs will appear and then disappear.
The printer driver is now installed.
Compañía
Hewlett Packard
Dispositivo
Impresoras y Plotters
Modelo
Hewlett Packard HP Color LaserJet 2550Ln
Descripción
PCL6 Driver
Sistema Operativo
Windows 2000-2003-XP-Vista
Idioma
Danish
Versión Driver
4.5
Tamaño
18Mb
Nombre del archivo
hpupd45pcl632.exe
Fecha
1 Apr 2008
Información
The UPD version 4.5 is the latest version of HP's Universal Print Driver. Please review the entire documentation for information on issues resolved, performance improvements, and new behavior changes to the UPD.
Compañía
Hewlett Packard
Dispositivo
Impresoras y Plotters
Modelo
Hewlett Packard HP Color LaserJet 2550Ln
Descripción
Universal Print Driver PCL 5
Sistema Operativo
Windows 2000-2003-XP-Vista
Idioma
Danish
Versión Driver
4.5
Tamaño
17.8Mb
Nombre del archivo
hpupd45pcl532.exe
Fecha
1 Apr 2008
Información
The UPD version 4.5 is the latest version of HP's Universal Print Driver. Please review the entire documentation for information on issues resolved, performance improvements, and new behavior changes to the UPD.
Compañía
Hewlett Packard
Dispositivo
Impresoras y Plotters
Modelo
Hewlett Packard HP Color LaserJet 2550Ln
Descripción
Universal Print Driver PostScript
Sistema Operativo
Windows 2000-2003-XP-Vista
Idioma
Danish
Versión Driver
4.5
Tamaño
18.6Mb
Nombre del archivo
hpupd45ps32.exe
Fecha
1 Apr 2008
Información
The UPD version 4.5 is the latest version of HP's Universal Print Driver. Please review the entire documentation for information on issues resolved, performance improvements, and new behavior changes to the UPD.
Compañía
Hewlett Packard
Dispositivo
Impresoras y Plotters
Modelo
Hewlett Packard HP Color LaserJet 2550Ln
Descripción
PCL6 Driver
Sistema Operativo
Windows 2003 64 bits-XP 64 bits-Vista 64 bits
Idioma
Danish
Versión Driver
4.5
Tamaño
18.2Mb
Nombre del archivo
hpupd45pcl664.exe
Fecha
1 Apr 2008
Información
The UPD version 4.5 is the latest version of HP's Universal Print Driver. Please review the entire documentation for information on issues resolved, performance improvements, and new behavior changes to the UPD.
Compañía
Hewlett Packard
Dispositivo
Impresoras y Plotters
Modelo
Hewlett Packard HP Color LaserJet 2550Ln
Descripción
PCL5 Driver
Sistema Operativo
Windows 2003 64 bits-XP 64 bits-Vista 64 bits
Idioma
Danish
Versión Driver
4.5
Tamaño
18.2Mb
Nombre del archivo
hpupd45pcl564.exe
Fecha
1 Apr 2008
Información
The UPD version 4.5 is the latest version of HP's Universal Print Driver. Please review the entire documentation for information on issues resolved, performance improvements, and new behavior changes to the UPD.
Compañía
Hewlett Packard
Dispositivo
Impresoras y Plotters
Modelo
Hewlett Packard HP Color LaserJet 2550Ln
Descripción
Universal Print Driver x64 PostScript
Sistema Operativo
Windows 2003 64 bits-XP 64 bits-Vista 64 bits
Idioma
Danish
Versión Driver
4.5
Tamaño
19Mb
Nombre del archivo
hpupd45ps64.exe
Fecha
1 Apr 2008
Información
The UPD version 4.5 is the latest version of HP's Universal Print Driver. Please review the entire documentation for information on issues resolved, performance improvements, and new behavior changes to the UPD.
Compañía
Hewlett Packard
Dispositivo
Impresoras y Plotters
Modelo
Hewlett Packard HP Color LaserJet 2550Ln
Descripción
PCL6 Plug and Play Bundle
Sistema Operativo
Windows 98-Me-2000-2003-XP
Idioma
Danish
Versión Driver
2.0
Tamaño
11.6Mb
Nombre del archivo
clj2550pcl6-da.exe
Información
Use this software for first time USB installations only. Do NOT attach USB cable until prompted by the installation program

If upgrading a previous installation please use the "HP Color LaserJet 2550 PCL6 driver" download and view the description which includes instructions for updating the driver.

HP Color LaserJet 2550 PCL6 Plug and Play Bundle provides the following:

An installation program to assist with installation.
The print drivers are the same as those found on the version 2.0 CD.
Windows 98/ME: 4.24.2550.400
Windows 2000/XP/2003: 60.034.78.41
Plug and Play installable drivers for 1284.4 communication with the device.
Plug and Play installable PCL6 printer driver.
The product CD can be used at a later time to install additional product software, such as Toolbox.
A silent install is provided by running the program from a DOS prompt with the following command line parameters:
lj2550pcl6-en.exe -s -a -silent

This section will help you in the download of the software to your computer and start you on the install process.
Before proceeding with the software installation, the printer must first be properly set up, and your computer must be ready to print.
Close any screen savers, virus protection programs, or other software programs running on your computer.
Click on Download Now and a File Download box will appear.
Select Save This Program to Disk and a Save As box will appear.
Select a directory to save the file in and click Save.
Locate the file using Windows Explorer when the download has completed.
Double click on the file. This will extract all the driver files into a directory on your hard drive. The default directory is Program Files\Hewlett-Packard\Color LaserJet 2550 Drivers. However, you can change the path and directory name at the time of extracting the file.
Follow the instructions presented by the installation program. Do NOT attach the USB cable to the printer until prompted by the installation program.
Compañía
Hewlett Packard
Dispositivo
Impresoras y Plotters
Modelo
Hewlett Packard HP Color LaserJet 2550Ln
Descripción
Firmware Update utility
Sistema Operativo
Windows 98-Me-2000-XP
Idioma
Danish
Versión Firmware
20040930
Tamaño
6.2Mb
Nombre del archivo
flash_5f2550_20040930_rev2.exe
Fecha
11 Oct 2004
Información
WARNING: Determine what the current firmware version of your printer is before downloading the update. If your printer already has the current version (20040930), downloading this file might cause possible performance issues. To determine the version of firmware of your HP Color LaserJet 2550 printer, print a Configuration Page by pressing the Go button (green) and the Cancel button (Red) on the printer's control panel. The firmware version is listed on the top left part of the page, under Product Information - Firmware Datecode.
Firmware Enhancements

These changes are implemented in the new version firmware 20040930:
Default screenmatch color treatment for non-driver PostScript jobs.
Enabled to set FONTSOURCE to a downloaded soft font via PJL.
Cyrillic/Greek/Hebrew font settings now available
Improved memory allocation for complex pages.
The default I/O timeout changed to 120 seconds.
Printing from Mac systems, and printing PDF files, will have an improved CMYK color adjustment.
Calibration will now occur on non-HP refilled cartridge that have the e-label set to "toner out".
Unexpected Paper Size messages are now bypassed by pressing Go or Cancel from the Toolbox utility.
The Supplies Status page will now include the part number for HP cartridges when recognizing a non-HP cartridge installed.
Monochrome print speed will increase by choosing "Print to Grayscale" in the driver's Color tab

Note: This utility is in English only.

* The HP Color LaserJet 2550 series Firmware Update Utility can be performed using either a Parallel or USB port.
When using the USB port, the HP Color LaserJet 2550 series software must be installed prior to using this utility.
When using the parallel port, the HP Color LaserJet 2550 series software does not need to be installed. Connect the 2550 series printer to a PC with the Firmware Update Utility loaded using a parallel cable.
* You will need 20MB of disk space to use the Firmware Update Utility.

* The HP Color LaserJet 2550 series printer must be in a READY state and remain powered on during the entire firmware update process.

* Administrator Privileges are required on the PC executing the utility.

* The control panel of the printer will display a series of flashing lights.

* After the Firmware Update Utility has finished, the HP Color LaserJet 2550 series printer will display a solid green Ready light (second from the bottom). Depending on the operating system on your PC, you may be prompted to reboot your computer.

This utility is for use on Windows 95, 98, ME, 2000 and XP. It can ONLY be used with parallel or USB connections.


Installation Instructions

* For users connected via the network, please temporarily disconnect your HP Color LaserJet 2550 series printer from the network to ensure the network devices to not interrupt the firmware upgrade process.

Parallel Cable connection
Connect a PC to the HP Color LaserJet 2550 series printer via a parallel cable.
You do not need to install the HP software for parallel upgrades.
If the "Add Hardware" wizard starts when you plug in the parallel cable, you can safely cancel it.
Double click the Flash Update utility.
Click 'OK' to begin the process. The utility will go through the following steps:
Close all toolbox and HP software running on the host PC.
Upload firmware to printer, at which point the printer lights will start flashing until complete.
Printer will then erase the old firmware and write the new firmware and reboot it.
Utility will prompt user to reboot PC (to synchronize the printer, restart Toolbox and the HP software)
DO NOT POWER CYCLE THE PRINTER during the upgrade process or it will leave your printer in an unusable state.
Once the utility is complete, it will prompt you to reboot your PC and printer to synchronize the printer and the HP Toolbox.
The firmware update can take up to 5 minutes to complete. Please be patient.
USB Connection
In order to use USB to update your printer, you must have the HP Color LaserJet 2550 series printer software installed on your PC.
You do NOT need to have toolbox installed. A driver only installation will work fine.
Ensure your HP Color LaserJet 2550 series printer is connected to the USB cable.
Double click the Flash Update utility.
Click 'OK' to begin the process. The utility will go through the following steps:
Close all Toolbox and HP software running on host PC.
Upload firmware to printer, at which point the printer lights will flash until complete.
Printer will then erase the old firmware and write the new firmware and reboot itself.
Utility will prompt user to reboot PC (to resync printer, restart toolbox and HP software)
DO NOT POWER CYCLE THE PRINTER during the upgrade process or it will leave your printer in an unusable state.
Once the utility is complete, it will prompt you to reboot your PC and printer to resync the printer and the HP Toolbox.
The firmware update can take up to 5 minutes to complete. Please be patient.
Compañía
Hewlett Packard
Dispositivo
Impresoras y Plotters
Modelo
Hewlett Packard HP Color LaserJet 2550Ln
Descripción
PostScript Driver
Sistema Operativo
Windows NT4
Idioma
Danish
Versión Driver
034.4100
Tamaño
1Mb
Nombre del archivo
clj2550pswinnt4-da.exe
Información
This section will help you in the download of the software to your computer and start you on the install process.
Before proceeding with the software installation, the printer must first be properly set up, and your computer must be ready to print.
Turn on the printer first, then turn on the computer.
Close any screen savers, virus protection programs, or other software programs running on your computer.
Click on Download Now and a File Download box will appear.
Select Save This Program to Disk and a Save As box will appear.
Select a directory to save the file in and click Save.
Locate the file using Windows Explorer when the download has completed.
Double click on the file. This will extract all the driver files into a directory on your hard drive. The directory these files are extracted to will have a similar name to the file that was downloaded (i.e., c:\clj2550ps). However, you can change the path and directory name at the time of extracting the file.
Open the Printers Window (Click Start-Settings-Printers).
Update the printer if it was previously installed
Right click on the printer and select Properties from the pop menu.
On the General tab, select New Driver.
Click on the Warning Box that pops up.
A printer listing box will appear. Select Have Disk.
Another box Install from Disk appears.
Click the Browse to locate the expanded files directory (i.e., c:\clj2550ps).
Click on the file ending with .inf .
Click Open and then OK and let files install.
Add the printer if it hasn't been installed yet.
Click Add New Printer
Follow the instructions of the Add Printer Wizard.
Compañía
Hewlett Packard
Dispositivo
Impresoras y Plotters
Modelo
Hewlett Packard HP Color LaserJet 2550Ln
Descripción
PCL6 Driver
Sistema Operativo
Windows NT4
Idioma
Danish
Versión Driver
4.24.2550.400
Tamaño
2.9Mb
Nombre del archivo
clj2550pcl6winnt4-da.exe
Información
This section will help you in the download of the software to your computer and start you on the install process.
Before proceeding with the software installation, the printer must first be properly set up, and your computer must be ready to print.
Turn on the printer first, then turn on the computer.
Close any screen savers, virus protection programs, or other software programs running on your computer.
Click on Download Now and a File Download box will appear.
Select Save This Program to Disk and a Save As box will appear.
Select a directory to save the file in and click Save.
Locate the file using Windows Explorer when the download has completed.
Double click on the file. This will extract all the driver files into a directory on your hard drive. The directory these files are extracted to will have a similar name to the file that was downloaded (i.e., c:\clj2550pcl6). However, you can change the path and directory name at the time of extracting the file.
Open the Printers Window (Click Start-Settings-Printers).
Update the printer if it was previously installed
Right click on the printer and select Properties from the pop menu.
On the General tab, select New Driver.
Click on the Warning Box that pops up.
A printer listing box will appear. Select Have Disk.
Another box Install from Disk appears.
Click the Browse to locate the expanded files directory (i.e., c:\clj2550pcl6).
Click on the file ending with .inf .
Click Open and then OK and let files install.
Add the printer if it hasn't been installed yet.
Click Add New Printer
Follow the instructions of the Add Printer Wizard.
Compañía
Hewlett Packard
Dispositivo
Impresoras y Plotters
Modelo
Hewlett Packard HP Color LaserJet 2550Ln
Descripción
Installer
Sistema Operativo
Mac OS 9
Idioma
Dutch
Versión Driver
4.1
Tamaño
4Mb
Nombre del archivo
clj2550installer-du.sit
Información
HP Color LaserJet 2550 Installer for Mac OS 9.

Compañía
Hewlett Packard
Dispositivo
Impresoras y Plotters
Modelo
Hewlett Packard HP Color LaserJet 2550Ln
Descripción
Printing software and utility
Sistema Operativo
Mac OS 9
Idioma
Dutch
Versión Utilities
4.1
Tamaño
4Mb
Nombre del archivo
clj2550mac9_x-du.sit
Información
The HP LaserJet Installer provides HP LaserJet PostScript printing support for the Mac 9.1 and 9.2 operating systems.
Compañía
Hewlett Packard
Dispositivo
Impresoras y Plotters
Modelo
Hewlett Packard HP Color LaserJet 2550Ln
Descripción
Installer Print Only Software Solution for v10.2 v10.3.x v10.4.x v10.5
Sistema Operativo
Mac OS X
Idioma
Dutch
Versión Driver
7.8.0.761
Tamaño
29.1Mb
Nombre del archivo
hp_laserjet_and_edgeline_print-only.dmg
Fecha
28 Jan 2008
Información
This download package contains HP LaserJet Mac OS X Installer Print Only Software Solution v7.8.0.761. Included are the HP Postscript PPD and PDE files for Mac OS X v10.2, v10.3.x, v10.4.x, v10.5 - PPC and Intel processor.
Supported Devices
HP color LaserJet 2500
HP color LaserJet 2550 series
HP color LaserJet 3700
HP color LaserJet 4600
HP color LaserJet 4650
HP color LaserJet 5500
HP Color LaserJet 5550
HP Color LaserJet 8500
HP Color LaserJet 8550
HP color LaserJet 9500
HP color LaserJet 9500 MFP
HP Color LaserJet
HP Color LaserJet 5/5M
HP Color LaserJet 4500
HP Color LaserJet 4550
HP LaserJet 1200
HP LaserJet 1300
HP LaserJet 1300n
HP LaserJet 1320 series
HP LaserJet 2100 Series
HP LaserJet 2200
HP LaserJet 4000 Series
HP LaserJet 4050 Series
HP LaserJet 4100 MFP
HP LaserJet 4100 Series
HP LaserJet 4200
HP LaserJet 4200L
HP LaserJet 4240
HP LaserJet 4240N
HP LaserJet 4250
HP LaserJet 4250L
HP LaserJet 4300
HP LaserJet 4350
HP LaserJet 4350L
HP LaserJet 4V
HP LaserJet 5000 Series
HP LaserJet 5100 Series
HP LaserJet 8000 Series
HP LaserJet 8100 Series
HP LaserJet 8150 Series
HP LaserJet 9000 MFP
HP LaserJet 9000L MFP
HP LaserJet 9000 Series
HP LaserJet 9040
HP LaserJet 9040 MFP
HP LaserJet 9050 MFP
HP LaserJet 9050
HP LaserJet 9055 mfp
HP LaserJet 9065 mfp
HP LaserJet 4 Plus
HP LaserJet 4ML
HP LaserJet 4MP
HP LaserJet 4Si
HP LaserJet 5M
HP LaserJet 5P
HP LaserJet 5Si
HP LaserJet 5Si Mopier
HP LaserJet 6P
HP Mopier 240
HP Mopier 320
HP LaserJet 1220
HP LaserJet 3015
HP LaserJet 3020
HP LaserJet 3030
HP LaserJet 3200
HP LaserJet 3300/3310/3320
HP LaserJet 3300
HP LaserJet 3380
HP business inkjet 2300
HP Business Inkjet 2600
HP Business Inkjet 2800
HP Business Inkjet 3000
HP officejet 9100 series
HP Business Inkjet 2250
HP Business Inkjet 2280
Compañía
Hewlett Packard
Dispositivo
Impresoras y Plotters
Modelo
Hewlett Packard HP Color LaserJet 2550Ln
Descripción
Firmware Update utility
Sistema Operativo
Mac OS X
Idioma
Dutch
Versión Firmware
20040930
Tamaño
5.6Mb
Nombre del archivo
2550_fw_update20040930.dmg
Fecha
28 Jul 2005
Información
WARNING: Determine what the current firmware version of your printer is before downloading the update. If your printer already has the current version (20040930), downloading this file might cause possible performance issues. To determine the version of firmware of your HP Color LaserJet 2550 printer, print a Configuration Page by pressing the Go button (green) and the Cancel button (Red) on the printer's control panel. The firmware version is listed on the top left part of the page, under Product Information - Firmware Datecode.

Firmware Enhancements

These changes are implemented in the new version firmware 20040930:
Default screenmatch color treatment for non-driver PostScript jobs.
Enabled to set FONTSOURCE to a downloaded soft font via PJL.
Cyrillic/Greek/Hebrew font settings now available
Improved memory allocation for complex pages.
The default I/O timeout changed to 120 seconds.
Printing from Mac systems, and printing PDF files, will have an improved CMYK color adjustment.
Calibration will now occur on non-HP refilled cartridge that have the e-label set to "toner out".
Unexpected Paper Size messages are now bypassed by pressing Go or Cancel from the Toolbox utility.
The Supplies Status page will now include the part number for HP cartridges when recognizing a non-HP cartridge installed.
Monochrome print speed will increase by choosing "Print to Grayscale" in the driver's Color tab.

Note: This utility is in English only.

* You will need 20MB of disk space to use the Firmware Update Utility.

* The HP Color LaserJet 2550 series printer must be in a READY state and remain powered on during the entire firmware update process.

* The control panel of the printer will display a series of flashing lights.

* After the Firmware Update Utility has finished, the HP Color LaserJet 2550 series printer will display a solid green Ready light (second from the bottom). You may be prompted to reboot your computer.


Installation Instructions

(NOTE! If you use Internet Explorer to download the utility, it may strip the .dmg extension to the file. Simply re-add the .dmg extension and MAC OS X should recognize the file as a disk image)

This utility is for use on any OS X 10.2 or 10.3 Mac. It will NOT function in the MAC OS 9 environment.

It can only be used with a USB connection to the HP Color LaserJet 2550.

Instructions for upgrade

* For users connected via the network, please temporarily disconnect your HP Color LaserJet 2550 series printer from the network to ensure the network devices to not interrupt the FW upgrade process.
Mount the disk image containing the FW update.
Run the FW Update Application contained in the disk image.
Follow the onscreen prompts to continue.
When prompted, connect the printer via USB.
Upon finding an HP Color LaserJet 2550 series printer, the utility will prompt you to reboot the printer by simply turn the power off and back on. This ensures the printer is in a proper state to receive the update.
Once the printer has been rebooted, the utility will allow you to 'download' the firmware to the HP Color LaserJet 2550 series printer.
DO NOT POWER CYCLE THE PRINTER during the upgrade process or it will leave your printer in an unusable state.
One green LED will start flashing initially followed by 2 LED's flashing.
Once the LEDS stop flashing, the printer has updated and re-initialized, the firmware should be updated.
The firmware update can take up to 5 minutes to complete. Please be patient.
Compañía
Hewlett Packard
Dispositivo
Impresoras y Plotters
Modelo
Hewlett Packard HP Color LaserJet 2550Ln
Descripción
PostScript Driver
Sistema Operativo
Windows 2000-2003-XP
Idioma
Dutch
Versión Driver
60.34.78.41
Tamaño
5.3Mb
Nombre del archivo
clj2550pswin2kxp2003-du.exe
Información
Enhancements

Incorporated JPEG compression to reduce spool file size.
Resolves spoolsv.exe crash when printing some PowerPoint documents.
Control Panel simulator in the Services tab is now functional.

This section will help you in the download of the software to your computer and start you on the install process.
Before proceeding with the software installation, the printer must first be properly set up, and your computer must be ready to print.

DOWNLOAD AND EXTRACT THE SOFTWARE

Close any screen savers, virus protection programs, or other software programs running on your computer.
Click on Download Now and a File Download box will appear.
Select Save This Program to Disk and a Save As box will appear.
Select a directory to save the file in and click Save.
Locate the file using Windows Explorer when the download has completed.
Double click on the file. This will extract all the driver files into a directory on your hard drive. The directory these files are extracted to will have a similar name to the file that was downloaded (i.e., c:\clj2550ps). However, you can change the path and directory name at the time of extracting the file.
PLEASE USE THESE STEPS IF YOU ARE UPDATING THE HP COLOR LASERJET 2550 DRIVER
From the Windows XP desktop, click Start, and then Printers and Faxes (for Windows 2000, click Start, Settings and then Printers).
Right click on the hp color LaserJet 2550 PostScript icon or listing, and then click Properties.
Click the Advanced tab.
Make certain the Driver box displays hp color LaserJet 2550 PostScript, and then click New Driver.
In the Add Printer Driver Wizard window, click Have Disk, and then Browse.
Browse to the directory that the downloaded files where unzipped to.

NOTE: The default directory would be c:\clj2550pswin2kxp2003-xx (xx represents language, such as en for English)

The Look in box will display clj2550pswin2kxp2003-xx (xx represents language, such as en for English). Do not open any folders in this directory. The autorun.ini file should be in the File name box. Click Open.
On the Install From Disk window, click OK. The print driver name, hp color LaserJet 2550 PostScript, should be displayed. Click Next to continue.
When the update is finished, click OK to close the hp color LaserJet 2550 PostScript Properties window. The update is now complete.
PLEASE USE THESE STEPS IF THIS IS A FIRST TIME INSTALLATION OF THE HP COLOR LASERJET 2550 DRIVER:
Attach a USB or parallel cable to the printer and the computer.
The "Found New Hardware Wizard" should appear. Note: If attaching via a parallel cable it may be necessary to restart the computer for the "Found New Hardware Wizard" to appear.
For Windows XP
Choose "Install from a list or specific location (advanced)" and then click Next.
Select only the box next to "Include this location in the search" (clear all other check boxes) then click the browse button to locate the directory where the driver was extracted to in the steps above. The directory these files are extracted to will have a similar name to the file that was downloaded (i.e., c:\clj2550ps).
Click once on the directory name to highlight it then choose OK. The directory path then appears in the dialog.
Select the Next button. Files will be copied to the appropriate directories automatically.
Click the Finish button within the "New Hardware Wizard"
After several moments and message will appear on the system tray (at the bottom right of the screen near the clock) indicating that "Your new hardware has been installed and is ready to use.

For Windows 2000
Click the Next button to continue.
Choose "Search for a suitable driver form my device (recommended)" and then click Next.
Select only the box next to "Specify a location" (clear all other check boxes) and click Next.
Click the browse button to locate the directory where the driver was extracted to in the steps above. The directory these files are extracted to will have a similar name to the file that was downloaded (i.e., c:\clj2550ps).
Click once on the directory name to highlight it and then select the Open button.
Autorun.inf should appear in the "file name" box. Click the Open button.
Select OK. The wizard will find the driver for the device.
Click the Next button.
Click Finish. Several dialogs will appear and then disappear.
The printer driver is now installed.
Compañía
Hewlett Packard
Dispositivo
Impresoras y Plotters
Modelo
Hewlett Packard HP Color LaserJet 2550Ln
Descripción
PCL6 Driver
Sistema Operativo
Windows 2000-2003-XP
Idioma
Dutch
Versión Driver
60.34.78.41
Tamaño
5.5Mb
Nombre del archivo
clj2550pcl6win2kxp2003-nl.exe
Información
Enhancements

Incorporated JPEG compression to reduce spool file size.
Resolves spoolsv.exe crash when printing some PowerPoint documents.
Control Panel simulator in the Services tab is now functional.

This section will help you in the download of the software to your computer and start you on the install process.
Before proceeding with the software installation, the printer must first be properly set up, and your computer must be ready to print.

DOWNLOAD AND EXTRACT THE SOFTWARE

Close any screen savers, virus protection programs, or other software programs running on your computer.
Click on Download Now and a File Download box will appear.
Select Save This Program to Disk and a Save As box will appear.
Select a directory to save the file in and click Save.
Locate the file using Windows Explorer when the download has completed.
Double click on the file. This will extract all the driver files into a directory on your hard drive. The directory these files are extracted to will have a similar name to the file that was downloaded (i.e., c:\clj2550pcl6). However, you can change the path and directory name at the time of extracting the file.
PLEASE USE THESE STEPS IF YOU ARE UPDATING THE HP COLOR LASERJET 2550 DRIVER
From the Windows XP desktop, click Start, and then Printers and Faxes (for Windows 2000, click Start, Settings and then Printers).
Right click on the hp color LaserJet 2550 PCL6 icon or listing, and then click Properties.
Click the Advanced tab.
Make certain the Driver box displays hp color LaserJet 2550 PCL6, and then click New Driver.
In the Add Printer Driver Wizard window, click Have Disk, and then Browse.
Browse to the directory that the downloaded files where unzipped to.

NOTE: The default directory would be C:\clj2550pcl6 (xx represents language, such as en for English)

The Look in box will display clj2550pcl6win2kxp2003-xx (xx represents language, such as en for English). Do not open any folders in this directory. The autorun.ini file should be in the File name box. Click Open.
On the Install From Disk window, click OK. The print driver name, hp color LaserJet 2550 PCL6, should be displayed. Click Next to continue.
When the update is finished, click OK to close the hp color LaserJet 2550 PCL6 Properties window. The update is now complete.
PLEASE USE THESE STEPS IF THIS IS A FIRST TIME INSTALLATION OF THE HP COLOR LASERJET 2550 DRIVER:
Attach a USB or parallel cable to the printer and the computer.
The "Found New Hardware Wizard" should appear. Note: If attaching via a parallel cable it may be necessary to restart the computer for the "Found New Hardware Wizard" to appear.
For Windows XP
Choose "Install from a list or specific location (advanced)" and then click Next.
Select only the box next to "Include this location in the search" (clear all other check boxes) then click the browse button to locate the directory where the driver was extracted to in the steps above. The directory these files are extracted to will have a similar name to the file that was downloaded (i.e., c:\clj2550pcl6).
Click once on the directory name to highlight it then choose OK. The directory path then appears in the dialog.
Select the Next button. Files will be copied to the appropriate directories automatically.
Click the Finish button within the "New Hardware Wizard"
After several moments and message will appear on the system tray (at the bottom right of the screen near the clock) indicating that "Your new hardware has been installed and is ready to use.

For Windows 2000
Click the Next button to continue.
Choose "Search for a suitable driver form my device (recommended)" and then click Next.
Select only the box next to "Specify a location" (clear all other check boxes) and click Next.
Click the browse button to locate the directory where the driver was extracted to in the steps above. The directory these files are extracted to will have a similar name to the file that was downloaded (i.e., c:\clj2550pcl6).
Click once on the directory name to highlight it and then select the Open button.
Autorun.inf should appear in the "file name" box. Click the Open button.
Select OK. The wizard will find the driver for the device.
Click the Next button.
Click Finish. Several dialogs will appear and then disappear.
The printer driver is now installed.
Compañía
Hewlett Packard
Dispositivo
Impresoras y Plotters
Modelo
Hewlett Packard HP Color LaserJet 2550Ln
Descripción
PCL6 Driver
Sistema Operativo
Windows 2000-2003-XP-Vista
Idioma
Dutch
Versión Driver
4.5
Tamaño
18Mb
Nombre del archivo
hpupd45pcl632.exe
Fecha
1 Apr 2008
Información
The UPD version 4.5 is the latest version of HP's Universal Print Driver. Please review the entire documentation for information on issues resolved, performance improvements, and new behavior changes to the UPD.
Compañía
Hewlett Packard
Dispositivo
Impresoras y Plotters
Modelo
Hewlett Packard HP Color LaserJet 2550Ln
Descripción
Universal Print Driver PCL 5
Sistema Operativo
Windows 2000-2003-XP-Vista
Idioma
Dutch
Versión Driver
4.5
Tamaño
17.8Mb
Nombre del archivo
hpupd45pcl532.exe
Fecha
1 Apr 2008
Información
The UPD version 4.5 is the latest version of HP's Universal Print Driver. Please review the entire documentation for information on issues resolved, performance improvements, and new behavior changes to the UPD.
Compañía
Hewlett Packard
Dispositivo
Impresoras y Plotters
Modelo
Hewlett Packard HP Color LaserJet 2550Ln
Descripción
Universal Print Driver PostScript
Sistema Operativo
Windows 2000-2003-XP-Vista
Idioma
Dutch
Versión Driver
4.5
Tamaño
18.6Mb
Nombre del archivo
hpupd45ps32.exe
Fecha
1 Apr 2008
Información
The UPD version 4.5 is the latest version of HP's Universal Print Driver. Please review the entire documentation for information on issues resolved, performance improvements, and new behavior changes to the UPD.
Compañía
Hewlett Packard
Dispositivo
Impresoras y Plotters
Modelo
Hewlett Packard HP Color LaserJet 2550Ln
Descripción
Universal Print Driver x64 PostScript
Sistema Operativo
Windows 2003 64 bits-XP 64 bits-Vista 64 bits
Idioma
Dutch
Versión Driver
4.5
Tamaño
19Mb
Nombre del archivo
hpupd45ps64.exe
Fecha
1 Apr 2008
Información
The UPD version 4.5 is the latest version of HP's Universal Print Driver. Please review the entire documentation for information on issues resolved, performance improvements, and new behavior changes to the UPD.
Compañía
Hewlett Packard
Dispositivo
Impresoras y Plotters
Modelo
Hewlett Packard HP Color LaserJet 2550Ln
Descripción
PCL6 Driver
Sistema Operativo
Windows 2003 64 bits-XP 64 bits-Vista 64 bits
Idioma
Dutch
Versión Driver
4.5
Tamaño
18.2Mb
Nombre del archivo
hpupd45pcl664.exe
Fecha
1 Apr 2008
Información
The UPD version 4.5 is the latest version of HP's Universal Print Driver. Please review the entire documentation for information on issues resolved, performance improvements, and new behavior changes to the UPD.
Compañía
Hewlett Packard
Dispositivo
Impresoras y Plotters
Modelo
Hewlett Packard HP Color LaserJet 2550Ln
Descripción
PCL5 Driver
Sistema Operativo
Windows 2003 64 bits-XP 64 bits-Vista 64 bits
Idioma
Dutch
Versión Driver
4.5
Tamaño
18.2Mb
Nombre del archivo
hpupd45pcl564.exe
Fecha
1 Apr 2008
Información
The UPD version 4.5 is the latest version of HP's Universal Print Driver. Please review the entire documentation for information on issues resolved, performance improvements, and new behavior changes to the UPD.
Compañía
Hewlett Packard
Dispositivo
Impresoras y Plotters
Modelo
Hewlett Packard HP Color LaserJet 2550Ln
Descripción
PCL6 Plug and Play Bundle
Sistema Operativo
Windows 98-Me-2000-2003-XP
Idioma
Dutch
Versión Driver
2.0
Tamaño
11.7Mb
Nombre del archivo
clj2550pcl6-du.exe
Información
Use this software for first time USB installations only. Do NOT attach USB cable until prompted by the installation program

If upgrading a previous installation please use the "HP Color LaserJet 2550 PCL6 driver" download and view the description which includes instructions for updating the driver.

HP Color LaserJet 2550 PCL6 Plug and Play Bundle provides the following:

An installation program to assist with installation.
The print drivers are the same as those found on the version 2.0 CD.
Windows 98/ME: 4.24.2550.400
Windows 2000/XP/2003: 60.034.78.41
Plug and Play installable drivers for 1284.4 communication with the device.
Plug and Play installable PCL6 printer driver.
The product CD can be used at a later time to install additional product software, such as Toolbox.
A silent install is provided by running the program from a DOS prompt with the following command line parameters:
lj2550pcl6-en.exe -s -a -silent

This section will help you in the download of the software to your computer and start you on the install process.
Before proceeding with the software installation, the printer must first be properly set up, and your computer must be ready to print.
Close any screen savers, virus protection programs, or other software programs running on your computer.
Click on Download Now and a File Download box will appear.
Select Save This Program to Disk and a Save As box will appear.
Select a directory to save the file in and click Save.
Locate the file using Windows Explorer when the download has completed.
Double click on the file. This will extract all the driver files into a directory on your hard drive. The default directory is Program Files\Hewlett-Packard\Color LaserJet 2550 Drivers. However, you can change the path and directory name at the time of extracting the file.
Follow the instructions presented by the installation program. Do NOT attach the USB cable to the printer until prompted by the installation program.
Compañía
Hewlett Packard
Dispositivo
Impresoras y Plotters
Modelo
Hewlett Packard HP Color LaserJet 2550Ln
Descripción
Firmware Update utility
Sistema Operativo
Windows 98-Me-2000-XP
Idioma
Dutch
Versión Firmware
20040930
Tamaño
6.2Mb
Nombre del archivo
flash_5f2550_20040930_rev2.exe
Fecha
11 Oct 2004
Información
WARNING: Determine what the current firmware version of your printer is before downloading the update. If your printer already has the current version (20040930), downloading this file might cause possible performance issues. To determine the version of firmware of your HP Color LaserJet 2550 printer, print a Configuration Page by pressing the Go button (green) and the Cancel button (Red) on the printer's control panel. The firmware version is listed on the top left part of the page, under Product Information - Firmware Datecode.
Firmware Enhancements

These changes are implemented in the new version firmware 20040930:
Default screenmatch color treatment for non-driver PostScript jobs.
Enabled to set FONTSOURCE to a downloaded soft font via PJL.
Cyrillic/Greek/Hebrew font settings now available
Improved memory allocation for complex pages.
The default I/O timeout changed to 120 seconds.
Printing from Mac systems, and printing PDF files, will have an improved CMYK color adjustment.
Calibration will now occur on non-HP refilled cartridge that have the e-label set to "toner out".
Unexpected Paper Size messages are now bypassed by pressing Go or Cancel from the Toolbox utility.
The Supplies Status page will now include the part number for HP cartridges when recognizing a non-HP cartridge installed.
Monochrome print speed will increase by choosing "Print to Grayscale" in the driver's Color tab

Note: This utility is in English only.

* The HP Color LaserJet 2550 series Firmware Update Utility can be performed using either a Parallel or USB port.
When using the USB port, the HP Color LaserJet 2550 series software must be installed prior to using this utility.
When using the parallel port, the HP Color LaserJet 2550 series software does not need to be installed. Connect the 2550 series printer to a PC with the Firmware Update Utility loaded using a parallel cable.
* You will need 20MB of disk space to use the Firmware Update Utility.

* The HP Color LaserJet 2550 series printer must be in a READY state and remain powered on during the entire firmware update process.

* Administrator Privileges are required on the PC executing the utility.

* The control panel of the printer will display a series of flashing lights.

* After the Firmware Update Utility has finished, the HP Color LaserJet 2550 series printer will display a solid green Ready light (second from the bottom). Depending on the operating system on your PC, you may be prompted to reboot your computer.

This utility is for use on Windows 95, 98, ME, 2000 and XP. It can ONLY be used with parallel or USB connections.


Installation Instructions

* For users connected via the network, please temporarily disconnect your HP Color LaserJet 2550 series printer from the network to ensure the network devices to not interrupt the firmware upgrade process.

Parallel Cable connection
Connect a PC to the HP Color LaserJet 2550 series printer via a parallel cable.
You do not need to install the HP software for parallel upgrades.
If the "Add Hardware" wizard starts when you plug in the parallel cable, you can safely cancel it.
Double click the Flash Update utility.
Click 'OK' to begin the process. The utility will go through the following steps:
Close all toolbox and HP software running on the host PC.
Upload firmware to printer, at which point the printer lights will start flashing until complete.
Printer will then erase the old firmware and write the new firmware and reboot it.
Utility will prompt user to reboot PC (to synchronize the printer, restart Toolbox and the HP software)
DO NOT POWER CYCLE THE PRINTER during the upgrade process or it will leave your printer in an unusable state.
Once the utility is complete, it will prompt you to reboot your PC and printer to synchronize the printer and the HP Toolbox.
The firmware update can take up to 5 minutes to complete. Please be patient.
USB Connection
In order to use USB to update your printer, you must have the HP Color LaserJet 2550 series printer software installed on your PC.
You do NOT need to have toolbox installed. A driver only installation will work fine.
Ensure your HP Color LaserJet 2550 series printer is connected to the USB cable.
Double click the Flash Update utility.
Click 'OK' to begin the process. The utility will go through the following steps:
Close all Toolbox and HP software running on host PC.
Upload firmware to printer, at which point the printer lights will flash until complete.
Printer will then erase the old firmware and write the new firmware and reboot itself.
Utility will prompt user to reboot PC (to resync printer, restart toolbox and HP software)
DO NOT POWER CYCLE THE PRINTER during the upgrade process or it will leave your printer in an unusable state.
Once the utility is complete, it will prompt you to reboot your PC and printer to resync the printer and the HP Toolbox.
The firmware update can take up to 5 minutes to complete. Please be patient.
Compañía
Hewlett Packard
Dispositivo
Impresoras y Plotters
Modelo
Hewlett Packard HP Color LaserJet 2550Ln
Descripción
PostScript Driver
Sistema Operativo
Windows NT4
Idioma
Dutch
Versión Driver
034.4100
Tamaño
1Mb
Nombre del archivo
clj2550pswinnt4-du.exe
Información
This section will help you in the download of the software to your computer and start you on the install process.
Before proceeding with the software installation, the printer must first be properly set up, and your computer must be ready to print.
Turn on the printer first, then turn on the computer.
Close any screen savers, virus protection programs, or other software programs running on your computer.
Click on Download Now and a File Download box will appear.
Select Save This Program to Disk and a Save As box will appear.
Select a directory to save the file in and click Save.
Locate the file using Windows Explorer when the download has completed.
Double click on the file. This will extract all the driver files into a directory on your hard drive. The directory these files are extracted to will have a similar name to the file that was downloaded (i.e., c:\clj2550ps). However, you can change the path and directory name at the time of extracting the file.
Open the Printers Window (Click Start-Settings-Printers).
Update the printer if it was previously installed
Right click on the printer and select Properties from the pop menu.
On the General tab, select New Driver.
Click on the Warning Box that pops up.
A printer listing box will appear. Select Have Disk.
Another box Install from Disk appears.
Click the Browse to locate the expanded files directory (i.e., c:\clj2550ps).
Click on the file ending with .inf .
Click Open and then OK and let files install.
Add the printer if it hasn't been installed yet.
Click Add New Printer
Follow the instructions of the Add Printer Wizard.
Compañía
Hewlett Packard
Dispositivo
Impresoras y Plotters
Modelo
Hewlett Packard HP Color LaserJet 2550Ln
Descripción
PCL6 Driver
Sistema Operativo
Windows NT4
Idioma
Dutch
Versión Driver
4.24.2550.400
Tamaño
2.9Mb
Nombre del archivo
clj2550pcl6winnt4-du.exe
Información
This section will help you in the download of the software to your computer and start you on the install process.
Before proceeding with the software installation, the printer must first be properly set up, and your computer must be ready to print.
Turn on the printer first, then turn on the computer.
Close any screen savers, virus protection programs, or other software programs running on your computer.
Click on Download Now and a File Download box will appear.
Select Save This Program to Disk and a Save As box will appear.
Select a directory to save the file in and click Save.
Locate the file using Windows Explorer when the download has completed.
Double click on the file. This will extract all the driver files into a directory on your hard drive. The directory these files are extracted to will have a similar name to the file that was downloaded (i.e., c:\clj2550pcl6). However, you can change the path and directory name at the time of extracting the file.
Open the Printers Window (Click Start-Settings-Printers).
Update the printer if it was previously installed
Right click on the printer and select Properties from the pop menu.
On the General tab, select New Driver.
Click on the Warning Box that pops up.
A printer listing box will appear. Select Have Disk.
Another box Install from Disk appears.
Click the Browse to locate the expanded files directory (i.e., c:\clj2550pcl6).
Click on the file ending with .inf .
Click Open and then OK and let files install.
Add the printer if it hasn't been installed yet.
Click Add New Printer
Follow the instructions of the Add Printer Wizard.
Compañía
Hewlett Packard
Dispositivo
Impresoras y Plotters
Modelo
Hewlett Packard HP Color LaserJet 2550Ln
Descripción
Firmware Update utility
Sistema Operativo
Mac OS X
Idioma
English
Versión Firmware
20040930
Tamaño
5.6Mb
Nombre del archivo
2550_fw_update20040930.dmg
Fecha
20040930
Información
WARNING: Determine what the current firmware version of your printer is before downloading the update. If your printer already has the current version (20040930), downloading this file might cause possible performance issues. To determine the version of firmware of your HP Color LaserJet 2550 printer, print a Configuration Page by pressing the Go button (green) and the Cancel button (Red) on the printer's control panel. The firmware version is listed on the top left part of the page, under Product Information - Firmware Datecode.

Firmware Enhancements

These changes are implemented in the new version firmware 20040930:
Default screenmatch color treatment for non-driver PostScript jobs.
Enabled to set FONTSOURCE to a downloaded soft font via PJL.
Cyrillic/Greek/Hebrew font settings now available
Improved memory allocation for complex pages.
The default I/O timeout changed to 120 seconds.
Printing from Mac systems, and printing PDF files, will have an improved CMYK color adjustment.
Calibration will now occur on non-HP refilled cartridge that have the e-label set to "toner out".
Unexpected Paper Size messages are now bypassed by pressing Go or Cancel from the Toolbox utility.
The Supplies Status page will now include the part number for HP cartridges when recognizing a non-HP cartridge installed.
Monochrome print speed will increase by choosing "Print to Grayscale" in the driver's Color tab.

Note: This utility is in English only.

* You will need 20MB of disk space to use the Firmware Update Utility.

* The HP Color LaserJet 2550 series printer must be in a READY state and remain powered on during the entire firmware update process.

* The control panel of the printer will display a series of flashing lights.

* After the Firmware Update Utility has finished, the HP Color LaserJet 2550 series printer will display a solid green Ready light (second from the bottom). You may be prompted to reboot your computer.

Installation Instructions

(NOTE! If you use Internet Explorer to download the utility, it may strip the .dmg extension to the file. Simply re-add the .dmg extension and MAC OS X should recognize the file as a disk image)

This utility is for use on any OS X 10.2 or 10.3 Mac. It will NOT function in the MAC OS 9 environment.

It can only be used with a USB connection to the HP Color LaserJet 2550.

Instructions for upgrade

* For users connected via the network, please temporarily disconnect your HP Color LaserJet 2550 series printer from the network to ensure the network devices to not interrupt the FW upgrade process.
Mount the disk image containing the FW update.
Run the FW Update Application contained in the disk image.
Follow the onscreen prompts to continue.
When prompted, connect the printer via USB.
Upon finding an HP Color LaserJet 2550 series printer, the utility will prompt you to reboot the printer by simply turn the power off and back on. This ensures the printer is in a proper state to receive the update.
Once the printer has been rebooted, the utility will allow you to 'download' the firmware to the HP Color LaserJet 2550 series printer.
DO NOT POWER CYCLE THE PRINTER during the upgrade process or it will leave your printer in an unusable state.
One green LED will start flashing initially followed by 2 LED's flashing.
Once the LEDS stop flashing, the printer has updated and re-initialized, the firmware should be updated.
The firmware update can take up to 5 minutes to complete. Please be patient.
Compañía
Hewlett Packard
Dispositivo
Impresoras y Plotters
Modelo
Hewlett Packard HP Color LaserJet 2550Ln
Descripción
Installer
Sistema Operativo
Mac OS X
Idioma
English
Versión Driver
5.5.2
Tamaño
14.7Mb
Nombre del archivo
hplaserjet_v5_5_2.dmg
Información
This download package contains HP LaserJet Mac OS X Installer with updated PPD and PDE (Univeral Binary) files. Full printing support for Mac OS X v10.2.8, v10.3, v10.4 PPC and Intel processor Macs is included with this download.

Compañía
Hewlett Packard
Dispositivo
Impresoras y Plotters
Modelo
Hewlett Packard HP Color LaserJet 2550Ln
Descripción
PCL6 Driver
Sistema Operativo
Windows 2000-2003-XP-Vista
Idioma
English
Versión Driver
4.1
Tamaño
17.4Mb
Nombre del archivo
hpupd41pcl632.exe
Información
The UPD version 4.1 is the latest version of HP's Universal Print Driver. Please review the entire documentation for information on issues resolved, performance improvements, and new behavior changes to the UPD.
Compañía
Hewlett Packard
Dispositivo
Impresoras y Plotters
Modelo
Hewlett Packard HP Color LaserJet 2550Ln
Descripción
Universal Print Driver PostScript
Sistema Operativo
Windows 2000-2003-XP-Vista
Idioma
English
Versión Driver
4.1
Tamaño
16.5Mb
Nombre del archivo
hpupd41ps32.exe
Información
The UPD version 4.1 is the latest version of HP's Universal Print Driver. Please review the entire documentation for information on issues resolved, performance improvements, and new behavior changes to the UPD.
Compañía
Hewlett Packard
Dispositivo
Impresoras y Plotters
Modelo
Hewlett Packard HP Color LaserJet 2550Ln
Descripción
Universal Print Driver PCL 5
Sistema Operativo
Windows 2000-2003-XP-Vista
Idioma
English
Versión Driver
4.1
Tamaño
16.9Mb
Nombre del archivo
hpupd41pcl532.exe
Información
The UPD version 4.1 is the latest version of HP's Universal Print Driver. Please review the entire documentation for information on issues resolved, performance improvements, and new behavior changes to the UPD.
Compañía
Hewlett Packard
Dispositivo
Impresoras y Plotters
Modelo
Hewlett Packard HP Color LaserJet 2550Ln
Descripción
PCL5 Driver
Sistema Operativo
Windows 2003 64 bits-XP 64 bits-Vista 64 bits
Idioma
English
Versión Driver
4.1
Tamaño
9.1Mb
Nombre del archivo
hpupd41pcl5x64.exe
Información
The UPD version 4.1 is the latest version of HP's Universal Print Driver. Please review the entire documentation for information on issues resolved, performance improvements, and new behavior changes to the UPD.
Compañía
Hewlett Packard
Dispositivo
Impresoras y Plotters
Modelo
Hewlett Packard HP Color LaserJet 2550Ln
Descripción
Universal Print Driver x64 PostScript
Sistema Operativo
Windows 2003 64 bits-XP 64 bits-Vista 64 bits
Idioma
English
Versión Driver
4.1
Tamaño
9.5Mb
Nombre del archivo
hpupd41psx64.exe
Información
The UPD version 4.1 is the latest version of HP's Universal Print Driver. Please review the entire documentation for information on issues resolved, performance improvements, and new behavior changes to the UPD.
Compañía
Hewlett Packard
Dispositivo
Impresoras y Plotters
Modelo
Hewlett Packard HP Color LaserJet 2550Ln
Descripción
PCL6 Driver
Sistema Operativo
Windows 2003 64 bits-XP 64 bits-Vista 64 bits
Idioma
English
Versión Driver
4.1
Tamaño
9.1Mb
Nombre del archivo
hpupd41pcl6x64.exe
Información
The UPD version 4.1 is the latest version of HP's Universal Print Driver. Please review the entire documentation for information on issues resolved, performance improvements, and new behavior changes to the UPD.
Compañía
Hewlett Packard
Dispositivo
Impresoras y Plotters
Modelo
Hewlett Packard HP Color LaserJet 2550Ln
Descripción
Installer
Sistema Operativo
Mac OS 9
Idioma
English American
Versión Driver
4.1
Tamaño
4.2Mb
Nombre del archivo
clj2550installer-en.sit
Información
HP Color LaserJet 2550 Installer for Mac OS 9.

Compañía
Hewlett Packard
Dispositivo
Impresoras y Plotters
Modelo
Hewlett Packard HP Color LaserJet 2550Ln
Descripción
Printing software and utility
Sistema Operativo
Mac OS 9
Idioma
English American
Versión Utilities
4.1
Tamaño
4.2Mb
Nombre del archivo
clj2550mac9_x-en.sit
Información
The HP LaserJet Installer provides HP LaserJet PostScript printing support for the Mac 9.1 and 9.2 operating systems.
Compañía
Hewlett Packard
Dispositivo
Impresoras y Plotters
Modelo
Hewlett Packard HP Color LaserJet 2550Ln
Descripción
Firmware Update utility
Sistema Operativo
Mac OS X
Idioma
English American
Versión Firmware
20040930
Tamaño
5.6Mb
Nombre del archivo
2550_fw_update20040930.dmg
Fecha
28 Jul 2005
Información
WARNING: Determine what the current firmware version of your printer is before downloading the update. If your printer already has the current version (20040930), downloading this file might cause possible performance issues. To determine the version of firmware of your HP Color LaserJet 2550 printer, print a Configuration Page by pressing the Go button (green) and the Cancel button (Red) on the printer's control panel. The firmware version is listed on the top left part of the page, under Product Information - Firmware Datecode.

Firmware Enhancements

These changes are implemented in the new version firmware 20040930:
Default screenmatch color treatment for non-driver PostScript jobs.
Enabled to set FONTSOURCE to a downloaded soft font via PJL.
Cyrillic/Greek/Hebrew font settings now available
Improved memory allocation for complex pages.
The default I/O timeout changed to 120 seconds.
Printing from Mac systems, and printing PDF files, will have an improved CMYK color adjustment.
Calibration will now occur on non-HP refilled cartridge that have the e-label set to "toner out".
Unexpected Paper Size messages are now bypassed by pressing Go or Cancel from the Toolbox utility.
The Supplies Status page will now include the part number for HP cartridges when recognizing a non-HP cartridge installed.
Monochrome print speed will increase by choosing "Print to Grayscale" in the driver's Color tab.

Note: This utility is in English only.

* You will need 20MB of disk space to use the Firmware Update Utility.

* The HP Color LaserJet 2550 series printer must be in a READY state and remain powered on during the entire firmware update process.

* The control panel of the printer will display a series of flashing lights.

* After the Firmware Update Utility has finished, the HP Color LaserJet 2550 series printer will display a solid green Ready light (second from the bottom). You may be prompted to reboot your computer.


Installation Instructions

(NOTE! If you use Internet Explorer to download the utility, it may strip the .dmg extension to the file. Simply re-add the .dmg extension and MAC OS X should recognize the file as a disk image)

This utility is for use on any OS X 10.2 or 10.3 Mac. It will NOT function in the MAC OS 9 environment.

It can only be used with a USB connection to the HP Color LaserJet 2550.

Instructions for upgrade

* For users connected via the network, please temporarily disconnect your HP Color LaserJet 2550 series printer from the network to ensure the network devices to not interrupt the FW upgrade process.
Mount the disk image containing the FW update.
Run the FW Update Application contained in the disk image.
Follow the onscreen prompts to continue.
When prompted, connect the printer via USB.
Upon finding an HP Color LaserJet 2550 series printer, the utility will prompt you to reboot the printer by simply turn the power off and back on. This ensures the printer is in a proper state to receive the update.
Once the printer has been rebooted, the utility will allow you to 'download' the firmware to the HP Color LaserJet 2550 series printer.
DO NOT POWER CYCLE THE PRINTER during the upgrade process or it will leave your printer in an unusable state.
One green LED will start flashing initially followed by 2 LED's flashing.
Once the LEDS stop flashing, the printer has updated and re-initialized, the firmware should be updated.
The firmware update can take up to 5 minutes to complete. Please be patient.
Compañía
Hewlett Packard
Dispositivo
Impresoras y Plotters
Modelo
Hewlett Packard HP Color LaserJet 2550Ln
Descripción
Installer Print Only Software Solution for v10.2 v10.3.x v10.4.x v10.5
Sistema Operativo
Mac OS X
Idioma
English American
Versión Driver
7.8.0.761
Tamaño
29.1Mb
Nombre del archivo
hp_laserjet_and_edgeline_print-only.dmg
Fecha
28 Jan 2008
Información
This download package contains HP LaserJet Mac OS X Installer Print Only Software Solution v7.8.0.761. Included are the HP Postscript PPD and PDE files for Mac OS X v10.2, v10.3.x, v10.4.x, v10.5 - PPC and Intel processor.
Supported Devices
HP color LaserJet 2500
HP color LaserJet 2550 series
HP color LaserJet 3700
HP color LaserJet 4600
HP color LaserJet 4650
HP color LaserJet 5500
HP Color LaserJet 5550
HP Color LaserJet 8500
HP Color LaserJet 8550
HP color LaserJet 9500
HP color LaserJet 9500 MFP
HP Color LaserJet
HP Color LaserJet 5/5M
HP Color LaserJet 4500
HP Color LaserJet 4550
HP LaserJet 1200
HP LaserJet 1300
HP LaserJet 1300n
HP LaserJet 1320 series
HP LaserJet 2100 Series
HP LaserJet 2200
HP LaserJet 4000 Series
HP LaserJet 4050 Series
HP LaserJet 4100 MFP
HP LaserJet 4100 Series
HP LaserJet 4200
HP LaserJet 4200L
HP LaserJet 4240
HP LaserJet 4240N
HP LaserJet 4250
HP LaserJet 4250L
HP LaserJet 4300
HP LaserJet 4350
HP LaserJet 4350L
HP LaserJet 4V
HP LaserJet 5000 Series
HP LaserJet 5100 Series
HP LaserJet 8000 Series
HP LaserJet 8100 Series
HP LaserJet 8150 Series
HP LaserJet 9000 MFP
HP LaserJet 9000L MFP
HP LaserJet 9000 Series
HP LaserJet 9040
HP LaserJet 9040 MFP
HP LaserJet 9050 MFP
HP LaserJet 9050
HP LaserJet 9055 mfp
HP LaserJet 9065 mfp
HP LaserJet 4 Plus
HP LaserJet 4ML
HP LaserJet 4MP
HP LaserJet 4Si
HP LaserJet 5M
HP LaserJet 5P
HP LaserJet 5Si
HP LaserJet 5Si Mopier
HP LaserJet 6P
HP Mopier 240
HP Mopier 320
HP LaserJet 1220
HP LaserJet 3015
HP LaserJet 3020
HP LaserJet 3030
HP LaserJet 3200
HP LaserJet 3300/3310/3320
HP LaserJet 3300
HP LaserJet 3380
HP business inkjet 2300
HP Business Inkjet 2600
HP Business Inkjet 2800
HP Business Inkjet 3000
HP officejet 9100 series
HP Business Inkjet 2250
HP Business Inkjet 2280
Compañía
Hewlett Packard
Dispositivo
Impresoras y Plotters
Modelo
Hewlett Packard HP Color LaserJet 2550Ln
Descripción
PostScript Driver
Sistema Operativo
Windows 2000-2003-XP
Idioma
English American
Versión Driver
60.34.78.41
Tamaño
5.1Mb
Nombre del archivo
clj2550pswin2kxp2003-en.exe
Información
Enhancements

Incorporated JPEG compression to reduce spool file size.
Resolves spoolsv.exe crash when printing some PowerPoint documents.
Control Panel simulator in the Services tab is now functional.

This section will help you in the download of the software to your computer and start you on the install process.
Before proceeding with the software installation, the printer must first be properly set up, and your computer must be ready to print.

DOWNLOAD AND EXTRACT THE SOFTWARE

Close any screen savers, virus protection programs, or other software programs running on your computer.
Click on Download Now and a File Download box will appear.
Select Save This Program to Disk and a Save As box will appear.
Select a directory to save the file in and click Save.
Locate the file using Windows Explorer when the download has completed.
Double click on the file. This will extract all the driver files into a directory on your hard drive. The directory these files are extracted to will have a similar name to the file that was downloaded (i.e., c:\clj2550ps). However, you can change the path and directory name at the time of extracting the file.
PLEASE USE THESE STEPS IF YOU ARE UPDATING THE HP COLOR LASERJET 2550 DRIVER
From the Windows XP desktop, click Start, and then Printers and Faxes (for Windows 2000, click Start, Settings and then Printers).
Right click on the hp color LaserJet 2550 PostScript icon or listing, and then click Properties.
Click the Advanced tab.
Make certain the Driver box displays hp color LaserJet 2550 PostScript, and then click New Driver.
In the Add Printer Driver Wizard window, click Have Disk, and then Browse.
Browse to the directory that the downloaded files where unzipped to.

NOTE: The default directory would be c:\clj2550pswin2kxp2003-xx (xx represents language, such as en for English)

The Look in box will display clj2550pswin2kxp2003-xx (xx represents language, such as en for English). Do not open any folders in this directory. The autorun.ini file should be in the File name box. Click Open.
On the Install From Disk window, click OK. The print driver name, hp color LaserJet 2550 PostScript, should be displayed. Click Next to continue.
When the update is finished, click OK to close the hp color LaserJet 2550 PostScript Properties window. The update is now complete.
PLEASE USE THESE STEPS IF THIS IS A FIRST TIME INSTALLATION OF THE HP COLOR LASERJET 2550 DRIVER:
Attach a USB or parallel cable to the printer and the computer.
The "Found New Hardware Wizard" should appear. Note: If attaching via a parallel cable it may be necessary to restart the computer for the "Found New Hardware Wizard" to appear.
For Windows XP
Choose "Install from a list or specific location (advanced)" and then click Next.
Select only the box next to "Include this location in the search" (clear all other check boxes) then click the browse button to locate the directory where the driver was extracted to in the steps above. The directory these files are extracted to will have a similar name to the file that was downloaded (i.e., c:\clj2550ps).
Click once on the directory name to highlight it then choose OK. The directory path then appears in the dialog.
Select the Next button. Files will be copied to the appropriate directories automatically.
Click the Finish button within the "New Hardware Wizard"
After several moments and message will appear on the system tray (at the bottom right of the screen near the clock) indicating that "Your new hardware has been installed and is ready to use.

For Windows 2000
Click the Next button to continue.
Choose "Search for a suitable driver form my device (recommended)" and then click Next.
Select only the box next to "Specify a location" (clear all other check boxes) and click Next.
Click the browse button to locate the directory where the driver was extracted to in the steps above. The directory these files are extracted to will have a similar name to the file that was downloaded (i.e., c:\clj2550ps).
Click once on the directory name to highlight it and then select the Open button.
Autorun.inf should appear in the "file name" box. Click the Open button.
Select OK. The wizard will find the driver for the device.
Click the Next button.
Click Finish. Several dialogs will appear and then disappear.
The printer driver is now installed.
Compañía
Hewlett Packard
Dispositivo
Impresoras y Plotters
Modelo
Hewlett Packard HP Color LaserJet 2550Ln
Descripción
PCL6 Driver
Sistema Operativo
Windows 2000-2003-XP
Idioma
English American
Versión Driver
60.34.78.41
Tamaño
5.5Mb
Nombre del archivo
clj2550pcl6win2kxp2003-en.exe
Información
Enhancements

Incorporated JPEG compression to reduce spool file size.
Resolves spoolsv.exe crash when printing some PowerPoint documents.
Control Panel simulator in the Services tab is now functional.

This section will help you in the download of the software to your computer and start you on the install process.
Before proceeding with the software installation, the printer must first be properly set up, and your computer must be ready to print.

DOWNLOAD AND EXTRACT THE SOFTWARE

Close any screen savers, virus protection programs, or other software programs running on your computer.
Click on Download Now and a File Download box will appear.
Select Save This Program to Disk and a Save As box will appear.
Select a directory to save the file in and click Save.
Locate the file using Windows Explorer when the download has completed.
Double click on the file. This will extract all the driver files into a directory on your hard drive. The directory these files are extracted to will have a similar name to the file that was downloaded (i.e., c:\clj2550pcl6). However, you can change the path and directory name at the time of extracting the file.
PLEASE USE THESE STEPS IF YOU ARE UPDATING THE HP COLOR LASERJET 2550 DRIVER
From the Windows XP desktop, click Start, and then Printers and Faxes (for Windows 2000, click Start, Settings and then Printers).
Right click on the hp color LaserJet 2550 PCL6 icon or listing, and then click Properties.
Click the Advanced tab.
Make certain the Driver box displays hp color LaserJet 2550 PCL6, and then click New Driver.
In the Add Printer Driver Wizard window, click Have Disk, and then Browse.
Browse to the directory that the downloaded files where unzipped to.

NOTE: The default directory would be C:\clj2550pcl6 (xx represents language, such as en for English)

The Look in box will display clj2550pcl6win2kxp2003-xx (xx represents language, such as en for English). Do not open any folders in this directory. The autorun.ini file should be in the File name box. Click Open.
On the Install From Disk window, click OK. The print driver name, hp color LaserJet 2550 PCL6, should be displayed. Click Next to continue.
When the update is finished, click OK to close the hp color LaserJet 2550 PCL6 Properties window. The update is now complete.
PLEASE USE THESE STEPS IF THIS IS A FIRST TIME INSTALLATION OF THE HP COLOR LASERJET 2550 DRIVER:
Attach a USB or parallel cable to the printer and the computer.
The "Found New Hardware Wizard" should appear. Note: If attaching via a parallel cable it may be necessary to restart the computer for the "Found New Hardware Wizard" to appear.
For Windows XP
Choose "Install from a list or specific location (advanced)" and then click Next.
Select only the box next to "Include this location in the search" (clear all other check boxes) then click the browse button to locate the directory where the driver was extracted to in the steps above. The directory these files are extracted to will have a similar name to the file that was downloaded (i.e., c:\clj2550pcl6).
Click once on the directory name to highlight it then choose OK. The directory path then appears in the dialog.
Select the Next button. Files will be copied to the appropriate directories automatically.
Click the Finish button within the "New Hardware Wizard"
After several moments and message will appear on the system tray (at the bottom right of the screen near the clock) indicating that "Your new hardware has been installed and is ready to use.

For Windows 2000
Click the Next button to continue.
Choose "Search for a suitable driver form my device (recommended)" and then click Next.
Select only the box next to "Specify a location" (clear all other check boxes) and click Next.
Click the browse button to locate the directory where the driver was extracted to in the steps above. The directory these files are extracted to will have a similar name to the file that was downloaded (i.e., c:\clj2550pcl6).
Click once on the directory name to highlight it and then select the Open button.
Autorun.inf should appear in the "file name" box. Click the Open button.
Select OK. The wizard will find the driver for the device.
Click the Next button.
Click Finish. Several dialogs will appear and then disappear.
The printer driver is now installed.
Compañía
Hewlett Packard
Dispositivo
Impresoras y Plotters
Modelo
Hewlett Packard HP Color LaserJet 2550Ln
Descripción
PCL6 Driver
Sistema Operativo
Windows 2000-2003-XP-Vista
Idioma
English American
Versión Driver
4.5
Tamaño
18Mb
Nombre del archivo
hpupd45pcl632.exe
Fecha
1 Apr 2008
Información
The UPD version 4.5 is the latest version of HP's Universal Print Driver. Please review the entire documentation for information on issues resolved, performance improvements, and new behavior changes to the UPD.
Compañía
Hewlett Packard
Dispositivo
Impresoras y Plotters
Modelo
Hewlett Packard HP Color LaserJet 2550Ln
Descripción
Universal Print Driver PostScript
Sistema Operativo
Windows 2000-2003-XP-Vista
Idioma
English American
Versión Driver
4.5
Tamaño
18.6Mb
Nombre del archivo
hpupd45ps32.exe
Fecha
1 Apr 2008
Información
The UPD version 4.5 is the latest version of HP's Universal Print Driver. Please review the entire documentation for information on issues resolved, performance improvements, and new behavior changes to the UPD.
Compañía
Hewlett Packard
Dispositivo
Impresoras y Plotters
Modelo
Hewlett Packard HP Color LaserJet 2550Ln
Descripción
Universal Print Driver PCL 5
Sistema Operativo
Windows 2000-2003-XP-Vista
Idioma
English American
Versión Driver
4.5
Tamaño
17.8Mb
Nombre del archivo
hpupd45pcl532.exe
Fecha
1 Apr 2008
Información
The UPD version 4.5 is the latest version of HP's Universal Print Driver. Please review the entire documentation for information on issues resolved, performance improvements, and new behavior changes to the UPD.
Compañía
Hewlett Packard
Dispositivo
Impresoras y Plotters
Modelo
Hewlett Packard HP Color LaserJet 2550Ln
Descripción
PCL5 Driver
Sistema Operativo
Windows 2003 64 bits-XP 64 bits-Vista 64 bits
Idioma
English American
Versión Driver
4.5
Tamaño
18.2Mb
Nombre del archivo
hpupd45pcl564.exe
Fecha
1 Apr 2008
Información
The UPD version 4.5 is the latest version of HP's Universal Print Driver. Please review the entire documentation for information on issues resolved, performance improvements, and new behavior changes to the UPD.
Compañía
Hewlett Packard
Dispositivo
Impresoras y Plotters
Modelo
Hewlett Packard HP Color LaserJet 2550Ln
Descripción
Universal Print Driver x64 PostScript
Sistema Operativo
Windows 2003 64 bits-XP 64 bits-Vista 64 bits
Idioma
English American
Versión Driver
4.5
Tamaño
19Mb
Nombre del archivo
hpupd45ps64.exe
Fecha
1 Apr 2008
Información
The UPD version 4.5 is the latest version of HP's Universal Print Driver. Please review the entire documentation for information on issues resolved, performance improvements, and new behavior changes to the UPD.
Compañía
Hewlett Packard
Dispositivo
Impresoras y Plotters
Modelo
Hewlett Packard HP Color LaserJet 2550Ln
Descripción
PCL6 Driver
Sistema Operativo
Windows 2003 64 bits-XP 64 bits-Vista 64 bits
Idioma
English American
Versión Driver
4.5
Tamaño
18.2Mb
Nombre del archivo
hpupd45pcl664.exe
Fecha
1 Apr 2008
Información
The UPD version 4.5 is the latest version of HP's Universal Print Driver. Please review the entire documentation for information on issues resolved, performance improvements, and new behavior changes to the UPD.
Compañía
Hewlett Packard
Dispositivo
Impresoras y Plotters
Modelo
Hewlett Packard HP Color LaserJet 2550Ln
Descripción
PCL6 Plug and Play Bundle
Sistema Operativo
Windows 98-Me-2000-2003-XP
Idioma
English American
Versión Driver
2.0
Tamaño
11.6Mb
Nombre del archivo
clj2550pcl6-en.exe
Información
Use this software for first time USB installations only. Do NOT attach USB cable until prompted by the installation program

If upgrading a previous installation please use the "HP Color LaserJet 2550 PCL6 driver" download and view the description which includes instructions for updating the driver.

HP Color LaserJet 2550 PCL6 Plug and Play Bundle provides the following:

An installation program to assist with installation.
The print drivers are the same as those found on the version 2.0 CD.
Windows 98/ME: 4.24.2550.400
Windows 2000/XP/2003: 60.034.78.41
Plug and Play installable drivers for 1284.4 communication with the device.
Plug and Play installable PCL6 printer driver.
The product CD can be used at a later time to install additional product software, such as Toolbox.
A silent install is provided by running the program from a DOS prompt with the following command line parameters:
lj2550pcl6-en.exe -s -a -silent

This section will help you in the download of the software to your computer and start you on the install process.
Before proceeding with the software installation, the printer must first be properly set up, and your computer must be ready to print.
Close any screen savers, virus protection programs, or other software programs running on your computer.
Click on Download Now and a File Download box will appear.
Select Save This Program to Disk and a Save As box will appear.
Select a directory to save the file in and click Save.
Locate the file using Windows Explorer when the download has completed.
Double click on the file. This will extract all the driver files into a directory on your hard drive. The default directory is Program Files\Hewlett-Packard\Color LaserJet 2550 Drivers. However, you can change the path and directory name at the time of extracting the file.
Follow the instructions presented by the installation program. Do NOT attach the USB cable to the printer until prompted by the installation program.
Compañía
Hewlett Packard
Dispositivo
Impresoras y Plotters
Modelo
Hewlett Packard HP Color LaserJet 2550Ln
Descripción
Firmware Update utility
Sistema Operativo
Windows 98-Me-2000-XP
Idioma
English American
Versión Firmware
20040930
Tamaño
6.2Mb
Nombre del archivo
flash_5f2550_20040930_rev2.exe
Fecha
11 Oct 2004
Información
WARNING: Determine what the current firmware version of your printer is before downloading the update. If your printer already has the current version (20040930), downloading this file might cause possible performance issues. To determine the version of firmware of your HP Color LaserJet 2550 printer, print a Configuration Page by pressing the Go button (green) and the Cancel button (Red) on the printer's control panel. The firmware version is listed on the top left part of the page, under Product Information - Firmware Datecode.
Firmware Enhancements

These changes are implemented in the new version firmware 20040930:
Default screenmatch color treatment for non-driver PostScript jobs.
Enabled to set FONTSOURCE to a downloaded soft font via PJL.
Cyrillic/Greek/Hebrew font settings now available
Improved memory allocation for complex pages.
The default I/O timeout changed to 120 seconds.
Printing from Mac systems, and printing PDF files, will have an improved CMYK color adjustment.
Calibration will now occur on non-HP refilled cartridge that have the e-label set to "toner out".
Unexpected Paper Size messages are now bypassed by pressing Go or Cancel from the Toolbox utility.
The Supplies Status page will now include the part number for HP cartridges when recognizing a non-HP cartridge installed.
Monochrome print speed will increase by choosing "Print to Grayscale" in the driver's Color tab

Note: This utility is in English only.

* The HP Color LaserJet 2550 series Firmware Update Utility can be performed using either a Parallel or USB port.
When using the USB port, the HP Color LaserJet 2550 series software must be installed prior to using this utility.
When using the parallel port, the HP Color LaserJet 2550 series software does not need to be installed. Connect the 2550 series printer to a PC with the Firmware Update Utility loaded using a parallel cable.
* You will need 20MB of disk space to use the Firmware Update Utility.

* The HP Color LaserJet 2550 series printer must be in a READY state and remain powered on during the entire firmware update process.

* Administrator Privileges are required on the PC executing the utility.

* The control panel of the printer will display a series of flashing lights.

* After the Firmware Update Utility has finished, the HP Color LaserJet 2550 series printer will display a solid green Ready light (second from the bottom). Depending on the operating system on your PC, you may be prompted to reboot your computer.

This utility is for use on Windows 95, 98, ME, 2000 and XP. It can ONLY be used with parallel or USB connections.


Installation Instructions

* For users connected via the network, please temporarily disconnect your HP Color LaserJet 2550 series printer from the network to ensure the network devices to not interrupt the firmware upgrade process.

Parallel Cable connection
Connect a PC to the HP Color LaserJet 2550 series printer via a parallel cable.
You do not need to install the HP software for parallel upgrades.
If the "Add Hardware" wizard starts when you plug in the parallel cable, you can safely cancel it.
Double click the Flash Update utility.
Click 'OK' to begin the process. The utility will go through the following steps:
Close all toolbox and HP software running on the host PC.
Upload firmware to printer, at which point the printer lights will start flashing until complete.
Printer will then erase the old firmware and write the new firmware and reboot it.
Utility will prompt user to reboot PC (to synchronize the printer, restart Toolbox and the HP software)
DO NOT POWER CYCLE THE PRINTER during the upgrade process or it will leave your printer in an unusable state.
Once the utility is complete, it will prompt you to reboot your PC and printer to synchronize the printer and the HP Toolbox.
The firmware update can take up to 5 minutes to complete. Please be patient.
USB Connection
In order to use USB to update your printer, you must have the HP Color LaserJet 2550 series printer software installed on your PC.
You do NOT need to have toolbox installed. A driver only installation will work fine.
Ensure your HP Color LaserJet 2550 series printer is connected to the USB cable.
Double click the Flash Update utility.
Click 'OK' to begin the process. The utility will go through the following steps:
Close all Toolbox and HP software running on host PC.
Upload firmware to printer, at which point the printer lights will flash until complete.
Printer will then erase the old firmware and write the new firmware and reboot itself.
Utility will prompt user to reboot PC (to resync printer, restart toolbox and HP software)
DO NOT POWER CYCLE THE PRINTER during the upgrade process or it will leave your printer in an unusable state.
Once the utility is complete, it will prompt you to reboot your PC and printer to resync the printer and the HP Toolbox.
The firmware update can take up to 5 minutes to complete. Please be patient.
Compañía
Hewlett Packard
Dispositivo
Impresoras y Plotters
Modelo
Hewlett Packard HP Color LaserJet 2550Ln
Descripción
Mobile Printing for Notebooks
Sistema Operativo
Windows NT4
Idioma
English American
Versión Driver
2.10
Tamaño
3.5Mb
Nombre del archivo
mobileprinting4notebooksnt4-en.exe
Información
HP Mobile Printing for Notebooks (formally known as HP Mobile Printing Driver) is a software solution designed to facilitate printing from mobile notebook computers to network-connected Postscript-enabled HP printers.

As the notebook user moves around within the enterprise from floor to floor or from site to site, there is a need to print to networked printers that are encountered while away from the desk. HP Mobile Printing for Notebooks allows easy printing access to these newly encountered printers. There is no need to locate the printer driver or create a new network port. The user simply selects the HP Mobile Printing application, enters the network address (IP Address, hostname, or UNC pathname) of the target printer when prompted, and the print job is sent to the printer.

A Web JetAdmin plug-in has been developed to allow IT administrators to remotely enable display of the printer IP address on the printer control panel display. To download this plug-in, please visit the HP web jetadmin software and components download site.

If the printer IP address is not displayed, you may determine the IP address by printing a Configuration Page from the printer control panel menu.

Download and Installation

Note: Before proceeding with the software installation, be aware that administrator privileges are required to install the software and configure the printing system.

Close any screen savers, virus protection programs, or other software programs running on your computer.
Click on Download Now and a File Download box will appear.
Select Save This Program to Disk and a Save As box will appear.
Select a directory to save the file in and click Save.
Locate the file using Windows Explorer when the download has completed.
Double click on the file. This will begin the installation process. During the install, you may choose to make the HP Mobile Printing the default system printer on your computer.
When the installation is complete, a new system printer named HP Mobile Printing will be located in the Printers folder on your computer.
Compañía
Hewlett Packard
Dispositivo
Impresoras y Plotters
Modelo
Hewlett Packard HP Color LaserJet 2550Ln
Descripción
PCL6 Driver
Sistema Operativo
Windows NT4
Idioma
English American
Versión Driver
4.24.2550.400
Tamaño
2.9Mb
Nombre del archivo
clj2550pcl6winnt4-en.exe
Información
This section will help you in the download of the software to your computer and start you on the install process.
Before proceeding with the software installation, the printer must first be properly set up, and your computer must be ready to print.
Turn on the printer first, then turn on the computer.
Close any screen savers, virus protection programs, or other software programs running on your computer.
Click on Download Now and a File Download box will appear.
Select Save This Program to Disk and a Save As box will appear.
Select a directory to save the file in and click Save.
Locate the file using Windows Explorer when the download has completed.
Double click on the file. This will extract all the driver files into a directory on your hard drive. The directory these files are extracted to will have a similar name to the file that was downloaded (i.e., c:\clj2550pcl6). However, you can change the path and directory name at the time of extracting the file.
Open the Printers Window (Click Start-Settings-Printers).
Update the printer if it was previously installed
Right click on the printer and select Properties from the pop menu.
On the General tab, select New Driver.
Click on the Warning Box that pops up.
A printer listing box will appear. Select Have Disk.
Another box Install from Disk appears.
Click the Browse to locate the expanded files directory (i.e., c:\clj2550pcl6).
Click on the file ending with .inf .
Click Open and then OK and let files install.
Add the printer if it hasn't been installed yet.
Click Add New Printer
Follow the instructions of the Add Printer Wizard.
Compañía
Hewlett Packard
Dispositivo
Impresoras y Plotters
Modelo
Hewlett Packard HP Color LaserJet 2550Ln
Descripción
PostScript Driver
Sistema Operativo
Windows NT4
Idioma
English American
Versión Driver
034.4100
Tamaño
1Mb
Nombre del archivo
clj2550pswinnt4-en.exe
Información
This section will help you in the download of the software to your computer and start you on the install process.
Before proceeding with the software installation, the printer must first be properly set up, and your computer must be ready to print.
Turn on the printer first, then turn on the computer.
Close any screen savers, virus protection programs, or other software programs running on your computer.
Click on Download Now and a File Download box will appear.
Select Save This Program to Disk and a Save As box will appear.
Select a directory to save the file in and click Save.
Locate the file using Windows Explorer when the download has completed.
Double click on the file. This will extract all the driver files into a directory on your hard drive. The directory these files are extracted to will have a similar name to the file that was downloaded (i.e., c:\clj2550ps). However, you can change the path and directory name at the time of extracting the file.
Open the Printers Window (Click Start-Settings-Printers).
Update the printer if it was previously installed
Right click on the printer and select Properties from the pop menu.
On the General tab, select New Driver.
Click on the Warning Box that pops up.
A printer listing box will appear. Select Have Disk.
Another box Install from Disk appears.
Click the Browse to locate the expanded files directory (i.e., c:\clj2550ps).
Click on the file ending with .inf .
Click Open and then OK and let files install.
Add the printer if it hasn't been installed yet.
Click Add New Printer
Follow the instructions of the Add Printer Wizard.
Compañía
Hewlett Packard
Dispositivo
Impresoras y Plotters
Modelo
Hewlett Packard HP Color LaserJet 2550Ln
Descripción
Mobile Printing for Notebooks
Sistema Operativo
Windows NT4
Idioma
English International
Versión Driver
2.10
Tamaño
3.5Mb
Nombre del archivo
mobileprinting4notebooksnt4-ee.exe
Información
HP Mobile Printing for Notebooks (formally known as HP Mobile Printing Driver) is a software solution designed to facilitate printing from mobile notebook computers to network-connected Postscript-enabled HP printers.

As the notebook user moves around within the enterprise from floor to floor or from site to site, there is a need to print to networked printers that are encountered while away from the desk. HP Mobile Printing for Notebooks allows easy printing access to these newly encountered printers. There is no need to locate the printer driver or create a new network port. The user simply selects the HP Mobile Printing application, enters the network address (IP Address, hostname, or UNC pathname) of the target printer when prompted, and the print job is sent to the printer.

A Web JetAdmin plug-in has been developed to allow IT administrators to remotely enable display of the printer IP address on the printer control panel display. To download this plug-in, please visit the HP web jetadmin software and components download site.

If the printer IP address is not displayed, you may determine the IP address by printing a Configuration Page from the printer control panel menu.

Download and Installation

Note: Before proceeding with the software installation, be aware that administrator privileges are required to install the software and configure the printing system.

Close any screen savers, virus protection programs, or other software programs running on your computer.
Click on Download Now and a File Download box will appear.
Select Save This Program to Disk and a Save As box will appear.
Select a directory to save the file in and click Save.
Locate the file using Windows Explorer when the download has completed.
Double click on the file. This will begin the installation process. During the install, you may choose to make the HP Mobile Printing the default system printer on your computer.
When the installation is complete, a new system printer named HP Mobile Printing will be located in the Printers folder on your computer.
Compañía
Hewlett Packard
Dispositivo
Impresoras y Plotters
Modelo
Hewlett Packard HP Color LaserJet 2550Ln
Descripción
Printing software and utility
Sistema Operativo
Mac OS 9
Idioma
Finnish
Versión Utilities
4.1
Tamaño
4Mb
Nombre del archivo
clj2550mac9_x-fi.sit
Información
The HP LaserJet Installer provides HP LaserJet PostScript printing support for the Mac 9.1 and 9.2 operating systems.
Compañía
Hewlett Packard
Dispositivo
Impresoras y Plotters
Modelo
Hewlett Packard HP Color LaserJet 2550Ln
Descripción
Installer
Sistema Operativo
Mac OS 9
Idioma
Finnish
Versión Driver
4.1
Tamaño
4Mb
Nombre del archivo
clj2550installer-fi.sit
Información
HP Color LaserJet 2550 Installer for Mac OS 9.

Compañía
Hewlett Packard
Dispositivo
Impresoras y Plotters
Modelo
Hewlett Packard HP Color LaserJet 2550Ln
Descripción
Firmware Update utility
Sistema Operativo
Mac OS X
Idioma
Finnish
Versión Firmware
20040930
Tamaño
5.6Mb
Nombre del archivo
2550_fw_update20040930.dmg
Fecha
28 Jul 2005
Información
WARNING: Determine what the current firmware version of your printer is before downloading the update. If your printer already has the current version (20040930), downloading this file might cause possible performance issues. To determine the version of firmware of your HP Color LaserJet 2550 printer, print a Configuration Page by pressing the Go button (green) and the Cancel button (Red) on the printer's control panel. The firmware version is listed on the top left part of the page, under Product Information - Firmware Datecode.

Firmware Enhancements

These changes are implemented in the new version firmware 20040930:
Default screenmatch color treatment for non-driver PostScript jobs.
Enabled to set FONTSOURCE to a downloaded soft font via PJL.
Cyrillic/Greek/Hebrew font settings now available
Improved memory allocation for complex pages.
The default I/O timeout changed to 120 seconds.
Printing from Mac systems, and printing PDF files, will have an improved CMYK color adjustment.
Calibration will now occur on non-HP refilled cartridge that have the e-label set to "toner out".
Unexpected Paper Size messages are now bypassed by pressing Go or Cancel from the Toolbox utility.
The Supplies Status page will now include the part number for HP cartridges when recognizing a non-HP cartridge installed.
Monochrome print speed will increase by choosing "Print to Grayscale" in the driver's Color tab.

Note: This utility is in English only.

* You will need 20MB of disk space to use the Firmware Update Utility.

* The HP Color LaserJet 2550 series printer must be in a READY state and remain powered on during the entire firmware update process.

* The control panel of the printer will display a series of flashing lights.

* After the Firmware Update Utility has finished, the HP Color LaserJet 2550 series printer will display a solid green Ready light (second from the bottom). You may be prompted to reboot your computer.


Installation Instructions

(NOTE! If you use Internet Explorer to download the utility, it may strip the .dmg extension to the file. Simply re-add the .dmg extension and MAC OS X should recognize the file as a disk image)

This utility is for use on any OS X 10.2 or 10.3 Mac. It will NOT function in the MAC OS 9 environment.

It can only be used with a USB connection to the HP Color LaserJet 2550.

Instructions for upgrade

* For users connected via the network, please temporarily disconnect your HP Color LaserJet 2550 series printer from the network to ensure the network devices to not interrupt the FW upgrade process.
Mount the disk image containing the FW update.
Run the FW Update Application contained in the disk image.
Follow the onscreen prompts to continue.
When prompted, connect the printer via USB.
Upon finding an HP Color LaserJet 2550 series printer, the utility will prompt you to reboot the printer by simply turn the power off and back on. This ensures the printer is in a proper state to receive the update.
Once the printer has been rebooted, the utility will allow you to 'download' the firmware to the HP Color LaserJet 2550 series printer.
DO NOT POWER CYCLE THE PRINTER during the upgrade process or it will leave your printer in an unusable state.
One green LED will start flashing initially followed by 2 LED's flashing.
Once the LEDS stop flashing, the printer has updated and re-initialized, the firmware should be updated.
The firmware update can take up to 5 minutes to complete. Please be patient.
Compañía
Hewlett Packard
Dispositivo
Impresoras y Plotters
Modelo
Hewlett Packard HP Color LaserJet 2550Ln
Descripción
Installer Print Only Software Solution for v10.2 v10.3.x v10.4.x v10.5
Sistema Operativo
Mac OS X
Idioma
Finnish
Versión Driver
7.8.0.761
Tamaño
29.1Mb
Nombre del archivo
hp_laserjet_and_edgeline_print-only.dmg
Fecha
28 Jan 2008
Información
This download package contains HP LaserJet Mac OS X Installer Print Only Software Solution v7.8.0.761. Included are the HP Postscript PPD and PDE files for Mac OS X v10.2, v10.3.x, v10.4.x, v10.5 - PPC and Intel processor.
Supported Devices
HP color LaserJet 2500
HP color LaserJet 2550 series
HP color LaserJet 3700
HP color LaserJet 4600
HP color LaserJet 4650
HP color LaserJet 5500
HP Color LaserJet 5550
HP Color LaserJet 8500
HP Color LaserJet 8550
HP color LaserJet 9500
HP color LaserJet 9500 MFP
HP Color LaserJet
HP Color LaserJet 5/5M
HP Color LaserJet 4500
HP Color LaserJet 4550
HP LaserJet 1200
HP LaserJet 1300
HP LaserJet 1300n
HP LaserJet 1320 series
HP LaserJet 2100 Series
HP LaserJet 2200
HP LaserJet 4000 Series
HP LaserJet 4050 Series
HP LaserJet 4100 MFP
HP LaserJet 4100 Series
HP LaserJet 4200
HP LaserJet 4200L
HP LaserJet 4240
HP LaserJet 4240N
HP LaserJet 4250
HP LaserJet 4250L
HP LaserJet 4300
HP LaserJet 4350
HP LaserJet 4350L
HP LaserJet 4V
HP LaserJet 5000 Series
HP LaserJet 5100 Series
HP LaserJet 8000 Series
HP LaserJet 8100 Series
HP LaserJet 8150 Series
HP LaserJet 9000 MFP
HP LaserJet 9000L MFP
HP LaserJet 9000 Series
HP LaserJet 9040
HP LaserJet 9040 MFP
HP LaserJet 9050 MFP
HP LaserJet 9050
HP LaserJet 9055 mfp
HP LaserJet 9065 mfp
HP LaserJet 4 Plus
HP LaserJet 4ML
HP LaserJet 4MP
HP LaserJet 4Si
HP LaserJet 5M
HP LaserJet 5P
HP LaserJet 5Si
HP LaserJet 5Si Mopier
HP LaserJet 6P
HP Mopier 240
HP Mopier 320
HP LaserJet 1220
HP LaserJet 3015
HP LaserJet 3020
HP LaserJet 3030
HP LaserJet 3200
HP LaserJet 3300/3310/3320
HP LaserJet 3300
HP LaserJet 3380
HP business inkjet 2300
HP Business Inkjet 2600
HP Business Inkjet 2800
HP Business Inkjet 3000
HP officejet 9100 series
HP Business Inkjet 2250
HP Business Inkjet 2280
Compañía
Hewlett Packard
Dispositivo
Impresoras y Plotters
Modelo
Hewlett Packard HP Color LaserJet 2550Ln
Descripción
PCL6 Driver
Sistema Operativo
Windows 2000-2003-XP
Idioma
Finnish
Versión Driver
60.34.78.41
Tamaño
5.5Mb
Nombre del archivo
clj2550pcl6win2kxp2003-fi.exe
Información
Enhancements

Incorporated JPEG compression to reduce spool file size.
Resolves spoolsv.exe crash when printing some PowerPoint documents.
Control Panel simulator in the Services tab is now functional.

This section will help you in the download of the software to your computer and start you on the install process.
Before proceeding with the software installation, the printer must first be properly set up, and your computer must be ready to print.

DOWNLOAD AND EXTRACT THE SOFTWARE

Close any screen savers, virus protection programs, or other software programs running on your computer.
Click on Download Now and a File Download box will appear.
Select Save This Program to Disk and a Save As box will appear.
Select a directory to save the file in and click Save.
Locate the file using Windows Explorer when the download has completed.
Double click on the file. This will extract all the driver files into a directory on your hard drive. The directory these files are extracted to will have a similar name to the file that was downloaded (i.e., c:\clj2550pcl6). However, you can change the path and directory name at the time of extracting the file.
PLEASE USE THESE STEPS IF YOU ARE UPDATING THE HP COLOR LASERJET 2550 DRIVER
From the Windows XP desktop, click Start, and then Printers and Faxes (for Windows 2000, click Start, Settings and then Printers).
Right click on the hp color LaserJet 2550 PCL6 icon or listing, and then click Properties.
Click the Advanced tab.
Make certain the Driver box displays hp color LaserJet 2550 PCL6, and then click New Driver.
In the Add Printer Driver Wizard window, click Have Disk, and then Browse.
Browse to the directory that the downloaded files where unzipped to.

NOTE: The default directory would be C:\clj2550pcl6 (xx represents language, such as en for English)

The Look in box will display clj2550pcl6win2kxp2003-xx (xx represents language, such as en for English). Do not open any folders in this directory. The autorun.ini file should be in the File name box. Click Open.
On the Install From Disk window, click OK. The print driver name, hp color LaserJet 2550 PCL6, should be displayed. Click Next to continue.
When the update is finished, click OK to close the hp color LaserJet 2550 PCL6 Properties window. The update is now complete.
PLEASE USE THESE STEPS IF THIS IS A FIRST TIME INSTALLATION OF THE HP COLOR LASERJET 2550 DRIVER:
Attach a USB or parallel cable to the printer and the computer.
The "Found New Hardware Wizard" should appear. Note: If attaching via a parallel cable it may be necessary to restart the computer for the "Found New Hardware Wizard" to appear.
For Windows XP
Choose "Install from a list or specific location (advanced)" and then click Next.
Select only the box next to "Include this location in the search" (clear all other check boxes) then click the browse button to locate the directory where the driver was extracted to in the steps above. The directory these files are extracted to will have a similar name to the file that was downloaded (i.e., c:\clj2550pcl6).
Click once on the directory name to highlight it then choose OK. The directory path then appears in the dialog.
Select the Next button. Files will be copied to the appropriate directories automatically.
Click the Finish button within the "New Hardware Wizard"
After several moments and message will appear on the system tray (at the bottom right of the screen near the clock) indicating that "Your new hardware has been installed and is ready to use.

For Windows 2000
Click the Next button to continue.
Choose "Search for a suitable driver form my device (recommended)" and then click Next.
Select only the box next to "Specify a location" (clear all other check boxes) and click Next.
Click the browse button to locate the directory where the driver was extracted to in the steps above. The directory these files are extracted to will have a similar name to the file that was downloaded (i.e., c:\clj2550pcl6).
Click once on the directory name to highlight it and then select the Open button.
Autorun.inf should appear in the "file name" box. Click the Open button.
Select OK. The wizard will find the driver for the device.
Click the Next button.
Click Finish. Several dialogs will appear and then disappear.
The printer driver is now installed.
Compañía
Hewlett Packard
Dispositivo
Impresoras y Plotters
Modelo
Hewlett Packard HP Color LaserJet 2550Ln
Descripción
PostScript Driver
Sistema Operativo
Windows 2000-2003-XP
Idioma
Finnish
Versión Driver
60.34.78.41
Tamaño
5.3Mb
Nombre del archivo
clj2550pswin2kxp2003-fi.exe
Información
Enhancements

Incorporated JPEG compression to reduce spool file size.
Resolves spoolsv.exe crash when printing some PowerPoint documents.
Control Panel simulator in the Services tab is now functional.

This section will help you in the download of the software to your computer and start you on the install process.
Before proceeding with the software installation, the printer must first be properly set up, and your computer must be ready to print.

DOWNLOAD AND EXTRACT THE SOFTWARE

Close any screen savers, virus protection programs, or other software programs running on your computer.
Click on Download Now and a File Download box will appear.
Select Save This Program to Disk and a Save As box will appear.
Select a directory to save the file in and click Save.
Locate the file using Windows Explorer when the download has completed.
Double click on the file. This will extract all the driver files into a directory on your hard drive. The directory these files are extracted to will have a similar name to the file that was downloaded (i.e., c:\clj2550ps). However, you can change the path and directory name at the time of extracting the file.
PLEASE USE THESE STEPS IF YOU ARE UPDATING THE HP COLOR LASERJET 2550 DRIVER
From the Windows XP desktop, click Start, and then Printers and Faxes (for Windows 2000, click Start, Settings and then Printers).
Right click on the hp color LaserJet 2550 PostScript icon or listing, and then click Properties.
Click the Advanced tab.
Make certain the Driver box displays hp color LaserJet 2550 PostScript, and then click New Driver.
In the Add Printer Driver Wizard window, click Have Disk, and then Browse.
Browse to the directory that the downloaded files where unzipped to.

NOTE: The default directory would be c:\clj2550pswin2kxp2003-xx (xx represents language, such as en for English)

The Look in box will display clj2550pswin2kxp2003-xx (xx represents language, such as en for English). Do not open any folders in this directory. The autorun.ini file should be in the File name box. Click Open.
On the Install From Disk window, click OK. The print driver name, hp color LaserJet 2550 PostScript, should be displayed. Click Next to continue.
When the update is finished, click OK to close the hp color LaserJet 2550 PostScript Properties window. The update is now complete.
PLEASE USE THESE STEPS IF THIS IS A FIRST TIME INSTALLATION OF THE HP COLOR LASERJET 2550 DRIVER:
Attach a USB or parallel cable to the printer and the computer.
The "Found New Hardware Wizard" should appear. Note: If attaching via a parallel cable it may be necessary to restart the computer for the "Found New Hardware Wizard" to appear.
For Windows XP
Choose "Install from a list or specific location (advanced)" and then click Next.
Select only the box next to "Include this location in the search" (clear all other check boxes) then click the browse button to locate the directory where the driver was extracted to in the steps above. The directory these files are extracted to will have a similar name to the file that was downloaded (i.e., c:\clj2550ps).
Click once on the directory name to highlight it then choose OK. The directory path then appears in the dialog.
Select the Next button. Files will be copied to the appropriate directories automatically.
Click the Finish button within the "New Hardware Wizard"
After several moments and message will appear on the system tray (at the bottom right of the screen near the clock) indicating that "Your new hardware has been installed and is ready to use.

For Windows 2000
Click the Next button to continue.
Choose "Search for a suitable driver form my device (recommended)" and then click Next.
Select only the box next to "Specify a location" (clear all other check boxes) and click Next.
Click the browse button to locate the directory where the driver was extracted to in the steps above. The directory these files are extracted to will have a similar name to the file that was downloaded (i.e., c:\clj2550ps).
Click once on the directory name to highlight it and then select the Open button.
Autorun.inf should appear in the "file name" box. Click the Open button.
Select OK. The wizard will find the driver for the device.
Click the Next button.
Click Finish. Several dialogs will appear and then disappear.
The printer driver is now installed.
Compañía
Hewlett Packard
Dispositivo
Impresoras y Plotters
Modelo
Hewlett Packard HP Color LaserJet 2550Ln
Descripción
PCL6 Driver
Sistema Operativo
Windows 2000-2003-XP-Vista
Idioma
Finnish
Versión Driver
4.5
Tamaño
18Mb
Nombre del archivo
hpupd45pcl632.exe
Fecha
1 Apr 2008
Información
The UPD version 4.5 is the latest version of HP's Universal Print Driver. Please review the entire documentation for information on issues resolved, performance improvements, and new behavior changes to the UPD.
Compañía
Hewlett Packard
Dispositivo
Impresoras y Plotters
Modelo
Hewlett Packard HP Color LaserJet 2550Ln
Descripción
Universal Print Driver PCL 5
Sistema Operativo
Windows 2000-2003-XP-Vista
Idioma
Finnish
Versión Driver
4.5
Tamaño
17.8Mb
Nombre del archivo
hpupd45pcl532.exe
Fecha
1 Apr 2008
Información
The UPD version 4.5 is the latest version of HP's Universal Print Driver. Please review the entire documentation for information on issues resolved, performance improvements, and new behavior changes to the UPD.
Compañía
Hewlett Packard
Dispositivo
Impresoras y Plotters
Modelo
Hewlett Packard HP Color LaserJet 2550Ln
Descripción
Universal Print Driver PostScript
Sistema Operativo
Windows 2000-2003-XP-Vista
Idioma
Finnish
Versión Driver
4.5
Tamaño
18.6Mb
Nombre del archivo
hpupd45ps32.exe
Fecha
1 Apr 2008
Información
The UPD version 4.5 is the latest version of HP's Universal Print Driver. Please review the entire documentation for information on issues resolved, performance improvements, and new behavior changes to the UPD.
Compañía
Hewlett Packard
Dispositivo
Impresoras y Plotters
Modelo
Hewlett Packard HP Color LaserJet 2550Ln
Descripción
PCL5 Driver
Sistema Operativo
Windows 2003 64 bits-XP 64 bits-Vista 64 bits
Idioma
Finnish
Versión Driver
4.5
Tamaño
18.2Mb
Nombre del archivo
hpupd45pcl564.exe
Fecha
1 Apr 2008
Información
The UPD version 4.5 is the latest version of HP's Universal Print Driver. Please review the entire documentation for information on issues resolved, performance improvements, and new behavior changes to the UPD.
Compañía
Hewlett Packard
Dispositivo
Impresoras y Plotters
Modelo
Hewlett Packard HP Color LaserJet 2550Ln
Descripción
Universal Print Driver x64 PostScript
Sistema Operativo
Windows 2003 64 bits-XP 64 bits-Vista 64 bits
Idioma
Finnish
Versión Driver
4.5
Tamaño
19Mb
Nombre del archivo
hpupd45ps64.exe
Fecha
1 Apr 2008
Información
The UPD version 4.5 is the latest version of HP's Universal Print Driver. Please review the entire documentation for information on issues resolved, performance improvements, and new behavior changes to the UPD.
Compañía
Hewlett Packard
Dispositivo
Impresoras y Plotters
Modelo
Hewlett Packard HP Color LaserJet 2550Ln
Descripción
PCL6 Driver
Sistema Operativo
Windows 2003 64 bits-XP 64 bits-Vista 64 bits
Idioma
Finnish
Versión Driver
4.5
Tamaño
18.2Mb
Nombre del archivo
hpupd45pcl664.exe
Fecha
1 Apr 2008
Información
The UPD version 4.5 is the latest version of HP's Universal Print Driver. Please review the entire documentation for information on issues resolved, performance improvements, and new behavior changes to the UPD.
Compañía
Hewlett Packard
Dispositivo
Impresoras y Plotters
Modelo
Hewlett Packard HP Color LaserJet 2550Ln
Descripción
PCL6 Plug and Play Bundle
Sistema Operativo
Windows 98-Me-2000-2003-XP
Idioma
Finnish
Versión Driver
2.0
Tamaño
11.6Mb
Nombre del archivo
clj2550pcl6-fi.exe
Información
Use this software for first time USB installations only. Do NOT attach USB cable until prompted by the installation program

If upgrading a previous installation please use the "HP Color LaserJet 2550 PCL6 driver" download and view the description which includes instructions for updating the driver.

HP Color LaserJet 2550 PCL6 Plug and Play Bundle provides the following:

An installation program to assist with installation.
The print drivers are the same as those found on the version 2.0 CD.
Windows 98/ME: 4.24.2550.400
Windows 2000/XP/2003: 60.034.78.41
Plug and Play installable drivers for 1284.4 communication with the device.
Plug and Play installable PCL6 printer driver.
The product CD can be used at a later time to install additional product software, such as Toolbox.
A silent install is provided by running the program from a DOS prompt with the following command line parameters:
lj2550pcl6-en.exe -s -a -silent

This section will help you in the download of the software to your computer and start you on the install process.
Before proceeding with the software installation, the printer must first be properly set up, and your computer must be ready to print.
Close any screen savers, virus protection programs, or other software programs running on your computer.
Click on Download Now and a File Download box will appear.
Select Save This Program to Disk and a Save As box will appear.
Select a directory to save the file in and click Save.
Locate the file using Windows Explorer when the download has completed.
Double click on the file. This will extract all the driver files into a directory on your hard drive. The default directory is Program Files\Hewlett-Packard\Color LaserJet 2550 Drivers. However, you can change the path and directory name at the time of extracting the file.
Follow the instructions presented by the installation program. Do NOT attach the USB cable to the printer until prompted by the installation program.
Compañía
Hewlett Packard
Dispositivo
Impresoras y Plotters
Modelo
Hewlett Packard HP Color LaserJet 2550Ln
Descripción
Firmware Update utility
Sistema Operativo
Windows 98-Me-2000-XP
Idioma
Finnish
Versión Firmware
20040930
Tamaño
6.2Mb
Nombre del archivo
flash_5f2550_20040930_rev2.exe
Fecha
11 Oct 2004
Información
WARNING: Determine what the current firmware version of your printer is before downloading the update. If your printer already has the current version (20040930), downloading this file might cause possible performance issues. To determine the version of firmware of your HP Color LaserJet 2550 printer, print a Configuration Page by pressing the Go button (green) and the Cancel button (Red) on the printer's control panel. The firmware version is listed on the top left part of the page, under Product Information - Firmware Datecode.
Firmware Enhancements

These changes are implemented in the new version firmware 20040930:
Default screenmatch color treatment for non-driver PostScript jobs.
Enabled to set FONTSOURCE to a downloaded soft font via PJL.
Cyrillic/Greek/Hebrew font settings now available
Improved memory allocation for complex pages.
The default I/O timeout changed to 120 seconds.
Printing from Mac systems, and printing PDF files, will have an improved CMYK color adjustment.
Calibration will now occur on non-HP refilled cartridge that have the e-label set to "toner out".
Unexpected Paper Size messages are now bypassed by pressing Go or Cancel from the Toolbox utility.
The Supplies Status page will now include the part number for HP cartridges when recognizing a non-HP cartridge installed.
Monochrome print speed will increase by choosing "Print to Grayscale" in the driver's Color tab

Note: This utility is in English only.

* The HP Color LaserJet 2550 series Firmware Update Utility can be performed using either a Parallel or USB port.
When using the USB port, the HP Color LaserJet 2550 series software must be installed prior to using this utility.
When using the parallel port, the HP Color LaserJet 2550 series software does not need to be installed. Connect the 2550 series printer to a PC with the Firmware Update Utility loaded using a parallel cable.
* You will need 20MB of disk space to use the Firmware Update Utility.

* The HP Color LaserJet 2550 series printer must be in a READY state and remain powered on during the entire firmware update process.

* Administrator Privileges are required on the PC executing the utility.

* The control panel of the printer will display a series of flashing lights.

* After the Firmware Update Utility has finished, the HP Color LaserJet 2550 series printer will display a solid green Ready light (second from the bottom). Depending on the operating system on your PC, you may be prompted to reboot your computer.

This utility is for use on Windows 95, 98, ME, 2000 and XP. It can ONLY be used with parallel or USB connections.


Installation Instructions

* For users connected via the network, please temporarily disconnect your HP Color LaserJet 2550 series printer from the network to ensure the network devices to not interrupt the firmware upgrade process.

Parallel Cable connection
Connect a PC to the HP Color LaserJet 2550 series printer via a parallel cable.
You do not need to install the HP software for parallel upgrades.
If the "Add Hardware" wizard starts when you plug in the parallel cable, you can safely cancel it.
Double click the Flash Update utility.
Click 'OK' to begin the process. The utility will go through the following steps:
Close all toolbox and HP software running on the host PC.
Upload firmware to printer, at which point the printer lights will start flashing until complete.
Printer will then erase the old firmware and write the new firmware and reboot it.
Utility will prompt user to reboot PC (to synchronize the printer, restart Toolbox and the HP software)
DO NOT POWER CYCLE THE PRINTER during the upgrade process or it will leave your printer in an unusable state.
Once the utility is complete, it will prompt you to reboot your PC and printer to synchronize the printer and the HP Toolbox.
The firmware update can take up to 5 minutes to complete. Please be patient.
USB Connection
In order to use USB to update your printer, you must have the HP Color LaserJet 2550 series printer software installed on your PC.
You do NOT need to have toolbox installed. A driver only installation will work fine.
Ensure your HP Color LaserJet 2550 series printer is connected to the USB cable.
Double click the Flash Update utility.
Click 'OK' to begin the process. The utility will go through the following steps:
Close all Toolbox and HP software running on host PC.
Upload firmware to printer, at which point the printer lights will flash until complete.
Printer will then erase the old firmware and write the new firmware and reboot itself.
Utility will prompt user to reboot PC (to resync printer, restart toolbox and HP software)
DO NOT POWER CYCLE THE PRINTER during the upgrade process or it will leave your printer in an unusable state.
Once the utility is complete, it will prompt you to reboot your PC and printer to resync the printer and the HP Toolbox.
The firmware update can take up to 5 minutes to complete. Please be patient.
Compañía
Hewlett Packard
Dispositivo
Impresoras y Plotters
Modelo
Hewlett Packard HP Color LaserJet 2550Ln
Descripción
PCL6 Driver
Sistema Operativo
Windows NT4
Idioma
Finnish
Versión Driver
4.24.2550.400
Tamaño
2.9Mb
Nombre del archivo
clj2550pcl6winnt4-fi.exe
Información
This section will help you in the download of the software to your computer and start you on the install process.
Before proceeding with the software installation, the printer must first be properly set up, and your computer must be ready to print.
Turn on the printer first, then turn on the computer.
Close any screen savers, virus protection programs, or other software programs running on your computer.
Click on Download Now and a File Download box will appear.
Select Save This Program to Disk and a Save As box will appear.
Select a directory to save the file in and click Save.
Locate the file using Windows Explorer when the download has completed.
Double click on the file. This will extract all the driver files into a directory on your hard drive. The directory these files are extracted to will have a similar name to the file that was downloaded (i.e., c:\clj2550pcl6). However, you can change the path and directory name at the time of extracting the file.
Open the Printers Window (Click Start-Settings-Printers).
Update the printer if it was previously installed
Right click on the printer and select Properties from the pop menu.
On the General tab, select New Driver.
Click on the Warning Box that pops up.
A printer listing box will appear. Select Have Disk.
Another box Install from Disk appears.
Click the Browse to locate the expanded files directory (i.e., c:\clj2550pcl6).
Click on the file ending with .inf .
Click Open and then OK and let files install.
Add the printer if it hasn't been installed yet.
Click Add New Printer
Follow the instructions of the Add Printer Wizard.
Compañía
Hewlett Packard
Dispositivo
Impresoras y Plotters
Modelo
Hewlett Packard HP Color LaserJet 2550Ln
Descripción
PostScript Driver
Sistema Operativo
Windows NT4
Idioma
Finnish
Versión Driver
034.4100
Tamaño
1Mb
Nombre del archivo
clj2550pswinnt4-fi.exe
Información
This section will help you in the download of the software to your computer and start you on the install process.
Before proceeding with the software installation, the printer must first be properly set up, and your computer must be ready to print.
Turn on the printer first, then turn on the computer.
Close any screen savers, virus protection programs, or other software programs running on your computer.
Click on Download Now and a File Download box will appear.
Select Save This Program to Disk and a Save As box will appear.
Select a directory to save the file in and click Save.
Locate the file using Windows Explorer when the download has completed.
Double click on the file. This will extract all the driver files into a directory on your hard drive. The directory these files are extracted to will have a similar name to the file that was downloaded (i.e., c:\clj2550ps). However, you can change the path and directory name at the time of extracting the file.
Open the Printers Window (Click Start-Settings-Printers).
Update the printer if it was previously installed
Right click on the printer and select Properties from the pop menu.
On the General tab, select New Driver.
Click on the Warning Box that pops up.
A printer listing box will appear. Select Have Disk.
Another box Install from Disk appears.
Click the Browse to locate the expanded files directory (i.e., c:\clj2550ps).
Click on the file ending with .inf .
Click Open and then OK and let files install.
Add the printer if it hasn't been installed yet.
Click Add New Printer
Follow the instructions of the Add Printer Wizard.
Compañía
Hewlett Packard
Dispositivo
Impresoras y Plotters
Modelo
Hewlett Packard HP Color LaserJet 2550Ln
Descripción
Removal Tool
Sistema Operativo
Windows NT4-2000-XP
Idioma
Finnish
Versión Driver
1.0.0.1
Tamaño
316Kb
Nombre del archivo
setconfig_exermtool.exe
Fecha
3 Jun 2005
Información
Download Info
If the following error message is encountered, please install this file for resolution.

This error message may occur with the following Hewlett-Packard LaserJet devices:
LaserJet 1010/1012/1015 Series
LaserJet 1150
LaserJet 1160
LaserJet 1300 Series
LaserJet 1320 Series
LaserJet 3015/3020/3030/3380 Series
Color LaserJet 2550
Note: If the error is encountered, it will be after the initial printer software install and upon consequential system reboots.

This section will help you in the download of the software to your computer and start you on the install process.
Close any screen savers, virus protection programs, or other software programs running on your computer.
Click on Download and a File Download box will appear.
Select Save This Program to Disk and a Save As box will appear.
Select a directory to save the file in and click Save.
Locate the file using Windows Explorer when the download has completed.
Double click on the file. It will execute and install the necessary files.




Compañía
Hewlett Packard
Dispositivo
Impresoras y Plotters
Modelo
Hewlett Packard HP Color LaserJet 2550Ln
Descripción
Printing software and utility
Sistema Operativo
Mac OS 9
Idioma
French
Versión Utilities
4.1
Tamaño
4Mb
Nombre del archivo
clj2550mac9_x-fr.sit
Información
The HP LaserJet Installer provides HP LaserJet PostScript printing support for the Mac 9.1 and 9.2 operating systems.
Compañía
Hewlett Packard
Dispositivo
Impresoras y Plotters
Modelo
Hewlett Packard HP Color LaserJet 2550Ln
Descripción
Installer
Sistema Operativo
Mac OS 9
Idioma
French
Versión Driver
4.1
Tamaño
4Mb
Nombre del archivo
clj2550installer-fr.sit
Información
HP Color LaserJet 2550 Installer for Mac OS 9.

Compañía
Hewlett Packard
Dispositivo
Impresoras y Plotters
Modelo
Hewlett Packard HP Color LaserJet 2550Ln
Descripción
Installer Print Only Software Solution for v10.2 v10.3.x v10.4.x v10.5
Sistema Operativo
Mac OS X
Idioma
French
Versión Driver
7.8.0.761
Tamaño
29.1Mb
Nombre del archivo
hp_laserjet_and_edgeline_print-only.dmg
Fecha
28 Jan 2008
Información
This download package contains HP LaserJet Mac OS X Installer Print Only Software Solution v7.8.0.761. Included are the HP Postscript PPD and PDE files for Mac OS X v10.2, v10.3.x, v10.4.x, v10.5 - PPC and Intel processor.
Supported Devices
HP color LaserJet 2500
HP color LaserJet 2550 series
HP color LaserJet 3700
HP color LaserJet 4600
HP color LaserJet 4650
HP color LaserJet 5500
HP Color LaserJet 5550
HP Color LaserJet 8500
HP Color LaserJet 8550
HP color LaserJet 9500
HP color LaserJet 9500 MFP
HP Color LaserJet
HP Color LaserJet 5/5M
HP Color LaserJet 4500
HP Color LaserJet 4550
HP LaserJet 1200
HP LaserJet 1300
HP LaserJet 1300n
HP LaserJet 1320 series
HP LaserJet 2100 Series
HP LaserJet 2200
HP LaserJet 4000 Series
HP LaserJet 4050 Series
HP LaserJet 4100 MFP
HP LaserJet 4100 Series
HP LaserJet 4200
HP LaserJet 4200L
HP LaserJet 4240
HP LaserJet 4240N
HP LaserJet 4250
HP LaserJet 4250L
HP LaserJet 4300
HP LaserJet 4350
HP LaserJet 4350L
HP LaserJet 4V
HP LaserJet 5000 Series
HP LaserJet 5100 Series
HP LaserJet 8000 Series
HP LaserJet 8100 Series
HP LaserJet 8150 Series
HP LaserJet 9000 MFP
HP LaserJet 9000L MFP
HP LaserJet 9000 Series
HP LaserJet 9040
HP LaserJet 9040 MFP
HP LaserJet 9050 MFP
HP LaserJet 9050
HP LaserJet 9055 mfp
HP LaserJet 9065 mfp
HP LaserJet 4 Plus
HP LaserJet 4ML
HP LaserJet 4MP
HP LaserJet 4Si
HP LaserJet 5M
HP LaserJet 5P
HP LaserJet 5Si
HP LaserJet 5Si Mopier
HP LaserJet 6P
HP Mopier 240
HP Mopier 320
HP LaserJet 1220
HP LaserJet 3015
HP LaserJet 3020
HP LaserJet 3030
HP LaserJet 3200
HP LaserJet 3300/3310/3320
HP LaserJet 3300
HP LaserJet 3380
HP business inkjet 2300
HP Business Inkjet 2600
HP Business Inkjet 2800
HP Business Inkjet 3000
HP officejet 9100 series
HP Business Inkjet 2250
HP Business Inkjet 2280
Compañía
Hewlett Packard
Dispositivo
Impresoras y Plotters
Modelo
Hewlett Packard HP Color LaserJet 2550Ln
Descripción
Firmware Update utility
Sistema Operativo
Mac OS X
Idioma
French
Versión Firmware
20040930
Tamaño
5.6Mb
Nombre del archivo
2550_fw_update20040930.dmg
Fecha
28 Jul 2005
Información
WARNING: Determine what the current firmware version of your printer is before downloading the update. If your printer already has the current version (20040930), downloading this file might cause possible performance issues. To determine the version of firmware of your HP Color LaserJet 2550 printer, print a Configuration Page by pressing the Go button (green) and the Cancel button (Red) on the printer's control panel. The firmware version is listed on the top left part of the page, under Product Information - Firmware Datecode.

Firmware Enhancements

These changes are implemented in the new version firmware 20040930:
Default screenmatch color treatment for non-driver PostScript jobs.
Enabled to set FONTSOURCE to a downloaded soft font via PJL.
Cyrillic/Greek/Hebrew font settings now available
Improved memory allocation for complex pages.
The default I/O timeout changed to 120 seconds.
Printing from Mac systems, and printing PDF files, will have an improved CMYK color adjustment.
Calibration will now occur on non-HP refilled cartridge that have the e-label set to "toner out".
Unexpected Paper Size messages are now bypassed by pressing Go or Cancel from the Toolbox utility.
The Supplies Status page will now include the part number for HP cartridges when recognizing a non-HP cartridge installed.
Monochrome print speed will increase by choosing "Print to Grayscale" in the driver's Color tab.

Note: This utility is in English only.

* You will need 20MB of disk space to use the Firmware Update Utility.

* The HP Color LaserJet 2550 series printer must be in a READY state and remain powered on during the entire firmware update process.

* The control panel of the printer will display a series of flashing lights.

* After the Firmware Update Utility has finished, the HP Color LaserJet 2550 series printer will display a solid green Ready light (second from the bottom). You may be prompted to reboot your computer.


Installation Instructions

(NOTE! If you use Internet Explorer to download the utility, it may strip the .dmg extension to the file. Simply re-add the .dmg extension and MAC OS X should recognize the file as a disk image)

This utility is for use on any OS X 10.2 or 10.3 Mac. It will NOT function in the MAC OS 9 environment.

It can only be used with a USB connection to the HP Color LaserJet 2550.

Instructions for upgrade

* For users connected via the network, please temporarily disconnect your HP Color LaserJet 2550 series printer from the network to ensure the network devices to not interrupt the FW upgrade process.
Mount the disk image containing the FW update.
Run the FW Update Application contained in the disk image.
Follow the onscreen prompts to continue.
When prompted, connect the printer via USB.
Upon finding an HP Color LaserJet 2550 series printer, the utility will prompt you to reboot the printer by simply turn the power off and back on. This ensures the printer is in a proper state to receive the update.
Once the printer has been rebooted, the utility will allow you to 'download' the firmware to the HP Color LaserJet 2550 series printer.
DO NOT POWER CYCLE THE PRINTER during the upgrade process or it will leave your printer in an unusable state.
One green LED will start flashing initially followed by 2 LED's flashing.
Once the LEDS stop flashing, the printer has updated and re-initialized, the firmware should be updated.
The firmware update can take up to 5 minutes to complete. Please be patient.
Compañía
Hewlett Packard
Dispositivo
Impresoras y Plotters
Modelo
Hewlett Packard HP Color LaserJet 2550Ln
Descripción
PCL6 Driver
Sistema Operativo
Windows 2000-2003-XP
Idioma
French
Versión Driver
60.34.78.41
Tamaño
5.5Mb
Nombre del archivo
clj2550plc6win2kxp2003-fr.exe
Información
Enhancements

Incorporated JPEG compression to reduce spool file size.
Resolves spoolsv.exe crash when printing some PowerPoint documents.
Control Panel simulator in the Services tab is now functional.

This section will help you in the download of the software to your computer and start you on the install process.
Before proceeding with the software installation, the printer must first be properly set up, and your computer must be ready to print.

DOWNLOAD AND EXTRACT THE SOFTWARE

Close any screen savers, virus protection programs, or other software programs running on your computer.
Click on Download Now and a File Download box will appear.
Select Save This Program to Disk and a Save As box will appear.
Select a directory to save the file in and click Save.
Locate the file using Windows Explorer when the download has completed.
Double click on the file. This will extract all the driver files into a directory on your hard drive. The directory these files are extracted to will have a similar name to the file that was downloaded (i.e., c:\clj2550pcl6). However, you can change the path and directory name at the time of extracting the file.
PLEASE USE THESE STEPS IF YOU ARE UPDATING THE HP COLOR LASERJET 2550 DRIVER
From the Windows XP desktop, click Start, and then Printers and Faxes (for Windows 2000, click Start, Settings and then Printers).
Right click on the hp color LaserJet 2550 PCL6 icon or listing, and then click Properties.
Click the Advanced tab.
Make certain the Driver box displays hp color LaserJet 2550 PCL6, and then click New Driver.
In the Add Printer Driver Wizard window, click Have Disk, and then Browse.
Browse to the directory that the downloaded files where unzipped to.

NOTE: The default directory would be C:\clj2550pcl6 (xx represents language, such as en for English)

The Look in box will display clj2550pcl6win2kxp2003-xx (xx represents language, such as en for English). Do not open any folders in this directory. The autorun.ini file should be in the File name box. Click Open.
On the Install From Disk window, click OK. The print driver name, hp color LaserJet 2550 PCL6, should be displayed. Click Next to continue.
When the update is finished, click OK to close the hp color LaserJet 2550 PCL6 Properties window. The update is now complete.
PLEASE USE THESE STEPS IF THIS IS A FIRST TIME INSTALLATION OF THE HP COLOR LASERJET 2550 DRIVER:
Attach a USB or parallel cable to the printer and the computer.
The "Found New Hardware Wizard" should appear. Note: If attaching via a parallel cable it may be necessary to restart the computer for the "Found New Hardware Wizard" to appear.
For Windows XP
Choose "Install from a list or specific location (advanced)" and then click Next.
Select only the box next to "Include this location in the search" (clear all other check boxes) then click the browse button to locate the directory where the driver was extracted to in the steps above. The directory these files are extracted to will have a similar name to the file that was downloaded (i.e., c:\clj2550pcl6).
Click once on the directory name to highlight it then choose OK. The directory path then appears in the dialog.
Select the Next button. Files will be copied to the appropriate directories automatically.
Click the Finish button within the "New Hardware Wizard"
After several moments and message will appear on the system tray (at the bottom right of the screen near the clock) indicating that "Your new hardware has been installed and is ready to use.

For Windows 2000
Click the Next button to continue.
Choose "Search for a suitable driver form my device (recommended)" and then click Next.
Select only the box next to "Specify a location" (clear all other check boxes) and click Next.
Click the browse button to locate the directory where the driver was extracted to in the steps above. The directory these files are extracted to will have a similar name to the file that was downloaded (i.e., c:\clj2550pcl6).
Click once on the directory name to highlight it and then select the Open button.
Autorun.inf should appear in the "file name" box. Click the Open button.
Select OK. The wizard will find the driver for the device.
Click the Next button.
Click Finish. Several dialogs will appear and then disappear.
The printer driver is now installed.
Compañía
Hewlett Packard
Dispositivo
Impresoras y Plotters
Modelo
Hewlett Packard HP Color LaserJet 2550Ln
Descripción
PostScript Driver
Sistema Operativo
Windows 2000-2003-XP
Idioma
French
Versión Driver
60.34.78.41
Tamaño
5.3Mb
Nombre del archivo
clj2550pswin2kxp2003-fr.exe
Información
Enhancements

Incorporated JPEG compression to reduce spool file size.
Resolves spoolsv.exe crash when printing some PowerPoint documents.
Control Panel simulator in the Services tab is now functional.

This section will help you in the download of the software to your computer and start you on the install process.
Before proceeding with the software installation, the printer must first be properly set up, and your computer must be ready to print.

DOWNLOAD AND EXTRACT THE SOFTWARE

Close any screen savers, virus protection programs, or other software programs running on your computer.
Click on Download Now and a File Download box will appear.
Select Save This Program to Disk and a Save As box will appear.
Select a directory to save the file in and click Save.
Locate the file using Windows Explorer when the download has completed.
Double click on the file. This will extract all the driver files into a directory on your hard drive. The directory these files are extracted to will have a similar name to the file that was downloaded (i.e., c:\clj2550ps). However, you can change the path and directory name at the time of extracting the file.
PLEASE USE THESE STEPS IF YOU ARE UPDATING THE HP COLOR LASERJET 2550 DRIVER
From the Windows XP desktop, click Start, and then Printers and Faxes (for Windows 2000, click Start, Settings and then Printers).
Right click on the hp color LaserJet 2550 PostScript icon or listing, and then click Properties.
Click the Advanced tab.
Make certain the Driver box displays hp color LaserJet 2550 PostScript, and then click New Driver.
In the Add Printer Driver Wizard window, click Have Disk, and then Browse.
Browse to the directory that the downloaded files where unzipped to.

NOTE: The default directory would be c:\clj2550pswin2kxp2003-xx (xx represents language, such as en for English)

The Look in box will display clj2550pswin2kxp2003-xx (xx represents language, such as en for English). Do not open any folders in this directory. The autorun.ini file should be in the File name box. Click Open.
On the Install From Disk window, click OK. The print driver name, hp color LaserJet 2550 PostScript, should be displayed. Click Next to continue.
When the update is finished, click OK to close the hp color LaserJet 2550 PostScript Properties window. The update is now complete.
PLEASE USE THESE STEPS IF THIS IS A FIRST TIME INSTALLATION OF THE HP COLOR LASERJET 2550 DRIVER:
Attach a USB or parallel cable to the printer and the computer.
The "Found New Hardware Wizard" should appear. Note: If attaching via a parallel cable it may be necessary to restart the computer for the "Found New Hardware Wizard" to appear.
For Windows XP
Choose "Install from a list or specific location (advanced)" and then click Next.
Select only the box next to "Include this location in the search" (clear all other check boxes) then click the browse button to locate the directory where the driver was extracted to in the steps above. The directory these files are extracted to will have a similar name to the file that was downloaded (i.e., c:\clj2550ps).
Click once on the directory name to highlight it then choose OK. The directory path then appears in the dialog.
Select the Next button. Files will be copied to the appropriate directories automatically.
Click the Finish button within the "New Hardware Wizard"
After several moments and message will appear on the system tray (at the bottom right of the screen near the clock) indicating that "Your new hardware has been installed and is ready to use.

For Windows 2000
Click the Next button to continue.
Choose "Search for a suitable driver form my device (recommended)" and then click Next.
Select only the box next to "Specify a location" (clear all other check boxes) and click Next.
Click the browse button to locate the directory where the driver was extracted to in the steps above. The directory these files are extracted to will have a similar name to the file that was downloaded (i.e., c:\clj2550ps).
Click once on the directory name to highlight it and then select the Open button.
Autorun.inf should appear in the "file name" box. Click the Open button.
Select OK. The wizard will find the driver for the device.
Click the Next button.
Click Finish. Several dialogs will appear and then disappear.
The printer driver is now installed.
Compañía
Hewlett Packard
Dispositivo
Impresoras y Plotters
Modelo
Hewlett Packard HP Color LaserJet 2550Ln
Descripción
Universal Print Driver PostScript
Sistema Operativo
Windows 2000-2003-XP-Vista
Idioma
French
Versión Driver
4.5
Tamaño
18.6Mb
Nombre del archivo
hpupd45ps32.exe
Fecha
1 Apr 2008
Información
The UPD version 4.5 is the latest version of HP's Universal Print Driver. Please review the entire documentation for information on issues resolved, performance improvements, and new behavior changes to the UPD.
Compañía
Hewlett Packard
Dispositivo
Impresoras y Plotters
Modelo
Hewlett Packard HP Color LaserJet 2550Ln
Descripción
Universal Print Driver PCL 5
Sistema Operativo
Windows 2000-2003-XP-Vista
Idioma
French
Versión Driver
4.5
Tamaño
17.8Mb
Nombre del archivo
hpupd45pcl532.exe
Fecha
1 Apr 2008
Información
The UPD version 4.5 is the latest version of HP's Universal Print Driver. Please review the entire documentation for information on issues resolved, performance improvements, and new behavior changes to the UPD.
Compañía
Hewlett Packard
Dispositivo
Impresoras y Plotters
Modelo
Hewlett Packard HP Color LaserJet 2550Ln
Descripción
PCL6 Driver
Sistema Operativo
Windows 2000-2003-XP-Vista
Idioma
French
Versión Driver
4.5
Tamaño
18Mb
Nombre del archivo
hpupd45pcl632.exe
Fecha
1 Apr 2008
Información
The UPD version 4.5 is the latest version of HP's Universal Print Driver. Please review the entire documentation for information on issues resolved, performance improvements, and new behavior changes to the UPD.
Compañía
Hewlett Packard
Dispositivo
Impresoras y Plotters
Modelo
Hewlett Packard HP Color LaserJet 2550Ln
Descripción
PCL6 Driver
Sistema Operativo
Windows 2003 64 bits-XP 64 bits-Vista 64 bits
Idioma
French
Versión Driver
4.5
Tamaño
18.2Mb
Nombre del archivo
hpupd45pcl664.exe
Fecha
1 Apr 2008
Información
The UPD version 4.5 is the latest version of HP's Universal Print Driver. Please review the entire documentation for information on issues resolved, performance improvements, and new behavior changes to the UPD.
Compañía
Hewlett Packard
Dispositivo
Impresoras y Plotters
Modelo
Hewlett Packard HP Color LaserJet 2550Ln
Descripción
PCL5 Driver
Sistema Operativo
Windows 2003 64 bits-XP 64 bits-Vista 64 bits
Idioma
French
Versión Driver
4.5
Tamaño
18.2Mb
Nombre del archivo
hpupd45pcl564.exe
Fecha
1 Apr 2008
Información
The UPD version 4.5 is the latest version of HP's Universal Print Driver. Please review the entire documentation for information on issues resolved, performance improvements, and new behavior changes to the UPD.
Compañía
Hewlett Packard
Dispositivo
Impresoras y Plotters
Modelo
Hewlett Packard HP Color LaserJet 2550Ln
Descripción
Universal Print Driver x64 PostScript
Sistema Operativo
Windows 2003 64 bits-XP 64 bits-Vista 64 bits
Idioma
French
Versión Driver
4.5
Tamaño
19Mb
Nombre del archivo
hpupd45ps64.exe
Fecha
1 Apr 2008
Información
The UPD version 4.5 is the latest version of HP's Universal Print Driver. Please review the entire documentation for information on issues resolved, performance improvements, and new behavior changes to the UPD.
Compañía
Hewlett Packard
Dispositivo
Impresoras y Plotters
Modelo
Hewlett Packard HP Color LaserJet 2550Ln
Descripción
PCL6 Plug and Play Bundle
Sistema Operativo
Windows 98-Me-2000-2003-XP
Idioma
French
Versión Driver
2.0
Tamaño
11.7Mb
Nombre del archivo
clj2550pcl6-fr.exe
Información
Use this software for first time USB installations only. Do NOT attach USB cable until prompted by the installation program

If upgrading a previous installation please use the "HP Color LaserJet 2550 PCL6 driver" download and view the description which includes instructions for updating the driver.

HP Color LaserJet 2550 PCL6 Plug and Play Bundle provides the following:

An installation program to assist with installation.
The print drivers are the same as those found on the version 2.0 CD.
Windows 98/ME: 4.24.2550.400
Windows 2000/XP/2003: 60.034.78.41
Plug and Play installable drivers for 1284.4 communication with the device.
Plug and Play installable PCL6 printer driver.
The product CD can be used at a later time to install additional product software, such as Toolbox.
A silent install is provided by running the program from a DOS prompt with the following command line parameters:
lj2550pcl6-en.exe -s -a -silent

This section will help you in the download of the software to your computer and start you on the install process.
Before proceeding with the software installation, the printer must first be properly set up, and your computer must be ready to print.
Close any screen savers, virus protection programs, or other software programs running on your computer.
Click on Download Now and a File Download box will appear.
Select Save This Program to Disk and a Save As box will appear.
Select a directory to save the file in and click Save.
Locate the file using Windows Explorer when the download has completed.
Double click on the file. This will extract all the driver files into a directory on your hard drive. The default directory is Program Files\Hewlett-Packard\Color LaserJet 2550 Drivers. However, you can change the path and directory name at the time of extracting the file.
Follow the instructions presented by the installation program. Do NOT attach the USB cable to the printer until prompted by the installation program.
Compañía
Hewlett Packard
Dispositivo
Impresoras y Plotters
Modelo
Hewlett Packard HP Color LaserJet 2550Ln
Descripción
Firmware Update utility
Sistema Operativo
Windows 98-Me-2000-XP
Idioma
French
Versión Firmware
20040930
Tamaño
6.2Mb
Nombre del archivo
flash_5f2550_20040930_rev2.exe
Fecha
11 Oct 2004
Información
WARNING: Determine what the current firmware version of your printer is before downloading the update. If your printer already has the current version (20040930), downloading this file might cause possible performance issues. To determine the version of firmware of your HP Color LaserJet 2550 printer, print a Configuration Page by pressing the Go button (green) and the Cancel button (Red) on the printer's control panel. The firmware version is listed on the top left part of the page, under Product Information - Firmware Datecode.
Firmware Enhancements

These changes are implemented in the new version firmware 20040930:
Default screenmatch color treatment for non-driver PostScript jobs.
Enabled to set FONTSOURCE to a downloaded soft font via PJL.
Cyrillic/Greek/Hebrew font settings now available
Improved memory allocation for complex pages.
The default I/O timeout changed to 120 seconds.
Printing from Mac systems, and printing PDF files, will have an improved CMYK color adjustment.
Calibration will now occur on non-HP refilled cartridge that have the e-label set to "toner out".
Unexpected Paper Size messages are now bypassed by pressing Go or Cancel from the Toolbox utility.
The Supplies Status page will now include the part number for HP cartridges when recognizing a non-HP cartridge installed.
Monochrome print speed will increase by choosing "Print to Grayscale" in the driver's Color tab

Note: This utility is in English only.

* The HP Color LaserJet 2550 series Firmware Update Utility can be performed using either a Parallel or USB port.
When using the USB port, the HP Color LaserJet 2550 series software must be installed prior to using this utility.
When using the parallel port, the HP Color LaserJet 2550 series software does not need to be installed. Connect the 2550 series printer to a PC with the Firmware Update Utility loaded using a parallel cable.
* You will need 20MB of disk space to use the Firmware Update Utility.

* The HP Color LaserJet 2550 series printer must be in a READY state and remain powered on during the entire firmware update process.

* Administrator Privileges are required on the PC executing the utility.

* The control panel of the printer will display a series of flashing lights.

* After the Firmware Update Utility has finished, the HP Color LaserJet 2550 series printer will display a solid green Ready light (second from the bottom). Depending on the operating system on your PC, you may be prompted to reboot your computer.

This utility is for use on Windows 95, 98, ME, 2000 and XP. It can ONLY be used with parallel or USB connections.


Installation Instructions

* For users connected via the network, please temporarily disconnect your HP Color LaserJet 2550 series printer from the network to ensure the network devices to not interrupt the firmware upgrade process.

Parallel Cable connection
Connect a PC to the HP Color LaserJet 2550 series printer via a parallel cable.
You do not need to install the HP software for parallel upgrades.
If the "Add Hardware" wizard starts when you plug in the parallel cable, you can safely cancel it.
Double click the Flash Update utility.
Click 'OK' to begin the process. The utility will go through the following steps:
Close all toolbox and HP software running on the host PC.
Upload firmware to printer, at which point the printer lights will start flashing until complete.
Printer will then erase the old firmware and write the new firmware and reboot it.
Utility will prompt user to reboot PC (to synchronize the printer, restart Toolbox and the HP software)
DO NOT POWER CYCLE THE PRINTER during the upgrade process or it will leave your printer in an unusable state.
Once the utility is complete, it will prompt you to reboot your PC and printer to synchronize the printer and the HP Toolbox.
The firmware update can take up to 5 minutes to complete. Please be patient.
USB Connection
In order to use USB to update your printer, you must have the HP Color LaserJet 2550 series printer software installed on your PC.
You do NOT need to have toolbox installed. A driver only installation will work fine.
Ensure your HP Color LaserJet 2550 series printer is connected to the USB cable.
Double click the Flash Update utility.
Click 'OK' to begin the process. The utility will go through the following steps:
Close all Toolbox and HP software running on host PC.
Upload firmware to printer, at which point the printer lights will flash until complete.
Printer will then erase the old firmware and write the new firmware and reboot itself.
Utility will prompt user to reboot PC (to resync printer, restart toolbox and HP software)
DO NOT POWER CYCLE THE PRINTER during the upgrade process or it will leave your printer in an unusable state.
Once the utility is complete, it will prompt you to reboot your PC and printer to resync the printer and the HP Toolbox.
The firmware update can take up to 5 minutes to complete. Please be patient.
Compañía
Hewlett Packard
Dispositivo
Impresoras y Plotters
Modelo
Hewlett Packard HP Color LaserJet 2550Ln
Descripción
PCL6 Driver
Sistema Operativo
Windows NT4
Idioma
French
Versión Driver
4.24.2550.400
Tamaño
2.9Mb
Nombre del archivo
clj2550pcl6winnt4-fr.exe
Información
This section will help you in the download of the software to your computer and start you on the install process.
Before proceeding with the software installation, the printer must first be properly set up, and your computer must be ready to print.
Turn on the printer first, then turn on the computer.
Close any screen savers, virus protection programs, or other software programs running on your computer.
Click on Download Now and a File Download box will appear.
Select Save This Program to Disk and a Save As box will appear.
Select a directory to save the file in and click Save.
Locate the file using Windows Explorer when the download has completed.
Double click on the file. This will extract all the driver files into a directory on your hard drive. The directory these files are extracted to will have a similar name to the file that was downloaded (i.e., c:\clj2550pcl6). However, you can change the path and directory name at the time of extracting the file.
Open the Printers Window (Click Start-Settings-Printers).
Update the printer if it was previously installed
Right click on the printer and select Properties from the pop menu.
On the General tab, select New Driver.
Click on the Warning Box that pops up.
A printer listing box will appear. Select Have Disk.
Another box Install from Disk appears.
Click the Browse to locate the expanded files directory (i.e., c:\clj2550pcl6).
Click on the file ending with .inf .
Click Open and then OK and let files install.
Add the printer if it hasn't been installed yet.
Click Add New Printer
Follow the instructions of the Add Printer Wizard.
Compañía
Hewlett Packard
Dispositivo
Impresoras y Plotters
Modelo
Hewlett Packard HP Color LaserJet 2550Ln
Descripción
PostScript Driver
Sistema Operativo
Windows NT4
Idioma
French
Versión Driver
034.4100
Tamaño
1Mb
Nombre del archivo
clj2550pswinnt4-fr.exe
Información
This section will help you in the download of the software to your computer and start you on the install process.
Before proceeding with the software installation, the printer must first be properly set up, and your computer must be ready to print.
Turn on the printer first, then turn on the computer.
Close any screen savers, virus protection programs, or other software programs running on your computer.
Click on Download Now and a File Download box will appear.
Select Save This Program to Disk and a Save As box will appear.
Select a directory to save the file in and click Save.
Locate the file using Windows Explorer when the download has completed.
Double click on the file. This will extract all the driver files into a directory on your hard drive. The directory these files are extracted to will have a similar name to the file that was downloaded (i.e., c:\clj2550ps). However, you can change the path and directory name at the time of extracting the file.
Open the Printers Window (Click Start-Settings-Printers).
Update the printer if it was previously installed
Right click on the printer and select Properties from the pop menu.
On the General tab, select New Driver.
Click on the Warning Box that pops up.
A printer listing box will appear. Select Have Disk.
Another box Install from Disk appears.
Click the Browse to locate the expanded files directory (i.e., c:\clj2550ps).
Click on the file ending with .inf .
Click Open and then OK and let files install.
Add the printer if it hasn't been installed yet.
Click Add New Printer
Follow the instructions of the Add Printer Wizard.
Compañía
Hewlett Packard
Dispositivo
Impresoras y Plotters
Modelo
Hewlett Packard HP Color LaserJet 2550Ln
Descripción
Mobile Printing for Notebooks
Sistema Operativo
Windows NT4
Idioma
French
Versión Driver
2.10
Tamaño
3.5Mb
Nombre del archivo
mobileprinting4notebooksnt4-fr.exe
Información
HP Mobile Printing for Notebooks (formally known as HP Mobile Printing Driver) is a software solution designed to facilitate printing from mobile notebook computers to network-connected Postscript-enabled HP printers.

As the notebook user moves around within the enterprise from floor to floor or from site to site, there is a need to print to networked printers that are encountered while away from the desk. HP Mobile Printing for Notebooks allows easy printing access to these newly encountered printers. There is no need to locate the printer driver or create a new network port. The user simply selects the HP Mobile Printing application, enters the network address (IP Address, hostname, or UNC pathname) of the target printer when prompted, and the print job is sent to the printer.

A Web JetAdmin plug-in has been developed to allow IT administrators to remotely enable display of the printer IP address on the printer control panel display. To download this plug-in, please visit the HP web jetadmin software and components download site.

If the printer IP address is not displayed, you may determine the IP address by printing a Configuration Page from the printer control panel menu.

Download and Installation

Note: Before proceeding with the software installation, be aware that administrator privileges are required to install the software and configure the printing system.

Close any screen savers, virus protection programs, or other software programs running on your computer.
Click on Download Now and a File Download box will appear.
Select Save This Program to Disk and a Save As box will appear.
Select a directory to save the file in and click Save.
Locate the file using Windows Explorer when the download has completed.
Double click on the file. This will begin the installation process. During the install, you may choose to make the HP Mobile Printing the default system printer on your computer.
When the installation is complete, a new system printer named HP Mobile Printing will be located in the Printers folder on your computer.
Compañía
Hewlett Packard
Dispositivo
Impresoras y Plotters
Modelo
Hewlett Packard HP Color LaserJet 2550Ln
Descripción
Removal Tool
Sistema Operativo
Windows NT4-2000-XP
Idioma
French
Versión Driver
1.0.0.1
Tamaño
316Kb
Nombre del archivo
setconfig_exermtool.exe
Fecha
3 Jun 2005
Información
Download Info
If the following error message is encountered, please install this file for resolution.

This error message may occur with the following Hewlett-Packard LaserJet devices:
LaserJet 1010/1012/1015 Series
LaserJet 1150
LaserJet 1160
LaserJet 1300 Series
LaserJet 1320 Series
LaserJet 3015/3020/3030/3380 Series
Color LaserJet 2550
Note: If the error is encountered, it will be after the initial printer software install and upon consequential system reboots.

This section will help you in the download of the software to your computer and start you on the install process.
Close any screen savers, virus protection programs, or other software programs running on your computer.
Click on Download and a File Download box will appear.
Select Save This Program to Disk and a Save As box will appear.
Select a directory to save the file in and click Save.
Locate the file using Windows Explorer when the download has completed.
Double click on the file. It will execute and install the necessary files.




Compañía
Hewlett Packard
Dispositivo
Impresoras y Plotters
Modelo
Hewlett Packard HP Color LaserJet 2550Ln
Descripción
Installer
Sistema Operativo
Mac OS 9
Idioma
German
Versión Driver
4.1
Tamaño
4Mb
Nombre del archivo
clj2550installer-ge.sit
Información
HP Color LaserJet 2550 Installer for Mac OS 9.

Compañía
Hewlett Packard
Dispositivo
Impresoras y Plotters
Modelo
Hewlett Packard HP Color LaserJet 2550Ln
Descripción
Printing software and utility
Sistema Operativo
Mac OS 9
Idioma
German
Versión Utilities
4.1
Tamaño
4Mb
Nombre del archivo
clj2550mac9_x-ge.sit
Información
The HP LaserJet Installer provides HP LaserJet PostScript printing support for the Mac 9.1 and 9.2 operating systems.
Compañía
Hewlett Packard
Dispositivo
Impresoras y Plotters
Modelo
Hewlett Packard HP Color LaserJet 2550Ln
Descripción
Firmware Update utility
Sistema Operativo
Mac OS X
Idioma
German
Versión Firmware
20040930
Tamaño
5.6Mb
Nombre del archivo
2550_fw_update20040930.dmg
Fecha
28 Jul 2005
Información
WARNING: Determine what the current firmware version of your printer is before downloading the update. If your printer already has the current version (20040930), downloading this file might cause possible performance issues. To determine the version of firmware of your HP Color LaserJet 2550 printer, print a Configuration Page by pressing the Go button (green) and the Cancel button (Red) on the printer's control panel. The firmware version is listed on the top left part of the page, under Product Information - Firmware Datecode.

Firmware Enhancements

These changes are implemented in the new version firmware 20040930:
Default screenmatch color treatment for non-driver PostScript jobs.
Enabled to set FONTSOURCE to a downloaded soft font via PJL.
Cyrillic/Greek/Hebrew font settings now available
Improved memory allocation for complex pages.
The default I/O timeout changed to 120 seconds.
Printing from Mac systems, and printing PDF files, will have an improved CMYK color adjustment.
Calibration will now occur on non-HP refilled cartridge that have the e-label set to "toner out".
Unexpected Paper Size messages are now bypassed by pressing Go or Cancel from the Toolbox utility.
The Supplies Status page will now include the part number for HP cartridges when recognizing a non-HP cartridge installed.
Monochrome print speed will increase by choosing "Print to Grayscale" in the driver's Color tab.

Note: This utility is in English only.

* You will need 20MB of disk space to use the Firmware Update Utility.

* The HP Color LaserJet 2550 series printer must be in a READY state and remain powered on during the entire firmware update process.

* The control panel of the printer will display a series of flashing lights.

* After the Firmware Update Utility has finished, the HP Color LaserJet 2550 series printer will display a solid green Ready light (second from the bottom). You may be prompted to reboot your computer.


Installation Instructions

(NOTE! If you use Internet Explorer to download the utility, it may strip the .dmg extension to the file. Simply re-add the .dmg extension and MAC OS X should recognize the file as a disk image)

This utility is for use on any OS X 10.2 or 10.3 Mac. It will NOT function in the MAC OS 9 environment.

It can only be used with a USB connection to the HP Color LaserJet 2550.

Instructions for upgrade

* For users connected via the network, please temporarily disconnect your HP Color LaserJet 2550 series printer from the network to ensure the network devices to not interrupt the FW upgrade process.
Mount the disk image containing the FW update.
Run the FW Update Application contained in the disk image.
Follow the onscreen prompts to continue.
When prompted, connect the printer via USB.
Upon finding an HP Color LaserJet 2550 series printer, the utility will prompt you to reboot the printer by simply turn the power off and back on. This ensures the printer is in a proper state to receive the update.
Once the printer has been rebooted, the utility will allow you to 'download' the firmware to the HP Color LaserJet 2550 series printer.
DO NOT POWER CYCLE THE PRINTER during the upgrade process or it will leave your printer in an unusable state.
One green LED will start flashing initially followed by 2 LED's flashing.
Once the LEDS stop flashing, the printer has updated and re-initialized, the firmware should be updated.
The firmware update can take up to 5 minutes to complete. Please be patient.
Compañía
Hewlett Packard
Dispositivo
Impresoras y Plotters
Modelo
Hewlett Packard HP Color LaserJet 2550Ln
Descripción
Installer Print Only Software Solution for v10.2 v10.3.x v10.4.x v10.5
Sistema Operativo
Mac OS X
Idioma
German
Versión Driver
7.8.0.761
Tamaño
29.1Mb
Nombre del archivo
hp_laserjet_and_edgeline_print-only.dmg
Fecha
28 Jan 2008
Información
This download package contains HP LaserJet Mac OS X Installer Print Only Software Solution v7.8.0.761. Included are the HP Postscript PPD and PDE files for Mac OS X v10.2, v10.3.x, v10.4.x, v10.5 - PPC and Intel processor.
Supported Devices
HP color LaserJet 2500
HP color LaserJet 2550 series
HP color LaserJet 3700
HP color LaserJet 4600
HP color LaserJet 4650
HP color LaserJet 5500
HP Color LaserJet 5550
HP Color LaserJet 8500
HP Color LaserJet 8550
HP color LaserJet 9500
HP color LaserJet 9500 MFP
HP Color LaserJet
HP Color LaserJet 5/5M
HP Color LaserJet 4500
HP Color LaserJet 4550
HP LaserJet 1200
HP LaserJet 1300
HP LaserJet 1300n
HP LaserJet 1320 series
HP LaserJet 2100 Series
HP LaserJet 2200
HP LaserJet 4000 Series
HP LaserJet 4050 Series
HP LaserJet 4100 MFP
HP LaserJet 4100 Series
HP LaserJet 4200
HP LaserJet 4200L
HP LaserJet 4240
HP LaserJet 4240N
HP LaserJet 4250
HP LaserJet 4250L
HP LaserJet 4300
HP LaserJet 4350
HP LaserJet 4350L
HP LaserJet 4V
HP LaserJet 5000 Series
HP LaserJet 5100 Series
HP LaserJet 8000 Series
HP LaserJet 8100 Series
HP LaserJet 8150 Series
HP LaserJet 9000 MFP
HP LaserJet 9000L MFP
HP LaserJet 9000 Series
HP LaserJet 9040
HP LaserJet 9040 MFP
HP LaserJet 9050 MFP
HP LaserJet 9050
HP LaserJet 9055 mfp
HP LaserJet 9065 mfp
HP LaserJet 4 Plus
HP LaserJet 4ML
HP LaserJet 4MP
HP LaserJet 4Si
HP LaserJet 5M
HP LaserJet 5P
HP LaserJet 5Si
HP LaserJet 5Si Mopier
HP LaserJet 6P
HP Mopier 240
HP Mopier 320
HP LaserJet 1220
HP LaserJet 3015
HP LaserJet 3020
HP LaserJet 3030
HP LaserJet 3200
HP LaserJet 3300/3310/3320
HP LaserJet 3300
HP LaserJet 3380
HP business inkjet 2300
HP Business Inkjet 2600
HP Business Inkjet 2800
HP Business Inkjet 3000
HP officejet 9100 series
HP Business Inkjet 2250
HP Business Inkjet 2280
Compañía
Hewlett Packard
Dispositivo
Impresoras y Plotters
Modelo
Hewlett Packard HP Color LaserJet 2550Ln
Descripción
PostScript Driver
Sistema Operativo
Windows 2000-2003-XP
Idioma
German
Versión Driver
60.34.78.41
Tamaño
5.4Mb
Nombre del archivo
clj2550pswin2kxp2003-ge.exe
Información
Enhancements

Incorporated JPEG compression to reduce spool file size.
Resolves spoolsv.exe crash when printing some PowerPoint documents.
Control Panel simulator in the Services tab is now functional.

This section will help you in the download of the software to your computer and start you on the install process.
Before proceeding with the software installation, the printer must first be properly set up, and your computer must be ready to print.

DOWNLOAD AND EXTRACT THE SOFTWARE

Close any screen savers, virus protection programs, or other software programs running on your computer.
Click on Download Now and a File Download box will appear.
Select Save This Program to Disk and a Save As box will appear.
Select a directory to save the file in and click Save.
Locate the file using Windows Explorer when the download has completed.
Double click on the file. This will extract all the driver files into a directory on your hard drive. The directory these files are extracted to will have a similar name to the file that was downloaded (i.e., c:\clj2550ps). However, you can change the path and directory name at the time of extracting the file.
PLEASE USE THESE STEPS IF YOU ARE UPDATING THE HP COLOR LASERJET 2550 DRIVER
From the Windows XP desktop, click Start, and then Printers and Faxes (for Windows 2000, click Start, Settings and then Printers).
Right click on the hp color LaserJet 2550 PostScript icon or listing, and then click Properties.
Click the Advanced tab.
Make certain the Driver box displays hp color LaserJet 2550 PostScript, and then click New Driver.
In the Add Printer Driver Wizard window, click Have Disk, and then Browse.
Browse to the directory that the downloaded files where unzipped to.

NOTE: The default directory would be c:\clj2550pswin2kxp2003-xx (xx represents language, such as en for English)

The Look in box will display clj2550pswin2kxp2003-xx (xx represents language, such as en for English). Do not open any folders in this directory. The autorun.ini file should be in the File name box. Click Open.
On the Install From Disk window, click OK. The print driver name, hp color LaserJet 2550 PostScript, should be displayed. Click Next to continue.
When the update is finished, click OK to close the hp color LaserJet 2550 PostScript Properties window. The update is now complete.
PLEASE USE THESE STEPS IF THIS IS A FIRST TIME INSTALLATION OF THE HP COLOR LASERJET 2550 DRIVER:
Attach a USB or parallel cable to the printer and the computer.
The "Found New Hardware Wizard" should appear. Note: If attaching via a parallel cable it may be necessary to restart the computer for the "Found New Hardware Wizard" to appear.
For Windows XP
Choose "Install from a list or specific location (advanced)" and then click Next.
Select only the box next to "Include this location in the search" (clear all other check boxes) then click the browse button to locate the directory where the driver was extracted to in the steps above. The directory these files are extracted to will have a similar name to the file that was downloaded (i.e., c:\clj2550ps).
Click once on the directory name to highlight it then choose OK. The directory path then appears in the dialog.
Select the Next button. Files will be copied to the appropriate directories automatically.
Click the Finish button within the "New Hardware Wizard"
After several moments and message will appear on the system tray (at the bottom right of the screen near the clock) indicating that "Your new hardware has been installed and is ready to use.

For Windows 2000
Click the Next button to continue.
Choose "Search for a suitable driver form my device (recommended)" and then click Next.
Select only the box next to "Specify a location" (clear all other check boxes) and click Next.
Click the browse button to locate the directory where the driver was extracted to in the steps above. The directory these files are extracted to will have a similar name to the file that was downloaded (i.e., c:\clj2550ps).
Click once on the directory name to highlight it and then select the Open button.
Autorun.inf should appear in the "file name" box. Click the Open button.
Select OK. The wizard will find the driver for the device.
Click the Next button.
Click Finish. Several dialogs will appear and then disappear.
The printer driver is now installed.
Compañía
Hewlett Packard
Dispositivo
Impresoras y Plotters
Modelo
Hewlett Packard HP Color LaserJet 2550Ln
Descripción
PCL6 Driver
Sistema Operativo
Windows 2000-2003-XP
Idioma
German
Versión Driver
60.34.78.41
Tamaño
5.6Mb
Nombre del archivo
clj2550pcl6win2kxp2003-de.exe
Información
Enhancements

Incorporated JPEG compression to reduce spool file size.
Resolves spoolsv.exe crash when printing some PowerPoint documents.
Control Panel simulator in the Services tab is now functional.

This section will help you in the download of the software to your computer and start you on the install process.
Before proceeding with the software installation, the printer must first be properly set up, and your computer must be ready to print.

DOWNLOAD AND EXTRACT THE SOFTWARE

Close any screen savers, virus protection programs, or other software programs running on your computer.
Click on Download Now and a File Download box will appear.
Select Save This Program to Disk and a Save As box will appear.
Select a directory to save the file in and click Save.
Locate the file using Windows Explorer when the download has completed.
Double click on the file. This will extract all the driver files into a directory on your hard drive. The directory these files are extracted to will have a similar name to the file that was downloaded (i.e., c:\clj2550pcl6). However, you can change the path and directory name at the time of extracting the file.
PLEASE USE THESE STEPS IF YOU ARE UPDATING THE HP COLOR LASERJET 2550 DRIVER
From the Windows XP desktop, click Start, and then Printers and Faxes (for Windows 2000, click Start, Settings and then Printers).
Right click on the hp color LaserJet 2550 PCL6 icon or listing, and then click Properties.
Click the Advanced tab.
Make certain the Driver box displays hp color LaserJet 2550 PCL6, and then click New Driver.
In the Add Printer Driver Wizard window, click Have Disk, and then Browse.
Browse to the directory that the downloaded files where unzipped to.

NOTE: The default directory would be C:\clj2550pcl6 (xx represents language, such as en for English)

The Look in box will display clj2550pcl6win2kxp2003-xx (xx represents language, such as en for English). Do not open any folders in this directory. The autorun.ini file should be in the File name box. Click Open.
On the Install From Disk window, click OK. The print driver name, hp color LaserJet 2550 PCL6, should be displayed. Click Next to continue.
When the update is finished, click OK to close the hp color LaserJet 2550 PCL6 Properties window. The update is now complete.
PLEASE USE THESE STEPS IF THIS IS A FIRST TIME INSTALLATION OF THE HP COLOR LASERJET 2550 DRIVER:
Attach a USB or parallel cable to the printer and the computer.
The "Found New Hardware Wizard" should appear. Note: If attaching via a parallel cable it may be necessary to restart the computer for the "Found New Hardware Wizard" to appear.
For Windows XP
Choose "Install from a list or specific location (advanced)" and then click Next.
Select only the box next to "Include this location in the search" (clear all other check boxes) then click the browse button to locate the directory where the driver was extracted to in the steps above. The directory these files are extracted to will have a similar name to the file that was downloaded (i.e., c:\clj2550pcl6).
Click once on the directory name to highlight it then choose OK. The directory path then appears in the dialog.
Select the Next button. Files will be copied to the appropriate directories automatically.
Click the Finish button within the "New Hardware Wizard"
After several moments and message will appear on the system tray (at the bottom right of the screen near the clock) indicating that "Your new hardware has been installed and is ready to use.

For Windows 2000
Click the Next button to continue.
Choose "Search for a suitable driver form my device (recommended)" and then click Next.
Select only the box next to "Specify a location" (clear all other check boxes) and click Next.
Click the browse button to locate the directory where the driver was extracted to in the steps above. The directory these files are extracted to will have a similar name to the file that was downloaded (i.e., c:\clj2550pcl6).
Click once on the directory name to highlight it and then select the Open button.
Autorun.inf should appear in the "file name" box. Click the Open button.
Select OK. The wizard will find the driver for the device.
Click the Next button.
Click Finish. Several dialogs will appear and then disappear.
The printer driver is now installed.
Compañía
Hewlett Packard
Dispositivo
Impresoras y Plotters
Modelo
Hewlett Packard HP Color LaserJet 2550Ln
Descripción
PCL6 Driver
Sistema Operativo
Windows 2000-2003-XP-Vista
Idioma
German
Versión Driver
4.5
Tamaño
18Mb
Nombre del archivo
hpupd45pcl632.exe
Fecha
1 Apr 2008
Información
The UPD version 4.5 is the latest version of HP's Universal Print Driver. Please review the entire documentation for information on issues resolved, performance improvements, and new behavior changes to the UPD.
Compañía
Hewlett Packard
Dispositivo
Impresoras y Plotters
Modelo
Hewlett Packard HP Color LaserJet 2550Ln
Descripción
Universal Print Driver PCL 5
Sistema Operativo
Windows 2000-2003-XP-Vista
Idioma
German
Versión Driver
4.5
Tamaño
17.8Mb
Nombre del archivo
hpupd45pcl532.exe
Fecha
1 Apr 2008
Información
The UPD version 4.5 is the latest version of HP's Universal Print Driver. Please review the entire documentation for information on issues resolved, performance improvements, and new behavior changes to the UPD.
Compañía
Hewlett Packard
Dispositivo
Impresoras y Plotters
Modelo
Hewlett Packard HP Color LaserJet 2550Ln
Descripción
Universal Print Driver PostScript
Sistema Operativo
Windows 2000-2003-XP-Vista
Idioma
German
Versión Driver
4.5
Tamaño
18.6Mb
Nombre del archivo
hpupd45ps32.exe
Fecha
1 Apr 2008
Información
The UPD version 4.5 is the latest version of HP's Universal Print Driver. Please review the entire documentation for information on issues resolved, performance improvements, and new behavior changes to the UPD.
Compañía
Hewlett Packard
Dispositivo
Impresoras y Plotters
Modelo
Hewlett Packard HP Color LaserJet 2550Ln
Descripción
Universal Print Driver x64 PostScript
Sistema Operativo
Windows 2003 64 bits-XP 64 bits-Vista 64 bits
Idioma
German
Versión Driver
4.5
Tamaño
19Mb
Nombre del archivo
hpupd45ps64.exe
Fecha
1 Apr 2008
Información
The UPD version 4.5 is the latest version of HP's Universal Print Driver. Please review the entire documentation for information on issues resolved, performance improvements, and new behavior changes to the UPD.
Compañía
Hewlett Packard
Dispositivo
Impresoras y Plotters
Modelo
Hewlett Packard HP Color LaserJet 2550Ln
Descripción
PCL5 Driver
Sistema Operativo
Windows 2003 64 bits-XP 64 bits-Vista 64 bits
Idioma
German
Versión Driver
4.5
Tamaño
18.2Mb
Nombre del archivo
hpupd45pcl564.exe
Fecha
1 Apr 2008
Información
The UPD version 4.5 is the latest version of HP's Universal Print Driver. Please review the entire documentation for information on issues resolved, performance improvements, and new behavior changes to the UPD.
Compañía
Hewlett Packard
Dispositivo
Impresoras y Plotters
Modelo
Hewlett Packard HP Color LaserJet 2550Ln
Descripción
PCL6 Driver
Sistema Operativo
Windows 2003 64 bits-XP 64 bits-Vista 64 bits
Idioma
German
Versión Driver
4.5
Tamaño
18.2Mb
Nombre del archivo
hpupd45pcl664.exe
Fecha
1 Apr 2008
Información
The UPD version 4.5 is the latest version of HP's Universal Print Driver. Please review the entire documentation for information on issues resolved, performance improvements, and new behavior changes to the UPD.
Compañía
Hewlett Packard
Dispositivo
Impresoras y Plotters
Modelo
Hewlett Packard HP Color LaserJet 2550Ln
Descripción
PCL6 Plug and Play Bundle
Sistema Operativo
Windows 98-Me-2000-2003-XP
Idioma
German
Versión Driver
2.0
Tamaño
11.7Mb
Nombre del archivo
clj2550pcl6-ge.exe
Información
Use this software for first time USB installations only. Do NOT attach USB cable until prompted by the installation program

If upgrading a previous installation please use the "HP Color LaserJet 2550 PCL6 driver" download and view the description which includes instructions for updating the driver.

HP Color LaserJet 2550 PCL6 Plug and Play Bundle provides the following:

An installation program to assist with installation.
The print drivers are the same as those found on the version 2.0 CD.
Windows 98/ME: 4.24.2550.400
Windows 2000/XP/2003: 60.034.78.41
Plug and Play installable drivers for 1284.4 communication with the device.
Plug and Play installable PCL6 printer driver.
The product CD can be used at a later time to install additional product software, such as Toolbox.
A silent install is provided by running the program from a DOS prompt with the following command line parameters:
lj2550pcl6-en.exe -s -a -silent

This section will help you in the download of the software to your computer and start you on the install process.
Before proceeding with the software installation, the printer must first be properly set up, and your computer must be ready to print.
Close any screen savers, virus protection programs, or other software programs running on your computer.
Click on Download Now and a File Download box will appear.
Select Save This Program to Disk and a Save As box will appear.
Select a directory to save the file in and click Save.
Locate the file using Windows Explorer when the download has completed.
Double click on the file. This will extract all the driver files into a directory on your hard drive. The default directory is Program Files\Hewlett-Packard\Color LaserJet 2550 Drivers. However, you can change the path and directory name at the time of extracting the file.
Follow the instructions presented by the installation program. Do NOT attach the USB cable to the printer until prompted by the installation program.
Compañía
Hewlett Packard
Dispositivo
Impresoras y Plotters
Modelo
Hewlett Packard HP Color LaserJet 2550Ln
Descripción
Firmware Update utility
Sistema Operativo
Windows 98-Me-2000-XP
Idioma
German
Versión Firmware
20040930
Tamaño
6.2Mb
Nombre del archivo
flash_5f2550_20040930_rev2.exe
Fecha
11 Oct 2004
Información
WARNING: Determine what the current firmware version of your printer is before downloading the update. If your printer already has the current version (20040930), downloading this file might cause possible performance issues. To determine the version of firmware of your HP Color LaserJet 2550 printer, print a Configuration Page by pressing the Go button (green) and the Cancel button (Red) on the printer's control panel. The firmware version is listed on the top left part of the page, under Product Information - Firmware Datecode.
Firmware Enhancements

These changes are implemented in the new version firmware 20040930:
Default screenmatch color treatment for non-driver PostScript jobs.
Enabled to set FONTSOURCE to a downloaded soft font via PJL.
Cyrillic/Greek/Hebrew font settings now available
Improved memory allocation for complex pages.
The default I/O timeout changed to 120 seconds.
Printing from Mac systems, and printing PDF files, will have an improved CMYK color adjustment.
Calibration will now occur on non-HP refilled cartridge that have the e-label set to "toner out".
Unexpected Paper Size messages are now bypassed by pressing Go or Cancel from the Toolbox utility.
The Supplies Status page will now include the part number for HP cartridges when recognizing a non-HP cartridge installed.
Monochrome print speed will increase by choosing "Print to Grayscale" in the driver's Color tab

Note: This utility is in English only.

* The HP Color LaserJet 2550 series Firmware Update Utility can be performed using either a Parallel or USB port.
When using the USB port, the HP Color LaserJet 2550 series software must be installed prior to using this utility.
When using the parallel port, the HP Color LaserJet 2550 series software does not need to be installed. Connect the 2550 series printer to a PC with the Firmware Update Utility loaded using a parallel cable.
* You will need 20MB of disk space to use the Firmware Update Utility.

* The HP Color LaserJet 2550 series printer must be in a READY state and remain powered on during the entire firmware update process.

* Administrator Privileges are required on the PC executing the utility.

* The control panel of the printer will display a series of flashing lights.

* After the Firmware Update Utility has finished, the HP Color LaserJet 2550 series printer will display a solid green Ready light (second from the bottom). Depending on the operating system on your PC, you may be prompted to reboot your computer.

This utility is for use on Windows 95, 98, ME, 2000 and XP. It can ONLY be used with parallel or USB connections.


Installation Instructions

* For users connected via the network, please temporarily disconnect your HP Color LaserJet 2550 series printer from the network to ensure the network devices to not interrupt the firmware upgrade process.

Parallel Cable connection
Connect a PC to the HP Color LaserJet 2550 series printer via a parallel cable.
You do not need to install the HP software for parallel upgrades.
If the "Add Hardware" wizard starts when you plug in the parallel cable, you can safely cancel it.
Double click the Flash Update utility.
Click 'OK' to begin the process. The utility will go through the following steps:
Close all toolbox and HP software running on the host PC.
Upload firmware to printer, at which point the printer lights will start flashing until complete.
Printer will then erase the old firmware and write the new firmware and reboot it.
Utility will prompt user to reboot PC (to synchronize the printer, restart Toolbox and the HP software)
DO NOT POWER CYCLE THE PRINTER during the upgrade process or it will leave your printer in an unusable state.
Once the utility is complete, it will prompt you to reboot your PC and printer to synchronize the printer and the HP Toolbox.
The firmware update can take up to 5 minutes to complete. Please be patient.
USB Connection
In order to use USB to update your printer, you must have the HP Color LaserJet 2550 series printer software installed on your PC.
You do NOT need to have toolbox installed. A driver only installation will work fine.
Ensure your HP Color LaserJet 2550 series printer is connected to the USB cable.
Double click the Flash Update utility.
Click 'OK' to begin the process. The utility will go through the following steps:
Close all Toolbox and HP software running on host PC.
Upload firmware to printer, at which point the printer lights will flash until complete.
Printer will then erase the old firmware and write the new firmware and reboot itself.
Utility will prompt user to reboot PC (to resync printer, restart toolbox and HP software)
DO NOT POWER CYCLE THE PRINTER during the upgrade process or it will leave your printer in an unusable state.
Once the utility is complete, it will prompt you to reboot your PC and printer to resync the printer and the HP Toolbox.
The firmware update can take up to 5 minutes to complete. Please be patient.
Compañía
Hewlett Packard
Dispositivo
Impresoras y Plotters
Modelo
Hewlett Packard HP Color LaserJet 2550Ln
Descripción
PostScript Driver
Sistema Operativo
Windows NT4
Idioma
German
Versión Driver
034.4100
Tamaño
1Mb
Nombre del archivo
clj2550pswinnt4-ge.exe
Información
This section will help you in the download of the software to your computer and start you on the install process.
Before proceeding with the software installation, the printer must first be properly set up, and your computer must be ready to print.
Turn on the printer first, then turn on the computer.
Close any screen savers, virus protection programs, or other software programs running on your computer.
Click on Download Now and a File Download box will appear.
Select Save This Program to Disk and a Save As box will appear.
Select a directory to save the file in and click Save.
Locate the file using Windows Explorer when the download has completed.
Double click on the file. This will extract all the driver files into a directory on your hard drive. The directory these files are extracted to will have a similar name to the file that was downloaded (i.e., c:\clj2550ps). However, you can change the path and directory name at the time of extracting the file.
Open the Printers Window (Click Start-Settings-Printers).
Update the printer if it was previously installed
Right click on the printer and select Properties from the pop menu.
On the General tab, select New Driver.
Click on the Warning Box that pops up.
A printer listing box will appear. Select Have Disk.
Another box Install from Disk appears.
Click the Browse to locate the expanded files directory (i.e., c:\clj2550ps).
Click on the file ending with .inf .
Click Open and then OK and let files install.
Add the printer if it hasn't been installed yet.
Click Add New Printer
Follow the instructions of the Add Printer Wizard.
Compañía
Hewlett Packard
Dispositivo
Impresoras y Plotters
Modelo
Hewlett Packard HP Color LaserJet 2550Ln
Descripción
Mobile Printing for Notebooks
Sistema Operativo
Windows NT4
Idioma
German
Versión Driver
2.10
Tamaño
3.4Mb
Nombre del archivo
mobileprinting4notebooksnt4-de.exe
Información
HP Mobile Printing for Notebooks (formally known as HP Mobile Printing Driver) is a software solution designed to facilitate printing from mobile notebook computers to network-connected Postscript-enabled HP printers.

As the notebook user moves around within the enterprise from floor to floor or from site to site, there is a need to print to networked printers that are encountered while away from the desk. HP Mobile Printing for Notebooks allows easy printing access to these newly encountered printers. There is no need to locate the printer driver or create a new network port. The user simply selects the HP Mobile Printing application, enters the network address (IP Address, hostname, or UNC pathname) of the target printer when prompted, and the print job is sent to the printer.

A Web JetAdmin plug-in has been developed to allow IT administrators to remotely enable display of the printer IP address on the printer control panel display. To download this plug-in, please visit the HP web jetadmin software and components download site.

If the printer IP address is not displayed, you may determine the IP address by printing a Configuration Page from the printer control panel menu.

Download and Installation

Note: Before proceeding with the software installation, be aware that administrator privileges are required to install the software and configure the printing system.

Close any screen savers, virus protection programs, or other software programs running on your computer.
Click on Download Now and a File Download box will appear.
Select Save This Program to Disk and a Save As box will appear.
Select a directory to save the file in and click Save.
Locate the file using Windows Explorer when the download has completed.
Double click on the file. This will begin the installation process. During the install, you may choose to make the HP Mobile Printing the default system printer on your computer.
When the installation is complete, a new system printer named HP Mobile Printing will be located in the Printers folder on your computer.
Compañía
Hewlett Packard
Dispositivo
Impresoras y Plotters
Modelo
Hewlett Packard HP Color LaserJet 2550Ln
Descripción
PCL6 Driver
Sistema Operativo
Windows NT4
Idioma
German
Versión Driver
4.24.2550.400
Tamaño
2.9Mb
Nombre del archivo
clj2550pcl6winnt4-ge.exe
Información
This section will help you in the download of the software to your computer and start you on the install process.
Before proceeding with the software installation, the printer must first be properly set up, and your computer must be ready to print.
Turn on the printer first, then turn on the computer.
Close any screen savers, virus protection programs, or other software programs running on your computer.
Click on Download Now and a File Download box will appear.
Select Save This Program to Disk and a Save As box will appear.
Select a directory to save the file in and click Save.
Locate the file using Windows Explorer when the download has completed.
Double click on the file. This will extract all the driver files into a directory on your hard drive. The directory these files are extracted to will have a similar name to the file that was downloaded (i.e., c:\clj2550pcl6). However, you can change the path and directory name at the time of extracting the file.
Open the Printers Window (Click Start-Settings-Printers).
Update the printer if it was previously installed
Right click on the printer and select Properties from the pop menu.
On the General tab, select New Driver.
Click on the Warning Box that pops up.
A printer listing box will appear. Select Have Disk.
Another box Install from Disk appears.
Click the Browse to locate the expanded files directory (i.e., c:\clj2550pcl6).
Click on the file ending with .inf .
Click Open and then OK and let files install.
Add the printer if it hasn't been installed yet.
Click Add New Printer
Follow the instructions of the Add Printer Wizard.
Compañía
Hewlett Packard
Dispositivo
Impresoras y Plotters
Modelo
Hewlett Packard HP Color LaserJet 2550Ln
Descripción
Removal Tool
Sistema Operativo
Windows NT4-2000-XP
Idioma
German
Versión Driver
1.0.0.1
Tamaño
316Kb
Nombre del archivo
setconfig_exermtool.exe
Fecha
3 Jun 2005
Información
Download Info
If the following error message is encountered, please install this file for resolution.

This error message may occur with the following Hewlett-Packard LaserJet devices:
LaserJet 1010/1012/1015 Series
LaserJet 1150
LaserJet 1160
LaserJet 1300 Series
LaserJet 1320 Series
LaserJet 3015/3020/3030/3380 Series
Color LaserJet 2550
Note: If the error is encountered, it will be after the initial printer software install and upon consequential system reboots.

This section will help you in the download of the software to your computer and start you on the install process.
Close any screen savers, virus protection programs, or other software programs running on your computer.
Click on Download and a File Download box will appear.
Select Save This Program to Disk and a Save As box will appear.
Select a directory to save the file in and click Save.
Locate the file using Windows Explorer when the download has completed.
Double click on the file. It will execute and install the necessary files.




Compañía
Hewlett Packard
Dispositivo
Impresoras y Plotters
Modelo
Hewlett Packard HP Color LaserJet 2550Ln
Descripción
Firmware Update utility
Sistema Operativo
Mac OS X
Idioma
Greek
Versión Firmware
20040930
Tamaño
5.6Mb
Nombre del archivo
2550_fw_update20040930.dmg
Fecha
28 Jul 2005
Información
WARNING: Determine what the current firmware version of your printer is before downloading the update. If your printer already has the current version (20040930), downloading this file might cause possible performance issues. To determine the version of firmware of your HP Color LaserJet 2550 printer, print a Configuration Page by pressing the Go button (green) and the Cancel button (Red) on the printer's control panel. The firmware version is listed on the top left part of the page, under Product Information - Firmware Datecode.

Firmware Enhancements

These changes are implemented in the new version firmware 20040930:
Default screenmatch color treatment for non-driver PostScript jobs.
Enabled to set FONTSOURCE to a downloaded soft font via PJL.
Cyrillic/Greek/Hebrew font settings now available
Improved memory allocation for complex pages.
The default I/O timeout changed to 120 seconds.
Printing from Mac systems, and printing PDF files, will have an improved CMYK color adjustment.
Calibration will now occur on non-HP refilled cartridge that have the e-label set to "toner out".
Unexpected Paper Size messages are now bypassed by pressing Go or Cancel from the Toolbox utility.
The Supplies Status page will now include the part number for HP cartridges when recognizing a non-HP cartridge installed.
Monochrome print speed will increase by choosing "Print to Grayscale" in the driver's Color tab.

Note: This utility is in English only.

* You will need 20MB of disk space to use the Firmware Update Utility.

* The HP Color LaserJet 2550 series printer must be in a READY state and remain powered on during the entire firmware update process.

* The control panel of the printer will display a series of flashing lights.

* After the Firmware Update Utility has finished, the HP Color LaserJet 2550 series printer will display a solid green Ready light (second from the bottom). You may be prompted to reboot your computer.


Installation Instructions

(NOTE! If you use Internet Explorer to download the utility, it may strip the .dmg extension to the file. Simply re-add the .dmg extension and MAC OS X should recognize the file as a disk image)

This utility is for use on any OS X 10.2 or 10.3 Mac. It will NOT function in the MAC OS 9 environment.

It can only be used with a USB connection to the HP Color LaserJet 2550.

Instructions for upgrade

* For users connected via the network, please temporarily disconnect your HP Color LaserJet 2550 series printer from the network to ensure the network devices to not interrupt the FW upgrade process.
Mount the disk image containing the FW update.
Run the FW Update Application contained in the disk image.
Follow the onscreen prompts to continue.
When prompted, connect the printer via USB.
Upon finding an HP Color LaserJet 2550 series printer, the utility will prompt you to reboot the printer by simply turn the power off and back on. This ensures the printer is in a proper state to receive the update.
Once the printer has been rebooted, the utility will allow you to 'download' the firmware to the HP Color LaserJet 2550 series printer.
DO NOT POWER CYCLE THE PRINTER during the upgrade process or it will leave your printer in an unusable state.
One green LED will start flashing initially followed by 2 LED's flashing.
Once the LEDS stop flashing, the printer has updated and re-initialized, the firmware should be updated.
The firmware update can take up to 5 minutes to complete. Please be patient.
Compañía
Hewlett Packard
Dispositivo
Impresoras y Plotters
Modelo
Hewlett Packard HP Color LaserJet 2550Ln
Descripción
PostScript Driver
Sistema Operativo
Windows 2000-2003-XP
Idioma
Greek
Versión Driver
60.34.78.41
Tamaño
5.3Mb
Nombre del archivo
clj2550pswin2kxp2003-el.exe
Información
Enhancements

Incorporated JPEG compression to reduce spool file size.
Resolves spoolsv.exe crash when printing some PowerPoint documents.
Control Panel simulator in the Services tab is now functional.

This section will help you in the download of the software to your computer and start you on the install process.
Before proceeding with the software installation, the printer must first be properly set up, and your computer must be ready to print.

DOWNLOAD AND EXTRACT THE SOFTWARE

Close any screen savers, virus protection programs, or other software programs running on your computer.
Click on Download Now and a File Download box will appear.
Select Save This Program to Disk and a Save As box will appear.
Select a directory to save the file in and click Save.
Locate the file using Windows Explorer when the download has completed.
Double click on the file. This will extract all the driver files into a directory on your hard drive. The directory these files are extracted to will have a similar name to the file that was downloaded (i.e., c:\clj2550ps). However, you can change the path and directory name at the time of extracting the file.
PLEASE USE THESE STEPS IF YOU ARE UPDATING THE HP COLOR LASERJET 2550 DRIVER
From the Windows XP desktop, click Start, and then Printers and Faxes (for Windows 2000, click Start, Settings and then Printers).
Right click on the hp color LaserJet 2550 PostScript icon or listing, and then click Properties.
Click the Advanced tab.
Make certain the Driver box displays hp color LaserJet 2550 PostScript, and then click New Driver.
In the Add Printer Driver Wizard window, click Have Disk, and then Browse.
Browse to the directory that the downloaded files where unzipped to.

NOTE: The default directory would be c:\clj2550pswin2kxp2003-xx (xx represents language, such as en for English)

The Look in box will display clj2550pswin2kxp2003-xx (xx represents language, such as en for English). Do not open any folders in this directory. The autorun.ini file should be in the File name box. Click Open.
On the Install From Disk window, click OK. The print driver name, hp color LaserJet 2550 PostScript, should be displayed. Click Next to continue.
When the update is finished, click OK to close the hp color LaserJet 2550 PostScript Properties window. The update is now complete.
PLEASE USE THESE STEPS IF THIS IS A FIRST TIME INSTALLATION OF THE HP COLOR LASERJET 2550 DRIVER:
Attach a USB or parallel cable to the printer and the computer.
The "Found New Hardware Wizard" should appear. Note: If attaching via a parallel cable it may be necessary to restart the computer for the "Found New Hardware Wizard" to appear.
For Windows XP
Choose "Install from a list or specific location (advanced)" and then click Next.
Select only the box next to "Include this location in the search" (clear all other check boxes) then click the browse button to locate the directory where the driver was extracted to in the steps above. The directory these files are extracted to will have a similar name to the file that was downloaded (i.e., c:\clj2550ps).
Click once on the directory name to highlight it then choose OK. The directory path then appears in the dialog.
Select the Next button. Files will be copied to the appropriate directories automatically.
Click the Finish button within the "New Hardware Wizard"
After several moments and message will appear on the system tray (at the bottom right of the screen near the clock) indicating that "Your new hardware has been installed and is ready to use.

For Windows 2000
Click the Next button to continue.
Choose "Search for a suitable driver form my device (recommended)" and then click Next.
Select only the box next to "Specify a location" (clear all other check boxes) and click Next.
Click the browse button to locate the directory where the driver was extracted to in the steps above. The directory these files are extracted to will have a similar name to the file that was downloaded (i.e., c:\clj2550ps).
Click once on the directory name to highlight it and then select the Open button.
Autorun.inf should appear in the "file name" box. Click the Open button.
Select OK. The wizard will find the driver for the device.
Click the Next button.
Click Finish. Several dialogs will appear and then disappear.
The printer driver is now installed.
Compañía
Hewlett Packard
Dispositivo
Impresoras y Plotters
Modelo
Hewlett Packard HP Color LaserJet 2550Ln
Descripción
PCL6 Driver
Sistema Operativo
Windows 2000-2003-XP
Idioma
Greek
Versión Driver
60.34.78.41
Tamaño
5.5Mb
Nombre del archivo
clj2550pcl6win2kxp2003-el.exe
Información
Enhancements

Incorporated JPEG compression to reduce spool file size.
Resolves spoolsv.exe crash when printing some PowerPoint documents.
Control Panel simulator in the Services tab is now functional.

This section will help you in the download of the software to your computer and start you on the install process.
Before proceeding with the software installation, the printer must first be properly set up, and your computer must be ready to print.

DOWNLOAD AND EXTRACT THE SOFTWARE

Close any screen savers, virus protection programs, or other software programs running on your computer.
Click on Download Now and a File Download box will appear.
Select Save This Program to Disk and a Save As box will appear.
Select a directory to save the file in and click Save.
Locate the file using Windows Explorer when the download has completed.
Double click on the file. This will extract all the driver files into a directory on your hard drive. The directory these files are extracted to will have a similar name to the file that was downloaded (i.e., c:\clj2550pcl6). However, you can change the path and directory name at the time of extracting the file.
PLEASE USE THESE STEPS IF YOU ARE UPDATING THE HP COLOR LASERJET 2550 DRIVER
From the Windows XP desktop, click Start, and then Printers and Faxes (for Windows 2000, click Start, Settings and then Printers).
Right click on the hp color LaserJet 2550 PCL6 icon or listing, and then click Properties.
Click the Advanced tab.
Make certain the Driver box displays hp color LaserJet 2550 PCL6, and then click New Driver.
In the Add Printer Driver Wizard window, click Have Disk, and then Browse.
Browse to the directory that the downloaded files where unzipped to.

NOTE: The default directory would be C:\clj2550pcl6 (xx represents language, such as en for English)

The Look in box will display clj2550pcl6win2kxp2003-xx (xx represents language, such as en for English). Do not open any folders in this directory. The autorun.ini file should be in the File name box. Click Open.
On the Install From Disk window, click OK. The print driver name, hp color LaserJet 2550 PCL6, should be displayed. Click Next to continue.
When the update is finished, click OK to close the hp color LaserJet 2550 PCL6 Properties window. The update is now complete.
PLEASE USE THESE STEPS IF THIS IS A FIRST TIME INSTALLATION OF THE HP COLOR LASERJET 2550 DRIVER:
Attach a USB or parallel cable to the printer and the computer.
The "Found New Hardware Wizard" should appear. Note: If attaching via a parallel cable it may be necessary to restart the computer for the "Found New Hardware Wizard" to appear.
For Windows XP
Choose "Install from a list or specific location (advanced)" and then click Next.
Select only the box next to "Include this location in the search" (clear all other check boxes) then click the browse button to locate the directory where the driver was extracted to in the steps above. The directory these files are extracted to will have a similar name to the file that was downloaded (i.e., c:\clj2550pcl6).
Click once on the directory name to highlight it then choose OK. The directory path then appears in the dialog.
Select the Next button. Files will be copied to the appropriate directories automatically.
Click the Finish button within the "New Hardware Wizard"
After several moments and message will appear on the system tray (at the bottom right of the screen near the clock) indicating that "Your new hardware has been installed and is ready to use.

For Windows 2000
Click the Next button to continue.
Choose "Search for a suitable driver form my device (recommended)" and then click Next.
Select only the box next to "Specify a location" (clear all other check boxes) and click Next.
Click the browse button to locate the directory where the driver was extracted to in the steps above. The directory these files are extracted to will have a similar name to the file that was downloaded (i.e., c:\clj2550pcl6).
Click once on the directory name to highlight it and then select the Open button.
Autorun.inf should appear in the "file name" box. Click the Open button.
Select OK. The wizard will find the driver for the device.
Click the Next button.
Click Finish. Several dialogs will appear and then disappear.
The printer driver is now installed.
Compañía
Hewlett Packard
Dispositivo
Impresoras y Plotters
Modelo
Hewlett Packard HP Color LaserJet 2550Ln
Descripción
Universal Print Driver PCL 5
Sistema Operativo
Windows 2000-2003-XP-Vista
Idioma
Greek
Versión Driver
4.5
Tamaño
17.8Mb
Nombre del archivo
hpupd45pcl532.exe
Fecha
1 Apr 2008
Información
The UPD version 4.5 is the latest version of HP's Universal Print Driver. Please review the entire documentation for information on issues resolved, performance improvements, and new behavior changes to the UPD.
Compañía
Hewlett Packard
Dispositivo
Impresoras y Plotters
Modelo
Hewlett Packard HP Color LaserJet 2550Ln
Descripción
PCL6 Driver
Sistema Operativo
Windows 2000-2003-XP-Vista
Idioma
Greek
Versión Driver
4.5
Tamaño
18Mb
Nombre del archivo
hpupd45pcl632.exe
Fecha
1 Apr 2008
Información
The UPD version 4.5 is the latest version of HP's Universal Print Driver. Please review the entire documentation for information on issues resolved, performance improvements, and new behavior changes to the UPD.
Compañía
Hewlett Packard
Dispositivo
Impresoras y Plotters
Modelo
Hewlett Packard HP Color LaserJet 2550Ln
Descripción
Universal Print Driver PostScript
Sistema Operativo
Windows 2000-2003-XP-Vista
Idioma
Greek
Versión Driver
4.5
Tamaño
18.6Mb
Nombre del archivo
hpupd45ps32.exe
Fecha
1 Apr 2008
Información
The UPD version 4.5 is the latest version of HP's Universal Print Driver. Please review the entire documentation for information on issues resolved, performance improvements, and new behavior changes to the UPD.
Compañía
Hewlett Packard
Dispositivo
Impresoras y Plotters
Modelo
Hewlett Packard HP Color LaserJet 2550Ln
Descripción
Universal Print Driver x64 PostScript
Sistema Operativo
Windows 2003 64 bits-XP 64 bits-Vista 64 bits
Idioma
Greek
Versión Driver
4.5
Tamaño
19Mb
Nombre del archivo
hpupd45ps64.exe
Fecha
1 Apr 2008
Información
The UPD version 4.5 is the latest version of HP's Universal Print Driver. Please review the entire documentation for information on issues resolved, performance improvements, and new behavior changes to the UPD.
Compañía
Hewlett Packard
Dispositivo
Impresoras y Plotters
Modelo
Hewlett Packard HP Color LaserJet 2550Ln
Descripción
PCL5 Driver
Sistema Operativo
Windows 2003 64 bits-XP 64 bits-Vista 64 bits
Idioma
Greek
Versión Driver
4.5
Tamaño
18.2Mb
Nombre del archivo
hpupd45pcl564.exe
Fecha
1 Apr 2008
Información
The UPD version 4.5 is the latest version of HP's Universal Print Driver. Please review the entire documentation for information on issues resolved, performance improvements, and new behavior changes to the UPD.
Compañía
Hewlett Packard
Dispositivo
Impresoras y Plotters
Modelo
Hewlett Packard HP Color LaserJet 2550Ln
Descripción
PCL6 Driver
Sistema Operativo
Windows 2003 64 bits-XP 64 bits-Vista 64 bits
Idioma
Greek
Versión Driver
4.5
Tamaño
18.2Mb
Nombre del archivo
hpupd45pcl664.exe
Fecha
1 Apr 2008
Información
The UPD version 4.5 is the latest version of HP's Universal Print Driver. Please review the entire documentation for information on issues resolved, performance improvements, and new behavior changes to the UPD.
Compañía
Hewlett Packard
Dispositivo
Impresoras y Plotters
Modelo
Hewlett Packard HP Color LaserJet 2550Ln
Descripción
Firmware Update utility
Sistema Operativo
Windows 98-Me-2000-XP
Idioma
Greek
Versión Firmware
20040930
Tamaño
6.2Mb
Nombre del archivo
flash_5f2550_20040930_rev2.exe
Fecha
11 Oct 2004
Información
WARNING: Determine what the current firmware version of your printer is before downloading the update. If your printer already has the current version (20040930), downloading this file might cause possible performance issues. To determine the version of firmware of your HP Color LaserJet 2550 printer, print a Configuration Page by pressing the Go button (green) and the Cancel button (Red) on the printer's control panel. The firmware version is listed on the top left part of the page, under Product Information - Firmware Datecode.
Firmware Enhancements

These changes are implemented in the new version firmware 20040930:
Default screenmatch color treatment for non-driver PostScript jobs.
Enabled to set FONTSOURCE to a downloaded soft font via PJL.
Cyrillic/Greek/Hebrew font settings now available
Improved memory allocation for complex pages.
The default I/O timeout changed to 120 seconds.
Printing from Mac systems, and printing PDF files, will have an improved CMYK color adjustment.
Calibration will now occur on non-HP refilled cartridge that have the e-label set to "toner out".
Unexpected Paper Size messages are now bypassed by pressing Go or Cancel from the Toolbox utility.
The Supplies Status page will now include the part number for HP cartridges when recognizing a non-HP cartridge installed.
Monochrome print speed will increase by choosing "Print to Grayscale" in the driver's Color tab

Note: This utility is in English only.

* The HP Color LaserJet 2550 series Firmware Update Utility can be performed using either a Parallel or USB port.
When using the USB port, the HP Color LaserJet 2550 series software must be installed prior to using this utility.
When using the parallel port, the HP Color LaserJet 2550 series software does not need to be installed. Connect the 2550 series printer to a PC with the Firmware Update Utility loaded using a parallel cable.
* You will need 20MB of disk space to use the Firmware Update Utility.

* The HP Color LaserJet 2550 series printer must be in a READY state and remain powered on during the entire firmware update process.

* Administrator Privileges are required on the PC executing the utility.

* The control panel of the printer will display a series of flashing lights.

* After the Firmware Update Utility has finished, the HP Color LaserJet 2550 series printer will display a solid green Ready light (second from the bottom). Depending on the operating system on your PC, you may be prompted to reboot your computer.

This utility is for use on Windows 95, 98, ME, 2000 and XP. It can ONLY be used with parallel or USB connections.


Installation Instructions

* For users connected via the network, please temporarily disconnect your HP Color LaserJet 2550 series printer from the network to ensure the network devices to not interrupt the firmware upgrade process.

Parallel Cable connection
Connect a PC to the HP Color LaserJet 2550 series printer via a parallel cable.
You do not need to install the HP software for parallel upgrades.
If the "Add Hardware" wizard starts when you plug in the parallel cable, you can safely cancel it.
Double click the Flash Update utility.
Click 'OK' to begin the process. The utility will go through the following steps:
Close all toolbox and HP software running on the host PC.
Upload firmware to printer, at which point the printer lights will start flashing until complete.
Printer will then erase the old firmware and write the new firmware and reboot it.
Utility will prompt user to reboot PC (to synchronize the printer, restart Toolbox and the HP software)
DO NOT POWER CYCLE THE PRINTER during the upgrade process or it will leave your printer in an unusable state.
Once the utility is complete, it will prompt you to reboot your PC and printer to synchronize the printer and the HP Toolbox.
The firmware update can take up to 5 minutes to complete. Please be patient.
USB Connection
In order to use USB to update your printer, you must have the HP Color LaserJet 2550 series printer software installed on your PC.
You do NOT need to have toolbox installed. A driver only installation will work fine.
Ensure your HP Color LaserJet 2550 series printer is connected to the USB cable.
Double click the Flash Update utility.
Click 'OK' to begin the process. The utility will go through the following steps:
Close all Toolbox and HP software running on host PC.
Upload firmware to printer, at which point the printer lights will flash until complete.
Printer will then erase the old firmware and write the new firmware and reboot itself.
Utility will prompt user to reboot PC (to resync printer, restart toolbox and HP software)
DO NOT POWER CYCLE THE PRINTER during the upgrade process or it will leave your printer in an unusable state.
Once the utility is complete, it will prompt you to reboot your PC and printer to resync the printer and the HP Toolbox.
The firmware update can take up to 5 minutes to complete. Please be patient.
Compañía
Hewlett Packard
Dispositivo
Impresoras y Plotters
Modelo
Hewlett Packard HP Color LaserJet 2550Ln
Descripción
PCL6 Driver
Sistema Operativo
Windows NT4
Idioma
Greek
Versión Driver
4.24.2550.400
Tamaño
2.9Mb
Nombre del archivo
clj2550pcl6winnt4-el.exe
Información
This section will help you in the download of the software to your computer and start you on the install process.
Before proceeding with the software installation, the printer must first be properly set up, and your computer must be ready to print.
Turn on the printer first, then turn on the computer.
Close any screen savers, virus protection programs, or other software programs running on your computer.
Click on Download Now and a File Download box will appear.
Select Save This Program to Disk and a Save As box will appear.
Select a directory to save the file in and click Save.
Locate the file using Windows Explorer when the download has completed.
Double click on the file. This will extract all the driver files into a directory on your hard drive. The directory these files are extracted to will have a similar name to the file that was downloaded (i.e., c:\clj2550pcl6). However, you can change the path and directory name at the time of extracting the file.
Open the Printers Window (Click Start-Settings-Printers).
Update the printer if it was previously installed
Right click on the printer and select Properties from the pop menu.
On the General tab, select New Driver.
Click on the Warning Box that pops up.
A printer listing box will appear. Select Have Disk.
Another box Install from Disk appears.
Click the Browse to locate the expanded files directory (i.e., c:\clj2550pcl6).
Click on the file ending with .inf .
Click Open and then OK and let files install.
Add the printer if it hasn't been installed yet.
Click Add New Printer
Follow the instructions of the Add Printer Wizard.
Compañía
Hewlett Packard
Dispositivo
Impresoras y Plotters
Modelo
Hewlett Packard HP Color LaserJet 2550Ln
Descripción
PostScript Driver
Sistema Operativo
Windows NT4
Idioma
Greek
Versión Driver
034.4100
Tamaño
1Mb
Nombre del archivo
clj2550pswinnt4-el.exe
Información
This section will help you in the download of the software to your computer and start you on the install process.
Before proceeding with the software installation, the printer must first be properly set up, and your computer must be ready to print.
Turn on the printer first, then turn on the computer.
Close any screen savers, virus protection programs, or other software programs running on your computer.
Click on Download Now and a File Download box will appear.
Select Save This Program to Disk and a Save As box will appear.
Select a directory to save the file in and click Save.
Locate the file using Windows Explorer when the download has completed.
Double click on the file. This will extract all the driver files into a directory on your hard drive. The directory these files are extracted to will have a similar name to the file that was downloaded (i.e., c:\clj2550ps). However, you can change the path and directory name at the time of extracting the file.
Open the Printers Window (Click Start-Settings-Printers).
Update the printer if it was previously installed
Right click on the printer and select Properties from the pop menu.
On the General tab, select New Driver.
Click on the Warning Box that pops up.
A printer listing box will appear. Select Have Disk.
Another box Install from Disk appears.
Click the Browse to locate the expanded files directory (i.e., c:\clj2550ps).
Click on the file ending with .inf .
Click Open and then OK and let files install.
Add the printer if it hasn't been installed yet.
Click Add New Printer
Follow the instructions of the Add Printer Wizard.
Compañía
Hewlett Packard
Dispositivo
Impresoras y Plotters
Modelo
Hewlett Packard HP Color LaserJet 2550Ln
Descripción
Removal Tool
Sistema Operativo
Windows NT4-2000-XP
Idioma
Greek
Versión Driver
1.0.0.1
Tamaño
316Kb
Nombre del archivo
setconfig_exermtool.exe
Fecha
3 Jun 2005
Información
Download Info
If the following error message is encountered, please install this file for resolution.

This error message may occur with the following Hewlett-Packard LaserJet devices:
LaserJet 1010/1012/1015 Series
LaserJet 1150
LaserJet 1160
LaserJet 1300 Series
LaserJet 1320 Series
LaserJet 3015/3020/3030/3380 Series
Color LaserJet 2550
Note: If the error is encountered, it will be after the initial printer software install and upon consequential system reboots.

This section will help you in the download of the software to your computer and start you on the install process.
Close any screen savers, virus protection programs, or other software programs running on your computer.
Click on Download and a File Download box will appear.
Select Save This Program to Disk and a Save As box will appear.
Select a directory to save the file in and click Save.
Locate the file using Windows Explorer when the download has completed.
Double click on the file. It will execute and install the necessary files.




Compañía
Hewlett Packard
Dispositivo
Impresoras y Plotters
Modelo
Hewlett Packard HP Color LaserJet 2550Ln
Descripción
Firmware Update utility
Sistema Operativo
Mac OS X
Idioma
Hebrew
Versión Firmware
20040930
Tamaño
5.6Mb
Nombre del archivo
2550_fw_update20040930.dmg
Fecha
28 Jul 2005
Información
WARNING: Determine what the current firmware version of your printer is before downloading the update. If your printer already has the current version (20040930), downloading this file might cause possible performance issues. To determine the version of firmware of your HP Color LaserJet 2550 printer, print a Configuration Page by pressing the Go button (green) and the Cancel button (Red) on the printer's control panel. The firmware version is listed on the top left part of the page, under Product Information - Firmware Datecode.

Firmware Enhancements

These changes are implemented in the new version firmware 20040930:
Default screenmatch color treatment for non-driver PostScript jobs.
Enabled to set FONTSOURCE to a downloaded soft font via PJL.
Cyrillic/Greek/Hebrew font settings now available
Improved memory allocation for complex pages.
The default I/O timeout changed to 120 seconds.
Printing from Mac systems, and printing PDF files, will have an improved CMYK color adjustment.
Calibration will now occur on non-HP refilled cartridge that have the e-label set to "toner out".
Unexpected Paper Size messages are now bypassed by pressing Go or Cancel from the Toolbox utility.
The Supplies Status page will now include the part number for HP cartridges when recognizing a non-HP cartridge installed.
Monochrome print speed will increase by choosing "Print to Grayscale" in the driver's Color tab.

Note: This utility is in English only.

* You will need 20MB of disk space to use the Firmware Update Utility.

* The HP Color LaserJet 2550 series printer must be in a READY state and remain powered on during the entire firmware update process.

* The control panel of the printer will display a series of flashing lights.

* After the Firmware Update Utility has finished, the HP Color LaserJet 2550 series printer will display a solid green Ready light (second from the bottom). You may be prompted to reboot your computer.


Installation Instructions

(NOTE! If you use Internet Explorer to download the utility, it may strip the .dmg extension to the file. Simply re-add the .dmg extension and MAC OS X should recognize the file as a disk image)

This utility is for use on any OS X 10.2 or 10.3 Mac. It will NOT function in the MAC OS 9 environment.

It can only be used with a USB connection to the HP Color LaserJet 2550.

Instructions for upgrade

* For users connected via the network, please temporarily disconnect your HP Color LaserJet 2550 series printer from the network to ensure the network devices to not interrupt the FW upgrade process.
Mount the disk image containing the FW update.
Run the FW Update Application contained in the disk image.
Follow the onscreen prompts to continue.
When prompted, connect the printer via USB.
Upon finding an HP Color LaserJet 2550 series printer, the utility will prompt you to reboot the printer by simply turn the power off and back on. This ensures the printer is in a proper state to receive the update.
Once the printer has been rebooted, the utility will allow you to 'download' the firmware to the HP Color LaserJet 2550 series printer.
DO NOT POWER CYCLE THE PRINTER during the upgrade process or it will leave your printer in an unusable state.
One green LED will start flashing initially followed by 2 LED's flashing.
Once the LEDS stop flashing, the printer has updated and re-initialized, the firmware should be updated.
The firmware update can take up to 5 minutes to complete. Please be patient.
Compañía
Hewlett Packard
Dispositivo
Impresoras y Plotters
Modelo
Hewlett Packard HP Color LaserJet 2550Ln
Descripción
PCL6 Driver
Sistema Operativo
Windows 2000-2003-XP
Idioma
Hebrew
Versión Driver
60.34.78.41
Tamaño
5.5Mb
Nombre del archivo
clj2550pcl6win2kxp2003-he.exe
Información
Enhancements

Incorporated JPEG compression to reduce spool file size.
Resolves spoolsv.exe crash when printing some PowerPoint documents.
Control Panel simulator in the Services tab is now functional.

This section will help you in the download of the software to your computer and start you on the install process.
Before proceeding with the software installation, the printer must first be properly set up, and your computer must be ready to print.

DOWNLOAD AND EXTRACT THE SOFTWARE

Close any screen savers, virus protection programs, or other software programs running on your computer.
Click on Download Now and a File Download box will appear.
Select Save This Program to Disk and a Save As box will appear.
Select a directory to save the file in and click Save.
Locate the file using Windows Explorer when the download has completed.
Double click on the file. This will extract all the driver files into a directory on your hard drive. The directory these files are extracted to will have a similar name to the file that was downloaded (i.e., c:\clj2550pcl6). However, you can change the path and directory name at the time of extracting the file.
PLEASE USE THESE STEPS IF YOU ARE UPDATING THE HP COLOR LASERJET 2550 DRIVER
From the Windows XP desktop, click Start, and then Printers and Faxes (for Windows 2000, click Start, Settings and then Printers).
Right click on the hp color LaserJet 2550 PCL6 icon or listing, and then click Properties.
Click the Advanced tab.
Make certain the Driver box displays hp color LaserJet 2550 PCL6, and then click New Driver.
In the Add Printer Driver Wizard window, click Have Disk, and then Browse.
Browse to the directory that the downloaded files where unzipped to.

NOTE: The default directory would be C:\clj2550pcl6 (xx represents language, such as en for English)

The Look in box will display clj2550pcl6win2kxp2003-xx (xx represents language, such as en for English). Do not open any folders in this directory. The autorun.ini file should be in the File name box. Click Open.
On the Install From Disk window, click OK. The print driver name, hp color LaserJet 2550 PCL6, should be displayed. Click Next to continue.
When the update is finished, click OK to close the hp color LaserJet 2550 PCL6 Properties window. The update is now complete.
PLEASE USE THESE STEPS IF THIS IS A FIRST TIME INSTALLATION OF THE HP COLOR LASERJET 2550 DRIVER:
Attach a USB or parallel cable to the printer and the computer.
The "Found New Hardware Wizard" should appear. Note: If attaching via a parallel cable it may be necessary to restart the computer for the "Found New Hardware Wizard" to appear.
For Windows XP
Choose "Install from a list or specific location (advanced)" and then click Next.
Select only the box next to "Include this location in the search" (clear all other check boxes) then click the browse button to locate the directory where the driver was extracted to in the steps above. The directory these files are extracted to will have a similar name to the file that was downloaded (i.e., c:\clj2550pcl6).
Click once on the directory name to highlight it then choose OK. The directory path then appears in the dialog.
Select the Next button. Files will be copied to the appropriate directories automatically.
Click the Finish button within the "New Hardware Wizard"
After several moments and message will appear on the system tray (at the bottom right of the screen near the clock) indicating that "Your new hardware has been installed and is ready to use.

For Windows 2000
Click the Next button to continue.
Choose "Search for a suitable driver form my device (recommended)" and then click Next.
Select only the box next to "Specify a location" (clear all other check boxes) and click Next.
Click the browse button to locate the directory where the driver was extracted to in the steps above. The directory these files are extracted to will have a similar name to the file that was downloaded (i.e., c:\clj2550pcl6).
Click once on the directory name to highlight it and then select the Open button.
Autorun.inf should appear in the "file name" box. Click the Open button.
Select OK. The wizard will find the driver for the device.
Click the Next button.
Click Finish. Several dialogs will appear and then disappear.
The printer driver is now installed.
Compañía
Hewlett Packard
Dispositivo
Impresoras y Plotters
Modelo
Hewlett Packard HP Color LaserJet 2550Ln
Descripción
PostScript Driver
Sistema Operativo
Windows 2000-2003-XP
Idioma
Hebrew
Versión Driver
60.34.78.41
Tamaño
5.3Mb
Nombre del archivo
clj2550pswin2kxp2003-he.exe
Información
Enhancements

Incorporated JPEG compression to reduce spool file size.
Resolves spoolsv.exe crash when printing some PowerPoint documents.
Control Panel simulator in the Services tab is now functional.

This section will help you in the download of the software to your computer and start you on the install process.
Before proceeding with the software installation, the printer must first be properly set up, and your computer must be ready to print.

DOWNLOAD AND EXTRACT THE SOFTWARE

Close any screen savers, virus protection programs, or other software programs running on your computer.
Click on Download Now and a File Download box will appear.
Select Save This Program to Disk and a Save As box will appear.
Select a directory to save the file in and click Save.
Locate the file using Windows Explorer when the download has completed.
Double click on the file. This will extract all the driver files into a directory on your hard drive. The directory these files are extracted to will have a similar name to the file that was downloaded (i.e., c:\clj2550ps). However, you can change the path and directory name at the time of extracting the file.
PLEASE USE THESE STEPS IF YOU ARE UPDATING THE HP COLOR LASERJET 2550 DRIVER
From the Windows XP desktop, click Start, and then Printers and Faxes (for Windows 2000, click Start, Settings and then Printers).
Right click on the hp color LaserJet 2550 PostScript icon or listing, and then click Properties.
Click the Advanced tab.
Make certain the Driver box displays hp color LaserJet 2550 PostScript, and then click New Driver.
In the Add Printer Driver Wizard window, click Have Disk, and then Browse.
Browse to the directory that the downloaded files where unzipped to.

NOTE: The default directory would be c:\clj2550pswin2kxp2003-xx (xx represents language, such as en for English)

The Look in box will display clj2550pswin2kxp2003-xx (xx represents language, such as en for English). Do not open any folders in this directory. The autorun.ini file should be in the File name box. Click Open.
On the Install From Disk window, click OK. The print driver name, hp color LaserJet 2550 PostScript, should be displayed. Click Next to continue.
When the update is finished, click OK to close the hp color LaserJet 2550 PostScript Properties window. The update is now complete.
PLEASE USE THESE STEPS IF THIS IS A FIRST TIME INSTALLATION OF THE HP COLOR LASERJET 2550 DRIVER:
Attach a USB or parallel cable to the printer and the computer.
The "Found New Hardware Wizard" should appear. Note: If attaching via a parallel cable it may be necessary to restart the computer for the "Found New Hardware Wizard" to appear.
For Windows XP
Choose "Install from a list or specific location (advanced)" and then click Next.
Select only the box next to "Include this location in the search" (clear all other check boxes) then click the browse button to locate the directory where the driver was extracted to in the steps above. The directory these files are extracted to will have a similar name to the file that was downloaded (i.e., c:\clj2550ps).
Click once on the directory name to highlight it then choose OK. The directory path then appears in the dialog.
Select the Next button. Files will be copied to the appropriate directories automatically.
Click the Finish button within the "New Hardware Wizard"
After several moments and message will appear on the system tray (at the bottom right of the screen near the clock) indicating that "Your new hardware has been installed and is ready to use.

For Windows 2000
Click the Next button to continue.
Choose "Search for a suitable driver form my device (recommended)" and then click Next.
Select only the box next to "Specify a location" (clear all other check boxes) and click Next.
Click the browse button to locate the directory where the driver was extracted to in the steps above. The directory these files are extracted to will have a similar name to the file that was downloaded (i.e., c:\clj2550ps).
Click once on the directory name to highlight it and then select the Open button.
Autorun.inf should appear in the "file name" box. Click the Open button.
Select OK. The wizard will find the driver for the device.
Click the Next button.
Click Finish. Several dialogs will appear and then disappear.
The printer driver is now installed.
Compañía
Hewlett Packard
Dispositivo
Impresoras y Plotters
Modelo
Hewlett Packard HP Color LaserJet 2550Ln
Descripción
PCL6 Driver
Sistema Operativo
Windows 2000-2003-XP-Vista
Idioma
Hebrew
Versión Driver
4.5
Tamaño
18Mb
Nombre del archivo
hpupd45pcl632.exe
Fecha
1 Apr 2008
Información
The UPD version 4.5 is the latest version of HP's Universal Print Driver. Please review the entire documentation for information on issues resolved, performance improvements, and new behavior changes to the UPD.
Compañía
Hewlett Packard
Dispositivo
Impresoras y Plotters
Modelo
Hewlett Packard HP Color LaserJet 2550Ln
Descripción
Universal Print Driver PCL 5
Sistema Operativo
Windows 2000-2003-XP-Vista
Idioma
Hebrew
Versión Driver
4.5
Tamaño
17.8Mb
Nombre del archivo
hpupd45pcl532.exe
Fecha
1 Apr 2008
Información
The UPD version 4.5 is the latest version of HP's Universal Print Driver. Please review the entire documentation for information on issues resolved, performance improvements, and new behavior changes to the UPD.
Compañía
Hewlett Packard
Dispositivo
Impresoras y Plotters
Modelo
Hewlett Packard HP Color LaserJet 2550Ln
Descripción
Universal Print Driver PostScript
Sistema Operativo
Windows 2000-2003-XP-Vista
Idioma
Hebrew
Versión Driver
4.5
Tamaño
18.6Mb
Nombre del archivo
hpupd45ps32.exe
Fecha
1 Apr 2008
Información
The UPD version 4.5 is the latest version of HP's Universal Print Driver. Please review the entire documentation for information on issues resolved, performance improvements, and new behavior changes to the UPD.
Compañía
Hewlett Packard
Dispositivo
Impresoras y Plotters
Modelo
Hewlett Packard HP Color LaserJet 2550Ln
Descripción
Universal Print Driver x64 PostScript
Sistema Operativo
Windows 2003 64 bits-XP 64 bits-Vista 64 bits
Idioma
Hebrew
Versión Driver
4.5
Tamaño
19Mb
Nombre del archivo
hpupd45ps64.exe
Fecha
1 Apr 2008
Información
The UPD version 4.5 is the latest version of HP's Universal Print Driver. Please review the entire documentation for information on issues resolved, performance improvements, and new behavior changes to the UPD.
Compañía
Hewlett Packard
Dispositivo
Impresoras y Plotters
Modelo
Hewlett Packard HP Color LaserJet 2550Ln
Descripción
PCL5 Driver
Sistema Operativo
Windows 2003 64 bits-XP 64 bits-Vista 64 bits
Idioma
Hebrew
Versión Driver
4.5
Tamaño
18.2Mb
Nombre del archivo
hpupd45pcl564.exe
Fecha
1 Apr 2008
Información
The UPD version 4.5 is the latest version of HP's Universal Print Driver. Please review the entire documentation for information on issues resolved, performance improvements, and new behavior changes to the UPD.
Compañía
Hewlett Packard
Dispositivo
Impresoras y Plotters
Modelo
Hewlett Packard HP Color LaserJet 2550Ln
Descripción
PCL6 Driver
Sistema Operativo
Windows 2003 64 bits-XP 64 bits-Vista 64 bits
Idioma
Hebrew
Versión Driver
4.5
Tamaño
18.2Mb
Nombre del archivo
hpupd45pcl664.exe
Fecha
1 Apr 2008
Información
The UPD version 4.5 is the latest version of HP's Universal Print Driver. Please review the entire documentation for information on issues resolved, performance improvements, and new behavior changes to the UPD.
Compañía
Hewlett Packard
Dispositivo
Impresoras y Plotters
Modelo
Hewlett Packard HP Color LaserJet 2550Ln
Descripción
Firmware Update utility
Sistema Operativo
Windows 98-Me-2000-XP
Idioma
Hebrew
Versión Firmware
20040930
Tamaño
6.2Mb
Nombre del archivo
flash_5f2550_20040930_rev2.exe
Fecha
11 Oct 2004
Información
WARNING: Determine what the current firmware version of your printer is before downloading the update. If your printer already has the current version (20040930), downloading this file might cause possible performance issues. To determine the version of firmware of your HP Color LaserJet 2550 printer, print a Configuration Page by pressing the Go button (green) and the Cancel button (Red) on the printer's control panel. The firmware version is listed on the top left part of the page, under Product Information - Firmware Datecode.
Firmware Enhancements

These changes are implemented in the new version firmware 20040930:
Default screenmatch color treatment for non-driver PostScript jobs.
Enabled to set FONTSOURCE to a downloaded soft font via PJL.
Cyrillic/Greek/Hebrew font settings now available
Improved memory allocation for complex pages.
The default I/O timeout changed to 120 seconds.
Printing from Mac systems, and printing PDF files, will have an improved CMYK color adjustment.
Calibration will now occur on non-HP refilled cartridge that have the e-label set to "toner out".
Unexpected Paper Size messages are now bypassed by pressing Go or Cancel from the Toolbox utility.
The Supplies Status page will now include the part number for HP cartridges when recognizing a non-HP cartridge installed.
Monochrome print speed will increase by choosing "Print to Grayscale" in the driver's Color tab

Note: This utility is in English only.

* The HP Color LaserJet 2550 series Firmware Update Utility can be performed using either a Parallel or USB port.
When using the USB port, the HP Color LaserJet 2550 series software must be installed prior to using this utility.
When using the parallel port, the HP Color LaserJet 2550 series software does not need to be installed. Connect the 2550 series printer to a PC with the Firmware Update Utility loaded using a parallel cable.
* You will need 20MB of disk space to use the Firmware Update Utility.

* The HP Color LaserJet 2550 series printer must be in a READY state and remain powered on during the entire firmware update process.

* Administrator Privileges are required on the PC executing the utility.

* The control panel of the printer will display a series of flashing lights.

* After the Firmware Update Utility has finished, the HP Color LaserJet 2550 series printer will display a solid green Ready light (second from the bottom). Depending on the operating system on your PC, you may be prompted to reboot your computer.

This utility is for use on Windows 95, 98, ME, 2000 and XP. It can ONLY be used with parallel or USB connections.


Installation Instructions

* For users connected via the network, please temporarily disconnect your HP Color LaserJet 2550 series printer from the network to ensure the network devices to not interrupt the firmware upgrade process.

Parallel Cable connection
Connect a PC to the HP Color LaserJet 2550 series printer via a parallel cable.
You do not need to install the HP software for parallel upgrades.
If the "Add Hardware" wizard starts when you plug in the parallel cable, you can safely cancel it.
Double click the Flash Update utility.
Click 'OK' to begin the process. The utility will go through the following steps:
Close all toolbox and HP software running on the host PC.
Upload firmware to printer, at which point the printer lights will start flashing until complete.
Printer will then erase the old firmware and write the new firmware and reboot it.
Utility will prompt user to reboot PC (to synchronize the printer, restart Toolbox and the HP software)
DO NOT POWER CYCLE THE PRINTER during the upgrade process or it will leave your printer in an unusable state.
Once the utility is complete, it will prompt you to reboot your PC and printer to synchronize the printer and the HP Toolbox.
The firmware update can take up to 5 minutes to complete. Please be patient.
USB Connection
In order to use USB to update your printer, you must have the HP Color LaserJet 2550 series printer software installed on your PC.
You do NOT need to have toolbox installed. A driver only installation will work fine.
Ensure your HP Color LaserJet 2550 series printer is connected to the USB cable.
Double click the Flash Update utility.
Click 'OK' to begin the process. The utility will go through the following steps:
Close all Toolbox and HP software running on host PC.
Upload firmware to printer, at which point the printer lights will flash until complete.
Printer will then erase the old firmware and write the new firmware and reboot itself.
Utility will prompt user to reboot PC (to resync printer, restart toolbox and HP software)
DO NOT POWER CYCLE THE PRINTER during the upgrade process or it will leave your printer in an unusable state.
Once the utility is complete, it will prompt you to reboot your PC and printer to resync the printer and the HP Toolbox.
The firmware update can take up to 5 minutes to complete. Please be patient.
Compañía
Hewlett Packard
Dispositivo
Impresoras y Plotters
Modelo
Hewlett Packard HP Color LaserJet 2550Ln
Descripción
PostScript Driver
Sistema Operativo
Windows NT4
Idioma
Hebrew
Versión Driver
034.4100
Tamaño
1Mb
Nombre del archivo
clj2550pswinnt4-he.exe
Información
This section will help you in the download of the software to your computer and start you on the install process.
Before proceeding with the software installation, the printer must first be properly set up, and your computer must be ready to print.
Turn on the printer first, then turn on the computer.
Close any screen savers, virus protection programs, or other software programs running on your computer.
Click on Download Now and a File Download box will appear.
Select Save This Program to Disk and a Save As box will appear.
Select a directory to save the file in and click Save.
Locate the file using Windows Explorer when the download has completed.
Double click on the file. This will extract all the driver files into a directory on your hard drive. The directory these files are extracted to will have a similar name to the file that was downloaded (i.e., c:\clj2550ps). However, you can change the path and directory name at the time of extracting the file.
Open the Printers Window (Click Start-Settings-Printers).
Update the printer if it was previously installed
Right click on the printer and select Properties from the pop menu.
On the General tab, select New Driver.
Click on the Warning Box that pops up.
A printer listing box will appear. Select Have Disk.
Another box Install from Disk appears.
Click the Browse to locate the expanded files directory (i.e., c:\clj2550ps).
Click on the file ending with .inf .
Click Open and then OK and let files install.
Add the printer if it hasn't been installed yet.
Click Add New Printer
Follow the instructions of the Add Printer Wizard.
Compañía
Hewlett Packard
Dispositivo
Impresoras y Plotters
Modelo
Hewlett Packard HP Color LaserJet 2550Ln
Descripción
PCL6 Driver
Sistema Operativo
Windows NT4
Idioma
Hebrew
Versión Driver
4.24.2550.400
Tamaño
2.9Mb
Nombre del archivo
clj2550pcl6winnt4-he.exe
Información
This section will help you in the download of the software to your computer and start you on the install process.
Before proceeding with the software installation, the printer must first be properly set up, and your computer must be ready to print.
Turn on the printer first, then turn on the computer.
Close any screen savers, virus protection programs, or other software programs running on your computer.
Click on Download Now and a File Download box will appear.
Select Save This Program to Disk and a Save As box will appear.
Select a directory to save the file in and click Save.
Locate the file using Windows Explorer when the download has completed.
Double click on the file. This will extract all the driver files into a directory on your hard drive. The directory these files are extracted to will have a similar name to the file that was downloaded (i.e., c:\clj2550pcl6). However, you can change the path and directory name at the time of extracting the file.
Open the Printers Window (Click Start-Settings-Printers).
Update the printer if it was previously installed
Right click on the printer and select Properties from the pop menu.
On the General tab, select New Driver.
Click on the Warning Box that pops up.
A printer listing box will appear. Select Have Disk.
Another box Install from Disk appears.
Click the Browse to locate the expanded files directory (i.e., c:\clj2550pcl6).
Click on the file ending with .inf .
Click Open and then OK and let files install.
Add the printer if it hasn't been installed yet.
Click Add New Printer
Follow the instructions of the Add Printer Wizard.
Compañía
Hewlett Packard
Dispositivo
Impresoras y Plotters
Modelo
Hewlett Packard HP Color LaserJet 2550Ln
Descripción
Removal Tool
Sistema Operativo
Windows NT4-2000-XP
Idioma
Hebrew
Versión Driver
1.0.0.1
Tamaño
316Kb
Nombre del archivo
setconfig_exermtool.exe
Fecha
3 Jun 2005
Información
Download Info
If the following error message is encountered, please install this file for resolution.

This error message may occur with the following Hewlett-Packard LaserJet devices:
LaserJet 1010/1012/1015 Series
LaserJet 1150
LaserJet 1160
LaserJet 1300 Series
LaserJet 1320 Series
LaserJet 3015/3020/3030/3380 Series
Color LaserJet 2550
Note: If the error is encountered, it will be after the initial printer software install and upon consequential system reboots.

This section will help you in the download of the software to your computer and start you on the install process.
Close any screen savers, virus protection programs, or other software programs running on your computer.
Click on Download and a File Download box will appear.
Select Save This Program to Disk and a Save As box will appear.
Select a directory to save the file in and click Save.
Locate the file using Windows Explorer when the download has completed.
Double click on the file. It will execute and install the necessary files.




Compañía
Hewlett Packard
Dispositivo
Impresoras y Plotters
Modelo
Hewlett Packard HP Color LaserJet 2550Ln
Descripción
Firmware Update utility
Sistema Operativo
Mac OS X
Idioma
Hungarian
Versión Firmware
20040930
Tamaño
5.6Mb
Nombre del archivo
2550_fw_update20040930.dmg
Fecha
28 Jul 2005
Información
WARNING: Determine what the current firmware version of your printer is before downloading the update. If your printer already has the current version (20040930), downloading this file might cause possible performance issues. To determine the version of firmware of your HP Color LaserJet 2550 printer, print a Configuration Page by pressing the Go button (green) and the Cancel button (Red) on the printer's control panel. The firmware version is listed on the top left part of the page, under Product Information - Firmware Datecode.

Firmware Enhancements

These changes are implemented in the new version firmware 20040930:
Default screenmatch color treatment for non-driver PostScript jobs.
Enabled to set FONTSOURCE to a downloaded soft font via PJL.
Cyrillic/Greek/Hebrew font settings now available
Improved memory allocation for complex pages.
The default I/O timeout changed to 120 seconds.
Printing from Mac systems, and printing PDF files, will have an improved CMYK color adjustment.
Calibration will now occur on non-HP refilled cartridge that have the e-label set to "toner out".
Unexpected Paper Size messages are now bypassed by pressing Go or Cancel from the Toolbox utility.
The Supplies Status page will now include the part number for HP cartridges when recognizing a non-HP cartridge installed.
Monochrome print speed will increase by choosing "Print to Grayscale" in the driver's Color tab.

Note: This utility is in English only.

* You will need 20MB of disk space to use the Firmware Update Utility.

* The HP Color LaserJet 2550 series printer must be in a READY state and remain powered on during the entire firmware update process.

* The control panel of the printer will display a series of flashing lights.

* After the Firmware Update Utility has finished, the HP Color LaserJet 2550 series printer will display a solid green Ready light (second from the bottom). You may be prompted to reboot your computer.


Installation Instructions

(NOTE! If you use Internet Explorer to download the utility, it may strip the .dmg extension to the file. Simply re-add the .dmg extension and MAC OS X should recognize the file as a disk image)

This utility is for use on any OS X 10.2 or 10.3 Mac. It will NOT function in the MAC OS 9 environment.

It can only be used with a USB connection to the HP Color LaserJet 2550.

Instructions for upgrade

* For users connected via the network, please temporarily disconnect your HP Color LaserJet 2550 series printer from the network to ensure the network devices to not interrupt the FW upgrade process.
Mount the disk image containing the FW update.
Run the FW Update Application contained in the disk image.
Follow the onscreen prompts to continue.
When prompted, connect the printer via USB.
Upon finding an HP Color LaserJet 2550 series printer, the utility will prompt you to reboot the printer by simply turn the power off and back on. This ensures the printer is in a proper state to receive the update.
Once the printer has been rebooted, the utility will allow you to 'download' the firmware to the HP Color LaserJet 2550 series printer.
DO NOT POWER CYCLE THE PRINTER during the upgrade process or it will leave your printer in an unusable state.
One green LED will start flashing initially followed by 2 LED's flashing.
Once the LEDS stop flashing, the printer has updated and re-initialized, the firmware should be updated.
The firmware update can take up to 5 minutes to complete. Please be patient.
Compañía
Hewlett Packard
Dispositivo
Impresoras y Plotters
Modelo
Hewlett Packard HP Color LaserJet 2550Ln
Descripción
PCL6 Driver
Sistema Operativo
Windows 2000-2003-XP
Idioma
Hungarian
Versión Driver
60.34.78.41
Tamaño
5.5Mb
Nombre del archivo
clj2550pcl6win2kxp2003-hu.exe
Información
Enhancements

Incorporated JPEG compression to reduce spool file size.
Resolves spoolsv.exe crash when printing some PowerPoint documents.
Control Panel simulator in the Services tab is now functional.

This section will help you in the download of the software to your computer and start you on the install process.
Before proceeding with the software installation, the printer must first be properly set up, and your computer must be ready to print.

DOWNLOAD AND EXTRACT THE SOFTWARE

Close any screen savers, virus protection programs, or other software programs running on your computer.
Click on Download Now and a File Download box will appear.
Select Save This Program to Disk and a Save As box will appear.
Select a directory to save the file in and click Save.
Locate the file using Windows Explorer when the download has completed.
Double click on the file. This will extract all the driver files into a directory on your hard drive. The directory these files are extracted to will have a similar name to the file that was downloaded (i.e., c:\clj2550pcl6). However, you can change the path and directory name at the time of extracting the file.
PLEASE USE THESE STEPS IF YOU ARE UPDATING THE HP COLOR LASERJET 2550 DRIVER
From the Windows XP desktop, click Start, and then Printers and Faxes (for Windows 2000, click Start, Settings and then Printers).
Right click on the hp color LaserJet 2550 PCL6 icon or listing, and then click Properties.
Click the Advanced tab.
Make certain the Driver box displays hp color LaserJet 2550 PCL6, and then click New Driver.
In the Add Printer Driver Wizard window, click Have Disk, and then Browse.
Browse to the directory that the downloaded files where unzipped to.

NOTE: The default directory would be C:\clj2550pcl6 (xx represents language, such as en for English)

The Look in box will display clj2550pcl6win2kxp2003-xx (xx represents language, such as en for English). Do not open any folders in this directory. The autorun.ini file should be in the File name box. Click Open.
On the Install From Disk window, click OK. The print driver name, hp color LaserJet 2550 PCL6, should be displayed. Click Next to continue.
When the update is finished, click OK to close the hp color LaserJet 2550 PCL6 Properties window. The update is now complete.
PLEASE USE THESE STEPS IF THIS IS A FIRST TIME INSTALLATION OF THE HP COLOR LASERJET 2550 DRIVER:
Attach a USB or parallel cable to the printer and the computer.
The "Found New Hardware Wizard" should appear. Note: If attaching via a parallel cable it may be necessary to restart the computer for the "Found New Hardware Wizard" to appear.
For Windows XP
Choose "Install from a list or specific location (advanced)" and then click Next.
Select only the box next to "Include this location in the search" (clear all other check boxes) then click the browse button to locate the directory where the driver was extracted to in the steps above. The directory these files are extracted to will have a similar name to the file that was downloaded (i.e., c:\clj2550pcl6).
Click once on the directory name to highlight it then choose OK. The directory path then appears in the dialog.
Select the Next button. Files will be copied to the appropriate directories automatically.
Click the Finish button within the "New Hardware Wizard"
After several moments and message will appear on the system tray (at the bottom right of the screen near the clock) indicating that "Your new hardware has been installed and is ready to use.

For Windows 2000
Click the Next button to continue.
Choose "Search for a suitable driver form my device (recommended)" and then click Next.
Select only the box next to "Specify a location" (clear all other check boxes) and click Next.
Click the browse button to locate the directory where the driver was extracted to in the steps above. The directory these files are extracted to will have a similar name to the file that was downloaded (i.e., c:\clj2550pcl6).
Click once on the directory name to highlight it and then select the Open button.
Autorun.inf should appear in the "file name" box. Click the Open button.
Select OK. The wizard will find the driver for the device.
Click the Next button.
Click Finish. Several dialogs will appear and then disappear.
The printer driver is now installed.
Compañía
Hewlett Packard
Dispositivo
Impresoras y Plotters
Modelo
Hewlett Packard HP Color LaserJet 2550Ln
Descripción
PostScript Driver
Sistema Operativo
Windows 2000-2003-XP
Idioma
Hungarian
Versión Driver
60.34.78.41
Tamaño
5.3Mb
Nombre del archivo
clj2550pswin2kxp2003-hu.exe
Información
Enhancements

Incorporated JPEG compression to reduce spool file size.
Resolves spoolsv.exe crash when printing some PowerPoint documents.
Control Panel simulator in the Services tab is now functional.

This section will help you in the download of the software to your computer and start you on the install process.
Before proceeding with the software installation, the printer must first be properly set up, and your computer must be ready to print.

DOWNLOAD AND EXTRACT THE SOFTWARE

Close any screen savers, virus protection programs, or other software programs running on your computer.
Click on Download Now and a File Download box will appear.
Select Save This Program to Disk and a Save As box will appear.
Select a directory to save the file in and click Save.
Locate the file using Windows Explorer when the download has completed.
Double click on the file. This will extract all the driver files into a directory on your hard drive. The directory these files are extracted to will have a similar name to the file that was downloaded (i.e., c:\clj2550ps). However, you can change the path and directory name at the time of extracting the file.
PLEASE USE THESE STEPS IF YOU ARE UPDATING THE HP COLOR LASERJET 2550 DRIVER
From the Windows XP desktop, click Start, and then Printers and Faxes (for Windows 2000, click Start, Settings and then Printers).
Right click on the hp color LaserJet 2550 PostScript icon or listing, and then click Properties.
Click the Advanced tab.
Make certain the Driver box displays hp color LaserJet 2550 PostScript, and then click New Driver.
In the Add Printer Driver Wizard window, click Have Disk, and then Browse.
Browse to the directory that the downloaded files where unzipped to.

NOTE: The default directory would be c:\clj2550pswin2kxp2003-xx (xx represents language, such as en for English)

The Look in box will display clj2550pswin2kxp2003-xx (xx represents language, such as en for English). Do not open any folders in this directory. The autorun.ini file should be in the File name box. Click Open.
On the Install From Disk window, click OK. The print driver name, hp color LaserJet 2550 PostScript, should be displayed. Click Next to continue.
When the update is finished, click OK to close the hp color LaserJet 2550 PostScript Properties window. The update is now complete.
PLEASE USE THESE STEPS IF THIS IS A FIRST TIME INSTALLATION OF THE HP COLOR LASERJET 2550 DRIVER:
Attach a USB or parallel cable to the printer and the computer.
The "Found New Hardware Wizard" should appear. Note: If attaching via a parallel cable it may be necessary to restart the computer for the "Found New Hardware Wizard" to appear.
For Windows XP
Choose "Install from a list or specific location (advanced)" and then click Next.
Select only the box next to "Include this location in the search" (clear all other check boxes) then click the browse button to locate the directory where the driver was extracted to in the steps above. The directory these files are extracted to will have a similar name to the file that was downloaded (i.e., c:\clj2550ps).
Click once on the directory name to highlight it then choose OK. The directory path then appears in the dialog.
Select the Next button. Files will be copied to the appropriate directories automatically.
Click the Finish button within the "New Hardware Wizard"
After several moments and message will appear on the system tray (at the bottom right of the screen near the clock) indicating that "Your new hardware has been installed and is ready to use.

For Windows 2000
Click the Next button to continue.
Choose "Search for a suitable driver form my device (recommended)" and then click Next.
Select only the box next to "Specify a location" (clear all other check boxes) and click Next.
Click the browse button to locate the directory where the driver was extracted to in the steps above. The directory these files are extracted to will have a similar name to the file that was downloaded (i.e., c:\clj2550ps).
Click once on the directory name to highlight it and then select the Open button.
Autorun.inf should appear in the "file name" box. Click the Open button.
Select OK. The wizard will find the driver for the device.
Click the Next button.
Click Finish. Several dialogs will appear and then disappear.
The printer driver is now installed.
Compañía
Hewlett Packard
Dispositivo
Impresoras y Plotters
Modelo
Hewlett Packard HP Color LaserJet 2550Ln
Descripción
Universal Print Driver PCL 5
Sistema Operativo
Windows 2000-2003-XP-Vista
Idioma
Hungarian
Versión Driver
4.5
Tamaño
17.8Mb
Nombre del archivo
hpupd45pcl532.exe
Fecha
1 Apr 2008
Información
The UPD version 4.5 is the latest version of HP's Universal Print Driver. Please review the entire documentation for information on issues resolved, performance improvements, and new behavior changes to the UPD.
Compañía
Hewlett Packard
Dispositivo
Impresoras y Plotters
Modelo
Hewlett Packard HP Color LaserJet 2550Ln
Descripción
Universal Print Driver PostScript
Sistema Operativo
Windows 2000-2003-XP-Vista
Idioma
Hungarian
Versión Driver
4.5
Tamaño
18.6Mb
Nombre del archivo
hpupd45ps32.exe
Fecha
1 Apr 2008
Información
The UPD version 4.5 is the latest version of HP's Universal Print Driver. Please review the entire documentation for information on issues resolved, performance improvements, and new behavior changes to the UPD.
Compañía
Hewlett Packard
Dispositivo
Impresoras y Plotters
Modelo
Hewlett Packard HP Color LaserJet 2550Ln
Descripción
PCL6 Driver
Sistema Operativo
Windows 2000-2003-XP-Vista
Idioma
Hungarian
Versión Driver
4.5
Tamaño
18Mb
Nombre del archivo
hpupd45pcl632.exe
Fecha
1 Apr 2008
Información
The UPD version 4.5 is the latest version of HP's Universal Print Driver. Please review the entire documentation for information on issues resolved, performance improvements, and new behavior changes to the UPD.
Compañía
Hewlett Packard
Dispositivo
Impresoras y Plotters
Modelo
Hewlett Packard HP Color LaserJet 2550Ln
Descripción
PCL5 Driver
Sistema Operativo
Windows 2003 64 bits-XP 64 bits-Vista 64 bits
Idioma
Hungarian
Versión Driver
4.5
Tamaño
18.2Mb
Nombre del archivo
hpupd45pcl564.exe
Fecha
1 Apr 2008
Información
The UPD version 4.5 is the latest version of HP's Universal Print Driver. Please review the entire documentation for information on issues resolved, performance improvements, and new behavior changes to the UPD.
Compañía
Hewlett Packard
Dispositivo
Impresoras y Plotters
Modelo
Hewlett Packard HP Color LaserJet 2550Ln
Descripción
PCL6 Driver
Sistema Operativo
Windows 2003 64 bits-XP 64 bits-Vista 64 bits
Idioma
Hungarian
Versión Driver
4.5
Tamaño
18.2Mb
Nombre del archivo
hpupd45pcl664.exe
Fecha
1 Apr 2008
Información
The UPD version 4.5 is the latest version of HP's Universal Print Driver. Please review the entire documentation for information on issues resolved, performance improvements, and new behavior changes to the UPD.
Compañía
Hewlett Packard
Dispositivo
Impresoras y Plotters
Modelo
Hewlett Packard HP Color LaserJet 2550Ln
Descripción
Universal Print Driver x64 PostScript
Sistema Operativo
Windows 2003 64 bits-XP 64 bits-Vista 64 bits
Idioma
Hungarian
Versión Driver
4.5
Tamaño
19Mb
Nombre del archivo
hpupd45ps64.exe
Fecha
1 Apr 2008
Información
The UPD version 4.5 is the latest version of HP's Universal Print Driver. Please review the entire documentation for information on issues resolved, performance improvements, and new behavior changes to the UPD.
Compañía
Hewlett Packard
Dispositivo
Impresoras y Plotters
Modelo
Hewlett Packard HP Color LaserJet 2550Ln
Descripción
PCL6 Plug and Play Bundle
Sistema Operativo
Windows 98-Me-2000-2003-XP
Idioma
Hungarian
Versión Driver
2.0
Tamaño
11.7Mb
Nombre del archivo
clj2550pcl6-hu.exe
Información
Use this software for first time USB installations only. Do NOT attach USB cable until prompted by the installation program

If upgrading a previous installation please use the "HP Color LaserJet 2550 PCL6 driver" download and view the description which includes instructions for updating the driver.

HP Color LaserJet 2550 PCL6 Plug and Play Bundle provides the following:

An installation program to assist with installation.
The print drivers are the same as those found on the version 2.0 CD.
Windows 98/ME: 4.24.2550.400
Windows 2000/XP/2003: 60.034.78.41
Plug and Play installable drivers for 1284.4 communication with the device.
Plug and Play installable PCL6 printer driver.
The product CD can be used at a later time to install additional product software, such as Toolbox.
A silent install is provided by running the program from a DOS prompt with the following command line parameters:
lj2550pcl6-en.exe -s -a -silent

This section will help you in the download of the software to your computer and start you on the install process.
Before proceeding with the software installation, the printer must first be properly set up, and your computer must be ready to print.
Close any screen savers, virus protection programs, or other software programs running on your computer.
Click on Download Now and a File Download box will appear.
Select Save This Program to Disk and a Save As box will appear.
Select a directory to save the file in and click Save.
Locate the file using Windows Explorer when the download has completed.
Double click on the file. This will extract all the driver files into a directory on your hard drive. The default directory is Program Files\Hewlett-Packard\Color LaserJet 2550 Drivers. However, you can change the path and directory name at the time of extracting the file.
Follow the instructions presented by the installation program. Do NOT attach the USB cable to the printer until prompted by the installation program.
Compañía
Hewlett Packard
Dispositivo
Impresoras y Plotters
Modelo
Hewlett Packard HP Color LaserJet 2550Ln
Descripción
Firmware Update utility
Sistema Operativo
Windows 98-Me-2000-XP
Idioma
Hungarian
Versión Firmware
20040930
Tamaño
6.2Mb
Nombre del archivo
flash_5f2550_20040930_rev2.exe
Fecha
11 Oct 2004
Información
WARNING: Determine what the current firmware version of your printer is before downloading the update. If your printer already has the current version (20040930), downloading this file might cause possible performance issues. To determine the version of firmware of your HP Color LaserJet 2550 printer, print a Configuration Page by pressing the Go button (green) and the Cancel button (Red) on the printer's control panel. The firmware version is listed on the top left part of the page, under Product Information - Firmware Datecode.
Firmware Enhancements

These changes are implemented in the new version firmware 20040930:
Default screenmatch color treatment for non-driver PostScript jobs.
Enabled to set FONTSOURCE to a downloaded soft font via PJL.
Cyrillic/Greek/Hebrew font settings now available
Improved memory allocation for complex pages.
The default I/O timeout changed to 120 seconds.
Printing from Mac systems, and printing PDF files, will have an improved CMYK color adjustment.
Calibration will now occur on non-HP refilled cartridge that have the e-label set to "toner out".
Unexpected Paper Size messages are now bypassed by pressing Go or Cancel from the Toolbox utility.
The Supplies Status page will now include the part number for HP cartridges when recognizing a non-HP cartridge installed.
Monochrome print speed will increase by choosing "Print to Grayscale" in the driver's Color tab

Note: This utility is in English only.

* The HP Color LaserJet 2550 series Firmware Update Utility can be performed using either a Parallel or USB port.
When using the USB port, the HP Color LaserJet 2550 series software must be installed prior to using this utility.
When using the parallel port, the HP Color LaserJet 2550 series software does not need to be installed. Connect the 2550 series printer to a PC with the Firmware Update Utility loaded using a parallel cable.
* You will need 20MB of disk space to use the Firmware Update Utility.

* The HP Color LaserJet 2550 series printer must be in a READY state and remain powered on during the entire firmware update process.

* Administrator Privileges are required on the PC executing the utility.

* The control panel of the printer will display a series of flashing lights.

* After the Firmware Update Utility has finished, the HP Color LaserJet 2550 series printer will display a solid green Ready light (second from the bottom). Depending on the operating system on your PC, you may be prompted to reboot your computer.

This utility is for use on Windows 95, 98, ME, 2000 and XP. It can ONLY be used with parallel or USB connections.


Installation Instructions

* For users connected via the network, please temporarily disconnect your HP Color LaserJet 2550 series printer from the network to ensure the network devices to not interrupt the firmware upgrade process.

Parallel Cable connection
Connect a PC to the HP Color LaserJet 2550 series printer via a parallel cable.
You do not need to install the HP software for parallel upgrades.
If the "Add Hardware" wizard starts when you plug in the parallel cable, you can safely cancel it.
Double click the Flash Update utility.
Click 'OK' to begin the process. The utility will go through the following steps:
Close all toolbox and HP software running on the host PC.
Upload firmware to printer, at which point the printer lights will start flashing until complete.
Printer will then erase the old firmware and write the new firmware and reboot it.
Utility will prompt user to reboot PC (to synchronize the printer, restart Toolbox and the HP software)
DO NOT POWER CYCLE THE PRINTER during the upgrade process or it will leave your printer in an unusable state.
Once the utility is complete, it will prompt you to reboot your PC and printer to synchronize the printer and the HP Toolbox.
The firmware update can take up to 5 minutes to complete. Please be patient.
USB Connection
In order to use USB to update your printer, you must have the HP Color LaserJet 2550 series printer software installed on your PC.
You do NOT need to have toolbox installed. A driver only installation will work fine.
Ensure your HP Color LaserJet 2550 series printer is connected to the USB cable.
Double click the Flash Update utility.
Click 'OK' to begin the process. The utility will go through the following steps:
Close all Toolbox and HP software running on host PC.
Upload firmware to printer, at which point the printer lights will flash until complete.
Printer will then erase the old firmware and write the new firmware and reboot itself.
Utility will prompt user to reboot PC (to resync printer, restart toolbox and HP software)
DO NOT POWER CYCLE THE PRINTER during the upgrade process or it will leave your printer in an unusable state.
Once the utility is complete, it will prompt you to reboot your PC and printer to resync the printer and the HP Toolbox.
The firmware update can take up to 5 minutes to complete. Please be patient.
Compañía
Hewlett Packard
Dispositivo
Impresoras y Plotters
Modelo
Hewlett Packard HP Color LaserJet 2550Ln
Descripción
PCL6 Driver
Sistema Operativo
Windows NT4
Idioma
Hungarian
Versión Driver
4.24.2550.400
Tamaño
2.9Mb
Nombre del archivo
clj2550pcl6winnt4-hu.exe
Información
This section will help you in the download of the software to your computer and start you on the install process.
Before proceeding with the software installation, the printer must first be properly set up, and your computer must be ready to print.
Turn on the printer first, then turn on the computer.
Close any screen savers, virus protection programs, or other software programs running on your computer.
Click on Download Now and a File Download box will appear.
Select Save This Program to Disk and a Save As box will appear.
Select a directory to save the file in and click Save.
Locate the file using Windows Explorer when the download has completed.
Double click on the file. This will extract all the driver files into a directory on your hard drive. The directory these files are extracted to will have a similar name to the file that was downloaded (i.e., c:\clj2550pcl6). However, you can change the path and directory name at the time of extracting the file.
Open the Printers Window (Click Start-Settings-Printers).
Update the printer if it was previously installed
Right click on the printer and select Properties from the pop menu.
On the General tab, select New Driver.
Click on the Warning Box that pops up.
A printer listing box will appear. Select Have Disk.
Another box Install from Disk appears.
Click the Browse to locate the expanded files directory (i.e., c:\clj2550pcl6).
Click on the file ending with .inf .
Click Open and then OK and let files install.
Add the printer if it hasn't been installed yet.
Click Add New Printer
Follow the instructions of the Add Printer Wizard.
Compañía
Hewlett Packard
Dispositivo
Impresoras y Plotters
Modelo
Hewlett Packard HP Color LaserJet 2550Ln
Descripción
PostScript Driver
Sistema Operativo
Windows NT4
Idioma
Hungarian
Versión Driver
034.4100
Tamaño
1Mb
Nombre del archivo
clj2550pswinnt4-hu.exe
Información
This section will help you in the download of the software to your computer and start you on the install process.
Before proceeding with the software installation, the printer must first be properly set up, and your computer must be ready to print.
Turn on the printer first, then turn on the computer.
Close any screen savers, virus protection programs, or other software programs running on your computer.
Click on Download Now and a File Download box will appear.
Select Save This Program to Disk and a Save As box will appear.
Select a directory to save the file in and click Save.
Locate the file using Windows Explorer when the download has completed.
Double click on the file. This will extract all the driver files into a directory on your hard drive. The directory these files are extracted to will have a similar name to the file that was downloaded (i.e., c:\clj2550ps). However, you can change the path and directory name at the time of extracting the file.
Open the Printers Window (Click Start-Settings-Printers).
Update the printer if it was previously installed
Right click on the printer and select Properties from the pop menu.
On the General tab, select New Driver.
Click on the Warning Box that pops up.
A printer listing box will appear. Select Have Disk.
Another box Install from Disk appears.
Click the Browse to locate the expanded files directory (i.e., c:\clj2550ps).
Click on the file ending with .inf .
Click Open and then OK and let files install.
Add the printer if it hasn't been installed yet.
Click Add New Printer
Follow the instructions of the Add Printer Wizard.
Compañía
Hewlett Packard
Dispositivo
Impresoras y Plotters
Modelo
Hewlett Packard HP Color LaserJet 2550Ln
Descripción
Removal Tool
Sistema Operativo
Windows NT4-2000-XP
Idioma
Hungarian
Versión Driver
1.0.0.1
Tamaño
316Kb
Nombre del archivo
setconfig_exermtool.exe
Fecha
3 Jun 2005
Información
Download Info
If the following error message is encountered, please install this file for resolution.

This error message may occur with the following Hewlett-Packard LaserJet devices:
LaserJet 1010/1012/1015 Series
LaserJet 1150
LaserJet 1160
LaserJet 1300 Series
LaserJet 1320 Series
LaserJet 3015/3020/3030/3380 Series
Color LaserJet 2550
Note: If the error is encountered, it will be after the initial printer software install and upon consequential system reboots.

This section will help you in the download of the software to your computer and start you on the install process.
Close any screen savers, virus protection programs, or other software programs running on your computer.
Click on Download and a File Download box will appear.
Select Save This Program to Disk and a Save As box will appear.
Select a directory to save the file in and click Save.
Locate the file using Windows Explorer when the download has completed.
Double click on the file. It will execute and install the necessary files.




Compañía
Hewlett Packard
Dispositivo
Impresoras y Plotters
Modelo
Hewlett Packard HP Color LaserJet 2550Ln
Descripción
Printing software and utility
Sistema Operativo
Mac OS 9
Idioma
Italian
Versión Utilities
4.1
Tamaño
4Mb
Nombre del archivo
clj2550mac9_x-it.sit
Información
The HP LaserJet Installer provides HP LaserJet PostScript printing support for the Mac 9.1 and 9.2 operating systems.
Compañía
Hewlett Packard
Dispositivo
Impresoras y Plotters
Modelo
Hewlett Packard HP Color LaserJet 2550Ln
Descripción
Installer
Sistema Operativo
Mac OS 9
Idioma
Italian
Versión Driver
4.1
Tamaño
4Mb
Nombre del archivo
clj2550installer-it.sit
Información
HP Color LaserJet 2550 Installer for Mac OS 9.

Compañía
Hewlett Packard
Dispositivo
Impresoras y Plotters
Modelo
Hewlett Packard HP Color LaserJet 2550Ln
Descripción
Firmware Update utility
Sistema Operativo
Mac OS X
Idioma
Italian
Versión Firmware
20040930
Tamaño
5.6Mb
Nombre del archivo
2550_fw_update20040930.dmg
Fecha
28 Jul 2005
Información
WARNING: Determine what the current firmware version of your printer is before downloading the update. If your printer already has the current version (20040930), downloading this file might cause possible performance issues. To determine the version of firmware of your HP Color LaserJet 2550 printer, print a Configuration Page by pressing the Go button (green) and the Cancel button (Red) on the printer's control panel. The firmware version is listed on the top left part of the page, under Product Information - Firmware Datecode.

Firmware Enhancements

These changes are implemented in the new version firmware 20040930:
Default screenmatch color treatment for non-driver PostScript jobs.
Enabled to set FONTSOURCE to a downloaded soft font via PJL.
Cyrillic/Greek/Hebrew font settings now available
Improved memory allocation for complex pages.
The default I/O timeout changed to 120 seconds.
Printing from Mac systems, and printing PDF files, will have an improved CMYK color adjustment.
Calibration will now occur on non-HP refilled cartridge that have the e-label set to "toner out".
Unexpected Paper Size messages are now bypassed by pressing Go or Cancel from the Toolbox utility.
The Supplies Status page will now include the part number for HP cartridges when recognizing a non-HP cartridge installed.
Monochrome print speed will increase by choosing "Print to Grayscale" in the driver's Color tab.

Note: This utility is in English only.

* You will need 20MB of disk space to use the Firmware Update Utility.

* The HP Color LaserJet 2550 series printer must be in a READY state and remain powered on during the entire firmware update process.

* The control panel of the printer will display a series of flashing lights.

* After the Firmware Update Utility has finished, the HP Color LaserJet 2550 series printer will display a solid green Ready light (second from the bottom). You may be prompted to reboot your computer.


Installation Instructions

(NOTE! If you use Internet Explorer to download the utility, it may strip the .dmg extension to the file. Simply re-add the .dmg extension and MAC OS X should recognize the file as a disk image)

This utility is for use on any OS X 10.2 or 10.3 Mac. It will NOT function in the MAC OS 9 environment.

It can only be used with a USB connection to the HP Color LaserJet 2550.

Instructions for upgrade

* For users connected via the network, please temporarily disconnect your HP Color LaserJet 2550 series printer from the network to ensure the network devices to not interrupt the FW upgrade process.
Mount the disk image containing the FW update.
Run the FW Update Application contained in the disk image.
Follow the onscreen prompts to continue.
When prompted, connect the printer via USB.
Upon finding an HP Color LaserJet 2550 series printer, the utility will prompt you to reboot the printer by simply turn the power off and back on. This ensures the printer is in a proper state to receive the update.
Once the printer has been rebooted, the utility will allow you to 'download' the firmware to the HP Color LaserJet 2550 series printer.
DO NOT POWER CYCLE THE PRINTER during the upgrade process or it will leave your printer in an unusable state.
One green LED will start flashing initially followed by 2 LED's flashing.
Once the LEDS stop flashing, the printer has updated and re-initialized, the firmware should be updated.
The firmware update can take up to 5 minutes to complete. Please be patient.
Compañía
Hewlett Packard
Dispositivo
Impresoras y Plotters
Modelo
Hewlett Packard HP Color LaserJet 2550Ln
Descripción
Installer Print Only Software Solution for v10.2 v10.3.x v10.4.x v10.5
Sistema Operativo
Mac OS X
Idioma
Italian
Versión Driver
7.8.0.761
Tamaño
29.1Mb
Nombre del archivo
hp_laserjet_and_edgeline_print-only.dmg
Fecha
28 Jan 2008
Información
This download package contains HP LaserJet Mac OS X Installer Print Only Software Solution v7.8.0.761. Included are the HP Postscript PPD and PDE files for Mac OS X v10.2, v10.3.x, v10.4.x, v10.5 - PPC and Intel processor.
Supported Devices
HP color LaserJet 2500
HP color LaserJet 2550 series
HP color LaserJet 3700
HP color LaserJet 4600
HP color LaserJet 4650
HP color LaserJet 5500
HP Color LaserJet 5550
HP Color LaserJet 8500
HP Color LaserJet 8550
HP color LaserJet 9500
HP color LaserJet 9500 MFP
HP Color LaserJet
HP Color LaserJet 5/5M
HP Color LaserJet 4500
HP Color LaserJet 4550
HP LaserJet 1200
HP LaserJet 1300
HP LaserJet 1300n
HP LaserJet 1320 series
HP LaserJet 2100 Series
HP LaserJet 2200
HP LaserJet 4000 Series
HP LaserJet 4050 Series
HP LaserJet 4100 MFP
HP LaserJet 4100 Series
HP LaserJet 4200
HP LaserJet 4200L
HP LaserJet 4240
HP LaserJet 4240N
HP LaserJet 4250
HP LaserJet 4250L
HP LaserJet 4300
HP LaserJet 4350
HP LaserJet 4350L
HP LaserJet 4V
HP LaserJet 5000 Series
HP LaserJet 5100 Series
HP LaserJet 8000 Series
HP LaserJet 8100 Series
HP LaserJet 8150 Series
HP LaserJet 9000 MFP
HP LaserJet 9000L MFP
HP LaserJet 9000 Series
HP LaserJet 9040
HP LaserJet 9040 MFP
HP LaserJet 9050 MFP
HP LaserJet 9050
HP LaserJet 9055 mfp
HP LaserJet 9065 mfp
HP LaserJet 4 Plus
HP LaserJet 4ML
HP LaserJet 4MP
HP LaserJet 4Si
HP LaserJet 5M
HP LaserJet 5P
HP LaserJet 5Si
HP LaserJet 5Si Mopier
HP LaserJet 6P
HP Mopier 240
HP Mopier 320
HP LaserJet 1220
HP LaserJet 3015
HP LaserJet 3020
HP LaserJet 3030
HP LaserJet 3200
HP LaserJet 3300/3310/3320
HP LaserJet 3300
HP LaserJet 3380
HP business inkjet 2300
HP Business Inkjet 2600
HP Business Inkjet 2800
HP Business Inkjet 3000
HP officejet 9100 series
HP Business Inkjet 2250
HP Business Inkjet 2280
Compañía
Hewlett Packard
Dispositivo
Impresoras y Plotters
Modelo
Hewlett Packard HP Color LaserJet 2550Ln
Descripción
PostScript Driver
Sistema Operativo
Windows 2000-2003-XP
Idioma
Italian
Versión Driver
60.34.78.41
Tamaño
5.3Mb
Nombre del archivo
clj2550pswin2kxp2003-it.exe
Información
Enhancements

Incorporated JPEG compression to reduce spool file size.
Resolves spoolsv.exe crash when printing some PowerPoint documents.
Control Panel simulator in the Services tab is now functional.

This section will help you in the download of the software to your computer and start you on the install process.
Before proceeding with the software installation, the printer must first be properly set up, and your computer must be ready to print.

DOWNLOAD AND EXTRACT THE SOFTWARE

Close any screen savers, virus protection programs, or other software programs running on your computer.
Click on Download Now and a File Download box will appear.
Select Save This Program to Disk and a Save As box will appear.
Select a directory to save the file in and click Save.
Locate the file using Windows Explorer when the download has completed.
Double click on the file. This will extract all the driver files into a directory on your hard drive. The directory these files are extracted to will have a similar name to the file that was downloaded (i.e., c:\clj2550ps). However, you can change the path and directory name at the time of extracting the file.
PLEASE USE THESE STEPS IF YOU ARE UPDATING THE HP COLOR LASERJET 2550 DRIVER
From the Windows XP desktop, click Start, and then Printers and Faxes (for Windows 2000, click Start, Settings and then Printers).
Right click on the hp color LaserJet 2550 PostScript icon or listing, and then click Properties.
Click the Advanced tab.
Make certain the Driver box displays hp color LaserJet 2550 PostScript, and then click New Driver.
In the Add Printer Driver Wizard window, click Have Disk, and then Browse.
Browse to the directory that the downloaded files where unzipped to.

NOTE: The default directory would be c:\clj2550pswin2kxp2003-xx (xx represents language, such as en for English)

The Look in box will display clj2550pswin2kxp2003-xx (xx represents language, such as en for English). Do not open any folders in this directory. The autorun.ini file should be in the File name box. Click Open.
On the Install From Disk window, click OK. The print driver name, hp color LaserJet 2550 PostScript, should be displayed. Click Next to continue.
When the update is finished, click OK to close the hp color LaserJet 2550 PostScript Properties window. The update is now complete.
PLEASE USE THESE STEPS IF THIS IS A FIRST TIME INSTALLATION OF THE HP COLOR LASERJET 2550 DRIVER:
Attach a USB or parallel cable to the printer and the computer.
The "Found New Hardware Wizard" should appear. Note: If attaching via a parallel cable it may be necessary to restart the computer for the "Found New Hardware Wizard" to appear.
For Windows XP
Choose "Install from a list or specific location (advanced)" and then click Next.
Select only the box next to "Include this location in the search" (clear all other check boxes) then click the browse button to locate the directory where the driver was extracted to in the steps above. The directory these files are extracted to will have a similar name to the file that was downloaded (i.e., c:\clj2550ps).
Click once on the directory name to highlight it then choose OK. The directory path then appears in the dialog.
Select the Next button. Files will be copied to the appropriate directories automatically.
Click the Finish button within the "New Hardware Wizard"
After several moments and message will appear on the system tray (at the bottom right of the screen near the clock) indicating that "Your new hardware has been installed and is ready to use.

For Windows 2000
Click the Next button to continue.
Choose "Search for a suitable driver form my device (recommended)" and then click Next.
Select only the box next to "Specify a location" (clear all other check boxes) and click Next.
Click the browse button to locate the directory where the driver was extracted to in the steps above. The directory these files are extracted to will have a similar name to the file that was downloaded (i.e., c:\clj2550ps).
Click once on the directory name to highlight it and then select the Open button.
Autorun.inf should appear in the "file name" box. Click the Open button.
Select OK. The wizard will find the driver for the device.
Click the Next button.
Click Finish. Several dialogs will appear and then disappear.
The printer driver is now installed.
Compañía
Hewlett Packard
Dispositivo
Impresoras y Plotters
Modelo
Hewlett Packard HP Color LaserJet 2550Ln
Descripción
PCL6 Driver
Sistema Operativo
Windows 2000-2003-XP
Idioma
Italian
Versión Driver
60.34.78.41
Tamaño
5.5Mb
Nombre del archivo
clj2550pcl6win2kxp2003-it.exe
Información
Enhancements

Incorporated JPEG compression to reduce spool file size.
Resolves spoolsv.exe crash when printing some PowerPoint documents.
Control Panel simulator in the Services tab is now functional.

This section will help you in the download of the software to your computer and start you on the install process.
Before proceeding with the software installation, the printer must first be properly set up, and your computer must be ready to print.

DOWNLOAD AND EXTRACT THE SOFTWARE

Close any screen savers, virus protection programs, or other software programs running on your computer.
Click on Download Now and a File Download box will appear.
Select Save This Program to Disk and a Save As box will appear.
Select a directory to save the file in and click Save.
Locate the file using Windows Explorer when the download has completed.
Double click on the file. This will extract all the driver files into a directory on your hard drive. The directory these files are extracted to will have a similar name to the file that was downloaded (i.e., c:\clj2550pcl6). However, you can change the path and directory name at the time of extracting the file.
PLEASE USE THESE STEPS IF YOU ARE UPDATING THE HP COLOR LASERJET 2550 DRIVER
From the Windows XP desktop, click Start, and then Printers and Faxes (for Windows 2000, click Start, Settings and then Printers).
Right click on the hp color LaserJet 2550 PCL6 icon or listing, and then click Properties.
Click the Advanced tab.
Make certain the Driver box displays hp color LaserJet 2550 PCL6, and then click New Driver.
In the Add Printer Driver Wizard window, click Have Disk, and then Browse.
Browse to the directory that the downloaded files where unzipped to.

NOTE: The default directory would be C:\clj2550pcl6 (xx represents language, such as en for English)

The Look in box will display clj2550pcl6win2kxp2003-xx (xx represents language, such as en for English). Do not open any folders in this directory. The autorun.ini file should be in the File name box. Click Open.
On the Install From Disk window, click OK. The print driver name, hp color LaserJet 2550 PCL6, should be displayed. Click Next to continue.
When the update is finished, click OK to close the hp color LaserJet 2550 PCL6 Properties window. The update is now complete.
PLEASE USE THESE STEPS IF THIS IS A FIRST TIME INSTALLATION OF THE HP COLOR LASERJET 2550 DRIVER:
Attach a USB or parallel cable to the printer and the computer.
The "Found New Hardware Wizard" should appear. Note: If attaching via a parallel cable it may be necessary to restart the computer for the "Found New Hardware Wizard" to appear.
For Windows XP
Choose "Install from a list or specific location (advanced)" and then click Next.
Select only the box next to "Include this location in the search" (clear all other check boxes) then click the browse button to locate the directory where the driver was extracted to in the steps above. The directory these files are extracted to will have a similar name to the file that was downloaded (i.e., c:\clj2550pcl6).
Click once on the directory name to highlight it then choose OK. The directory path then appears in the dialog.
Select the Next button. Files will be copied to the appropriate directories automatically.
Click the Finish button within the "New Hardware Wizard"
After several moments and message will appear on the system tray (at the bottom right of the screen near the clock) indicating that "Your new hardware has been installed and is ready to use.

For Windows 2000
Click the Next button to continue.
Choose "Search for a suitable driver form my device (recommended)" and then click Next.
Select only the box next to "Specify a location" (clear all other check boxes) and click Next.
Click the browse button to locate the directory where the driver was extracted to in the steps above. The directory these files are extracted to will have a similar name to the file that was downloaded (i.e., c:\clj2550pcl6).
Click once on the directory name to highlight it and then select the Open button.
Autorun.inf should appear in the "file name" box. Click the Open button.
Select OK. The wizard will find the driver for the device.
Click the Next button.
Click Finish. Several dialogs will appear and then disappear.
The printer driver is now installed.
Compañía
Hewlett Packard
Dispositivo
Impresoras y Plotters
Modelo
Hewlett Packard HP Color LaserJet 2550Ln
Descripción
PCL6 Driver
Sistema Operativo
Windows 2000-2003-XP-Vista
Idioma
Italian
Versión Driver
4.5
Tamaño
18Mb
Nombre del archivo
hpupd45pcl632.exe
Fecha
1 Apr 2008
Información
The UPD version 4.5 is the latest version of HP's Universal Print Driver. Please review the entire documentation for information on issues resolved, performance improvements, and new behavior changes to the UPD.
Compañía
Hewlett Packard
Dispositivo
Impresoras y Plotters
Modelo
Hewlett Packard HP Color LaserJet 2550Ln
Descripción
Universal Print Driver PCL 5
Sistema Operativo
Windows 2000-2003-XP-Vista
Idioma
Italian
Versión Driver
4.5
Tamaño
17.8Mb
Nombre del archivo
hpupd45pcl532.exe
Fecha
1 Apr 2008
Información
The UPD version 4.5 is the latest version of HP's Universal Print Driver. Please review the entire documentation for information on issues resolved, performance improvements, and new behavior changes to the UPD.
Compañía
Hewlett Packard
Dispositivo
Impresoras y Plotters
Modelo
Hewlett Packard HP Color LaserJet 2550Ln
Descripción
Universal Print Driver PostScript
Sistema Operativo
Windows 2000-2003-XP-Vista
Idioma
Italian
Versión Driver
4.5
Tamaño
18.6Mb
Nombre del archivo
hpupd45ps32.exe
Fecha
1 Apr 2008
Información
The UPD version 4.5 is the latest version of HP's Universal Print Driver. Please review the entire documentation for information on issues resolved, performance improvements, and new behavior changes to the UPD.
Compañía
Hewlett Packard
Dispositivo
Impresoras y Plotters
Modelo
Hewlett Packard HP Color LaserJet 2550Ln
Descripción
PCL5 Driver
Sistema Operativo
Windows 2003 64 bits-XP 64 bits-Vista 64 bits
Idioma
Italian
Versión Driver
4.5
Tamaño
18.2Mb
Nombre del archivo
hpupd45pcl564.exe
Fecha
1 Apr 2008
Información
The UPD version 4.5 is the latest version of HP's Universal Print Driver. Please review the entire documentation for information on issues resolved, performance improvements, and new behavior changes to the UPD.
Compañía
Hewlett Packard
Dispositivo
Impresoras y Plotters
Modelo
Hewlett Packard HP Color LaserJet 2550Ln
Descripción
PCL6 Driver
Sistema Operativo
Windows 2003 64 bits-XP 64 bits-Vista 64 bits
Idioma
Italian
Versión Driver
4.5
Tamaño
18.2Mb
Nombre del archivo
hpupd45pcl664.exe
Fecha
1 Apr 2008
Información
The UPD version 4.5 is the latest version of HP's Universal Print Driver. Please review the entire documentation for information on issues resolved, performance improvements, and new behavior changes to the UPD.
Compañía
Hewlett Packard
Dispositivo
Impresoras y Plotters
Modelo
Hewlett Packard HP Color LaserJet 2550Ln
Descripción
Universal Print Driver x64 PostScript
Sistema Operativo
Windows 2003 64 bits-XP 64 bits-Vista 64 bits
Idioma
Italian
Versión Driver
4.5
Tamaño
19Mb
Nombre del archivo
hpupd45ps64.exe
Fecha
1 Apr 2008
Información
The UPD version 4.5 is the latest version of HP's Universal Print Driver. Please review the entire documentation for information on issues resolved, performance improvements, and new behavior changes to the UPD.
Compañía
Hewlett Packard
Dispositivo
Impresoras y Plotters
Modelo
Hewlett Packard HP Color LaserJet 2550Ln
Descripción
PCL6 Plug and Play Bundle
Sistema Operativo
Windows 98-Me-2000-2003-XP
Idioma
Italian
Versión Driver
2.0
Tamaño
11.7Mb
Nombre del archivo
clj2550pcl6-it.exe
Información
Use this software for first time USB installations only. Do NOT attach USB cable until prompted by the installation program

If upgrading a previous installation please use the "HP Color LaserJet 2550 PCL6 driver" download and view the description which includes instructions for updating the driver.

HP Color LaserJet 2550 PCL6 Plug and Play Bundle provides the following:

An installation program to assist with installation.
The print drivers are the same as those found on the version 2.0 CD.
Windows 98/ME: 4.24.2550.400
Windows 2000/XP/2003: 60.034.78.41
Plug and Play installable drivers for 1284.4 communication with the device.
Plug and Play installable PCL6 printer driver.
The product CD can be used at a later time to install additional product software, such as Toolbox.
A silent install is provided by running the program from a DOS prompt with the following command line parameters:
lj2550pcl6-en.exe -s -a -silent

This section will help you in the download of the software to your computer and start you on the install process.
Before proceeding with the software installation, the printer must first be properly set up, and your computer must be ready to print.
Close any screen savers, virus protection programs, or other software programs running on your computer.
Click on Download Now and a File Download box will appear.
Select Save This Program to Disk and a Save As box will appear.
Select a directory to save the file in and click Save.
Locate the file using Windows Explorer when the download has completed.
Double click on the file. This will extract all the driver files into a directory on your hard drive. The default directory is Program Files\Hewlett-Packard\Color LaserJet 2550 Drivers. However, you can change the path and directory name at the time of extracting the file.
Follow the instructions presented by the installation program. Do NOT attach the USB cable to the printer until prompted by the installation program.
Compañía
Hewlett Packard
Dispositivo
Impresoras y Plotters
Modelo
Hewlett Packard HP Color LaserJet 2550Ln
Descripción
Firmware Update utility
Sistema Operativo
Windows 98-Me-2000-XP
Idioma
Italian
Versión Firmware
20040930
Tamaño
6.2Mb
Nombre del archivo
flash_5f2550_20040930_rev2.exe
Fecha
11 Oct 2004
Información
WARNING: Determine what the current firmware version of your printer is before downloading the update. If your printer already has the current version (20040930), downloading this file might cause possible performance issues. To determine the version of firmware of your HP Color LaserJet 2550 printer, print a Configuration Page by pressing the Go button (green) and the Cancel button (Red) on the printer's control panel. The firmware version is listed on the top left part of the page, under Product Information - Firmware Datecode.
Firmware Enhancements

These changes are implemented in the new version firmware 20040930:
Default screenmatch color treatment for non-driver PostScript jobs.
Enabled to set FONTSOURCE to a downloaded soft font via PJL.
Cyrillic/Greek/Hebrew font settings now available
Improved memory allocation for complex pages.
The default I/O timeout changed to 120 seconds.
Printing from Mac systems, and printing PDF files, will have an improved CMYK color adjustment.
Calibration will now occur on non-HP refilled cartridge that have the e-label set to "toner out".
Unexpected Paper Size messages are now bypassed by pressing Go or Cancel from the Toolbox utility.
The Supplies Status page will now include the part number for HP cartridges when recognizing a non-HP cartridge installed.
Monochrome print speed will increase by choosing "Print to Grayscale" in the driver's Color tab

Note: This utility is in English only.

* The HP Color LaserJet 2550 series Firmware Update Utility can be performed using either a Parallel or USB port.
When using the USB port, the HP Color LaserJet 2550 series software must be installed prior to using this utility.
When using the parallel port, the HP Color LaserJet 2550 series software does not need to be installed. Connect the 2550 series printer to a PC with the Firmware Update Utility loaded using a parallel cable.
* You will need 20MB of disk space to use the Firmware Update Utility.

* The HP Color LaserJet 2550 series printer must be in a READY state and remain powered on during the entire firmware update process.

* Administrator Privileges are required on the PC executing the utility.

* The control panel of the printer will display a series of flashing lights.

* After the Firmware Update Utility has finished, the HP Color LaserJet 2550 series printer will display a solid green Ready light (second from the bottom). Depending on the operating system on your PC, you may be prompted to reboot your computer.

This utility is for use on Windows 95, 98, ME, 2000 and XP. It can ONLY be used with parallel or USB connections.


Installation Instructions

* For users connected via the network, please temporarily disconnect your HP Color LaserJet 2550 series printer from the network to ensure the network devices to not interrupt the firmware upgrade process.

Parallel Cable connection
Connect a PC to the HP Color LaserJet 2550 series printer via a parallel cable.
You do not need to install the HP software for parallel upgrades.
If the "Add Hardware" wizard starts when you plug in the parallel cable, you can safely cancel it.
Double click the Flash Update utility.
Click 'OK' to begin the process. The utility will go through the following steps:
Close all toolbox and HP software running on the host PC.
Upload firmware to printer, at which point the printer lights will start flashing until complete.
Printer will then erase the old firmware and write the new firmware and reboot it.
Utility will prompt user to reboot PC (to synchronize the printer, restart Toolbox and the HP software)
DO NOT POWER CYCLE THE PRINTER during the upgrade process or it will leave your printer in an unusable state.
Once the utility is complete, it will prompt you to reboot your PC and printer to synchronize the printer and the HP Toolbox.
The firmware update can take up to 5 minutes to complete. Please be patient.
USB Connection
In order to use USB to update your printer, you must have the HP Color LaserJet 2550 series printer software installed on your PC.
You do NOT need to have toolbox installed. A driver only installation will work fine.
Ensure your HP Color LaserJet 2550 series printer is connected to the USB cable.
Double click the Flash Update utility.
Click 'OK' to begin the process. The utility will go through the following steps:
Close all Toolbox and HP software running on host PC.
Upload firmware to printer, at which point the printer lights will flash until complete.
Printer will then erase the old firmware and write the new firmware and reboot itself.
Utility will prompt user to reboot PC (to resync printer, restart toolbox and HP software)
DO NOT POWER CYCLE THE PRINTER during the upgrade process or it will leave your printer in an unusable state.
Once the utility is complete, it will prompt you to reboot your PC and printer to resync the printer and the HP Toolbox.
The firmware update can take up to 5 minutes to complete. Please be patient.
Compañía
Hewlett Packard
Dispositivo
Impresoras y Plotters
Modelo
Hewlett Packard HP Color LaserJet 2550Ln
Descripción
PostScript Driver
Sistema Operativo
Windows NT4
Idioma
Italian
Versión Driver
034.4100
Tamaño
1Mb
Nombre del archivo
clj2550pswinnt4-it.exe
Información
This section will help you in the download of the software to your computer and start you on the install process.
Before proceeding with the software installation, the printer must first be properly set up, and your computer must be ready to print.
Turn on the printer first, then turn on the computer.
Close any screen savers, virus protection programs, or other software programs running on your computer.
Click on Download Now and a File Download box will appear.
Select Save This Program to Disk and a Save As box will appear.
Select a directory to save the file in and click Save.
Locate the file using Windows Explorer when the download has completed.
Double click on the file. This will extract all the driver files into a directory on your hard drive. The directory these files are extracted to will have a similar name to the file that was downloaded (i.e., c:\clj2550ps). However, you can change the path and directory name at the time of extracting the file.
Open the Printers Window (Click Start-Settings-Printers).
Update the printer if it was previously installed
Right click on the printer and select Properties from the pop menu.
On the General tab, select New Driver.
Click on the Warning Box that pops up.
A printer listing box will appear. Select Have Disk.
Another box Install from Disk appears.
Click the Browse to locate the expanded files directory (i.e., c:\clj2550ps).
Click on the file ending with .inf .
Click Open and then OK and let files install.
Add the printer if it hasn't been installed yet.
Click Add New Printer
Follow the instructions of the Add Printer Wizard.
Compañía
Hewlett Packard
Dispositivo
Impresoras y Plotters
Modelo
Hewlett Packard HP Color LaserJet 2550Ln
Descripción
Mobile Printing for Notebooks
Sistema Operativo
Windows NT4
Idioma
Italian
Versión Driver
2.10
Tamaño
3.5Mb
Nombre del archivo
mobileprinting4notebooksnt4-it.exe
Información
HP Mobile Printing for Notebooks (formally known as HP Mobile Printing Driver) is a software solution designed to facilitate printing from mobile notebook computers to network-connected Postscript-enabled HP printers.

As the notebook user moves around within the enterprise from floor to floor or from site to site, there is a need to print to networked printers that are encountered while away from the desk. HP Mobile Printing for Notebooks allows easy printing access to these newly encountered printers. There is no need to locate the printer driver or create a new network port. The user simply selects the HP Mobile Printing application, enters the network address (IP Address, hostname, or UNC pathname) of the target printer when prompted, and the print job is sent to the printer.

A Web JetAdmin plug-in has been developed to allow IT administrators to remotely enable display of the printer IP address on the printer control panel display. To download this plug-in, please visit the HP web jetadmin software and components download site.

If the printer IP address is not displayed, you may determine the IP address by printing a Configuration Page from the printer control panel menu.

Download and Installation

Note: Before proceeding with the software installation, be aware that administrator privileges are required to install the software and configure the printing system.

Close any screen savers, virus protection programs, or other software programs running on your computer.
Click on Download Now and a File Download box will appear.
Select Save This Program to Disk and a Save As box will appear.
Select a directory to save the file in and click Save.
Locate the file using Windows Explorer when the download has completed.
Double click on the file. This will begin the installation process. During the install, you may choose to make the HP Mobile Printing the default system printer on your computer.
When the installation is complete, a new system printer named HP Mobile Printing will be located in the Printers folder on your computer.
Compañía
Hewlett Packard
Dispositivo
Impresoras y Plotters
Modelo
Hewlett Packard HP Color LaserJet 2550Ln
Descripción
PCL6 Driver
Sistema Operativo
Windows NT4
Idioma
Italian
Versión Driver
4.24.2550.400
Tamaño
2.9Mb
Nombre del archivo
clj2550pcl6winnt4-it.exe
Información
This section will help you in the download of the software to your computer and start you on the install process.
Before proceeding with the software installation, the printer must first be properly set up, and your computer must be ready to print.
Turn on the printer first, then turn on the computer.
Close any screen savers, virus protection programs, or other software programs running on your computer.
Click on Download Now and a File Download box will appear.
Select Save This Program to Disk and a Save As box will appear.
Select a directory to save the file in and click Save.
Locate the file using Windows Explorer when the download has completed.
Double click on the file. This will extract all the driver files into a directory on your hard drive. The directory these files are extracted to will have a similar name to the file that was downloaded (i.e., c:\clj2550pcl6). However, you can change the path and directory name at the time of extracting the file.
Open the Printers Window (Click Start-Settings-Printers).
Update the printer if it was previously installed
Right click on the printer and select Properties from the pop menu.
On the General tab, select New Driver.
Click on the Warning Box that pops up.
A printer listing box will appear. Select Have Disk.
Another box Install from Disk appears.
Click the Browse to locate the expanded files directory (i.e., c:\clj2550pcl6).
Click on the file ending with .inf .
Click Open and then OK and let files install.
Add the printer if it hasn't been installed yet.
Click Add New Printer
Follow the instructions of the Add Printer Wizard.
Compañía
Hewlett Packard
Dispositivo
Impresoras y Plotters
Modelo
Hewlett Packard HP Color LaserJet 2550Ln
Descripción
Removal Tool
Sistema Operativo
Windows NT4-2000-XP
Idioma
Italian
Versión Driver
1.0.0.1
Tamaño
316Kb
Nombre del archivo
setconfig_exermtool.exe
Fecha
3 Jun 2005
Información
Download Info
If the following error message is encountered, please install this file for resolution.

This error message may occur with the following Hewlett-Packard LaserJet devices:
LaserJet 1010/1012/1015 Series
LaserJet 1150
LaserJet 1160
LaserJet 1300 Series
LaserJet 1320 Series
LaserJet 3015/3020/3030/3380 Series
Color LaserJet 2550
Note: If the error is encountered, it will be after the initial printer software install and upon consequential system reboots.

This section will help you in the download of the software to your computer and start you on the install process.
Close any screen savers, virus protection programs, or other software programs running on your computer.
Click on Download and a File Download box will appear.
Select Save This Program to Disk and a Save As box will appear.
Select a directory to save the file in and click Save.
Locate the file using Windows Explorer when the download has completed.
Double click on the file. It will execute and install the necessary files.




Compañía
Hewlett Packard
Dispositivo
Impresoras y Plotters
Modelo
Hewlett Packard HP Color LaserJet 2550Ln
Descripción
Printing software and utility
Sistema Operativo
Mac OS 9
Idioma
Japanese
Versión Utilities
4.1
Tamaño
3.9Mb
Nombre del archivo
clj2550mac9_x-jp.sit
Información
The HP LaserJet Installer provides HP LaserJet PostScript printing support for the Mac 9.1 and 9.2 operating systems.
Compañía
Hewlett Packard
Dispositivo
Impresoras y Plotters
Modelo
Hewlett Packard HP Color LaserJet 2550Ln
Descripción
Installer Print Only Software Solution for v10.2 v10.3.x v10.4.x v10.5
Sistema Operativo
Mac OS X
Idioma
Japanese
Versión Driver
7.8.0.761
Tamaño
29.1Mb
Nombre del archivo
hp_laserjet_and_edgeline_print-only.dmg
Fecha
28 Jan 2008
Información
This download package contains HP LaserJet Mac OS X Installer Print Only Software Solution v7.8.0.761. Included are the HP Postscript PPD and PDE files for Mac OS X v10.2, v10.3.x, v10.4.x, v10.5 - PPC and Intel processor.
Supported Devices
HP color LaserJet 2500
HP color LaserJet 2550 series
HP color LaserJet 3700
HP color LaserJet 4600
HP color LaserJet 4650
HP color LaserJet 5500
HP Color LaserJet 5550
HP Color LaserJet 8500
HP Color LaserJet 8550
HP color LaserJet 9500
HP color LaserJet 9500 MFP
HP Color LaserJet
HP Color LaserJet 5/5M
HP Color LaserJet 4500
HP Color LaserJet 4550
HP LaserJet 1200
HP LaserJet 1300
HP LaserJet 1300n
HP LaserJet 1320 series
HP LaserJet 2100 Series
HP LaserJet 2200
HP LaserJet 4000 Series
HP LaserJet 4050 Series
HP LaserJet 4100 MFP
HP LaserJet 4100 Series
HP LaserJet 4200
HP LaserJet 4200L
HP LaserJet 4240
HP LaserJet 4240N
HP LaserJet 4250
HP LaserJet 4250L
HP LaserJet 4300
HP LaserJet 4350
HP LaserJet 4350L
HP LaserJet 4V
HP LaserJet 5000 Series
HP LaserJet 5100 Series
HP LaserJet 8000 Series
HP LaserJet 8100 Series
HP LaserJet 8150 Series
HP LaserJet 9000 MFP
HP LaserJet 9000L MFP
HP LaserJet 9000 Series
HP LaserJet 9040
HP LaserJet 9040 MFP
HP LaserJet 9050 MFP
HP LaserJet 9050
HP LaserJet 9055 mfp
HP LaserJet 9065 mfp
HP LaserJet 4 Plus
HP LaserJet 4ML
HP LaserJet 4MP
HP LaserJet 4Si
HP LaserJet 5M
HP LaserJet 5P
HP LaserJet 5Si
HP LaserJet 5Si Mopier
HP LaserJet 6P
HP Mopier 240
HP Mopier 320
HP LaserJet 1220
HP LaserJet 3015
HP LaserJet 3020
HP LaserJet 3030
HP LaserJet 3200
HP LaserJet 3300/3310/3320
HP LaserJet 3300
HP LaserJet 3380
HP business inkjet 2300
HP Business Inkjet 2600
HP Business Inkjet 2800
HP Business Inkjet 3000
HP officejet 9100 series
HP Business Inkjet 2250
HP Business Inkjet 2280
Compañía
Hewlett Packard
Dispositivo
Impresoras y Plotters
Modelo
Hewlett Packard HP Color LaserJet 2550Ln
Descripción
Universal Print Driver PCL 5
Sistema Operativo
Windows 2000-2003-XP-Vista
Idioma
Japanese
Versión Driver
4.5
Tamaño
17.8Mb
Nombre del archivo
hpupd45pcl532.exe
Fecha
1 Apr 2008
Información
The UPD version 4.5 is the latest version of HP's Universal Print Driver. Please review the entire documentation for information on issues resolved, performance improvements, and new behavior changes to the UPD.
Compañía
Hewlett Packard
Dispositivo
Impresoras y Plotters
Modelo
Hewlett Packard HP Color LaserJet 2550Ln
Descripción
Universal Print Driver PostScript
Sistema Operativo
Windows 2000-2003-XP-Vista
Idioma
Japanese
Versión Driver
4.5
Tamaño
18.6Mb
Nombre del archivo
hpupd45ps32.exe
Fecha
1 Apr 2008
Información
The UPD version 4.5 is the latest version of HP's Universal Print Driver. Please review the entire documentation for information on issues resolved, performance improvements, and new behavior changes to the UPD.
Compañía
Hewlett Packard
Dispositivo
Impresoras y Plotters
Modelo
Hewlett Packard HP Color LaserJet 2550Ln
Descripción
PCL6 Driver
Sistema Operativo
Windows 2000-2003-XP-Vista
Idioma
Japanese
Versión Driver
4.5
Tamaño
18Mb
Nombre del archivo
hpupd45pcl632.exe
Fecha
1 Apr 2008
Información
The UPD version 4.5 is the latest version of HP's Universal Print Driver. Please review the entire documentation for information on issues resolved, performance improvements, and new behavior changes to the UPD.
Compañía
Hewlett Packard
Dispositivo
Impresoras y Plotters
Modelo
Hewlett Packard HP Color LaserJet 2550Ln
Descripción
Universal Print Driver x64 PostScript
Sistema Operativo
Windows 2003 64 bits-XP 64 bits-Vista 64 bits
Idioma
Japanese
Versión Driver
4.5
Tamaño
19Mb
Nombre del archivo
hpupd45ps64.exe
Fecha
1 Apr 2008
Información
The UPD version 4.5 is the latest version of HP's Universal Print Driver. Please review the entire documentation for information on issues resolved, performance improvements, and new behavior changes to the UPD.
Compañía
Hewlett Packard
Dispositivo
Impresoras y Plotters
Modelo
Hewlett Packard HP Color LaserJet 2550Ln
Descripción
PCL6 Driver
Sistema Operativo
Windows 2003 64 bits-XP 64 bits-Vista 64 bits
Idioma
Japanese
Versión Driver
4.5
Tamaño
18.2Mb
Nombre del archivo
hpupd45pcl664.exe
Fecha
1 Apr 2008
Información
The UPD version 4.5 is the latest version of HP's Universal Print Driver. Please review the entire documentation for information on issues resolved, performance improvements, and new behavior changes to the UPD.
Compañía
Hewlett Packard
Dispositivo
Impresoras y Plotters
Modelo
Hewlett Packard HP Color LaserJet 2550Ln
Descripción
PCL5 Driver
Sistema Operativo
Windows 2003 64 bits-XP 64 bits-Vista 64 bits
Idioma
Japanese
Versión Driver
4.5
Tamaño
18.2Mb
Nombre del archivo
hpupd45pcl564.exe
Fecha
1 Apr 2008
Información
The UPD version 4.5 is the latest version of HP's Universal Print Driver. Please review the entire documentation for information on issues resolved, performance improvements, and new behavior changes to the UPD.
Compañía
Hewlett Packard
Dispositivo
Impresoras y Plotters
Modelo
Hewlett Packard HP Color LaserJet 2550Ln
Descripción
Mobile Printing for Notebooks
Sistema Operativo
Windows NT4
Idioma
Japanese
Versión Driver
2.10
Tamaño
3.5Mb
Nombre del archivo
mobileprinting4notebooksnt4-jp.exe
Información
HP Mobile Printing for Notebooks (formally known as HP Mobile Printing Driver) is a software solution designed to facilitate printing from mobile notebook computers to network-connected Postscript-enabled HP printers.

As the notebook user moves around within the enterprise from floor to floor or from site to site, there is a need to print to networked printers that are encountered while away from the desk. HP Mobile Printing for Notebooks allows easy printing access to these newly encountered printers. There is no need to locate the printer driver or create a new network port. The user simply selects the HP Mobile Printing application, enters the network address (IP Address, hostname, or UNC pathname) of the target printer when prompted, and the print job is sent to the printer.

A Web JetAdmin plug-in has been developed to allow IT administrators to remotely enable display of the printer IP address on the printer control panel display. To download this plug-in, please visit the HP web jetadmin software and components download site.

If the printer IP address is not displayed, you may determine the IP address by printing a Configuration Page from the printer control panel menu.

Download and Installation

Note: Before proceeding with the software installation, be aware that administrator privileges are required to install the software and configure the printing system.

Close any screen savers, virus protection programs, or other software programs running on your computer.
Click on Download Now and a File Download box will appear.
Select Save This Program to Disk and a Save As box will appear.
Select a directory to save the file in and click Save.
Locate the file using Windows Explorer when the download has completed.
Double click on the file. This will begin the installation process. During the install, you may choose to make the HP Mobile Printing the default system printer on your computer.
When the installation is complete, a new system printer named HP Mobile Printing will be located in the Printers folder on your computer.
Compañía
Hewlett Packard
Dispositivo
Impresoras y Plotters
Modelo
Hewlett Packard HP Color LaserJet 2550Ln
Descripción
Printing software and utility
Sistema Operativo
Mac OS 9
Idioma
Korean
Versión Utilities
4.1
Tamaño
4Mb
Nombre del archivo
clj2550mac9_x-ko.sit
Información
The HP LaserJet Installer provides HP LaserJet PostScript printing support for the Mac 9.1 and 9.2 operating systems.
Compañía
Hewlett Packard
Dispositivo
Impresoras y Plotters
Modelo
Hewlett Packard HP Color LaserJet 2550Ln
Descripción
Installer
Sistema Operativo
Mac OS 9
Idioma
Korean
Versión Driver
4.1
Tamaño
4Mb
Nombre del archivo
clj2550installer-ko.sit
Información
HP Color LaserJet 2550 Installer for Mac OS 9.

Compañía
Hewlett Packard
Dispositivo
Impresoras y Plotters
Modelo
Hewlett Packard HP Color LaserJet 2550Ln
Descripción
Firmware Update utility
Sistema Operativo
Mac OS X
Idioma
Korean
Versión Firmware
20040930
Tamaño
5.6Mb
Nombre del archivo
2550_fw_update20040930.dmg
Fecha
28 Jul 2005
Información
WARNING: Determine what the current firmware version of your printer is before downloading the update. If your printer already has the current version (20040930), downloading this file might cause possible performance issues. To determine the version of firmware of your HP Color LaserJet 2550 printer, print a Configuration Page by pressing the Go button (green) and the Cancel button (Red) on the printer's control panel. The firmware version is listed on the top left part of the page, under Product Information - Firmware Datecode.

Firmware Enhancements

These changes are implemented in the new version firmware 20040930:
Default screenmatch color treatment for non-driver PostScript jobs.
Enabled to set FONTSOURCE to a downloaded soft font via PJL.
Cyrillic/Greek/Hebrew font settings now available
Improved memory allocation for complex pages.
The default I/O timeout changed to 120 seconds.
Printing from Mac systems, and printing PDF files, will have an improved CMYK color adjustment.
Calibration will now occur on non-HP refilled cartridge that have the e-label set to "toner out".
Unexpected Paper Size messages are now bypassed by pressing Go or Cancel from the Toolbox utility.
The Supplies Status page will now include the part number for HP cartridges when recognizing a non-HP cartridge installed.
Monochrome print speed will increase by choosing "Print to Grayscale" in the driver's Color tab.

Note: This utility is in English only.

* You will need 20MB of disk space to use the Firmware Update Utility.

* The HP Color LaserJet 2550 series printer must be in a READY state and remain powered on during the entire firmware update process.

* The control panel of the printer will display a series of flashing lights.

* After the Firmware Update Utility has finished, the HP Color LaserJet 2550 series printer will display a solid green Ready light (second from the bottom). You may be prompted to reboot your computer.


Installation Instructions

(NOTE! If you use Internet Explorer to download the utility, it may strip the .dmg extension to the file. Simply re-add the .dmg extension and MAC OS X should recognize the file as a disk image)

This utility is for use on any OS X 10.2 or 10.3 Mac. It will NOT function in the MAC OS 9 environment.

It can only be used with a USB connection to the HP Color LaserJet 2550.

Instructions for upgrade

* For users connected via the network, please temporarily disconnect your HP Color LaserJet 2550 series printer from the network to ensure the network devices to not interrupt the FW upgrade process.
Mount the disk image containing the FW update.
Run the FW Update Application contained in the disk image.
Follow the onscreen prompts to continue.
When prompted, connect the printer via USB.
Upon finding an HP Color LaserJet 2550 series printer, the utility will prompt you to reboot the printer by simply turn the power off and back on. This ensures the printer is in a proper state to receive the update.
Once the printer has been rebooted, the utility will allow you to 'download' the firmware to the HP Color LaserJet 2550 series printer.
DO NOT POWER CYCLE THE PRINTER during the upgrade process or it will leave your printer in an unusable state.
One green LED will start flashing initially followed by 2 LED's flashing.
Once the LEDS stop flashing, the printer has updated and re-initialized, the firmware should be updated.
The firmware update can take up to 5 minutes to complete. Please be patient.
Compañía
Hewlett Packard
Dispositivo
Impresoras y Plotters
Modelo
Hewlett Packard HP Color LaserJet 2550Ln
Descripción
Installer Print Only Software Solution for v10.2 v10.3.x v10.4.x v10.5
Sistema Operativo
Mac OS X
Idioma
Korean
Versión Driver
7.8.0.761
Tamaño
29.1Mb
Nombre del archivo
hp_laserjet_and_edgeline_print-only.dmg
Fecha
28 Jan 2008
Información
This download package contains HP LaserJet Mac OS X Installer Print Only Software Solution v7.8.0.761. Included are the HP Postscript PPD and PDE files for Mac OS X v10.2, v10.3.x, v10.4.x, v10.5 - PPC and Intel processor.
Supported Devices
HP color LaserJet 2500
HP color LaserJet 2550 series
HP color LaserJet 3700
HP color LaserJet 4600
HP color LaserJet 4650
HP color LaserJet 5500
HP Color LaserJet 5550
HP Color LaserJet 8500
HP Color LaserJet 8550
HP color LaserJet 9500
HP color LaserJet 9500 MFP
HP Color LaserJet
HP Color LaserJet 5/5M
HP Color LaserJet 4500
HP Color LaserJet 4550
HP LaserJet 1200
HP LaserJet 1300
HP LaserJet 1300n
HP LaserJet 1320 series
HP LaserJet 2100 Series
HP LaserJet 2200
HP LaserJet 4000 Series
HP LaserJet 4050 Series
HP LaserJet 4100 MFP
HP LaserJet 4100 Series
HP LaserJet 4200
HP LaserJet 4200L
HP LaserJet 4240
HP LaserJet 4240N
HP LaserJet 4250
HP LaserJet 4250L
HP LaserJet 4300
HP LaserJet 4350
HP LaserJet 4350L
HP LaserJet 4V
HP LaserJet 5000 Series
HP LaserJet 5100 Series
HP LaserJet 8000 Series
HP LaserJet 8100 Series
HP LaserJet 8150 Series
HP LaserJet 9000 MFP
HP LaserJet 9000L MFP
HP LaserJet 9000 Series
HP LaserJet 9040
HP LaserJet 9040 MFP
HP LaserJet 9050 MFP
HP LaserJet 9050
HP LaserJet 9055 mfp
HP LaserJet 9065 mfp
HP LaserJet 4 Plus
HP LaserJet 4ML
HP LaserJet 4MP
HP LaserJet 4Si
HP LaserJet 5M
HP LaserJet 5P
HP LaserJet 5Si
HP LaserJet 5Si Mopier
HP LaserJet 6P
HP Mopier 240
HP Mopier 320
HP LaserJet 1220
HP LaserJet 3015
HP LaserJet 3020
HP LaserJet 3030
HP LaserJet 3200
HP LaserJet 3300/3310/3320
HP LaserJet 3300
HP LaserJet 3380
HP business inkjet 2300
HP Business Inkjet 2600
HP Business Inkjet 2800
HP Business Inkjet 3000
HP officejet 9100 series
HP Business Inkjet 2250
HP Business Inkjet 2280
Compañía
Hewlett Packard
Dispositivo
Impresoras y Plotters
Modelo
Hewlett Packard HP Color LaserJet 2550Ln
Descripción
PostScript Driver
Sistema Operativo
Windows 2000-2003-XP
Idioma
Korean
Versión Driver
60.34.78.41
Tamaño
5.3Mb
Nombre del archivo
clj2550pswin2kxp2003-ko.exe
Información
Enhancements

Incorporated JPEG compression to reduce spool file size.
Resolves spoolsv.exe crash when printing some PowerPoint documents.
Control Panel simulator in the Services tab is now functional.

This section will help you in the download of the software to your computer and start you on the install process.
Before proceeding with the software installation, the printer must first be properly set up, and your computer must be ready to print.

DOWNLOAD AND EXTRACT THE SOFTWARE

Close any screen savers, virus protection programs, or other software programs running on your computer.
Click on Download Now and a File Download box will appear.
Select Save This Program to Disk and a Save As box will appear.
Select a directory to save the file in and click Save.
Locate the file using Windows Explorer when the download has completed.
Double click on the file. This will extract all the driver files into a directory on your hard drive. The directory these files are extracted to will have a similar name to the file that was downloaded (i.e., c:\clj2550ps). However, you can change the path and directory name at the time of extracting the file.
PLEASE USE THESE STEPS IF YOU ARE UPDATING THE HP COLOR LASERJET 2550 DRIVER
From the Windows XP desktop, click Start, and then Printers and Faxes (for Windows 2000, click Start, Settings and then Printers).
Right click on the hp color LaserJet 2550 PostScript icon or listing, and then click Properties.
Click the Advanced tab.
Make certain the Driver box displays hp color LaserJet 2550 PostScript, and then click New Driver.
In the Add Printer Driver Wizard window, click Have Disk, and then Browse.
Browse to the directory that the downloaded files where unzipped to.

NOTE: The default directory would be c:\clj2550pswin2kxp2003-xx (xx represents language, such as en for English)

The Look in box will display clj2550pswin2kxp2003-xx (xx represents language, such as en for English). Do not open any folders in this directory. The autorun.ini file should be in the File name box. Click Open.
On the Install From Disk window, click OK. The print driver name, hp color LaserJet 2550 PostScript, should be displayed. Click Next to continue.
When the update is finished, click OK to close the hp color LaserJet 2550 PostScript Properties window. The update is now complete.
PLEASE USE THESE STEPS IF THIS IS A FIRST TIME INSTALLATION OF THE HP COLOR LASERJET 2550 DRIVER:
Attach a USB or parallel cable to the printer and the computer.
The "Found New Hardware Wizard" should appear. Note: If attaching via a parallel cable it may be necessary to restart the computer for the "Found New Hardware Wizard" to appear.
For Windows XP
Choose "Install from a list or specific location (advanced)" and then click Next.
Select only the box next to "Include this location in the search" (clear all other check boxes) then click the browse button to locate the directory where the driver was extracted to in the steps above. The directory these files are extracted to will have a similar name to the file that was downloaded (i.e., c:\clj2550ps).
Click once on the directory name to highlight it then choose OK. The directory path then appears in the dialog.
Select the Next button. Files will be copied to the appropriate directories automatically.
Click the Finish button within the "New Hardware Wizard"
After several moments and message will appear on the system tray (at the bottom right of the screen near the clock) indicating that "Your new hardware has been installed and is ready to use.

For Windows 2000
Click the Next button to continue.
Choose "Search for a suitable driver form my device (recommended)" and then click Next.
Select only the box next to "Specify a location" (clear all other check boxes) and click Next.
Click the browse button to locate the directory where the driver was extracted to in the steps above. The directory these files are extracted to will have a similar name to the file that was downloaded (i.e., c:\clj2550ps).
Click once on the directory name to highlight it and then select the Open button.
Autorun.inf should appear in the "file name" box. Click the Open button.
Select OK. The wizard will find the driver for the device.
Click the Next button.
Click Finish. Several dialogs will appear and then disappear.
The printer driver is now installed.
Compañía
Hewlett Packard
Dispositivo
Impresoras y Plotters
Modelo
Hewlett Packard HP Color LaserJet 2550Ln
Descripción
PCL6 Driver
Sistema Operativo
Windows 2000-2003-XP
Idioma
Korean
Versión Driver
60.34.78.41
Tamaño
5.5Mb
Nombre del archivo
clj2550pcl6win2kxp2003-ko.exe
Información
Enhancements

Incorporated JPEG compression to reduce spool file size.
Resolves spoolsv.exe crash when printing some PowerPoint documents.
Control Panel simulator in the Services tab is now functional.

This section will help you in the download of the software to your computer and start you on the install process.
Before proceeding with the software installation, the printer must first be properly set up, and your computer must be ready to print.

DOWNLOAD AND EXTRACT THE SOFTWARE

Close any screen savers, virus protection programs, or other software programs running on your computer.
Click on Download Now and a File Download box will appear.
Select Save This Program to Disk and a Save As box will appear.
Select a directory to save the file in and click Save.
Locate the file using Windows Explorer when the download has completed.
Double click on the file. This will extract all the driver files into a directory on your hard drive. The directory these files are extracted to will have a similar name to the file that was downloaded (i.e., c:\clj2550pcl6). However, you can change the path and directory name at the time of extracting the file.
PLEASE USE THESE STEPS IF YOU ARE UPDATING THE HP COLOR LASERJET 2550 DRIVER
From the Windows XP desktop, click Start, and then Printers and Faxes (for Windows 2000, click Start, Settings and then Printers).
Right click on the hp color LaserJet 2550 PCL6 icon or listing, and then click Properties.
Click the Advanced tab.
Make certain the Driver box displays hp color LaserJet 2550 PCL6, and then click New Driver.
In the Add Printer Driver Wizard window, click Have Disk, and then Browse.
Browse to the directory that the downloaded files where unzipped to.

NOTE: The default directory would be C:\clj2550pcl6 (xx represents language, such as en for English)

The Look in box will display clj2550pcl6win2kxp2003-xx (xx represents language, such as en for English). Do not open any folders in this directory. The autorun.ini file should be in the File name box. Click Open.
On the Install From Disk window, click OK. The print driver name, hp color LaserJet 2550 PCL6, should be displayed. Click Next to continue.
When the update is finished, click OK to close the hp color LaserJet 2550 PCL6 Properties window. The update is now complete.
PLEASE USE THESE STEPS IF THIS IS A FIRST TIME INSTALLATION OF THE HP COLOR LASERJET 2550 DRIVER:
Attach a USB or parallel cable to the printer and the computer.
The "Found New Hardware Wizard" should appear. Note: If attaching via a parallel cable it may be necessary to restart the computer for the "Found New Hardware Wizard" to appear.
For Windows XP
Choose "Install from a list or specific location (advanced)" and then click Next.
Select only the box next to "Include this location in the search" (clear all other check boxes) then click the browse button to locate the directory where the driver was extracted to in the steps above. The directory these files are extracted to will have a similar name to the file that was downloaded (i.e., c:\clj2550pcl6).
Click once on the directory name to highlight it then choose OK. The directory path then appears in the dialog.
Select the Next button. Files will be copied to the appropriate directories automatically.
Click the Finish button within the "New Hardware Wizard"
After several moments and message will appear on the system tray (at the bottom right of the screen near the clock) indicating that "Your new hardware has been installed and is ready to use.

For Windows 2000
Click the Next button to continue.
Choose "Search for a suitable driver form my device (recommended)" and then click Next.
Select only the box next to "Specify a location" (clear all other check boxes) and click Next.
Click the browse button to locate the directory where the driver was extracted to in the steps above. The directory these files are extracted to will have a similar name to the file that was downloaded (i.e., c:\clj2550pcl6).
Click once on the directory name to highlight it and then select the Open button.
Autorun.inf should appear in the "file name" box. Click the Open button.
Select OK. The wizard will find the driver for the device.
Click the Next button.
Click Finish. Several dialogs will appear and then disappear.
The printer driver is now installed.
Compañía
Hewlett Packard
Dispositivo
Impresoras y Plotters
Modelo
Hewlett Packard HP Color LaserJet 2550Ln
Descripción
PCL6 Driver
Sistema Operativo
Windows 2000-2003-XP-Vista
Idioma
Korean
Versión Driver
4.5
Tamaño
18Mb
Nombre del archivo
hpupd45pcl632.exe
Fecha
1 Apr 2008
Información
The UPD version 4.5 is the latest version of HP's Universal Print Driver. Please review the entire documentation for information on issues resolved, performance improvements, and new behavior changes to the UPD.
Compañía
Hewlett Packard
Dispositivo
Impresoras y Plotters
Modelo
Hewlett Packard HP Color LaserJet 2550Ln
Descripción
Universal Print Driver PostScript
Sistema Operativo
Windows 2000-2003-XP-Vista
Idioma
Korean
Versión Driver
4.5
Tamaño
18.6Mb
Nombre del archivo
hpupd45ps32.exe
Fecha
1 Apr 2008
Información
The UPD version 4.5 is the latest version of HP's Universal Print Driver. Please review the entire documentation for information on issues resolved, performance improvements, and new behavior changes to the UPD.
Compañía
Hewlett Packard
Dispositivo
Impresoras y Plotters
Modelo
Hewlett Packard HP Color LaserJet 2550Ln
Descripción
Universal Print Driver PCL 5
Sistema Operativo
Windows 2000-2003-XP-Vista
Idioma
Korean
Versión Driver
4.5
Tamaño
17.8Mb
Nombre del archivo
hpupd45pcl532.exe
Fecha
1 Apr 2008
Información
The UPD version 4.5 is the latest version of HP's Universal Print Driver. Please review the entire documentation for information on issues resolved, performance improvements, and new behavior changes to the UPD.
Compañía
Hewlett Packard
Dispositivo
Impresoras y Plotters
Modelo
Hewlett Packard HP Color LaserJet 2550Ln
Descripción
Universal Print Driver x64 PostScript
Sistema Operativo
Windows 2003 64 bits-XP 64 bits-Vista 64 bits
Idioma
Korean
Versión Driver
4.5
Tamaño
19Mb
Nombre del archivo
hpupd45ps64.exe
Fecha
1 Apr 2008
Información
The UPD version 4.5 is the latest version of HP's Universal Print Driver. Please review the entire documentation for information on issues resolved, performance improvements, and new behavior changes to the UPD.
Compañía
Hewlett Packard
Dispositivo
Impresoras y Plotters
Modelo
Hewlett Packard HP Color LaserJet 2550Ln
Descripción
PCL6 Driver
Sistema Operativo
Windows 2003 64 bits-XP 64 bits-Vista 64 bits
Idioma
Korean
Versión Driver
4.5
Tamaño
18.2Mb
Nombre del archivo
hpupd45pcl664.exe
Fecha
1 Apr 2008
Información
The UPD version 4.5 is the latest version of HP's Universal Print Driver. Please review the entire documentation for information on issues resolved, performance improvements, and new behavior changes to the UPD.
Compañía
Hewlett Packard
Dispositivo
Impresoras y Plotters
Modelo
Hewlett Packard HP Color LaserJet 2550Ln
Descripción
PCL5 Driver
Sistema Operativo
Windows 2003 64 bits-XP 64 bits-Vista 64 bits
Idioma
Korean
Versión Driver
4.5
Tamaño
18.2Mb
Nombre del archivo
hpupd45pcl564.exe
Fecha
1 Apr 2008
Información
The UPD version 4.5 is the latest version of HP's Universal Print Driver. Please review the entire documentation for information on issues resolved, performance improvements, and new behavior changes to the UPD.
Compañía
Hewlett Packard
Dispositivo
Impresoras y Plotters
Modelo
Hewlett Packard HP Color LaserJet 2550Ln
Descripción
PCL6 Plug and Play Bundle
Sistema Operativo
Windows 98-Me-2000-2003-XP
Idioma
Korean
Versión Driver
2.0
Tamaño
11.7Mb
Nombre del archivo
clj2550pcl6-ko.exe
Información
Use this software for first time USB installations only. Do NOT attach USB cable until prompted by the installation program

If upgrading a previous installation please use the "HP Color LaserJet 2550 PCL6 driver" download and view the description which includes instructions for updating the driver.

HP Color LaserJet 2550 PCL6 Plug and Play Bundle provides the following:

An installation program to assist with installation.
The print drivers are the same as those found on the version 2.0 CD.
Windows 98/ME: 4.24.2550.400
Windows 2000/XP/2003: 60.034.78.41
Plug and Play installable drivers for 1284.4 communication with the device.
Plug and Play installable PCL6 printer driver.
The product CD can be used at a later time to install additional product software, such as Toolbox.
A silent install is provided by running the program from a DOS prompt with the following command line parameters:
lj2550pcl6-en.exe -s -a -silent

This section will help you in the download of the software to your computer and start you on the install process.
Before proceeding with the software installation, the printer must first be properly set up, and your computer must be ready to print.
Close any screen savers, virus protection programs, or other software programs running on your computer.
Click on Download Now and a File Download box will appear.
Select Save This Program to Disk and a Save As box will appear.
Select a directory to save the file in and click Save.
Locate the file using Windows Explorer when the download has completed.
Double click on the file. This will extract all the driver files into a directory on your hard drive. The default directory is Program Files\Hewlett-Packard\Color LaserJet 2550 Drivers. However, you can change the path and directory name at the time of extracting the file.
Follow the instructions presented by the installation program. Do NOT attach the USB cable to the printer until prompted by the installation program.
Compañía
Hewlett Packard
Dispositivo
Impresoras y Plotters
Modelo
Hewlett Packard HP Color LaserJet 2550Ln
Descripción
Firmware Update utility
Sistema Operativo
Windows 98-Me-2000-XP
Idioma
Korean
Versión Firmware
20040930
Tamaño
6.2Mb
Nombre del archivo
flash_5f2550_20040930_rev2.exe
Fecha
11 Oct 2004
Información
WARNING: Determine what the current firmware version of your printer is before downloading the update. If your printer already has the current version (20040930), downloading this file might cause possible performance issues. To determine the version of firmware of your HP Color LaserJet 2550 printer, print a Configuration Page by pressing the Go button (green) and the Cancel button (Red) on the printer's control panel. The firmware version is listed on the top left part of the page, under Product Information - Firmware Datecode.
Firmware Enhancements

These changes are implemented in the new version firmware 20040930:
Default screenmatch color treatment for non-driver PostScript jobs.
Enabled to set FONTSOURCE to a downloaded soft font via PJL.
Cyrillic/Greek/Hebrew font settings now available
Improved memory allocation for complex pages.
The default I/O timeout changed to 120 seconds.
Printing from Mac systems, and printing PDF files, will have an improved CMYK color adjustment.
Calibration will now occur on non-HP refilled cartridge that have the e-label set to "toner out".
Unexpected Paper Size messages are now bypassed by pressing Go or Cancel from the Toolbox utility.
The Supplies Status page will now include the part number for HP cartridges when recognizing a non-HP cartridge installed.
Monochrome print speed will increase by choosing "Print to Grayscale" in the driver's Color tab

Note: This utility is in English only.

* The HP Color LaserJet 2550 series Firmware Update Utility can be performed using either a Parallel or USB port.
When using the USB port, the HP Color LaserJet 2550 series software must be installed prior to using this utility.
When using the parallel port, the HP Color LaserJet 2550 series software does not need to be installed. Connect the 2550 series printer to a PC with the Firmware Update Utility loaded using a parallel cable.
* You will need 20MB of disk space to use the Firmware Update Utility.

* The HP Color LaserJet 2550 series printer must be in a READY state and remain powered on during the entire firmware update process.

* Administrator Privileges are required on the PC executing the utility.

* The control panel of the printer will display a series of flashing lights.

* After the Firmware Update Utility has finished, the HP Color LaserJet 2550 series printer will display a solid green Ready light (second from the bottom). Depending on the operating system on your PC, you may be prompted to reboot your computer.

This utility is for use on Windows 95, 98, ME, 2000 and XP. It can ONLY be used with parallel or USB connections.


Installation Instructions

* For users connected via the network, please temporarily disconnect your HP Color LaserJet 2550 series printer from the network to ensure the network devices to not interrupt the firmware upgrade process.

Parallel Cable connection
Connect a PC to the HP Color LaserJet 2550 series printer via a parallel cable.
You do not need to install the HP software for parallel upgrades.
If the "Add Hardware" wizard starts when you plug in the parallel cable, you can safely cancel it.
Double click the Flash Update utility.
Click 'OK' to begin the process. The utility will go through the following steps:
Close all toolbox and HP software running on the host PC.
Upload firmware to printer, at which point the printer lights will start flashing until complete.
Printer will then erase the old firmware and write the new firmware and reboot it.
Utility will prompt user to reboot PC (to synchronize the printer, restart Toolbox and the HP software)
DO NOT POWER CYCLE THE PRINTER during the upgrade process or it will leave your printer in an unusable state.
Once the utility is complete, it will prompt you to reboot your PC and printer to synchronize the printer and the HP Toolbox.
The firmware update can take up to 5 minutes to complete. Please be patient.
USB Connection
In order to use USB to update your printer, you must have the HP Color LaserJet 2550 series printer software installed on your PC.
You do NOT need to have toolbox installed. A driver only installation will work fine.
Ensure your HP Color LaserJet 2550 series printer is connected to the USB cable.
Double click the Flash Update utility.
Click 'OK' to begin the process. The utility will go through the following steps:
Close all Toolbox and HP software running on host PC.
Upload firmware to printer, at which point the printer lights will flash until complete.
Printer will then erase the old firmware and write the new firmware and reboot itself.
Utility will prompt user to reboot PC (to resync printer, restart toolbox and HP software)
DO NOT POWER CYCLE THE PRINTER during the upgrade process or it will leave your printer in an unusable state.
Once the utility is complete, it will prompt you to reboot your PC and printer to resync the printer and the HP Toolbox.
The firmware update can take up to 5 minutes to complete. Please be patient.
Compañía
Hewlett Packard
Dispositivo
Impresoras y Plotters
Modelo
Hewlett Packard HP Color LaserJet 2550Ln
Descripción
PostScript Driver
Sistema Operativo
Windows NT4
Idioma
Korean
Versión Driver
034.4100
Tamaño
1Mb
Nombre del archivo
clj2550pswinnt4-ko.exe
Información
This section will help you in the download of the software to your computer and start you on the install process.
Before proceeding with the software installation, the printer must first be properly set up, and your computer must be ready to print.
Turn on the printer first, then turn on the computer.
Close any screen savers, virus protection programs, or other software programs running on your computer.
Click on Download Now and a File Download box will appear.
Select Save This Program to Disk and a Save As box will appear.
Select a directory to save the file in and click Save.
Locate the file using Windows Explorer when the download has completed.
Double click on the file. This will extract all the driver files into a directory on your hard drive. The directory these files are extracted to will have a similar name to the file that was downloaded (i.e., c:\clj2550ps). However, you can change the path and directory name at the time of extracting the file.
Open the Printers Window (Click Start-Settings-Printers).
Update the printer if it was previously installed
Right click on the printer and select Properties from the pop menu.
On the General tab, select New Driver.
Click on the Warning Box that pops up.
A printer listing box will appear. Select Have Disk.
Another box Install from Disk appears.
Click the Browse to locate the expanded files directory (i.e., c:\clj2550ps).
Click on the file ending with .inf .
Click Open and then OK and let files install.
Add the printer if it hasn't been installed yet.
Click Add New Printer
Follow the instructions of the Add Printer Wizard.
Compañía
Hewlett Packard
Dispositivo
Impresoras y Plotters
Modelo
Hewlett Packard HP Color LaserJet 2550Ln
Descripción
PCL6 Driver
Sistema Operativo
Windows NT4
Idioma
Korean
Versión Driver
4.24.2550.400
Tamaño
2.9Mb
Nombre del archivo
clj2550pcl6winnt4-ko.exe
Información
This section will help you in the download of the software to your computer and start you on the install process.
Before proceeding with the software installation, the printer must first be properly set up, and your computer must be ready to print.
Turn on the printer first, then turn on the computer.
Close any screen savers, virus protection programs, or other software programs running on your computer.
Click on Download Now and a File Download box will appear.
Select Save This Program to Disk and a Save As box will appear.
Select a directory to save the file in and click Save.
Locate the file using Windows Explorer when the download has completed.
Double click on the file. This will extract all the driver files into a directory on your hard drive. The directory these files are extracted to will have a similar name to the file that was downloaded (i.e., c:\clj2550pcl6). However, you can change the path and directory name at the time of extracting the file.
Open the Printers Window (Click Start-Settings-Printers).
Update the printer if it was previously installed
Right click on the printer and select Properties from the pop menu.
On the General tab, select New Driver.
Click on the Warning Box that pops up.
A printer listing box will appear. Select Have Disk.
Another box Install from Disk appears.
Click the Browse to locate the expanded files directory (i.e., c:\clj2550pcl6).
Click on the file ending with .inf .
Click Open and then OK and let files install.
Add the printer if it hasn't been installed yet.
Click Add New Printer
Follow the instructions of the Add Printer Wizard.
Compañía
Hewlett Packard
Dispositivo
Impresoras y Plotters
Modelo
Hewlett Packard HP Color LaserJet 2550Ln
Descripción
Mobile Printing for Notebooks
Sistema Operativo
Windows NT4
Idioma
Korean
Versión Driver
2.10
Tamaño
3.4Mb
Nombre del archivo
mobileprinting4notebooksnt4-ko.exe
Información
HP Mobile Printing for Notebooks (formally known as HP Mobile Printing Driver) is a software solution designed to facilitate printing from mobile notebook computers to network-connected Postscript-enabled HP printers.

As the notebook user moves around within the enterprise from floor to floor or from site to site, there is a need to print to networked printers that are encountered while away from the desk. HP Mobile Printing for Notebooks allows easy printing access to these newly encountered printers. There is no need to locate the printer driver or create a new network port. The user simply selects the HP Mobile Printing application, enters the network address (IP Address, hostname, or UNC pathname) of the target printer when prompted, and the print job is sent to the printer.

A Web JetAdmin plug-in has been developed to allow IT administrators to remotely enable display of the printer IP address on the printer control panel display. To download this plug-in, please visit the HP web jetadmin software and components download site.

If the printer IP address is not displayed, you may determine the IP address by printing a Configuration Page from the printer control panel menu.

Download and Installation

Note: Before proceeding with the software installation, be aware that administrator privileges are required to install the software and configure the printing system.

Close any screen savers, virus protection programs, or other software programs running on your computer.
Click on Download Now and a File Download box will appear.
Select Save This Program to Disk and a Save As box will appear.
Select a directory to save the file in and click Save.
Locate the file using Windows Explorer when the download has completed.
Double click on the file. This will begin the installation process. During the install, you may choose to make the HP Mobile Printing the default system printer on your computer.
When the installation is complete, a new system printer named HP Mobile Printing will be located in the Printers folder on your computer.
Compañía
Hewlett Packard
Dispositivo
Impresoras y Plotters
Modelo
Hewlett Packard HP Color LaserJet 2550Ln
Descripción
Removal Tool
Sistema Operativo
Windows NT4-2000-XP
Idioma
Korean
Versión Driver
1.0.0.1
Tamaño
316Kb
Nombre del archivo
setconfig_exermtool.exe
Fecha
3 Jun 2005
Información
Download Info
If the following error message is encountered, please install this file for resolution.

This error message may occur with the following Hewlett-Packard LaserJet devices:
LaserJet 1010/1012/1015 Series
LaserJet 1150
LaserJet 1160
LaserJet 1300 Series
LaserJet 1320 Series
LaserJet 3015/3020/3030/3380 Series
Color LaserJet 2550
Note: If the error is encountered, it will be after the initial printer software install and upon consequential system reboots.

This section will help you in the download of the software to your computer and start you on the install process.
Close any screen savers, virus protection programs, or other software programs running on your computer.
Click on Download and a File Download box will appear.
Select Save This Program to Disk and a Save As box will appear.
Select a directory to save the file in and click Save.
Locate the file using Windows Explorer when the download has completed.
Double click on the file. It will execute and install the necessary files.




Compañía
Hewlett Packard
Dispositivo
Impresoras y Plotters
Modelo
Hewlett Packard HP Color LaserJet 2550Ln
Descripción
Installer
Sistema Operativo
Mac OS 9
Idioma
Norwegian
Versión Driver
4.1
Tamaño
4Mb
Nombre del archivo
clj2550installer-no.sit
Información
HP Color LaserJet 2550 Installer for Mac OS 9.

Compañía
Hewlett Packard
Dispositivo
Impresoras y Plotters
Modelo
Hewlett Packard HP Color LaserJet 2550Ln
Descripción
Printing software and utility
Sistema Operativo
Mac OS 9
Idioma
Norwegian
Versión Utilities
4.1
Tamaño
4Mb
Nombre del archivo
clj2550mac9_x-no.sit
Información
The HP LaserJet Installer provides HP LaserJet PostScript printing support for the Mac 9.1 and 9.2 operating systems.
Compañía
Hewlett Packard
Dispositivo
Impresoras y Plotters
Modelo
Hewlett Packard HP Color LaserJet 2550Ln
Descripción
Installer Print Only Software Solution for v10.2 v10.3.x v10.4.x v10.5
Sistema Operativo
Mac OS X
Idioma
Norwegian
Versión Driver
7.8.0.761
Tamaño
29.1Mb
Nombre del archivo
hp_laserjet_and_edgeline_print-only.dmg
Fecha
28 Jan 2008
Información
This download package contains HP LaserJet Mac OS X Installer Print Only Software Solution v7.8.0.761. Included are the HP Postscript PPD and PDE files for Mac OS X v10.2, v10.3.x, v10.4.x, v10.5 - PPC and Intel processor.
Supported Devices
HP color LaserJet 2500
HP color LaserJet 2550 series
HP color LaserJet 3700
HP color LaserJet 4600
HP color LaserJet 4650
HP color LaserJet 5500
HP Color LaserJet 5550
HP Color LaserJet 8500
HP Color LaserJet 8550
HP color LaserJet 9500
HP color LaserJet 9500 MFP
HP Color LaserJet
HP Color LaserJet 5/5M
HP Color LaserJet 4500
HP Color LaserJet 4550
HP LaserJet 1200
HP LaserJet 1300
HP LaserJet 1300n
HP LaserJet 1320 series
HP LaserJet 2100 Series
HP LaserJet 2200
HP LaserJet 4000 Series
HP LaserJet 4050 Series
HP LaserJet 4100 MFP
HP LaserJet 4100 Series
HP LaserJet 4200
HP LaserJet 4200L
HP LaserJet 4240
HP LaserJet 4240N
HP LaserJet 4250
HP LaserJet 4250L
HP LaserJet 4300
HP LaserJet 4350
HP LaserJet 4350L
HP LaserJet 4V
HP LaserJet 5000 Series
HP LaserJet 5100 Series
HP LaserJet 8000 Series
HP LaserJet 8100 Series
HP LaserJet 8150 Series
HP LaserJet 9000 MFP
HP LaserJet 9000L MFP
HP LaserJet 9000 Series
HP LaserJet 9040
HP LaserJet 9040 MFP
HP LaserJet 9050 MFP
HP LaserJet 9050
HP LaserJet 9055 mfp
HP LaserJet 9065 mfp
HP LaserJet 4 Plus
HP LaserJet 4ML
HP LaserJet 4MP
HP LaserJet 4Si
HP LaserJet 5M
HP LaserJet 5P
HP LaserJet 5Si
HP LaserJet 5Si Mopier
HP LaserJet 6P
HP Mopier 240
HP Mopier 320
HP LaserJet 1220
HP LaserJet 3015
HP LaserJet 3020
HP LaserJet 3030
HP LaserJet 3200
HP LaserJet 3300/3310/3320
HP LaserJet 3300
HP LaserJet 3380
HP business inkjet 2300
HP Business Inkjet 2600
HP Business Inkjet 2800
HP Business Inkjet 3000
HP officejet 9100 series
HP Business Inkjet 2250
HP Business Inkjet 2280
Compañía
Hewlett Packard
Dispositivo
Impresoras y Plotters
Modelo
Hewlett Packard HP Color LaserJet 2550Ln
Descripción
Firmware Update utility
Sistema Operativo
Mac OS X
Idioma
Norwegian
Versión Firmware
20040930
Tamaño
5.6Mb
Nombre del archivo
2550_fw_update20040930.dmg
Fecha
28 Jul 2005
Información
WARNING: Determine what the current firmware version of your printer is before downloading the update. If your printer already has the current version (20040930), downloading this file might cause possible performance issues. To determine the version of firmware of your HP Color LaserJet 2550 printer, print a Configuration Page by pressing the Go button (green) and the Cancel button (Red) on the printer's control panel. The firmware version is listed on the top left part of the page, under Product Information - Firmware Datecode.

Firmware Enhancements

These changes are implemented in the new version firmware 20040930:
Default screenmatch color treatment for non-driver PostScript jobs.
Enabled to set FONTSOURCE to a downloaded soft font via PJL.
Cyrillic/Greek/Hebrew font settings now available
Improved memory allocation for complex pages.
The default I/O timeout changed to 120 seconds.
Printing from Mac systems, and printing PDF files, will have an improved CMYK color adjustment.
Calibration will now occur on non-HP refilled cartridge that have the e-label set to "toner out".
Unexpected Paper Size messages are now bypassed by pressing Go or Cancel from the Toolbox utility.
The Supplies Status page will now include the part number for HP cartridges when recognizing a non-HP cartridge installed.
Monochrome print speed will increase by choosing "Print to Grayscale" in the driver's Color tab.

Note: This utility is in English only.

* You will need 20MB of disk space to use the Firmware Update Utility.

* The HP Color LaserJet 2550 series printer must be in a READY state and remain powered on during the entire firmware update process.

* The control panel of the printer will display a series of flashing lights.

* After the Firmware Update Utility has finished, the HP Color LaserJet 2550 series printer will display a solid green Ready light (second from the bottom). You may be prompted to reboot your computer.


Installation Instructions

(NOTE! If you use Internet Explorer to download the utility, it may strip the .dmg extension to the file. Simply re-add the .dmg extension and MAC OS X should recognize the file as a disk image)

This utility is for use on any OS X 10.2 or 10.3 Mac. It will NOT function in the MAC OS 9 environment.

It can only be used with a USB connection to the HP Color LaserJet 2550.

Instructions for upgrade

* For users connected via the network, please temporarily disconnect your HP Color LaserJet 2550 series printer from the network to ensure the network devices to not interrupt the FW upgrade process.
Mount the disk image containing the FW update.
Run the FW Update Application contained in the disk image.
Follow the onscreen prompts to continue.
When prompted, connect the printer via USB.
Upon finding an HP Color LaserJet 2550 series printer, the utility will prompt you to reboot the printer by simply turn the power off and back on. This ensures the printer is in a proper state to receive the update.
Once the printer has been rebooted, the utility will allow you to 'download' the firmware to the HP Color LaserJet 2550 series printer.
DO NOT POWER CYCLE THE PRINTER during the upgrade process or it will leave your printer in an unusable state.
One green LED will start flashing initially followed by 2 LED's flashing.
Once the LEDS stop flashing, the printer has updated and re-initialized, the firmware should be updated.
The firmware update can take up to 5 minutes to complete. Please be patient.
Compañía
Hewlett Packard
Dispositivo
Impresoras y Plotters
Modelo
Hewlett Packard HP Color LaserJet 2550Ln
Descripción
PostScript Driver
Sistema Operativo
Windows 2000-2003-XP
Idioma
Norwegian
Versión Driver
60.34.78.41
Tamaño
5.3Mb
Nombre del archivo
clj2550pswin2kxp2003-no.exe
Información
Enhancements

Incorporated JPEG compression to reduce spool file size.
Resolves spoolsv.exe crash when printing some PowerPoint documents.
Control Panel simulator in the Services tab is now functional.

This section will help you in the download of the software to your computer and start you on the install process.
Before proceeding with the software installation, the printer must first be properly set up, and your computer must be ready to print.

DOWNLOAD AND EXTRACT THE SOFTWARE

Close any screen savers, virus protection programs, or other software programs running on your computer.
Click on Download Now and a File Download box will appear.
Select Save This Program to Disk and a Save As box will appear.
Select a directory to save the file in and click Save.
Locate the file using Windows Explorer when the download has completed.
Double click on the file. This will extract all the driver files into a directory on your hard drive. The directory these files are extracted to will have a similar name to the file that was downloaded (i.e., c:\clj2550ps). However, you can change the path and directory name at the time of extracting the file.
PLEASE USE THESE STEPS IF YOU ARE UPDATING THE HP COLOR LASERJET 2550 DRIVER
From the Windows XP desktop, click Start, and then Printers and Faxes (for Windows 2000, click Start, Settings and then Printers).
Right click on the hp color LaserJet 2550 PostScript icon or listing, and then click Properties.
Click the Advanced tab.
Make certain the Driver box displays hp color LaserJet 2550 PostScript, and then click New Driver.
In the Add Printer Driver Wizard window, click Have Disk, and then Browse.
Browse to the directory that the downloaded files where unzipped to.

NOTE: The default directory would be c:\clj2550pswin2kxp2003-xx (xx represents language, such as en for English)

The Look in box will display clj2550pswin2kxp2003-xx (xx represents language, such as en for English). Do not open any folders in this directory. The autorun.ini file should be in the File name box. Click Open.
On the Install From Disk window, click OK. The print driver name, hp color LaserJet 2550 PostScript, should be displayed. Click Next to continue.
When the update is finished, click OK to close the hp color LaserJet 2550 PostScript Properties window. The update is now complete.
PLEASE USE THESE STEPS IF THIS IS A FIRST TIME INSTALLATION OF THE HP COLOR LASERJET 2550 DRIVER:
Attach a USB or parallel cable to the printer and the computer.
The "Found New Hardware Wizard" should appear. Note: If attaching via a parallel cable it may be necessary to restart the computer for the "Found New Hardware Wizard" to appear.
For Windows XP
Choose "Install from a list or specific location (advanced)" and then click Next.
Select only the box next to "Include this location in the search" (clear all other check boxes) then click the browse button to locate the directory where the driver was extracted to in the steps above. The directory these files are extracted to will have a similar name to the file that was downloaded (i.e., c:\clj2550ps).
Click once on the directory name to highlight it then choose OK. The directory path then appears in the dialog.
Select the Next button. Files will be copied to the appropriate directories automatically.
Click the Finish button within the "New Hardware Wizard"
After several moments and message will appear on the system tray (at the bottom right of the screen near the clock) indicating that "Your new hardware has been installed and is ready to use.

For Windows 2000
Click the Next button to continue.
Choose "Search for a suitable driver form my device (recommended)" and then click Next.
Select only the box next to "Specify a location" (clear all other check boxes) and click Next.
Click the browse button to locate the directory where the driver was extracted to in the steps above. The directory these files are extracted to will have a similar name to the file that was downloaded (i.e., c:\clj2550ps).
Click once on the directory name to highlight it and then select the Open button.
Autorun.inf should appear in the "file name" box. Click the Open button.
Select OK. The wizard will find the driver for the device.
Click the Next button.
Click Finish. Several dialogs will appear and then disappear.
The printer driver is now installed.
Compañía
Hewlett Packard
Dispositivo
Impresoras y Plotters
Modelo
Hewlett Packard HP Color LaserJet 2550Ln
Descripción
PCL6 Driver
Sistema Operativo
Windows 2000-2003-XP
Idioma
Norwegian
Versión Driver
60.34.78.41
Tamaño
5.5Mb
Nombre del archivo
clj2550pcl6win2kxp2003-no.exe
Información
Enhancements

Incorporated JPEG compression to reduce spool file size.
Resolves spoolsv.exe crash when printing some PowerPoint documents.
Control Panel simulator in the Services tab is now functional.

This section will help you in the download of the software to your computer and start you on the install process.
Before proceeding with the software installation, the printer must first be properly set up, and your computer must be ready to print.

DOWNLOAD AND EXTRACT THE SOFTWARE

Close any screen savers, virus protection programs, or other software programs running on your computer.
Click on Download Now and a File Download box will appear.
Select Save This Program to Disk and a Save As box will appear.
Select a directory to save the file in and click Save.
Locate the file using Windows Explorer when the download has completed.
Double click on the file. This will extract all the driver files into a directory on your hard drive. The directory these files are extracted to will have a similar name to the file that was downloaded (i.e., c:\clj2550pcl6). However, you can change the path and directory name at the time of extracting the file.
PLEASE USE THESE STEPS IF YOU ARE UPDATING THE HP COLOR LASERJET 2550 DRIVER
From the Windows XP desktop, click Start, and then Printers and Faxes (for Windows 2000, click Start, Settings and then Printers).
Right click on the hp color LaserJet 2550 PCL6 icon or listing, and then click Properties.
Click the Advanced tab.
Make certain the Driver box displays hp color LaserJet 2550 PCL6, and then click New Driver.
In the Add Printer Driver Wizard window, click Have Disk, and then Browse.
Browse to the directory that the downloaded files where unzipped to.

NOTE: The default directory would be C:\clj2550pcl6 (xx represents language, such as en for English)

The Look in box will display clj2550pcl6win2kxp2003-xx (xx represents language, such as en for English). Do not open any folders in this directory. The autorun.ini file should be in the File name box. Click Open.
On the Install From Disk window, click OK. The print driver name, hp color LaserJet 2550 PCL6, should be displayed. Click Next to continue.
When the update is finished, click OK to close the hp color LaserJet 2550 PCL6 Properties window. The update is now complete.
PLEASE USE THESE STEPS IF THIS IS A FIRST TIME INSTALLATION OF THE HP COLOR LASERJET 2550 DRIVER:
Attach a USB or parallel cable to the printer and the computer.
The "Found New Hardware Wizard" should appear. Note: If attaching via a parallel cable it may be necessary to restart the computer for the "Found New Hardware Wizard" to appear.
For Windows XP
Choose "Install from a list or specific location (advanced)" and then click Next.
Select only the box next to "Include this location in the search" (clear all other check boxes) then click the browse button to locate the directory where the driver was extracted to in the steps above. The directory these files are extracted to will have a similar name to the file that was downloaded (i.e., c:\clj2550pcl6).
Click once on the directory name to highlight it then choose OK. The directory path then appears in the dialog.
Select the Next button. Files will be copied to the appropriate directories automatically.
Click the Finish button within the "New Hardware Wizard"
After several moments and message will appear on the system tray (at the bottom right of the screen near the clock) indicating that "Your new hardware has been installed and is ready to use.

For Windows 2000
Click the Next button to continue.
Choose "Search for a suitable driver form my device (recommended)" and then click Next.
Select only the box next to "Specify a location" (clear all other check boxes) and click Next.
Click the browse button to locate the directory where the driver was extracted to in the steps above. The directory these files are extracted to will have a similar name to the file that was downloaded (i.e., c:\clj2550pcl6).
Click once on the directory name to highlight it and then select the Open button.
Autorun.inf should appear in the "file name" box. Click the Open button.
Select OK. The wizard will find the driver for the device.
Click the Next button.
Click Finish. Several dialogs will appear and then disappear.
The printer driver is now installed.
Compañía
Hewlett Packard
Dispositivo
Impresoras y Plotters
Modelo
Hewlett Packard HP Color LaserJet 2550Ln
Descripción
Universal Print Driver PCL 5
Sistema Operativo
Windows 2000-2003-XP-Vista
Idioma
Norwegian
Versión Driver
4.5
Tamaño
17.8Mb
Nombre del archivo
hpupd45pcl532.exe
Fecha
1 Apr 2008
Información
The UPD version 4.5 is the latest version of HP's Universal Print Driver. Please review the entire documentation for information on issues resolved, performance improvements, and new behavior changes to the UPD.
Compañía
Hewlett Packard
Dispositivo
Impresoras y Plotters
Modelo
Hewlett Packard HP Color LaserJet 2550Ln
Descripción
Universal Print Driver PostScript
Sistema Operativo
Windows 2000-2003-XP-Vista
Idioma
Norwegian
Versión Driver
4.5
Tamaño
18.6Mb
Nombre del archivo
hpupd45ps32.exe
Fecha
1 Apr 2008
Información
The UPD version 4.5 is the latest version of HP's Universal Print Driver. Please review the entire documentation for information on issues resolved, performance improvements, and new behavior changes to the UPD.
Compañía
Hewlett Packard
Dispositivo
Impresoras y Plotters
Modelo
Hewlett Packard HP Color LaserJet 2550Ln
Descripción
PCL6 Driver
Sistema Operativo
Windows 2000-2003-XP-Vista
Idioma
Norwegian
Versión Driver
4.5
Tamaño
18Mb
Nombre del archivo
hpupd45pcl632.exe
Fecha
1 Apr 2008
Información
The UPD version 4.5 is the latest version of HP's Universal Print Driver. Please review the entire documentation for information on issues resolved, performance improvements, and new behavior changes to the UPD.
Compañía
Hewlett Packard
Dispositivo
Impresoras y Plotters
Modelo
Hewlett Packard HP Color LaserJet 2550Ln
Descripción
PCL5 Driver
Sistema Operativo
Windows 2003 64 bits-XP 64 bits-Vista 64 bits
Idioma
Norwegian
Versión Driver
4.5
Tamaño
18.2Mb
Nombre del archivo
hpupd45pcl564.exe
Fecha
1 Apr 2008
Información
The UPD version 4.5 is the latest version of HP's Universal Print Driver. Please review the entire documentation for information on issues resolved, performance improvements, and new behavior changes to the UPD.
Compañía
Hewlett Packard
Dispositivo
Impresoras y Plotters
Modelo
Hewlett Packard HP Color LaserJet 2550Ln
Descripción
Universal Print Driver x64 PostScript
Sistema Operativo
Windows 2003 64 bits-XP 64 bits-Vista 64 bits
Idioma
Norwegian
Versión Driver
4.5
Tamaño
19Mb
Nombre del archivo
hpupd45ps64.exe
Fecha
1 Apr 2008
Información
The UPD version 4.5 is the latest version of HP's Universal Print Driver. Please review the entire documentation for information on issues resolved, performance improvements, and new behavior changes to the UPD.
Compañía
Hewlett Packard
Dispositivo
Impresoras y Plotters
Modelo
Hewlett Packard HP Color LaserJet 2550Ln
Descripción
PCL6 Driver
Sistema Operativo
Windows 2003 64 bits-XP 64 bits-Vista 64 bits
Idioma
Norwegian
Versión Driver
4.5
Tamaño
18.2Mb
Nombre del archivo
hpupd45pcl664.exe
Fecha
1 Apr 2008
Información
The UPD version 4.5 is the latest version of HP's Universal Print Driver. Please review the entire documentation for information on issues resolved, performance improvements, and new behavior changes to the UPD.
Compañía
Hewlett Packard
Dispositivo
Impresoras y Plotters
Modelo
Hewlett Packard HP Color LaserJet 2550Ln
Descripción
PCL6 Plug and Play Bundle
Sistema Operativo
Windows 98-Me-2000-2003-XP
Idioma
Norwegian
Versión Driver
2.0
Tamaño
11.6Mb
Nombre del archivo
clj2550pcl6-no.exe
Información
Use this software for first time USB installations only. Do NOT attach USB cable until prompted by the installation program

If upgrading a previous installation please use the "HP Color LaserJet 2550 PCL6 driver" download and view the description which includes instructions for updating the driver.

HP Color LaserJet 2550 PCL6 Plug and Play Bundle provides the following:

An installation program to assist with installation.
The print drivers are the same as those found on the version 2.0 CD.
Windows 98/ME: 4.24.2550.400
Windows 2000/XP/2003: 60.034.78.41
Plug and Play installable drivers for 1284.4 communication with the device.
Plug and Play installable PCL6 printer driver.
The product CD can be used at a later time to install additional product software, such as Toolbox.
A silent install is provided by running the program from a DOS prompt with the following command line parameters:
lj2550pcl6-en.exe -s -a -silent

This section will help you in the download of the software to your computer and start you on the install process.
Before proceeding with the software installation, the printer must first be properly set up, and your computer must be ready to print.
Close any screen savers, virus protection programs, or other software programs running on your computer.
Click on Download Now and a File Download box will appear.
Select Save This Program to Disk and a Save As box will appear.
Select a directory to save the file in and click Save.
Locate the file using Windows Explorer when the download has completed.
Double click on the file. This will extract all the driver files into a directory on your hard drive. The default directory is Program Files\Hewlett-Packard\Color LaserJet 2550 Drivers. However, you can change the path and directory name at the time of extracting the file.
Follow the instructions presented by the installation program. Do NOT attach the USB cable to the printer until prompted by the installation program.
Compañía
Hewlett Packard
Dispositivo
Impresoras y Plotters
Modelo
Hewlett Packard HP Color LaserJet 2550Ln
Descripción
Firmware Update utility
Sistema Operativo
Windows 98-Me-2000-XP
Idioma
Norwegian
Versión Firmware
20040930
Tamaño
6.2Mb
Nombre del archivo
flash_5f2550_20040930_rev2.exe
Fecha
11 Oct 2004
Información
WARNING: Determine what the current firmware version of your printer is before downloading the update. If your printer already has the current version (20040930), downloading this file might cause possible performance issues. To determine the version of firmware of your HP Color LaserJet 2550 printer, print a Configuration Page by pressing the Go button (green) and the Cancel button (Red) on the printer's control panel. The firmware version is listed on the top left part of the page, under Product Information - Firmware Datecode.
Firmware Enhancements

These changes are implemented in the new version firmware 20040930:
Default screenmatch color treatment for non-driver PostScript jobs.
Enabled to set FONTSOURCE to a downloaded soft font via PJL.
Cyrillic/Greek/Hebrew font settings now available
Improved memory allocation for complex pages.
The default I/O timeout changed to 120 seconds.
Printing from Mac systems, and printing PDF files, will have an improved CMYK color adjustment.
Calibration will now occur on non-HP refilled cartridge that have the e-label set to "toner out".
Unexpected Paper Size messages are now bypassed by pressing Go or Cancel from the Toolbox utility.
The Supplies Status page will now include the part number for HP cartridges when recognizing a non-HP cartridge installed.
Monochrome print speed will increase by choosing "Print to Grayscale" in the driver's Color tab

Note: This utility is in English only.

* The HP Color LaserJet 2550 series Firmware Update Utility can be performed using either a Parallel or USB port.
When using the USB port, the HP Color LaserJet 2550 series software must be installed prior to using this utility.
When using the parallel port, the HP Color LaserJet 2550 series software does not need to be installed. Connect the 2550 series printer to a PC with the Firmware Update Utility loaded using a parallel cable.
* You will need 20MB of disk space to use the Firmware Update Utility.

* The HP Color LaserJet 2550 series printer must be in a READY state and remain powered on during the entire firmware update process.

* Administrator Privileges are required on the PC executing the utility.

* The control panel of the printer will display a series of flashing lights.

* After the Firmware Update Utility has finished, the HP Color LaserJet 2550 series printer will display a solid green Ready light (second from the bottom). Depending on the operating system on your PC, you may be prompted to reboot your computer.

This utility is for use on Windows 95, 98, ME, 2000 and XP. It can ONLY be used with parallel or USB connections.


Installation Instructions

* For users connected via the network, please temporarily disconnect your HP Color LaserJet 2550 series printer from the network to ensure the network devices to not interrupt the firmware upgrade process.

Parallel Cable connection
Connect a PC to the HP Color LaserJet 2550 series printer via a parallel cable.
You do not need to install the HP software for parallel upgrades.
If the "Add Hardware" wizard starts when you plug in the parallel cable, you can safely cancel it.
Double click the Flash Update utility.
Click 'OK' to begin the process. The utility will go through the following steps:
Close all toolbox and HP software running on the host PC.
Upload firmware to printer, at which point the printer lights will start flashing until complete.
Printer will then erase the old firmware and write the new firmware and reboot it.
Utility will prompt user to reboot PC (to synchronize the printer, restart Toolbox and the HP software)
DO NOT POWER CYCLE THE PRINTER during the upgrade process or it will leave your printer in an unusable state.
Once the utility is complete, it will prompt you to reboot your PC and printer to synchronize the printer and the HP Toolbox.
The firmware update can take up to 5 minutes to complete. Please be patient.
USB Connection
In order to use USB to update your printer, you must have the HP Color LaserJet 2550 series printer software installed on your PC.
You do NOT need to have toolbox installed. A driver only installation will work fine.
Ensure your HP Color LaserJet 2550 series printer is connected to the USB cable.
Double click the Flash Update utility.
Click 'OK' to begin the process. The utility will go through the following steps:
Close all Toolbox and HP software running on host PC.
Upload firmware to printer, at which point the printer lights will flash until complete.
Printer will then erase the old firmware and write the new firmware and reboot itself.
Utility will prompt user to reboot PC (to resync printer, restart toolbox and HP software)
DO NOT POWER CYCLE THE PRINTER during the upgrade process or it will leave your printer in an unusable state.
Once the utility is complete, it will prompt you to reboot your PC and printer to resync the printer and the HP Toolbox.
The firmware update can take up to 5 minutes to complete. Please be patient.
Compañía
Hewlett Packard
Dispositivo
Impresoras y Plotters
Modelo
Hewlett Packard HP Color LaserJet 2550Ln
Descripción
PostScript Driver
Sistema Operativo
Windows NT4
Idioma
Norwegian
Versión Driver
034.4100
Tamaño
1Mb
Nombre del archivo
clj2550pswinnt4-no.exe
Información
This section will help you in the download of the software to your computer and start you on the install process.
Before proceeding with the software installation, the printer must first be properly set up, and your computer must be ready to print.
Turn on the printer first, then turn on the computer.
Close any screen savers, virus protection programs, or other software programs running on your computer.
Click on Download Now and a File Download box will appear.
Select Save This Program to Disk and a Save As box will appear.
Select a directory to save the file in and click Save.
Locate the file using Windows Explorer when the download has completed.
Double click on the file. This will extract all the driver files into a directory on your hard drive. The directory these files are extracted to will have a similar name to the file that was downloaded (i.e., c:\clj2550ps). However, you can change the path and directory name at the time of extracting the file.
Open the Printers Window (Click Start-Settings-Printers).
Update the printer if it was previously installed
Right click on the printer and select Properties from the pop menu.
On the General tab, select New Driver.
Click on the Warning Box that pops up.
A printer listing box will appear. Select Have Disk.
Another box Install from Disk appears.
Click the Browse to locate the expanded files directory (i.e., c:\clj2550ps).
Click on the file ending with .inf .
Click Open and then OK and let files install.
Add the printer if it hasn't been installed yet.
Click Add New Printer
Follow the instructions of the Add Printer Wizard.
Compañía
Hewlett Packard
Dispositivo
Impresoras y Plotters
Modelo
Hewlett Packard HP Color LaserJet 2550Ln
Descripción
PCL6 Driver
Sistema Operativo
Windows NT4
Idioma
Norwegian
Versión Driver
4.24.2550.400
Tamaño
2.9Mb
Nombre del archivo
clj2550pcl6winnt4-no.exe
Información
This section will help you in the download of the software to your computer and start you on the install process.
Before proceeding with the software installation, the printer must first be properly set up, and your computer must be ready to print.
Turn on the printer first, then turn on the computer.
Close any screen savers, virus protection programs, or other software programs running on your computer.
Click on Download Now and a File Download box will appear.
Select Save This Program to Disk and a Save As box will appear.
Select a directory to save the file in and click Save.
Locate the file using Windows Explorer when the download has completed.
Double click on the file. This will extract all the driver files into a directory on your hard drive. The directory these files are extracted to will have a similar name to the file that was downloaded (i.e., c:\clj2550pcl6). However, you can change the path and directory name at the time of extracting the file.
Open the Printers Window (Click Start-Settings-Printers).
Update the printer if it was previously installed
Right click on the printer and select Properties from the pop menu.
On the General tab, select New Driver.
Click on the Warning Box that pops up.
A printer listing box will appear. Select Have Disk.
Another box Install from Disk appears.
Click the Browse to locate the expanded files directory (i.e., c:\clj2550pcl6).
Click on the file ending with .inf .
Click Open and then OK and let files install.
Add the printer if it hasn't been installed yet.
Click Add New Printer
Follow the instructions of the Add Printer Wizard.
Compañía
Hewlett Packard
Dispositivo
Impresoras y Plotters
Modelo
Hewlett Packard HP Color LaserJet 2550Ln
Descripción
Removal Tool
Sistema Operativo
Windows NT4-2000-XP
Idioma
Norwegian
Versión Driver
1.0.0.1
Tamaño
316Kb
Nombre del archivo
setconfig_exermtool.exe
Fecha
3 Jun 2005
Información
Download Info
If the following error message is encountered, please install this file for resolution.

This error message may occur with the following Hewlett-Packard LaserJet devices:
LaserJet 1010/1012/1015 Series
LaserJet 1150
LaserJet 1160
LaserJet 1300 Series
LaserJet 1320 Series
LaserJet 3015/3020/3030/3380 Series
Color LaserJet 2550
Note: If the error is encountered, it will be after the initial printer software install and upon consequential system reboots.

This section will help you in the download of the software to your computer and start you on the install process.
Close any screen savers, virus protection programs, or other software programs running on your computer.
Click on Download and a File Download box will appear.
Select Save This Program to Disk and a Save As box will appear.
Select a directory to save the file in and click Save.
Locate the file using Windows Explorer when the download has completed.
Double click on the file. It will execute and install the necessary files.




Compañía
Hewlett Packard
Dispositivo
Impresoras y Plotters
Modelo
Hewlett Packard HP Color LaserJet 2550Ln
Descripción
Firmware Update utility
Sistema Operativo
Mac OS X
Idioma
Polish
Versión Firmware
20040930
Tamaño
5.6Mb
Nombre del archivo
2550_fw_update20040930.dmg
Fecha
28 Jul 2005
Información
WARNING: Determine what the current firmware version of your printer is before downloading the update. If your printer already has the current version (20040930), downloading this file might cause possible performance issues. To determine the version of firmware of your HP Color LaserJet 2550 printer, print a Configuration Page by pressing the Go button (green) and the Cancel button (Red) on the printer's control panel. The firmware version is listed on the top left part of the page, under Product Information - Firmware Datecode.

Firmware Enhancements

These changes are implemented in the new version firmware 20040930:
Default screenmatch color treatment for non-driver PostScript jobs.
Enabled to set FONTSOURCE to a downloaded soft font via PJL.
Cyrillic/Greek/Hebrew font settings now available
Improved memory allocation for complex pages.
The default I/O timeout changed to 120 seconds.
Printing from Mac systems, and printing PDF files, will have an improved CMYK color adjustment.
Calibration will now occur on non-HP refilled cartridge that have the e-label set to "toner out".
Unexpected Paper Size messages are now bypassed by pressing Go or Cancel from the Toolbox utility.
The Supplies Status page will now include the part number for HP cartridges when recognizing a non-HP cartridge installed.
Monochrome print speed will increase by choosing "Print to Grayscale" in the driver's Color tab.

Note: This utility is in English only.

* You will need 20MB of disk space to use the Firmware Update Utility.

* The HP Color LaserJet 2550 series printer must be in a READY state and remain powered on during the entire firmware update process.

* The control panel of the printer will display a series of flashing lights.

* After the Firmware Update Utility has finished, the HP Color LaserJet 2550 series printer will display a solid green Ready light (second from the bottom). You may be prompted to reboot your computer.


Installation Instructions

(NOTE! If you use Internet Explorer to download the utility, it may strip the .dmg extension to the file. Simply re-add the .dmg extension and MAC OS X should recognize the file as a disk image)

This utility is for use on any OS X 10.2 or 10.3 Mac. It will NOT function in the MAC OS 9 environment.

It can only be used with a USB connection to the HP Color LaserJet 2550.

Instructions for upgrade

* For users connected via the network, please temporarily disconnect your HP Color LaserJet 2550 series printer from the network to ensure the network devices to not interrupt the FW upgrade process.
Mount the disk image containing the FW update.
Run the FW Update Application contained in the disk image.
Follow the onscreen prompts to continue.
When prompted, connect the printer via USB.
Upon finding an HP Color LaserJet 2550 series printer, the utility will prompt you to reboot the printer by simply turn the power off and back on. This ensures the printer is in a proper state to receive the update.
Once the printer has been rebooted, the utility will allow you to 'download' the firmware to the HP Color LaserJet 2550 series printer.
DO NOT POWER CYCLE THE PRINTER during the upgrade process or it will leave your printer in an unusable state.
One green LED will start flashing initially followed by 2 LED's flashing.
Once the LEDS stop flashing, the printer has updated and re-initialized, the firmware should be updated.
The firmware update can take up to 5 minutes to complete. Please be patient.
Compañía
Hewlett Packard
Dispositivo
Impresoras y Plotters
Modelo
Hewlett Packard HP Color LaserJet 2550Ln
Descripción
PCL6 Driver
Sistema Operativo
Windows 2000-2003-XP
Idioma
Polish
Versión Driver
60.34.78.41
Tamaño
5.5Mb
Nombre del archivo
clj2550pcl6win2kxp2003-pl.exe
Información
Enhancements

Incorporated JPEG compression to reduce spool file size.
Resolves spoolsv.exe crash when printing some PowerPoint documents.
Control Panel simulator in the Services tab is now functional.

This section will help you in the download of the software to your computer and start you on the install process.
Before proceeding with the software installation, the printer must first be properly set up, and your computer must be ready to print.

DOWNLOAD AND EXTRACT THE SOFTWARE

Close any screen savers, virus protection programs, or other software programs running on your computer.
Click on Download Now and a File Download box will appear.
Select Save This Program to Disk and a Save As box will appear.
Select a directory to save the file in and click Save.
Locate the file using Windows Explorer when the download has completed.
Double click on the file. This will extract all the driver files into a directory on your hard drive. The directory these files are extracted to will have a similar name to the file that was downloaded (i.e., c:\clj2550pcl6). However, you can change the path and directory name at the time of extracting the file.
PLEASE USE THESE STEPS IF YOU ARE UPDATING THE HP COLOR LASERJET 2550 DRIVER
From the Windows XP desktop, click Start, and then Printers and Faxes (for Windows 2000, click Start, Settings and then Printers).
Right click on the hp color LaserJet 2550 PCL6 icon or listing, and then click Properties.
Click the Advanced tab.
Make certain the Driver box displays hp color LaserJet 2550 PCL6, and then click New Driver.
In the Add Printer Driver Wizard window, click Have Disk, and then Browse.
Browse to the directory that the downloaded files where unzipped to.

NOTE: The default directory would be C:\clj2550pcl6 (xx represents language, such as en for English)

The Look in box will display clj2550pcl6win2kxp2003-xx (xx represents language, such as en for English). Do not open any folders in this directory. The autorun.ini file should be in the File name box. Click Open.
On the Install From Disk window, click OK. The print driver name, hp color LaserJet 2550 PCL6, should be displayed. Click Next to continue.
When the update is finished, click OK to close the hp color LaserJet 2550 PCL6 Properties window. The update is now complete.
PLEASE USE THESE STEPS IF THIS IS A FIRST TIME INSTALLATION OF THE HP COLOR LASERJET 2550 DRIVER:
Attach a USB or parallel cable to the printer and the computer.
The "Found New Hardware Wizard" should appear. Note: If attaching via a parallel cable it may be necessary to restart the computer for the "Found New Hardware Wizard" to appear.
For Windows XP
Choose "Install from a list or specific location (advanced)" and then click Next.
Select only the box next to "Include this location in the search" (clear all other check boxes) then click the browse button to locate the directory where the driver was extracted to in the steps above. The directory these files are extracted to will have a similar name to the file that was downloaded (i.e., c:\clj2550pcl6).
Click once on the directory name to highlight it then choose OK. The directory path then appears in the dialog.
Select the Next button. Files will be copied to the appropriate directories automatically.
Click the Finish button within the "New Hardware Wizard"
After several moments and message will appear on the system tray (at the bottom right of the screen near the clock) indicating that "Your new hardware has been installed and is ready to use.

For Windows 2000
Click the Next button to continue.
Choose "Search for a suitable driver form my device (recommended)" and then click Next.
Select only the box next to "Specify a location" (clear all other check boxes) and click Next.
Click the browse button to locate the directory where the driver was extracted to in the steps above. The directory these files are extracted to will have a similar name to the file that was downloaded (i.e., c:\clj2550pcl6).
Click once on the directory name to highlight it and then select the Open button.
Autorun.inf should appear in the "file name" box. Click the Open button.
Select OK. The wizard will find the driver for the device.
Click the Next button.
Click Finish. Several dialogs will appear and then disappear.
The printer driver is now installed.
Compañía
Hewlett Packard
Dispositivo
Impresoras y Plotters
Modelo
Hewlett Packard HP Color LaserJet 2550Ln
Descripción
PostScript Driver
Sistema Operativo
Windows 2000-2003-XP
Idioma
Polish
Versión Driver
60.34.78.41
Tamaño
5.3Mb
Nombre del archivo
clj2550pswin2kxp2003-pi.exe
Información
Enhancements

Incorporated JPEG compression to reduce spool file size.
Resolves spoolsv.exe crash when printing some PowerPoint documents.
Control Panel simulator in the Services tab is now functional.

This section will help you in the download of the software to your computer and start you on the install process.
Before proceeding with the software installation, the printer must first be properly set up, and your computer must be ready to print.

DOWNLOAD AND EXTRACT THE SOFTWARE

Close any screen savers, virus protection programs, or other software programs running on your computer.
Click on Download Now and a File Download box will appear.
Select Save This Program to Disk and a Save As box will appear.
Select a directory to save the file in and click Save.
Locate the file using Windows Explorer when the download has completed.
Double click on the file. This will extract all the driver files into a directory on your hard drive. The directory these files are extracted to will have a similar name to the file that was downloaded (i.e., c:\clj2550ps). However, you can change the path and directory name at the time of extracting the file.
PLEASE USE THESE STEPS IF YOU ARE UPDATING THE HP COLOR LASERJET 2550 DRIVER
From the Windows XP desktop, click Start, and then Printers and Faxes (for Windows 2000, click Start, Settings and then Printers).
Right click on the hp color LaserJet 2550 PostScript icon or listing, and then click Properties.
Click the Advanced tab.
Make certain the Driver box displays hp color LaserJet 2550 PostScript, and then click New Driver.
In the Add Printer Driver Wizard window, click Have Disk, and then Browse.
Browse to the directory that the downloaded files where unzipped to.

NOTE: The default directory would be c:\clj2550pswin2kxp2003-xx (xx represents language, such as en for English)

The Look in box will display clj2550pswin2kxp2003-xx (xx represents language, such as en for English). Do not open any folders in this directory. The autorun.ini file should be in the File name box. Click Open.
On the Install From Disk window, click OK. The print driver name, hp color LaserJet 2550 PostScript, should be displayed. Click Next to continue.
When the update is finished, click OK to close the hp color LaserJet 2550 PostScript Properties window. The update is now complete.
PLEASE USE THESE STEPS IF THIS IS A FIRST TIME INSTALLATION OF THE HP COLOR LASERJET 2550 DRIVER:
Attach a USB or parallel cable to the printer and the computer.
The "Found New Hardware Wizard" should appear. Note: If attaching via a parallel cable it may be necessary to restart the computer for the "Found New Hardware Wizard" to appear.
For Windows XP
Choose "Install from a list or specific location (advanced)" and then click Next.
Select only the box next to "Include this location in the search" (clear all other check boxes) then click the browse button to locate the directory where the driver was extracted to in the steps above. The directory these files are extracted to will have a similar name to the file that was downloaded (i.e., c:\clj2550ps).
Click once on the directory name to highlight it then choose OK. The directory path then appears in the dialog.
Select the Next button. Files will be copied to the appropriate directories automatically.
Click the Finish button within the "New Hardware Wizard"
After several moments and message will appear on the system tray (at the bottom right of the screen near the clock) indicating that "Your new hardware has been installed and is ready to use.

For Windows 2000
Click the Next button to continue.
Choose "Search for a suitable driver form my device (recommended)" and then click Next.
Select only the box next to "Specify a location" (clear all other check boxes) and click Next.
Click the browse button to locate the directory where the driver was extracted to in the steps above. The directory these files are extracted to will have a similar name to the file that was downloaded (i.e., c:\clj2550ps).
Click once on the directory name to highlight it and then select the Open button.
Autorun.inf should appear in the "file name" box. Click the Open button.
Select OK. The wizard will find the driver for the device.
Click the Next button.
Click Finish. Several dialogs will appear and then disappear.
The printer driver is now installed.
Compañía
Hewlett Packard
Dispositivo
Impresoras y Plotters
Modelo
Hewlett Packard HP Color LaserJet 2550Ln
Descripción
PCL6 Driver
Sistema Operativo
Windows 2000-2003-XP-Vista
Idioma
Polish
Versión Driver
4.5
Tamaño
18Mb
Nombre del archivo
hpupd45pcl632.exe
Fecha
1 Apr 2008
Información
The UPD version 4.5 is the latest version of HP's Universal Print Driver. Please review the entire documentation for information on issues resolved, performance improvements, and new behavior changes to the UPD.
Compañía
Hewlett Packard
Dispositivo
Impresoras y Plotters
Modelo
Hewlett Packard HP Color LaserJet 2550Ln
Descripción
Universal Print Driver PCL 5
Sistema Operativo
Windows 2000-2003-XP-Vista
Idioma
Polish
Versión Driver
4.5
Tamaño
17.8Mb
Nombre del archivo
hpupd45pcl532.exe
Fecha
1 Apr 2008
Información
The UPD version 4.5 is the latest version of HP's Universal Print Driver. Please review the entire documentation for information on issues resolved, performance improvements, and new behavior changes to the UPD.
Compañía
Hewlett Packard
Dispositivo
Impresoras y Plotters
Modelo
Hewlett Packard HP Color LaserJet 2550Ln
Descripción
Universal Print Driver PostScript
Sistema Operativo
Windows 2000-2003-XP-Vista
Idioma
Polish
Versión Driver
4.5
Tamaño
18.6Mb
Nombre del archivo
hpupd45ps32.exe
Fecha
1 Apr 2008
Información
The UPD version 4.5 is the latest version of HP's Universal Print Driver. Please review the entire documentation for information on issues resolved, performance improvements, and new behavior changes to the UPD.
Compañía
Hewlett Packard
Dispositivo
Impresoras y Plotters
Modelo
Hewlett Packard HP Color LaserJet 2550Ln
Descripción
PCL5 Driver
Sistema Operativo
Windows 2003 64 bits-XP 64 bits-Vista 64 bits
Idioma
Polish
Versión Driver
4.5
Tamaño
18.2Mb
Nombre del archivo
hpupd45pcl564.exe
Fecha
1 Apr 2008
Información
The UPD version 4.5 is the latest version of HP's Universal Print Driver. Please review the entire documentation for information on issues resolved, performance improvements, and new behavior changes to the UPD.
Compañía
Hewlett Packard
Dispositivo
Impresoras y Plotters
Modelo
Hewlett Packard HP Color LaserJet 2550Ln
Descripción
PCL6 Driver
Sistema Operativo
Windows 2003 64 bits-XP 64 bits-Vista 64 bits
Idioma
Polish
Versión Driver
4.5
Tamaño
18.2Mb
Nombre del archivo
hpupd45pcl664.exe
Fecha
1 Apr 2008
Información
The UPD version 4.5 is the latest version of HP's Universal Print Driver. Please review the entire documentation for information on issues resolved, performance improvements, and new behavior changes to the UPD.
Compañía
Hewlett Packard
Dispositivo
Impresoras y Plotters
Modelo
Hewlett Packard HP Color LaserJet 2550Ln
Descripción
Universal Print Driver x64 PostScript
Sistema Operativo
Windows 2003 64 bits-XP 64 bits-Vista 64 bits
Idioma
Polish
Versión Driver
4.5
Tamaño
19Mb
Nombre del archivo
hpupd45ps64.exe
Fecha
1 Apr 2008
Información
The UPD version 4.5 is the latest version of HP's Universal Print Driver. Please review the entire documentation for information on issues resolved, performance improvements, and new behavior changes to the UPD.
Compañía
Hewlett Packard
Dispositivo
Impresoras y Plotters
Modelo
Hewlett Packard HP Color LaserJet 2550Ln
Descripción
PCL6 Plug and Play Bundle
Sistema Operativo
Windows 98-Me-2000-2003-XP
Idioma
Polish
Versión Driver
2.0
Tamaño
11.7Mb
Nombre del archivo
clj2550pcl6-pi.exe
Información
Use this software for first time USB installations only. Do NOT attach USB cable until prompted by the installation program

If upgrading a previous installation please use the "HP Color LaserJet 2550 PCL6 driver" download and view the description which includes instructions for updating the driver.

HP Color LaserJet 2550 PCL6 Plug and Play Bundle provides the following:

An installation program to assist with installation.
The print drivers are the same as those found on the version 2.0 CD.
Windows 98/ME: 4.24.2550.400
Windows 2000/XP/2003: 60.034.78.41
Plug and Play installable drivers for 1284.4 communication with the device.
Plug and Play installable PCL6 printer driver.
The product CD can be used at a later time to install additional product software, such as Toolbox.
A silent install is provided by running the program from a DOS prompt with the following command line parameters:
lj2550pcl6-en.exe -s -a -silent

This section will help you in the download of the software to your computer and start you on the install process.
Before proceeding with the software installation, the printer must first be properly set up, and your computer must be ready to print.
Close any screen savers, virus protection programs, or other software programs running on your computer.
Click on Download Now and a File Download box will appear.
Select Save This Program to Disk and a Save As box will appear.
Select a directory to save the file in and click Save.
Locate the file using Windows Explorer when the download has completed.
Double click on the file. This will extract all the driver files into a directory on your hard drive. The default directory is Program Files\Hewlett-Packard\Color LaserJet 2550 Drivers. However, you can change the path and directory name at the time of extracting the file.
Follow the instructions presented by the installation program. Do NOT attach the USB cable to the printer until prompted by the installation program.
Compañía
Hewlett Packard
Dispositivo
Impresoras y Plotters
Modelo
Hewlett Packard HP Color LaserJet 2550Ln
Descripción
Firmware Update utility
Sistema Operativo
Windows 98-Me-2000-XP
Idioma
Polish
Versión Firmware
20040930
Tamaño
6.2Mb
Nombre del archivo
flash_5f2550_20040930_rev2.exe
Fecha
11 Oct 2004
Información
WARNING: Determine what the current firmware version of your printer is before downloading the update. If your printer already has the current version (20040930), downloading this file might cause possible performance issues. To determine the version of firmware of your HP Color LaserJet 2550 printer, print a Configuration Page by pressing the Go button (green) and the Cancel button (Red) on the printer's control panel. The firmware version is listed on the top left part of the page, under Product Information - Firmware Datecode.
Firmware Enhancements

These changes are implemented in the new version firmware 20040930:
Default screenmatch color treatment for non-driver PostScript jobs.
Enabled to set FONTSOURCE to a downloaded soft font via PJL.
Cyrillic/Greek/Hebrew font settings now available
Improved memory allocation for complex pages.
The default I/O timeout changed to 120 seconds.
Printing from Mac systems, and printing PDF files, will have an improved CMYK color adjustment.
Calibration will now occur on non-HP refilled cartridge that have the e-label set to "toner out".
Unexpected Paper Size messages are now bypassed by pressing Go or Cancel from the Toolbox utility.
The Supplies Status page will now include the part number for HP cartridges when recognizing a non-HP cartridge installed.
Monochrome print speed will increase by choosing "Print to Grayscale" in the driver's Color tab

Note: This utility is in English only.

* The HP Color LaserJet 2550 series Firmware Update Utility can be performed using either a Parallel or USB port.
When using the USB port, the HP Color LaserJet 2550 series software must be installed prior to using this utility.
When using the parallel port, the HP Color LaserJet 2550 series software does not need to be installed. Connect the 2550 series printer to a PC with the Firmware Update Utility loaded using a parallel cable.
* You will need 20MB of disk space to use the Firmware Update Utility.

* The HP Color LaserJet 2550 series printer must be in a READY state and remain powered on during the entire firmware update process.

* Administrator Privileges are required on the PC executing the utility.

* The control panel of the printer will display a series of flashing lights.

* After the Firmware Update Utility has finished, the HP Color LaserJet 2550 series printer will display a solid green Ready light (second from the bottom). Depending on the operating system on your PC, you may be prompted to reboot your computer.

This utility is for use on Windows 95, 98, ME, 2000 and XP. It can ONLY be used with parallel or USB connections.


Installation Instructions

* For users connected via the network, please temporarily disconnect your HP Color LaserJet 2550 series printer from the network to ensure the network devices to not interrupt the firmware upgrade process.

Parallel Cable connection
Connect a PC to the HP Color LaserJet 2550 series printer via a parallel cable.
You do not need to install the HP software for parallel upgrades.
If the "Add Hardware" wizard starts when you plug in the parallel cable, you can safely cancel it.
Double click the Flash Update utility.
Click 'OK' to begin the process. The utility will go through the following steps:
Close all toolbox and HP software running on the host PC.
Upload firmware to printer, at which point the printer lights will start flashing until complete.
Printer will then erase the old firmware and write the new firmware and reboot it.
Utility will prompt user to reboot PC (to synchronize the printer, restart Toolbox and the HP software)
DO NOT POWER CYCLE THE PRINTER during the upgrade process or it will leave your printer in an unusable state.
Once the utility is complete, it will prompt you to reboot your PC and printer to synchronize the printer and the HP Toolbox.
The firmware update can take up to 5 minutes to complete. Please be patient.
USB Connection
In order to use USB to update your printer, you must have the HP Color LaserJet 2550 series printer software installed on your PC.
You do NOT need to have toolbox installed. A driver only installation will work fine.
Ensure your HP Color LaserJet 2550 series printer is connected to the USB cable.
Double click the Flash Update utility.
Click 'OK' to begin the process. The utility will go through the following steps:
Close all Toolbox and HP software running on host PC.
Upload firmware to printer, at which point the printer lights will flash until complete.
Printer will then erase the old firmware and write the new firmware and reboot itself.
Utility will prompt user to reboot PC (to resync printer, restart toolbox and HP software)
DO NOT POWER CYCLE THE PRINTER during the upgrade process or it will leave your printer in an unusable state.
Once the utility is complete, it will prompt you to reboot your PC and printer to resync the printer and the HP Toolbox.
The firmware update can take up to 5 minutes to complete. Please be patient.
Compañía
Hewlett Packard
Dispositivo
Impresoras y Plotters
Modelo
Hewlett Packard HP Color LaserJet 2550Ln
Descripción
PCL6 Driver
Sistema Operativo
Windows NT4
Idioma
Polish
Versión Driver
4.24.2550.400
Tamaño
2.9Mb
Nombre del archivo
clj2550pcl6winnt4-pi.exe
Información
This section will help you in the download of the software to your computer and start you on the install process.
Before proceeding with the software installation, the printer must first be properly set up, and your computer must be ready to print.
Turn on the printer first, then turn on the computer.
Close any screen savers, virus protection programs, or other software programs running on your computer.
Click on Download Now and a File Download box will appear.
Select Save This Program to Disk and a Save As box will appear.
Select a directory to save the file in and click Save.
Locate the file using Windows Explorer when the download has completed.
Double click on the file. This will extract all the driver files into a directory on your hard drive. The directory these files are extracted to will have a similar name to the file that was downloaded (i.e., c:\clj2550pcl6). However, you can change the path and directory name at the time of extracting the file.
Open the Printers Window (Click Start-Settings-Printers).
Update the printer if it was previously installed
Right click on the printer and select Properties from the pop menu.
On the General tab, select New Driver.
Click on the Warning Box that pops up.
A printer listing box will appear. Select Have Disk.
Another box Install from Disk appears.
Click the Browse to locate the expanded files directory (i.e., c:\clj2550pcl6).
Click on the file ending with .inf .
Click Open and then OK and let files install.
Add the printer if it hasn't been installed yet.
Click Add New Printer
Follow the instructions of the Add Printer Wizard.
Compañía
Hewlett Packard
Dispositivo
Impresoras y Plotters
Modelo
Hewlett Packard HP Color LaserJet 2550Ln
Descripción
PostScript Driver
Sistema Operativo
Windows NT4
Idioma
Polish
Versión Driver
034.4100
Tamaño
1Mb
Nombre del archivo
clj2550pswinnt4-pi.exe
Información
This section will help you in the download of the software to your computer and start you on the install process.
Before proceeding with the software installation, the printer must first be properly set up, and your computer must be ready to print.
Turn on the printer first, then turn on the computer.
Close any screen savers, virus protection programs, or other software programs running on your computer.
Click on Download Now and a File Download box will appear.
Select Save This Program to Disk and a Save As box will appear.
Select a directory to save the file in and click Save.
Locate the file using Windows Explorer when the download has completed.
Double click on the file. This will extract all the driver files into a directory on your hard drive. The directory these files are extracted to will have a similar name to the file that was downloaded (i.e., c:\clj2550ps). However, you can change the path and directory name at the time of extracting the file.
Open the Printers Window (Click Start-Settings-Printers).
Update the printer if it was previously installed
Right click on the printer and select Properties from the pop menu.
On the General tab, select New Driver.
Click on the Warning Box that pops up.
A printer listing box will appear. Select Have Disk.
Another box Install from Disk appears.
Click the Browse to locate the expanded files directory (i.e., c:\clj2550ps).
Click on the file ending with .inf .
Click Open and then OK and let files install.
Add the printer if it hasn't been installed yet.
Click Add New Printer
Follow the instructions of the Add Printer Wizard.
Compañía
Hewlett Packard
Dispositivo
Impresoras y Plotters
Modelo
Hewlett Packard HP Color LaserJet 2550Ln
Descripción
Removal Tool
Sistema Operativo
Windows NT4-2000-XP
Idioma
Polish
Versión Driver
1.0.0.1
Tamaño
316Kb
Nombre del archivo
setconfig_exermtool.exe
Fecha
3 Jun 2005
Información
Download Info
If the following error message is encountered, please install this file for resolution.

This error message may occur with the following Hewlett-Packard LaserJet devices:
LaserJet 1010/1012/1015 Series
LaserJet 1150
LaserJet 1160
LaserJet 1300 Series
LaserJet 1320 Series
LaserJet 3015/3020/3030/3380 Series
Color LaserJet 2550
Note: If the error is encountered, it will be after the initial printer software install and upon consequential system reboots.

This section will help you in the download of the software to your computer and start you on the install process.
Close any screen savers, virus protection programs, or other software programs running on your computer.
Click on Download and a File Download box will appear.
Select Save This Program to Disk and a Save As box will appear.
Select a directory to save the file in and click Save.
Locate the file using Windows Explorer when the download has completed.
Double click on the file. It will execute and install the necessary files.




Compañía
Hewlett Packard
Dispositivo
Impresoras y Plotters
Modelo
Hewlett Packard HP Color LaserJet 2550Ln
Descripción
Installer
Sistema Operativo
Mac OS 9
Idioma
Portuguese
Versión Driver
4.1
Tamaño
4Mb
Nombre del archivo
clj2550installer-pr.sit
Información
HP Color LaserJet 2550 Installer for Mac OS 9.

Compañía
Hewlett Packard
Dispositivo
Impresoras y Plotters
Modelo
Hewlett Packard HP Color LaserJet 2550Ln
Descripción
Printing software and utility
Sistema Operativo
Mac OS 9
Idioma
Portuguese
Versión Utilities
4.1
Tamaño
4Mb
Nombre del archivo
clj2550mac9_x-pr.sit
Información
The HP LaserJet Installer provides HP LaserJet PostScript printing support for the Mac 9.1 and 9.2 operating systems.
Compañía
Hewlett Packard
Dispositivo
Impresoras y Plotters
Modelo
Hewlett Packard HP Color LaserJet 2550Ln
Descripción
Firmware Update utility
Sistema Operativo
Mac OS X
Idioma
Portuguese
Versión Firmware
20040930
Tamaño
5.6Mb
Nombre del archivo
2550_fw_update20040930.dmg
Fecha
28 Jul 2005
Información
WARNING: Determine what the current firmware version of your printer is before downloading the update. If your printer already has the current version (20040930), downloading this file might cause possible performance issues. To determine the version of firmware of your HP Color LaserJet 2550 printer, print a Configuration Page by pressing the Go button (green) and the Cancel button (Red) on the printer's control panel. The firmware version is listed on the top left part of the page, under Product Information - Firmware Datecode.

Firmware Enhancements

These changes are implemented in the new version firmware 20040930:
Default screenmatch color treatment for non-driver PostScript jobs.
Enabled to set FONTSOURCE to a downloaded soft font via PJL.
Cyrillic/Greek/Hebrew font settings now available
Improved memory allocation for complex pages.
The default I/O timeout changed to 120 seconds.
Printing from Mac systems, and printing PDF files, will have an improved CMYK color adjustment.
Calibration will now occur on non-HP refilled cartridge that have the e-label set to "toner out".
Unexpected Paper Size messages are now bypassed by pressing Go or Cancel from the Toolbox utility.
The Supplies Status page will now include the part number for HP cartridges when recognizing a non-HP cartridge installed.
Monochrome print speed will increase by choosing "Print to Grayscale" in the driver's Color tab.

Note: This utility is in English only.

* You will need 20MB of disk space to use the Firmware Update Utility.

* The HP Color LaserJet 2550 series printer must be in a READY state and remain powered on during the entire firmware update process.

* The control panel of the printer will display a series of flashing lights.

* After the Firmware Update Utility has finished, the HP Color LaserJet 2550 series printer will display a solid green Ready light (second from the bottom). You may be prompted to reboot your computer.


Installation Instructions

(NOTE! If you use Internet Explorer to download the utility, it may strip the .dmg extension to the file. Simply re-add the .dmg extension and MAC OS X should recognize the file as a disk image)

This utility is for use on any OS X 10.2 or 10.3 Mac. It will NOT function in the MAC OS 9 environment.

It can only be used with a USB connection to the HP Color LaserJet 2550.

Instructions for upgrade

* For users connected via the network, please temporarily disconnect your HP Color LaserJet 2550 series printer from the network to ensure the network devices to not interrupt the FW upgrade process.
Mount the disk image containing the FW update.
Run the FW Update Application contained in the disk image.
Follow the onscreen prompts to continue.
When prompted, connect the printer via USB.
Upon finding an HP Color LaserJet 2550 series printer, the utility will prompt you to reboot the printer by simply turn the power off and back on. This ensures the printer is in a proper state to receive the update.
Once the printer has been rebooted, the utility will allow you to 'download' the firmware to the HP Color LaserJet 2550 series printer.
DO NOT POWER CYCLE THE PRINTER during the upgrade process or it will leave your printer in an unusable state.
One green LED will start flashing initially followed by 2 LED's flashing.
Once the LEDS stop flashing, the printer has updated and re-initialized, the firmware should be updated.
The firmware update can take up to 5 minutes to complete. Please be patient.
Compañía
Hewlett Packard
Dispositivo
Impresoras y Plotters
Modelo
Hewlett Packard HP Color LaserJet 2550Ln
Descripción
PostScript Driver
Sistema Operativo
Windows 2000-2003-XP
Idioma
Portuguese
Versión Driver
60.34.78.41
Tamaño
5.3Mb
Nombre del archivo
clj2550pswin2kxp2003-pr.exe
Información
Enhancements

Incorporated JPEG compression to reduce spool file size.
Resolves spoolsv.exe crash when printing some PowerPoint documents.
Control Panel simulator in the Services tab is now functional.

This section will help you in the download of the software to your computer and start you on the install process.
Before proceeding with the software installation, the printer must first be properly set up, and your computer must be ready to print.

DOWNLOAD AND EXTRACT THE SOFTWARE

Close any screen savers, virus protection programs, or other software programs running on your computer.
Click on Download Now and a File Download box will appear.
Select Save This Program to Disk and a Save As box will appear.
Select a directory to save the file in and click Save.
Locate the file using Windows Explorer when the download has completed.
Double click on the file. This will extract all the driver files into a directory on your hard drive. The directory these files are extracted to will have a similar name to the file that was downloaded (i.e., c:\clj2550ps). However, you can change the path and directory name at the time of extracting the file.
PLEASE USE THESE STEPS IF YOU ARE UPDATING THE HP COLOR LASERJET 2550 DRIVER
From the Windows XP desktop, click Start, and then Printers and Faxes (for Windows 2000, click Start, Settings and then Printers).
Right click on the hp color LaserJet 2550 PostScript icon or listing, and then click Properties.
Click the Advanced tab.
Make certain the Driver box displays hp color LaserJet 2550 PostScript, and then click New Driver.
In the Add Printer Driver Wizard window, click Have Disk, and then Browse.
Browse to the directory that the downloaded files where unzipped to.

NOTE: The default directory would be c:\clj2550pswin2kxp2003-xx (xx represents language, such as en for English)

The Look in box will display clj2550pswin2kxp2003-xx (xx represents language, such as en for English). Do not open any folders in this directory. The autorun.ini file should be in the File name box. Click Open.
On the Install From Disk window, click OK. The print driver name, hp color LaserJet 2550 PostScript, should be displayed. Click Next to continue.
When the update is finished, click OK to close the hp color LaserJet 2550 PostScript Properties window. The update is now complete.
PLEASE USE THESE STEPS IF THIS IS A FIRST TIME INSTALLATION OF THE HP COLOR LASERJET 2550 DRIVER:
Attach a USB or parallel cable to the printer and the computer.
The "Found New Hardware Wizard" should appear. Note: If attaching via a parallel cable it may be necessary to restart the computer for the "Found New Hardware Wizard" to appear.
For Windows XP
Choose "Install from a list or specific location (advanced)" and then click Next.
Select only the box next to "Include this location in the search" (clear all other check boxes) then click the browse button to locate the directory where the driver was extracted to in the steps above. The directory these files are extracted to will have a similar name to the file that was downloaded (i.e., c:\clj2550ps).
Click once on the directory name to highlight it then choose OK. The directory path then appears in the dialog.
Select the Next button. Files will be copied to the appropriate directories automatically.
Click the Finish button within the "New Hardware Wizard"
After several moments and message will appear on the system tray (at the bottom right of the screen near the clock) indicating that "Your new hardware has been installed and is ready to use.

For Windows 2000
Click the Next button to continue.
Choose "Search for a suitable driver form my device (recommended)" and then click Next.
Select only the box next to "Specify a location" (clear all other check boxes) and click Next.
Click the browse button to locate the directory where the driver was extracted to in the steps above. The directory these files are extracted to will have a similar name to the file that was downloaded (i.e., c:\clj2550ps).
Click once on the directory name to highlight it and then select the Open button.
Autorun.inf should appear in the "file name" box. Click the Open button.
Select OK. The wizard will find the driver for the device.
Click the Next button.
Click Finish. Several dialogs will appear and then disappear.
The printer driver is now installed.
Compañía
Hewlett Packard
Dispositivo
Impresoras y Plotters
Modelo
Hewlett Packard HP Color LaserJet 2550Ln
Descripción
PCL6 Driver
Sistema Operativo
Windows 2000-2003-XP
Idioma
Portuguese
Versión Driver
60.34.78.41
Tamaño
5.5Mb
Nombre del archivo
clj2550pcl6win2kxp2003-pt.exe
Información
Enhancements

Incorporated JPEG compression to reduce spool file size.
Resolves spoolsv.exe crash when printing some PowerPoint documents.
Control Panel simulator in the Services tab is now functional.

This section will help you in the download of the software to your computer and start you on the install process.
Before proceeding with the software installation, the printer must first be properly set up, and your computer must be ready to print.

DOWNLOAD AND EXTRACT THE SOFTWARE

Close any screen savers, virus protection programs, or other software programs running on your computer.
Click on Download Now and a File Download box will appear.
Select Save This Program to Disk and a Save As box will appear.
Select a directory to save the file in and click Save.
Locate the file using Windows Explorer when the download has completed.
Double click on the file. This will extract all the driver files into a directory on your hard drive. The directory these files are extracted to will have a similar name to the file that was downloaded (i.e., c:\clj2550pcl6). However, you can change the path and directory name at the time of extracting the file.
PLEASE USE THESE STEPS IF YOU ARE UPDATING THE HP COLOR LASERJET 2550 DRIVER
From the Windows XP desktop, click Start, and then Printers and Faxes (for Windows 2000, click Start, Settings and then Printers).
Right click on the hp color LaserJet 2550 PCL6 icon or listing, and then click Properties.
Click the Advanced tab.
Make certain the Driver box displays hp color LaserJet 2550 PCL6, and then click New Driver.
In the Add Printer Driver Wizard window, click Have Disk, and then Browse.
Browse to the directory that the downloaded files where unzipped to.

NOTE: The default directory would be C:\clj2550pcl6 (xx represents language, such as en for English)

The Look in box will display clj2550pcl6win2kxp2003-xx (xx represents language, such as en for English). Do not open any folders in this directory. The autorun.ini file should be in the File name box. Click Open.
On the Install From Disk window, click OK. The print driver name, hp color LaserJet 2550 PCL6, should be displayed. Click Next to continue.
When the update is finished, click OK to close the hp color LaserJet 2550 PCL6 Properties window. The update is now complete.
PLEASE USE THESE STEPS IF THIS IS A FIRST TIME INSTALLATION OF THE HP COLOR LASERJET 2550 DRIVER:
Attach a USB or parallel cable to the printer and the computer.
The "Found New Hardware Wizard" should appear. Note: If attaching via a parallel cable it may be necessary to restart the computer for the "Found New Hardware Wizard" to appear.
For Windows XP
Choose "Install from a list or specific location (advanced)" and then click Next.
Select only the box next to "Include this location in the search" (clear all other check boxes) then click the browse button to locate the directory where the driver was extracted to in the steps above. The directory these files are extracted to will have a similar name to the file that was downloaded (i.e., c:\clj2550pcl6).
Click once on the directory name to highlight it then choose OK. The directory path then appears in the dialog.
Select the Next button. Files will be copied to the appropriate directories automatically.
Click the Finish button within the "New Hardware Wizard"
After several moments and message will appear on the system tray (at the bottom right of the screen near the clock) indicating that "Your new hardware has been installed and is ready to use.

For Windows 2000
Click the Next button to continue.
Choose "Search for a suitable driver form my device (recommended)" and then click Next.
Select only the box next to "Specify a location" (clear all other check boxes) and click Next.
Click the browse button to locate the directory where the driver was extracted to in the steps above. The directory these files are extracted to will have a similar name to the file that was downloaded (i.e., c:\clj2550pcl6).
Click once on the directory name to highlight it and then select the Open button.
Autorun.inf should appear in the "file name" box. Click the Open button.
Select OK. The wizard will find the driver for the device.
Click the Next button.
Click Finish. Several dialogs will appear and then disappear.
The printer driver is now installed.
Compañía
Hewlett Packard
Dispositivo
Impresoras y Plotters
Modelo
Hewlett Packard HP Color LaserJet 2550Ln
Descripción
Universal Print Driver PCL 5
Sistema Operativo
Windows 2000-2003-XP-Vista
Idioma
Portuguese
Versión Driver
4.5
Tamaño
17.8Mb
Nombre del archivo
hpupd45pcl532.exe
Fecha
1 Apr 2008
Información
The UPD version 4.5 is the latest version of HP's Universal Print Driver. Please review the entire documentation for information on issues resolved, performance improvements, and new behavior changes to the UPD.
Compañía
Hewlett Packard
Dispositivo
Impresoras y Plotters
Modelo
Hewlett Packard HP Color LaserJet 2550Ln
Descripción
Universal Print Driver PostScript
Sistema Operativo
Windows 2000-2003-XP-Vista
Idioma
Portuguese
Versión Driver
4.5
Tamaño
18.6Mb
Nombre del archivo
hpupd45ps32.exe
Fecha
1 Apr 2008
Información
The UPD version 4.5 is the latest version of HP's Universal Print Driver. Please review the entire documentation for information on issues resolved, performance improvements, and new behavior changes to the UPD.
Compañía
Hewlett Packard
Dispositivo
Impresoras y Plotters
Modelo
Hewlett Packard HP Color LaserJet 2550Ln
Descripción
PCL6 Driver
Sistema Operativo
Windows 2000-2003-XP-Vista
Idioma
Portuguese
Versión Driver
4.5
Tamaño
18Mb
Nombre del archivo
hpupd45pcl632.exe
Fecha
1 Apr 2008
Información
The UPD version 4.5 is the latest version of HP's Universal Print Driver. Please review the entire documentation for information on issues resolved, performance improvements, and new behavior changes to the UPD.
Compañía
Hewlett Packard
Dispositivo
Impresoras y Plotters
Modelo
Hewlett Packard HP Color LaserJet 2550Ln
Descripción
PCL6 Driver
Sistema Operativo
Windows 2003 64 bits-XP 64 bits-Vista 64 bits
Idioma
Portuguese
Versión Driver
4.5
Tamaño
18.2Mb
Nombre del archivo
hpupd45pcl664.exe
Fecha
1 Apr 2008
Información
The UPD version 4.5 is the latest version of HP's Universal Print Driver. Please review the entire documentation for information on issues resolved, performance improvements, and new behavior changes to the UPD.
Compañía
Hewlett Packard
Dispositivo
Impresoras y Plotters
Modelo
Hewlett Packard HP Color LaserJet 2550Ln
Descripción
Universal Print Driver x64 PostScript
Sistema Operativo
Windows 2003 64 bits-XP 64 bits-Vista 64 bits
Idioma
Portuguese
Versión Driver
4.5
Tamaño
19Mb
Nombre del archivo
hpupd45ps64.exe
Fecha
1 Apr 2008
Información
The UPD version 4.5 is the latest version of HP's Universal Print Driver. Please review the entire documentation for information on issues resolved, performance improvements, and new behavior changes to the UPD.
Compañía
Hewlett Packard
Dispositivo
Impresoras y Plotters
Modelo
Hewlett Packard HP Color LaserJet 2550Ln
Descripción
PCL5 Driver
Sistema Operativo
Windows 2003 64 bits-XP 64 bits-Vista 64 bits
Idioma
Portuguese
Versión Driver
4.5
Tamaño
18.2Mb
Nombre del archivo
hpupd45pcl564.exe
Fecha
1 Apr 2008
Información
The UPD version 4.5 is the latest version of HP's Universal Print Driver. Please review the entire documentation for information on issues resolved, performance improvements, and new behavior changes to the UPD.
Compañía
Hewlett Packard
Dispositivo
Impresoras y Plotters
Modelo
Hewlett Packard HP Color LaserJet 2550Ln
Descripción
PCL6 Plug and Play Bundle
Sistema Operativo
Windows 98-Me-2000-2003-XP
Idioma
Portuguese
Versión Driver
2.0
Tamaño
11.6Mb
Nombre del archivo
clj2550pcl6-pr.exe
Información
Use this software for first time USB installations only. Do NOT attach USB cable until prompted by the installation program

If upgrading a previous installation please use the "HP Color LaserJet 2550 PCL6 driver" download and view the description which includes instructions for updating the driver.

HP Color LaserJet 2550 PCL6 Plug and Play Bundle provides the following:

An installation program to assist with installation.
The print drivers are the same as those found on the version 2.0 CD.
Windows 98/ME: 4.24.2550.400
Windows 2000/XP/2003: 60.034.78.41
Plug and Play installable drivers for 1284.4 communication with the device.
Plug and Play installable PCL6 printer driver.
The product CD can be used at a later time to install additional product software, such as Toolbox.
A silent install is provided by running the program from a DOS prompt with the following command line parameters:
lj2550pcl6-en.exe -s -a -silent

This section will help you in the download of the software to your computer and start you on the install process.
Before proceeding with the software installation, the printer must first be properly set up, and your computer must be ready to print.
Close any screen savers, virus protection programs, or other software programs running on your computer.
Click on Download Now and a File Download box will appear.
Select Save This Program to Disk and a Save As box will appear.
Select a directory to save the file in and click Save.
Locate the file using Windows Explorer when the download has completed.
Double click on the file. This will extract all the driver files into a directory on your hard drive. The default directory is Program Files\Hewlett-Packard\Color LaserJet 2550 Drivers. However, you can change the path and directory name at the time of extracting the file.
Follow the instructions presented by the installation program. Do NOT attach the USB cable to the printer until prompted by the installation program.
Compañía
Hewlett Packard
Dispositivo
Impresoras y Plotters
Modelo
Hewlett Packard HP Color LaserJet 2550Ln
Descripción
Firmware Update utility
Sistema Operativo
Windows 98-Me-2000-XP
Idioma
Portuguese
Versión Firmware
20040930
Tamaño
6.2Mb
Nombre del archivo
flash_5f2550_20040930_rev2.exe
Fecha
11 Oct 2004
Información
WARNING: Determine what the current firmware version of your printer is before downloading the update. If your printer already has the current version (20040930), downloading this file might cause possible performance issues. To determine the version of firmware of your HP Color LaserJet 2550 printer, print a Configuration Page by pressing the Go button (green) and the Cancel button (Red) on the printer's control panel. The firmware version is listed on the top left part of the page, under Product Information - Firmware Datecode.
Firmware Enhancements

These changes are implemented in the new version firmware 20040930:
Default screenmatch color treatment for non-driver PostScript jobs.
Enabled to set FONTSOURCE to a downloaded soft font via PJL.
Cyrillic/Greek/Hebrew font settings now available
Improved memory allocation for complex pages.
The default I/O timeout changed to 120 seconds.
Printing from Mac systems, and printing PDF files, will have an improved CMYK color adjustment.
Calibration will now occur on non-HP refilled cartridge that have the e-label set to "toner out".
Unexpected Paper Size messages are now bypassed by pressing Go or Cancel from the Toolbox utility.
The Supplies Status page will now include the part number for HP cartridges when recognizing a non-HP cartridge installed.
Monochrome print speed will increase by choosing "Print to Grayscale" in the driver's Color tab

Note: This utility is in English only.

* The HP Color LaserJet 2550 series Firmware Update Utility can be performed using either a Parallel or USB port.
When using the USB port, the HP Color LaserJet 2550 series software must be installed prior to using this utility.
When using the parallel port, the HP Color LaserJet 2550 series software does not need to be installed. Connect the 2550 series printer to a PC with the Firmware Update Utility loaded using a parallel cable.
* You will need 20MB of disk space to use the Firmware Update Utility.

* The HP Color LaserJet 2550 series printer must be in a READY state and remain powered on during the entire firmware update process.

* Administrator Privileges are required on the PC executing the utility.

* The control panel of the printer will display a series of flashing lights.

* After the Firmware Update Utility has finished, the HP Color LaserJet 2550 series printer will display a solid green Ready light (second from the bottom). Depending on the operating system on your PC, you may be prompted to reboot your computer.

This utility is for use on Windows 95, 98, ME, 2000 and XP. It can ONLY be used with parallel or USB connections.


Installation Instructions

* For users connected via the network, please temporarily disconnect your HP Color LaserJet 2550 series printer from the network to ensure the network devices to not interrupt the firmware upgrade process.

Parallel Cable connection
Connect a PC to the HP Color LaserJet 2550 series printer via a parallel cable.
You do not need to install the HP software for parallel upgrades.
If the "Add Hardware" wizard starts when you plug in the parallel cable, you can safely cancel it.
Double click the Flash Update utility.
Click 'OK' to begin the process. The utility will go through the following steps:
Close all toolbox and HP software running on the host PC.
Upload firmware to printer, at which point the printer lights will start flashing until complete.
Printer will then erase the old firmware and write the new firmware and reboot it.
Utility will prompt user to reboot PC (to synchronize the printer, restart Toolbox and the HP software)
DO NOT POWER CYCLE THE PRINTER during the upgrade process or it will leave your printer in an unusable state.
Once the utility is complete, it will prompt you to reboot your PC and printer to synchronize the printer and the HP Toolbox.
The firmware update can take up to 5 minutes to complete. Please be patient.
USB Connection
In order to use USB to update your printer, you must have the HP Color LaserJet 2550 series printer software installed on your PC.
You do NOT need to have toolbox installed. A driver only installation will work fine.
Ensure your HP Color LaserJet 2550 series printer is connected to the USB cable.
Double click the Flash Update utility.
Click 'OK' to begin the process. The utility will go through the following steps:
Close all Toolbox and HP software running on host PC.
Upload firmware to printer, at which point the printer lights will flash until complete.
Printer will then erase the old firmware and write the new firmware and reboot itself.
Utility will prompt user to reboot PC (to resync printer, restart toolbox and HP software)
DO NOT POWER CYCLE THE PRINTER during the upgrade process or it will leave your printer in an unusable state.
Once the utility is complete, it will prompt you to reboot your PC and printer to resync the printer and the HP Toolbox.
The firmware update can take up to 5 minutes to complete. Please be patient.
Compañía
Hewlett Packard
Dispositivo
Impresoras y Plotters
Modelo
Hewlett Packard HP Color LaserJet 2550Ln
Descripción
PCL6 Driver
Sistema Operativo
Windows NT4
Idioma
Portuguese
Versión Driver
4.24.2550.400
Tamaño
2.9Mb
Nombre del archivo
clj2550pcl6winnt4-pr.exe
Información
This section will help you in the download of the software to your computer and start you on the install process.
Before proceeding with the software installation, the printer must first be properly set up, and your computer must be ready to print.
Turn on the printer first, then turn on the computer.
Close any screen savers, virus protection programs, or other software programs running on your computer.
Click on Download Now and a File Download box will appear.
Select Save This Program to Disk and a Save As box will appear.
Select a directory to save the file in and click Save.
Locate the file using Windows Explorer when the download has completed.
Double click on the file. This will extract all the driver files into a directory on your hard drive. The directory these files are extracted to will have a similar name to the file that was downloaded (i.e., c:\clj2550pcl6). However, you can change the path and directory name at the time of extracting the file.
Open the Printers Window (Click Start-Settings-Printers).
Update the printer if it was previously installed
Right click on the printer and select Properties from the pop menu.
On the General tab, select New Driver.
Click on the Warning Box that pops up.
A printer listing box will appear. Select Have Disk.
Another box Install from Disk appears.
Click the Browse to locate the expanded files directory (i.e., c:\clj2550pcl6).
Click on the file ending with .inf .
Click Open and then OK and let files install.
Add the printer if it hasn't been installed yet.
Click Add New Printer
Follow the instructions of the Add Printer Wizard.
Compañía
Hewlett Packard
Dispositivo
Impresoras y Plotters
Modelo
Hewlett Packard HP Color LaserJet 2550Ln
Descripción
PostScript Driver
Sistema Operativo
Windows NT4
Idioma
Portuguese
Versión Driver
034.4100
Tamaño
1Mb
Nombre del archivo
clj2550pswinnt4-pr.exe
Información
This section will help you in the download of the software to your computer and start you on the install process.
Before proceeding with the software installation, the printer must first be properly set up, and your computer must be ready to print.
Turn on the printer first, then turn on the computer.
Close any screen savers, virus protection programs, or other software programs running on your computer.
Click on Download Now and a File Download box will appear.
Select Save This Program to Disk and a Save As box will appear.
Select a directory to save the file in and click Save.
Locate the file using Windows Explorer when the download has completed.
Double click on the file. This will extract all the driver files into a directory on your hard drive. The directory these files are extracted to will have a similar name to the file that was downloaded (i.e., c:\clj2550ps). However, you can change the path and directory name at the time of extracting the file.
Open the Printers Window (Click Start-Settings-Printers).
Update the printer if it was previously installed
Right click on the printer and select Properties from the pop menu.
On the General tab, select New Driver.
Click on the Warning Box that pops up.
A printer listing box will appear. Select Have Disk.
Another box Install from Disk appears.
Click the Browse to locate the expanded files directory (i.e., c:\clj2550ps).
Click on the file ending with .inf .
Click Open and then OK and let files install.
Add the printer if it hasn't been installed yet.
Click Add New Printer
Follow the instructions of the Add Printer Wizard.
Compañía
Hewlett Packard
Dispositivo
Impresoras y Plotters
Modelo
Hewlett Packard HP Color LaserJet 2550Ln
Descripción
Mobile Printing for Notebooks
Sistema Operativo
Windows NT4
Idioma
Portuguese
Versión Driver
2.10
Tamaño
3.5Mb
Nombre del archivo
mobileprinting4notebooksnt4-pr.exe
Información
HP Mobile Printing for Notebooks (formally known as HP Mobile Printing Driver) is a software solution designed to facilitate printing from mobile notebook computers to network-connected Postscript-enabled HP printers.

As the notebook user moves around within the enterprise from floor to floor or from site to site, there is a need to print to networked printers that are encountered while away from the desk. HP Mobile Printing for Notebooks allows easy printing access to these newly encountered printers. There is no need to locate the printer driver or create a new network port. The user simply selects the HP Mobile Printing application, enters the network address (IP Address, hostname, or UNC pathname) of the target printer when prompted, and the print job is sent to the printer.

A Web JetAdmin plug-in has been developed to allow IT administrators to remotely enable display of the printer IP address on the printer control panel display. To download this plug-in, please visit the HP web jetadmin software and components download site.

If the printer IP address is not displayed, you may determine the IP address by printing a Configuration Page from the printer control panel menu.

Download and Installation

Note: Before proceeding with the software installation, be aware that administrator privileges are required to install the software and configure the printing system.

Close any screen savers, virus protection programs, or other software programs running on your computer.
Click on Download Now and a File Download box will appear.
Select Save This Program to Disk and a Save As box will appear.
Select a directory to save the file in and click Save.
Locate the file using Windows Explorer when the download has completed.
Double click on the file. This will begin the installation process. During the install, you may choose to make the HP Mobile Printing the default system printer on your computer.
When the installation is complete, a new system printer named HP Mobile Printing will be located in the Printers folder on your computer.
Compañía
Hewlett Packard
Dispositivo
Impresoras y Plotters
Modelo
Hewlett Packard HP Color LaserJet 2550Ln
Descripción
Removal Tool
Sistema Operativo
Windows NT4-2000-XP
Idioma
Portuguese
Versión Driver
1.0.0.1
Tamaño
316Kb
Nombre del archivo
setconfig_exermtool.exe
Fecha
3 Jun 2005
Información
Download Info
If the following error message is encountered, please install this file for resolution.

This error message may occur with the following Hewlett-Packard LaserJet devices:
LaserJet 1010/1012/1015 Series
LaserJet 1150
LaserJet 1160
LaserJet 1300 Series
LaserJet 1320 Series
LaserJet 3015/3020/3030/3380 Series
Color LaserJet 2550
Note: If the error is encountered, it will be after the initial printer software install and upon consequential system reboots.

This section will help you in the download of the software to your computer and start you on the install process.
Close any screen savers, virus protection programs, or other software programs running on your computer.
Click on Download and a File Download box will appear.
Select Save This Program to Disk and a Save As box will appear.
Select a directory to save the file in and click Save.
Locate the file using Windows Explorer when the download has completed.
Double click on the file. It will execute and install the necessary files.




Compañía
Hewlett Packard
Dispositivo
Impresoras y Plotters
Modelo
Hewlett Packard HP Color LaserJet 2550Ln
Descripción
Installer Print Only Software Solution for v10.2 v10.3.x v10.4.x v10.5
Sistema Operativo
Mac OS X
Idioma
Portuguese Brazilian
Versión Driver
7.8.0.761
Tamaño
29.1Mb
Nombre del archivo
hp_laserjet_and_edgeline_print-only.dmg
Fecha
28 Jan 2008
Información
This download package contains HP LaserJet Mac OS X Installer Print Only Software Solution v7.8.0.761. Included are the HP Postscript PPD and PDE files for Mac OS X v10.2, v10.3.x, v10.4.x, v10.5 - PPC and Intel processor.
Supported Devices
HP color LaserJet 2500
HP color LaserJet 2550 series
HP color LaserJet 3700
HP color LaserJet 4600
HP color LaserJet 4650
HP color LaserJet 5500
HP Color LaserJet 5550
HP Color LaserJet 8500
HP Color LaserJet 8550
HP color LaserJet 9500
HP color LaserJet 9500 MFP
HP Color LaserJet
HP Color LaserJet 5/5M
HP Color LaserJet 4500
HP Color LaserJet 4550
HP LaserJet 1200
HP LaserJet 1300
HP LaserJet 1300n
HP LaserJet 1320 series
HP LaserJet 2100 Series
HP LaserJet 2200
HP LaserJet 4000 Series
HP LaserJet 4050 Series
HP LaserJet 4100 MFP
HP LaserJet 4100 Series
HP LaserJet 4200
HP LaserJet 4200L
HP LaserJet 4240
HP LaserJet 4240N
HP LaserJet 4250
HP LaserJet 4250L
HP LaserJet 4300
HP LaserJet 4350
HP LaserJet 4350L
HP LaserJet 4V
HP LaserJet 5000 Series
HP LaserJet 5100 Series
HP LaserJet 8000 Series
HP LaserJet 8100 Series
HP LaserJet 8150 Series
HP LaserJet 9000 MFP
HP LaserJet 9000L MFP
HP LaserJet 9000 Series
HP LaserJet 9040
HP LaserJet 9040 MFP
HP LaserJet 9050 MFP
HP LaserJet 9050
HP LaserJet 9055 mfp
HP LaserJet 9065 mfp
HP LaserJet 4 Plus
HP LaserJet 4ML
HP LaserJet 4MP
HP LaserJet 4Si
HP LaserJet 5M
HP LaserJet 5P
HP LaserJet 5Si
HP LaserJet 5Si Mopier
HP LaserJet 6P
HP Mopier 240
HP Mopier 320
HP LaserJet 1220
HP LaserJet 3015
HP LaserJet 3020
HP LaserJet 3030
HP LaserJet 3200
HP LaserJet 3300/3310/3320
HP LaserJet 3300
HP LaserJet 3380
HP business inkjet 2300
HP Business Inkjet 2600
HP Business Inkjet 2800
HP Business Inkjet 3000
HP officejet 9100 series
HP Business Inkjet 2250
HP Business Inkjet 2280
Compañía
Hewlett Packard
Dispositivo
Impresoras y Plotters
Modelo
Hewlett Packard HP Color LaserJet 2550Ln
Descripción
Firmware Update utility
Sistema Operativo
Mac OS X
Idioma
Russian
Versión Firmware
20040930
Tamaño
5.6Mb
Nombre del archivo
2550_fw_update20040930.dmg
Fecha
28 Jul 2005
Información
WARNING: Determine what the current firmware version of your printer is before downloading the update. If your printer already has the current version (20040930), downloading this file might cause possible performance issues. To determine the version of firmware of your HP Color LaserJet 2550 printer, print a Configuration Page by pressing the Go button (green) and the Cancel button (Red) on the printer's control panel. The firmware version is listed on the top left part of the page, under Product Information - Firmware Datecode.

Firmware Enhancements

These changes are implemented in the new version firmware 20040930:
Default screenmatch color treatment for non-driver PostScript jobs.
Enabled to set FONTSOURCE to a downloaded soft font via PJL.
Cyrillic/Greek/Hebrew font settings now available
Improved memory allocation for complex pages.
The default I/O timeout changed to 120 seconds.
Printing from Mac systems, and printing PDF files, will have an improved CMYK color adjustment.
Calibration will now occur on non-HP refilled cartridge that have the e-label set to "toner out".
Unexpected Paper Size messages are now bypassed by pressing Go or Cancel from the Toolbox utility.
The Supplies Status page will now include the part number for HP cartridges when recognizing a non-HP cartridge installed.
Monochrome print speed will increase by choosing "Print to Grayscale" in the driver's Color tab.

Note: This utility is in English only.

* You will need 20MB of disk space to use the Firmware Update Utility.

* The HP Color LaserJet 2550 series printer must be in a READY state and remain powered on during the entire firmware update process.

* The control panel of the printer will display a series of flashing lights.

* After the Firmware Update Utility has finished, the HP Color LaserJet 2550 series printer will display a solid green Ready light (second from the bottom). You may be prompted to reboot your computer.


Installation Instructions

(NOTE! If you use Internet Explorer to download the utility, it may strip the .dmg extension to the file. Simply re-add the .dmg extension and MAC OS X should recognize the file as a disk image)

This utility is for use on any OS X 10.2 or 10.3 Mac. It will NOT function in the MAC OS 9 environment.

It can only be used with a USB connection to the HP Color LaserJet 2550.

Instructions for upgrade

* For users connected via the network, please temporarily disconnect your HP Color LaserJet 2550 series printer from the network to ensure the network devices to not interrupt the FW upgrade process.
Mount the disk image containing the FW update.
Run the FW Update Application contained in the disk image.
Follow the onscreen prompts to continue.
When prompted, connect the printer via USB.
Upon finding an HP Color LaserJet 2550 series printer, the utility will prompt you to reboot the printer by simply turn the power off and back on. This ensures the printer is in a proper state to receive the update.
Once the printer has been rebooted, the utility will allow you to 'download' the firmware to the HP Color LaserJet 2550 series printer.
DO NOT POWER CYCLE THE PRINTER during the upgrade process or it will leave your printer in an unusable state.
One green LED will start flashing initially followed by 2 LED's flashing.
Once the LEDS stop flashing, the printer has updated and re-initialized, the firmware should be updated.
The firmware update can take up to 5 minutes to complete. Please be patient.
Compañía
Hewlett Packard
Dispositivo
Impresoras y Plotters
Modelo
Hewlett Packard HP Color LaserJet 2550Ln
Descripción
PostScript Driver
Sistema Operativo
Windows 2000-2003-XP
Idioma
Russian
Versión Driver
60.34.78.41
Tamaño
5.3Mb
Nombre del archivo
clj2550pswin2kxp2003-ru.exe
Información
Enhancements

Incorporated JPEG compression to reduce spool file size.
Resolves spoolsv.exe crash when printing some PowerPoint documents.
Control Panel simulator in the Services tab is now functional.

This section will help you in the download of the software to your computer and start you on the install process.
Before proceeding with the software installation, the printer must first be properly set up, and your computer must be ready to print.

DOWNLOAD AND EXTRACT THE SOFTWARE

Close any screen savers, virus protection programs, or other software programs running on your computer.
Click on Download Now and a File Download box will appear.
Select Save This Program to Disk and a Save As box will appear.
Select a directory to save the file in and click Save.
Locate the file using Windows Explorer when the download has completed.
Double click on the file. This will extract all the driver files into a directory on your hard drive. The directory these files are extracted to will have a similar name to the file that was downloaded (i.e., c:\clj2550ps). However, you can change the path and directory name at the time of extracting the file.
PLEASE USE THESE STEPS IF YOU ARE UPDATING THE HP COLOR LASERJET 2550 DRIVER
From the Windows XP desktop, click Start, and then Printers and Faxes (for Windows 2000, click Start, Settings and then Printers).
Right click on the hp color LaserJet 2550 PostScript icon or listing, and then click Properties.
Click the Advanced tab.
Make certain the Driver box displays hp color LaserJet 2550 PostScript, and then click New Driver.
In the Add Printer Driver Wizard window, click Have Disk, and then Browse.
Browse to the directory that the downloaded files where unzipped to.

NOTE: The default directory would be c:\clj2550pswin2kxp2003-xx (xx represents language, such as en for English)

The Look in box will display clj2550pswin2kxp2003-xx (xx represents language, such as en for English). Do not open any folders in this directory. The autorun.ini file should be in the File name box. Click Open.
On the Install From Disk window, click OK. The print driver name, hp color LaserJet 2550 PostScript, should be displayed. Click Next to continue.
When the update is finished, click OK to close the hp color LaserJet 2550 PostScript Properties window. The update is now complete.
PLEASE USE THESE STEPS IF THIS IS A FIRST TIME INSTALLATION OF THE HP COLOR LASERJET 2550 DRIVER:
Attach a USB or parallel cable to the printer and the computer.
The "Found New Hardware Wizard" should appear. Note: If attaching via a parallel cable it may be necessary to restart the computer for the "Found New Hardware Wizard" to appear.
For Windows XP
Choose "Install from a list or specific location (advanced)" and then click Next.
Select only the box next to "Include this location in the search" (clear all other check boxes) then click the browse button to locate the directory where the driver was extracted to in the steps above. The directory these files are extracted to will have a similar name to the file that was downloaded (i.e., c:\clj2550ps).
Click once on the directory name to highlight it then choose OK. The directory path then appears in the dialog.
Select the Next button. Files will be copied to the appropriate directories automatically.
Click the Finish button within the "New Hardware Wizard"
After several moments and message will appear on the system tray (at the bottom right of the screen near the clock) indicating that "Your new hardware has been installed and is ready to use.

For Windows 2000
Click the Next button to continue.
Choose "Search for a suitable driver form my device (recommended)" and then click Next.
Select only the box next to "Specify a location" (clear all other check boxes) and click Next.
Click the browse button to locate the directory where the driver was extracted to in the steps above. The directory these files are extracted to will have a similar name to the file that was downloaded (i.e., c:\clj2550ps).
Click once on the directory name to highlight it and then select the Open button.
Autorun.inf should appear in the "file name" box. Click the Open button.
Select OK. The wizard will find the driver for the device.
Click the Next button.
Click Finish. Several dialogs will appear and then disappear.
The printer driver is now installed.
Compañía
Hewlett Packard
Dispositivo
Impresoras y Plotters
Modelo
Hewlett Packard HP Color LaserJet 2550Ln
Descripción
PCL6 Driver
Sistema Operativo
Windows 2000-2003-XP
Idioma
Russian
Versión Driver
60.34.78.41
Tamaño
5.5Mb
Nombre del archivo
clj2550pcl6win2kxp2003-ru.exe
Información
Enhancements

Incorporated JPEG compression to reduce spool file size.
Resolves spoolsv.exe crash when printing some PowerPoint documents.
Control Panel simulator in the Services tab is now functional.

This section will help you in the download of the software to your computer and start you on the install process.
Before proceeding with the software installation, the printer must first be properly set up, and your computer must be ready to print.

DOWNLOAD AND EXTRACT THE SOFTWARE

Close any screen savers, virus protection programs, or other software programs running on your computer.
Click on Download Now and a File Download box will appear.
Select Save This Program to Disk and a Save As box will appear.
Select a directory to save the file in and click Save.
Locate the file using Windows Explorer when the download has completed.
Double click on the file. This will extract all the driver files into a directory on your hard drive. The directory these files are extracted to will have a similar name to the file that was downloaded (i.e., c:\clj2550pcl6). However, you can change the path and directory name at the time of extracting the file.
PLEASE USE THESE STEPS IF YOU ARE UPDATING THE HP COLOR LASERJET 2550 DRIVER
From the Windows XP desktop, click Start, and then Printers and Faxes (for Windows 2000, click Start, Settings and then Printers).
Right click on the hp color LaserJet 2550 PCL6 icon or listing, and then click Properties.
Click the Advanced tab.
Make certain the Driver box displays hp color LaserJet 2550 PCL6, and then click New Driver.
In the Add Printer Driver Wizard window, click Have Disk, and then Browse.
Browse to the directory that the downloaded files where unzipped to.

NOTE: The default directory would be C:\clj2550pcl6 (xx represents language, such as en for English)

The Look in box will display clj2550pcl6win2kxp2003-xx (xx represents language, such as en for English). Do not open any folders in this directory. The autorun.ini file should be in the File name box. Click Open.
On the Install From Disk window, click OK. The print driver name, hp color LaserJet 2550 PCL6, should be displayed. Click Next to continue.
When the update is finished, click OK to close the hp color LaserJet 2550 PCL6 Properties window. The update is now complete.
PLEASE USE THESE STEPS IF THIS IS A FIRST TIME INSTALLATION OF THE HP COLOR LASERJET 2550 DRIVER:
Attach a USB or parallel cable to the printer and the computer.
The "Found New Hardware Wizard" should appear. Note: If attaching via a parallel cable it may be necessary to restart the computer for the "Found New Hardware Wizard" to appear.
For Windows XP
Choose "Install from a list or specific location (advanced)" and then click Next.
Select only the box next to "Include this location in the search" (clear all other check boxes) then click the browse button to locate the directory where the driver was extracted to in the steps above. The directory these files are extracted to will have a similar name to the file that was downloaded (i.e., c:\clj2550pcl6).
Click once on the directory name to highlight it then choose OK. The directory path then appears in the dialog.
Select the Next button. Files will be copied to the appropriate directories automatically.
Click the Finish button within the "New Hardware Wizard"
After several moments and message will appear on the system tray (at the bottom right of the screen near the clock) indicating that "Your new hardware has been installed and is ready to use.

For Windows 2000
Click the Next button to continue.
Choose "Search for a suitable driver form my device (recommended)" and then click Next.
Select only the box next to "Specify a location" (clear all other check boxes) and click Next.
Click the browse button to locate the directory where the driver was extracted to in the steps above. The directory these files are extracted to will have a similar name to the file that was downloaded (i.e., c:\clj2550pcl6).
Click once on the directory name to highlight it and then select the Open button.
Autorun.inf should appear in the "file name" box. Click the Open button.
Select OK. The wizard will find the driver for the device.
Click the Next button.
Click Finish. Several dialogs will appear and then disappear.
The printer driver is now installed.
Compañía
Hewlett Packard
Dispositivo
Impresoras y Plotters
Modelo
Hewlett Packard HP Color LaserJet 2550Ln
Descripción
PCL6 Driver
Sistema Operativo
Windows 2000-2003-XP-Vista
Idioma
Russian
Versión Driver
4.5
Tamaño
18Mb
Nombre del archivo
hpupd45pcl632.exe
Fecha
1 Apr 2008
Información
The UPD version 4.5 is the latest version of HP's Universal Print Driver. Please review the entire documentation for information on issues resolved, performance improvements, and new behavior changes to the UPD.
Compañía
Hewlett Packard
Dispositivo
Impresoras y Plotters
Modelo
Hewlett Packard HP Color LaserJet 2550Ln
Descripción
Universal Print Driver PostScript
Sistema Operativo
Windows 2000-2003-XP-Vista
Idioma
Russian
Versión Driver
4.5
Tamaño
18.6Mb
Nombre del archivo
hpupd45ps32.exe
Fecha
1 Apr 2008
Información
The UPD version 4.5 is the latest version of HP's Universal Print Driver. Please review the entire documentation for information on issues resolved, performance improvements, and new behavior changes to the UPD.
Compañía
Hewlett Packard
Dispositivo
Impresoras y Plotters
Modelo
Hewlett Packard HP Color LaserJet 2550Ln
Descripción
Universal Print Driver PCL 5
Sistema Operativo
Windows 2000-2003-XP-Vista
Idioma
Russian
Versión Driver
4.5
Tamaño
17.8Mb
Nombre del archivo
hpupd45pcl532.exe
Fecha
1 Apr 2008
Información
The UPD version 4.5 is the latest version of HP's Universal Print Driver. Please review the entire documentation for information on issues resolved, performance improvements, and new behavior changes to the UPD.
Compañía
Hewlett Packard
Dispositivo
Impresoras y Plotters
Modelo
Hewlett Packard HP Color LaserJet 2550Ln
Descripción
Universal Print Driver x64 PostScript
Sistema Operativo
Windows 2003 64 bits-XP 64 bits-Vista 64 bits
Idioma
Russian
Versión Driver
4.5
Tamaño
19Mb
Nombre del archivo
hpupd45ps64.exe
Fecha
1 Apr 2008
Información
The UPD version 4.5 is the latest version of HP's Universal Print Driver. Please review the entire documentation for information on issues resolved, performance improvements, and new behavior changes to the UPD.
Compañía
Hewlett Packard
Dispositivo
Impresoras y Plotters
Modelo
Hewlett Packard HP Color LaserJet 2550Ln
Descripción
PCL6 Driver
Sistema Operativo
Windows 2003 64 bits-XP 64 bits-Vista 64 bits
Idioma
Russian
Versión Driver
4.5
Tamaño
18.2Mb
Nombre del archivo
hpupd45pcl664.exe
Fecha
1 Apr 2008
Información
The UPD version 4.5 is the latest version of HP's Universal Print Driver. Please review the entire documentation for information on issues resolved, performance improvements, and new behavior changes to the UPD.
Compañía
Hewlett Packard
Dispositivo
Impresoras y Plotters
Modelo
Hewlett Packard HP Color LaserJet 2550Ln
Descripción
PCL5 Driver
Sistema Operativo
Windows 2003 64 bits-XP 64 bits-Vista 64 bits
Idioma
Russian
Versión Driver
4.5
Tamaño
18.2Mb
Nombre del archivo
hpupd45pcl564.exe
Fecha
1 Apr 2008
Información
The UPD version 4.5 is the latest version of HP's Universal Print Driver. Please review the entire documentation for information on issues resolved, performance improvements, and new behavior changes to the UPD.
Compañía
Hewlett Packard
Dispositivo
Impresoras y Plotters
Modelo
Hewlett Packard HP Color LaserJet 2550Ln
Descripción
PCL6 Plug and Play Bundle
Sistema Operativo
Windows 98-Me-2000-2003-XP
Idioma
Russian
Versión Driver
2.0
Tamaño
11.7Mb
Nombre del archivo
clj2550pcl6-ru.exe
Información
Use this software for first time USB installations only. Do NOT attach USB cable until prompted by the installation program

If upgrading a previous installation please use the "HP Color LaserJet 2550 PCL6 driver" download and view the description which includes instructions for updating the driver.

HP Color LaserJet 2550 PCL6 Plug and Play Bundle provides the following:

An installation program to assist with installation.
The print drivers are the same as those found on the version 2.0 CD.
Windows 98/ME: 4.24.2550.400
Windows 2000/XP/2003: 60.034.78.41
Plug and Play installable drivers for 1284.4 communication with the device.
Plug and Play installable PCL6 printer driver.
The product CD can be used at a later time to install additional product software, such as Toolbox.
A silent install is provided by running the program from a DOS prompt with the following command line parameters:
lj2550pcl6-en.exe -s -a -silent

This section will help you in the download of the software to your computer and start you on the install process.
Before proceeding with the software installation, the printer must first be properly set up, and your computer must be ready to print.
Close any screen savers, virus protection programs, or other software programs running on your computer.
Click on Download Now and a File Download box will appear.
Select Save This Program to Disk and a Save As box will appear.
Select a directory to save the file in and click Save.
Locate the file using Windows Explorer when the download has completed.
Double click on the file. This will extract all the driver files into a directory on your hard drive. The default directory is Program Files\Hewlett-Packard\Color LaserJet 2550 Drivers. However, you can change the path and directory name at the time of extracting the file.
Follow the instructions presented by the installation program. Do NOT attach the USB cable to the printer until prompted by the installation program.
Compañía
Hewlett Packard
Dispositivo
Impresoras y Plotters
Modelo
Hewlett Packard HP Color LaserJet 2550Ln
Descripción
Firmware Update utility
Sistema Operativo
Windows 98-Me-2000-XP
Idioma
Russian
Versión Firmware
20040930
Tamaño
6.2Mb
Nombre del archivo
flash_5f2550_20040930_rev2.exe
Fecha
11 Oct 2004
Información
WARNING: Determine what the current firmware version of your printer is before downloading the update. If your printer already has the current version (20040930), downloading this file might cause possible performance issues. To determine the version of firmware of your HP Color LaserJet 2550 printer, print a Configuration Page by pressing the Go button (green) and the Cancel button (Red) on the printer's control panel. The firmware version is listed on the top left part of the page, under Product Information - Firmware Datecode.
Firmware Enhancements

These changes are implemented in the new version firmware 20040930:
Default screenmatch color treatment for non-driver PostScript jobs.
Enabled to set FONTSOURCE to a downloaded soft font via PJL.
Cyrillic/Greek/Hebrew font settings now available
Improved memory allocation for complex pages.
The default I/O timeout changed to 120 seconds.
Printing from Mac systems, and printing PDF files, will have an improved CMYK color adjustment.
Calibration will now occur on non-HP refilled cartridge that have the e-label set to "toner out".
Unexpected Paper Size messages are now bypassed by pressing Go or Cancel from the Toolbox utility.
The Supplies Status page will now include the part number for HP cartridges when recognizing a non-HP cartridge installed.
Monochrome print speed will increase by choosing "Print to Grayscale" in the driver's Color tab

Note: This utility is in English only.

* The HP Color LaserJet 2550 series Firmware Update Utility can be performed using either a Parallel or USB port.
When using the USB port, the HP Color LaserJet 2550 series software must be installed prior to using this utility.
When using the parallel port, the HP Color LaserJet 2550 series software does not need to be installed. Connect the 2550 series printer to a PC with the Firmware Update Utility loaded using a parallel cable.
* You will need 20MB of disk space to use the Firmware Update Utility.

* The HP Color LaserJet 2550 series printer must be in a READY state and remain powered on during the entire firmware update process.

* Administrator Privileges are required on the PC executing the utility.

* The control panel of the printer will display a series of flashing lights.

* After the Firmware Update Utility has finished, the HP Color LaserJet 2550 series printer will display a solid green Ready light (second from the bottom). Depending on the operating system on your PC, you may be prompted to reboot your computer.

This utility is for use on Windows 95, 98, ME, 2000 and XP. It can ONLY be used with parallel or USB connections.


Installation Instructions

* For users connected via the network, please temporarily disconnect your HP Color LaserJet 2550 series printer from the network to ensure the network devices to not interrupt the firmware upgrade process.

Parallel Cable connection
Connect a PC to the HP Color LaserJet 2550 series printer via a parallel cable.
You do not need to install the HP software for parallel upgrades.
If the "Add Hardware" wizard starts when you plug in the parallel cable, you can safely cancel it.
Double click the Flash Update utility.
Click 'OK' to begin the process. The utility will go through the following steps:
Close all toolbox and HP software running on the host PC.
Upload firmware to printer, at which point the printer lights will start flashing until complete.
Printer will then erase the old firmware and write the new firmware and reboot it.
Utility will prompt user to reboot PC (to synchronize the printer, restart Toolbox and the HP software)
DO NOT POWER CYCLE THE PRINTER during the upgrade process or it will leave your printer in an unusable state.
Once the utility is complete, it will prompt you to reboot your PC and printer to synchronize the printer and the HP Toolbox.
The firmware update can take up to 5 minutes to complete. Please be patient.
USB Connection
In order to use USB to update your printer, you must have the HP Color LaserJet 2550 series printer software installed on your PC.
You do NOT need to have toolbox installed. A driver only installation will work fine.
Ensure your HP Color LaserJet 2550 series printer is connected to the USB cable.
Double click the Flash Update utility.
Click 'OK' to begin the process. The utility will go through the following steps:
Close all Toolbox and HP software running on host PC.
Upload firmware to printer, at which point the printer lights will flash until complete.
Printer will then erase the old firmware and write the new firmware and reboot itself.
Utility will prompt user to reboot PC (to resync printer, restart toolbox and HP software)
DO NOT POWER CYCLE THE PRINTER during the upgrade process or it will leave your printer in an unusable state.
Once the utility is complete, it will prompt you to reboot your PC and printer to resync the printer and the HP Toolbox.
The firmware update can take up to 5 minutes to complete. Please be patient.
Compañía
Hewlett Packard
Dispositivo
Impresoras y Plotters
Modelo
Hewlett Packard HP Color LaserJet 2550Ln
Descripción
PostScript Driver
Sistema Operativo
Windows NT4
Idioma
Russian
Versión Driver
034.4100
Tamaño
1Mb
Nombre del archivo
clj2550pswinnt4-ru.exe
Información
This section will help you in the download of the software to your computer and start you on the install process.
Before proceeding with the software installation, the printer must first be properly set up, and your computer must be ready to print.
Turn on the printer first, then turn on the computer.
Close any screen savers, virus protection programs, or other software programs running on your computer.
Click on Download Now and a File Download box will appear.
Select Save This Program to Disk and a Save As box will appear.
Select a directory to save the file in and click Save.
Locate the file using Windows Explorer when the download has completed.
Double click on the file. This will extract all the driver files into a directory on your hard drive. The directory these files are extracted to will have a similar name to the file that was downloaded (i.e., c:\clj2550ps). However, you can change the path and directory name at the time of extracting the file.
Open the Printers Window (Click Start-Settings-Printers).
Update the printer if it was previously installed
Right click on the printer and select Properties from the pop menu.
On the General tab, select New Driver.
Click on the Warning Box that pops up.
A printer listing box will appear. Select Have Disk.
Another box Install from Disk appears.
Click the Browse to locate the expanded files directory (i.e., c:\clj2550ps).
Click on the file ending with .inf .
Click Open and then OK and let files install.
Add the printer if it hasn't been installed yet.
Click Add New Printer
Follow the instructions of the Add Printer Wizard.
Compañía
Hewlett Packard
Dispositivo
Impresoras y Plotters
Modelo
Hewlett Packard HP Color LaserJet 2550Ln
Descripción
PCL6 Driver
Sistema Operativo
Windows NT4
Idioma
Russian
Versión Driver
4.24.2550.400
Tamaño
2.9Mb
Nombre del archivo
clj2550pcl6winnt4-ru.exe
Información
This section will help you in the download of the software to your computer and start you on the install process.
Before proceeding with the software installation, the printer must first be properly set up, and your computer must be ready to print.
Turn on the printer first, then turn on the computer.
Close any screen savers, virus protection programs, or other software programs running on your computer.
Click on Download Now and a File Download box will appear.
Select Save This Program to Disk and a Save As box will appear.
Select a directory to save the file in and click Save.
Locate the file using Windows Explorer when the download has completed.
Double click on the file. This will extract all the driver files into a directory on your hard drive. The directory these files are extracted to will have a similar name to the file that was downloaded (i.e., c:\clj2550pcl6). However, you can change the path and directory name at the time of extracting the file.
Open the Printers Window (Click Start-Settings-Printers).
Update the printer if it was previously installed
Right click on the printer and select Properties from the pop menu.
On the General tab, select New Driver.
Click on the Warning Box that pops up.
A printer listing box will appear. Select Have Disk.
Another box Install from Disk appears.
Click the Browse to locate the expanded files directory (i.e., c:\clj2550pcl6).
Click on the file ending with .inf .
Click Open and then OK and let files install.
Add the printer if it hasn't been installed yet.
Click Add New Printer
Follow the instructions of the Add Printer Wizard.
Compañía
Hewlett Packard
Dispositivo
Impresoras y Plotters
Modelo
Hewlett Packard HP Color LaserJet 2550Ln
Descripción
Removal Tool
Sistema Operativo
Windows NT4-2000-XP
Idioma
Russian
Versión Driver
1.0.0.1
Tamaño
316Kb
Nombre del archivo
setconfig_exermtool.exe
Fecha
3 Jun 2005
Información
Download Info
If the following error message is encountered, please install this file for resolution.

This error message may occur with the following Hewlett-Packard LaserJet devices:
LaserJet 1010/1012/1015 Series
LaserJet 1150
LaserJet 1160
LaserJet 1300 Series
LaserJet 1320 Series
LaserJet 3015/3020/3030/3380 Series
Color LaserJet 2550
Note: If the error is encountered, it will be after the initial printer software install and upon consequential system reboots.

This section will help you in the download of the software to your computer and start you on the install process.
Close any screen savers, virus protection programs, or other software programs running on your computer.
Click on Download and a File Download box will appear.
Select Save This Program to Disk and a Save As box will appear.
Select a directory to save the file in and click Save.
Locate the file using Windows Explorer when the download has completed.
Double click on the file. It will execute and install the necessary files.




Compañía
Hewlett Packard
Dispositivo
Impresoras y Plotters
Modelo
Hewlett Packard HP Color LaserJet 2550Ln
Descripción
Universal Print Driver PCL 5
Sistema Operativo
Windows 2000-2003-XP-Vista
Idioma
Slovak
Versión Driver
4.5
Tamaño
17.8Mb
Nombre del archivo
hpupd45pcl532.exe
Fecha
1 Apr 2008
Información
The UPD version 4.5 is the latest version of HP's Universal Print Driver. Please review the entire documentation for information on issues resolved, performance improvements, and new behavior changes to the UPD.
Compañía
Hewlett Packard
Dispositivo
Impresoras y Plotters
Modelo
Hewlett Packard HP Color LaserJet 2550Ln
Descripción
Universal Print Driver PostScript
Sistema Operativo
Windows 2000-2003-XP-Vista
Idioma
Slovak
Versión Driver
4.5
Tamaño
18.6Mb
Nombre del archivo
hpupd45ps32.exe
Fecha
1 Apr 2008
Información
The UPD version 4.5 is the latest version of HP's Universal Print Driver. Please review the entire documentation for information on issues resolved, performance improvements, and new behavior changes to the UPD.
Compañía
Hewlett Packard
Dispositivo
Impresoras y Plotters
Modelo
Hewlett Packard HP Color LaserJet 2550Ln
Descripción
PCL6 Driver
Sistema Operativo
Windows 2000-2003-XP-Vista
Idioma
Slovak
Versión Driver
4.5
Tamaño
18Mb
Nombre del archivo
hpupd45pcl632.exe
Fecha
1 Apr 2008
Información
The UPD version 4.5 is the latest version of HP's Universal Print Driver. Please review the entire documentation for information on issues resolved, performance improvements, and new behavior changes to the UPD.
Compañía
Hewlett Packard
Dispositivo
Impresoras y Plotters
Modelo
Hewlett Packard HP Color LaserJet 2550Ln
Descripción
PCL5 Driver
Sistema Operativo
Windows 2003 64 bits-XP 64 bits-Vista 64 bits
Idioma
Slovak
Versión Driver
4.5
Tamaño
18.2Mb
Nombre del archivo
hpupd45pcl564.exe
Fecha
1 Apr 2008
Información
The UPD version 4.5 is the latest version of HP's Universal Print Driver. Please review the entire documentation for information on issues resolved, performance improvements, and new behavior changes to the UPD.
Compañía
Hewlett Packard
Dispositivo
Impresoras y Plotters
Modelo
Hewlett Packard HP Color LaserJet 2550Ln
Descripción
Universal Print Driver x64 PostScript
Sistema Operativo
Windows 2003 64 bits-XP 64 bits-Vista 64 bits
Idioma
Slovak
Versión Driver
4.5
Tamaño
19Mb
Nombre del archivo
hpupd45ps64.exe
Fecha
1 Apr 2008
Información
The UPD version 4.5 is the latest version of HP's Universal Print Driver. Please review the entire documentation for information on issues resolved, performance improvements, and new behavior changes to the UPD.
Compañía
Hewlett Packard
Dispositivo
Impresoras y Plotters
Modelo
Hewlett Packard HP Color LaserJet 2550Ln
Descripción
PCL6 Driver
Sistema Operativo
Windows 2003 64 bits-XP 64 bits-Vista 64 bits
Idioma
Slovak
Versión Driver
4.5
Tamaño
18.2Mb
Nombre del archivo
hpupd45pcl664.exe
Fecha
1 Apr 2008
Información
The UPD version 4.5 is the latest version of HP's Universal Print Driver. Please review the entire documentation for information on issues resolved, performance improvements, and new behavior changes to the UPD.
Compañía
Hewlett Packard
Dispositivo
Impresoras y Plotters
Modelo
Hewlett Packard HP Color LaserJet 2550Ln
Descripción
Printing software and utility
Sistema Operativo
Mac OS 9
Idioma
Spanish
Versión Utilities
4.1
Tamaño
4Mb
Nombre del archivo
clj2550mac9_x-sp.sit
Información
The HP LaserJet Installer provides HP LaserJet PostScript printing support for the Mac 9.1 and 9.2 operating systems.
Compañía
Hewlett Packard
Dispositivo
Impresoras y Plotters
Modelo
Hewlett Packard HP Color LaserJet 2550Ln
Descripción
Installer
Sistema Operativo
Mac OS 9
Idioma
Spanish
Versión Driver
4.1
Tamaño
4Mb
Nombre del archivo
clj2550installer-sp.sit
Información
HP Color LaserJet 2550 Installer for Mac OS 9.

Compañía
Hewlett Packard
Dispositivo
Impresoras y Plotters
Modelo
Hewlett Packard HP Color LaserJet 2550Ln
Descripción
Firmware Update utility
Sistema Operativo
Mac OS X
Idioma
Spanish
Versión Firmware
20040930
Tamaño
5.6Mb
Nombre del archivo
2550_fw_update20040930.dmg
Fecha
28 Jul 2005
Información
WARNING: Determine what the current firmware version of your printer is before downloading the update. If your printer already has the current version (20040930), downloading this file might cause possible performance issues. To determine the version of firmware of your HP Color LaserJet 2550 printer, print a Configuration Page by pressing the Go button (green) and the Cancel button (Red) on the printer's control panel. The firmware version is listed on the top left part of the page, under Product Information - Firmware Datecode.

Firmware Enhancements

These changes are implemented in the new version firmware 20040930:
Default screenmatch color treatment for non-driver PostScript jobs.
Enabled to set FONTSOURCE to a downloaded soft font via PJL.
Cyrillic/Greek/Hebrew font settings now available
Improved memory allocation for complex pages.
The default I/O timeout changed to 120 seconds.
Printing from Mac systems, and printing PDF files, will have an improved CMYK color adjustment.
Calibration will now occur on non-HP refilled cartridge that have the e-label set to "toner out".
Unexpected Paper Size messages are now bypassed by pressing Go or Cancel from the Toolbox utility.
The Supplies Status page will now include the part number for HP cartridges when recognizing a non-HP cartridge installed.
Monochrome print speed will increase by choosing "Print to Grayscale" in the driver's Color tab.

Note: This utility is in English only.

* You will need 20MB of disk space to use the Firmware Update Utility.

* The HP Color LaserJet 2550 series printer must be in a READY state and remain powered on during the entire firmware update process.

* The control panel of the printer will display a series of flashing lights.

* After the Firmware Update Utility has finished, the HP Color LaserJet 2550 series printer will display a solid green Ready light (second from the bottom). You may be prompted to reboot your computer.


Installation Instructions

(NOTE! If you use Internet Explorer to download the utility, it may strip the .dmg extension to the file. Simply re-add the .dmg extension and MAC OS X should recognize the file as a disk image)

This utility is for use on any OS X 10.2 or 10.3 Mac. It will NOT function in the MAC OS 9 environment.

It can only be used with a USB connection to the HP Color LaserJet 2550.

Instructions for upgrade

* For users connected via the network, please temporarily disconnect your HP Color LaserJet 2550 series printer from the network to ensure the network devices to not interrupt the FW upgrade process.
Mount the disk image containing the FW update.
Run the FW Update Application contained in the disk image.
Follow the onscreen prompts to continue.
When prompted, connect the printer via USB.
Upon finding an HP Color LaserJet 2550 series printer, the utility will prompt you to reboot the printer by simply turn the power off and back on. This ensures the printer is in a proper state to receive the update.
Once the printer has been rebooted, the utility will allow you to 'download' the firmware to the HP Color LaserJet 2550 series printer.
DO NOT POWER CYCLE THE PRINTER during the upgrade process or it will leave your printer in an unusable state.
One green LED will start flashing initially followed by 2 LED's flashing.
Once the LEDS stop flashing, the printer has updated and re-initialized, the firmware should be updated.
The firmware update can take up to 5 minutes to complete. Please be patient.
Compañía
Hewlett Packard
Dispositivo
Impresoras y Plotters
Modelo
Hewlett Packard HP Color LaserJet 2550Ln
Descripción
Installer Print Only Software Solution for v10.2 v10.3.x v10.4.x v10.5
Sistema Operativo
Mac OS X
Idioma
Spanish
Versión Driver
7.8.0.761
Tamaño
29.1Mb
Nombre del archivo
hp_laserjet_and_edgeline_print-only.dmg
Fecha
28 Jan 2008
Información
This download package contains HP LaserJet Mac OS X Installer Print Only Software Solution v7.8.0.761. Included are the HP Postscript PPD and PDE files for Mac OS X v10.2, v10.3.x, v10.4.x, v10.5 - PPC and Intel processor.
Supported Devices
HP color LaserJet 2500
HP color LaserJet 2550 series
HP color LaserJet 3700
HP color LaserJet 4600
HP color LaserJet 4650
HP color LaserJet 5500
HP Color LaserJet 5550
HP Color LaserJet 8500
HP Color LaserJet 8550
HP color LaserJet 9500
HP color LaserJet 9500 MFP
HP Color LaserJet
HP Color LaserJet 5/5M
HP Color LaserJet 4500
HP Color LaserJet 4550
HP LaserJet 1200
HP LaserJet 1300
HP LaserJet 1300n
HP LaserJet 1320 series
HP LaserJet 2100 Series
HP LaserJet 2200
HP LaserJet 4000 Series
HP LaserJet 4050 Series
HP LaserJet 4100 MFP
HP LaserJet 4100 Series
HP LaserJet 4200
HP LaserJet 4200L
HP LaserJet 4240
HP LaserJet 4240N
HP LaserJet 4250
HP LaserJet 4250L
HP LaserJet 4300
HP LaserJet 4350
HP LaserJet 4350L
HP LaserJet 4V
HP LaserJet 5000 Series
HP LaserJet 5100 Series
HP LaserJet 8000 Series
HP LaserJet 8100 Series
HP LaserJet 8150 Series
HP LaserJet 9000 MFP
HP LaserJet 9000L MFP
HP LaserJet 9000 Series
HP LaserJet 9040
HP LaserJet 9040 MFP
HP LaserJet 9050 MFP
HP LaserJet 9050
HP LaserJet 9055 mfp
HP LaserJet 9065 mfp
HP LaserJet 4 Plus
HP LaserJet 4ML
HP LaserJet 4MP
HP LaserJet 4Si
HP LaserJet 5M
HP LaserJet 5P
HP LaserJet 5Si
HP LaserJet 5Si Mopier
HP LaserJet 6P
HP Mopier 240
HP Mopier 320
HP LaserJet 1220
HP LaserJet 3015
HP LaserJet 3020
HP LaserJet 3030
HP LaserJet 3200
HP LaserJet 3300/3310/3320
HP LaserJet 3300
HP LaserJet 3380
HP business inkjet 2300
HP Business Inkjet 2600
HP Business Inkjet 2800
HP Business Inkjet 3000
HP officejet 9100 series
HP Business Inkjet 2250
HP Business Inkjet 2280
Compañía
Hewlett Packard
Dispositivo
Impresoras y Plotters
Modelo
Hewlett Packard HP Color LaserJet 2550Ln
Descripción
PCL6 Driver
Sistema Operativo
Windows 2000-2003-XP
Idioma
Spanish
Versión Driver
60.34.78.41
Tamaño
5.5Mb
Nombre del archivo
clj2550pcl6win2kxp2003-es.exe
Información
Enhancements

Incorporated JPEG compression to reduce spool file size.
Resolves spoolsv.exe crash when printing some PowerPoint documents.
Control Panel simulator in the Services tab is now functional.

This section will help you in the download of the software to your computer and start you on the install process.
Before proceeding with the software installation, the printer must first be properly set up, and your computer must be ready to print.

DOWNLOAD AND EXTRACT THE SOFTWARE

Close any screen savers, virus protection programs, or other software programs running on your computer.
Click on Download Now and a File Download box will appear.
Select Save This Program to Disk and a Save As box will appear.
Select a directory to save the file in and click Save.
Locate the file using Windows Explorer when the download has completed.
Double click on the file. This will extract all the driver files into a directory on your hard drive. The directory these files are extracted to will have a similar name to the file that was downloaded (i.e., c:\clj2550pcl6). However, you can change the path and directory name at the time of extracting the file.
PLEASE USE THESE STEPS IF YOU ARE UPDATING THE HP COLOR LASERJET 2550 DRIVER
From the Windows XP desktop, click Start, and then Printers and Faxes (for Windows 2000, click Start, Settings and then Printers).
Right click on the hp color LaserJet 2550 PCL6 icon or listing, and then click Properties.
Click the Advanced tab.
Make certain the Driver box displays hp color LaserJet 2550 PCL6, and then click New Driver.
In the Add Printer Driver Wizard window, click Have Disk, and then Browse.
Browse to the directory that the downloaded files where unzipped to.

NOTE: The default directory would be C:\clj2550pcl6 (xx represents language, such as en for English)

The Look in box will display clj2550pcl6win2kxp2003-xx (xx represents language, such as en for English). Do not open any folders in this directory. The autorun.ini file should be in the File name box. Click Open.
On the Install From Disk window, click OK. The print driver name, hp color LaserJet 2550 PCL6, should be displayed. Click Next to continue.
When the update is finished, click OK to close the hp color LaserJet 2550 PCL6 Properties window. The update is now complete.
PLEASE USE THESE STEPS IF THIS IS A FIRST TIME INSTALLATION OF THE HP COLOR LASERJET 2550 DRIVER:
Attach a USB or parallel cable to the printer and the computer.
The "Found New Hardware Wizard" should appear. Note: If attaching via a parallel cable it may be necessary to restart the computer for the "Found New Hardware Wizard" to appear.
For Windows XP
Choose "Install from a list or specific location (advanced)" and then click Next.
Select only the box next to "Include this location in the search" (clear all other check boxes) then click the browse button to locate the directory where the driver was extracted to in the steps above. The directory these files are extracted to will have a similar name to the file that was downloaded (i.e., c:\clj2550pcl6).
Click once on the directory name to highlight it then choose OK. The directory path then appears in the dialog.
Select the Next button. Files will be copied to the appropriate directories automatically.
Click the Finish button within the "New Hardware Wizard"
After several moments and message will appear on the system tray (at the bottom right of the screen near the clock) indicating that "Your new hardware has been installed and is ready to use.

For Windows 2000
Click the Next button to continue.
Choose "Search for a suitable driver form my device (recommended)" and then click Next.
Select only the box next to "Specify a location" (clear all other check boxes) and click Next.
Click the browse button to locate the directory where the driver was extracted to in the steps above. The directory these files are extracted to will have a similar name to the file that was downloaded (i.e., c:\clj2550pcl6).
Click once on the directory name to highlight it and then select the Open button.
Autorun.inf should appear in the "file name" box. Click the Open button.
Select OK. The wizard will find the driver for the device.
Click the Next button.
Click Finish. Several dialogs will appear and then disappear.
The printer driver is now installed.
Compañía
Hewlett Packard
Dispositivo
Impresoras y Plotters
Modelo
Hewlett Packard HP Color LaserJet 2550Ln
Descripción
PostScript Driver
Sistema Operativo
Windows 2000-2003-XP
Idioma
Spanish
Versión Driver
60.34.78.41
Tamaño
5.3Mb
Nombre del archivo
clj2550pswin2kxp2003-sp.exe
Información
Enhancements

Incorporated JPEG compression to reduce spool file size.
Resolves spoolsv.exe crash when printing some PowerPoint documents.
Control Panel simulator in the Services tab is now functional.

This section will help you in the download of the software to your computer and start you on the install process.
Before proceeding with the software installation, the printer must first be properly set up, and your computer must be ready to print.

DOWNLOAD AND EXTRACT THE SOFTWARE

Close any screen savers, virus protection programs, or other software programs running on your computer.
Click on Download Now and a File Download box will appear.
Select Save This Program to Disk and a Save As box will appear.
Select a directory to save the file in and click Save.
Locate the file using Windows Explorer when the download has completed.
Double click on the file. This will extract all the driver files into a directory on your hard drive. The directory these files are extracted to will have a similar name to the file that was downloaded (i.e., c:\clj2550ps). However, you can change the path and directory name at the time of extracting the file.
PLEASE USE THESE STEPS IF YOU ARE UPDATING THE HP COLOR LASERJET 2550 DRIVER
From the Windows XP desktop, click Start, and then Printers and Faxes (for Windows 2000, click Start, Settings and then Printers).
Right click on the hp color LaserJet 2550 PostScript icon or listing, and then click Properties.
Click the Advanced tab.
Make certain the Driver box displays hp color LaserJet 2550 PostScript, and then click New Driver.
In the Add Printer Driver Wizard window, click Have Disk, and then Browse.
Browse to the directory that the downloaded files where unzipped to.

NOTE: The default directory would be c:\clj2550pswin2kxp2003-xx (xx represents language, such as en for English)

The Look in box will display clj2550pswin2kxp2003-xx (xx represents language, such as en for English). Do not open any folders in this directory. The autorun.ini file should be in the File name box. Click Open.
On the Install From Disk window, click OK. The print driver name, hp color LaserJet 2550 PostScript, should be displayed. Click Next to continue.
When the update is finished, click OK to close the hp color LaserJet 2550 PostScript Properties window. The update is now complete.
PLEASE USE THESE STEPS IF THIS IS A FIRST TIME INSTALLATION OF THE HP COLOR LASERJET 2550 DRIVER:
Attach a USB or parallel cable to the printer and the computer.
The "Found New Hardware Wizard" should appear. Note: If attaching via a parallel cable it may be necessary to restart the computer for the "Found New Hardware Wizard" to appear.
For Windows XP
Choose "Install from a list or specific location (advanced)" and then click Next.
Select only the box next to "Include this location in the search" (clear all other check boxes) then click the browse button to locate the directory where the driver was extracted to in the steps above. The directory these files are extracted to will have a similar name to the file that was downloaded (i.e., c:\clj2550ps).
Click once on the directory name to highlight it then choose OK. The directory path then appears in the dialog.
Select the Next button. Files will be copied to the appropriate directories automatically.
Click the Finish button within the "New Hardware Wizard"
After several moments and message will appear on the system tray (at the bottom right of the screen near the clock) indicating that "Your new hardware has been installed and is ready to use.

For Windows 2000
Click the Next button to continue.
Choose "Search for a suitable driver form my device (recommended)" and then click Next.
Select only the box next to "Specify a location" (clear all other check boxes) and click Next.
Click the browse button to locate the directory where the driver was extracted to in the steps above. The directory these files are extracted to will have a similar name to the file that was downloaded (i.e., c:\clj2550ps).
Click once on the directory name to highlight it and then select the Open button.
Autorun.inf should appear in the "file name" box. Click the Open button.
Select OK. The wizard will find the driver for the device.
Click the Next button.
Click Finish. Several dialogs will appear and then disappear.
The printer driver is now installed.
Compañía
Hewlett Packard
Dispositivo
Impresoras y Plotters
Modelo
Hewlett Packard HP Color LaserJet 2550Ln
Descripción
PCL6 Driver
Sistema Operativo
Windows 2000-2003-XP-Vista
Idioma
Spanish
Versión Driver
4.5
Tamaño
18Mb
Nombre del archivo
hpupd45pcl632.exe
Fecha
1 Apr 2008
Información
The UPD version 4.5 is the latest version of HP's Universal Print Driver. Please review the entire documentation for information on issues resolved, performance improvements, and new behavior changes to the UPD.
Compañía
Hewlett Packard
Dispositivo
Impresoras y Plotters
Modelo
Hewlett Packard HP Color LaserJet 2550Ln
Descripción
Universal Print Driver PCL 5
Sistema Operativo
Windows 2000-2003-XP-Vista
Idioma
Spanish
Versión Driver
4.5
Tamaño
17.8Mb
Nombre del archivo
hpupd45pcl532.exe
Fecha
1 Apr 2008
Información
The UPD version 4.5 is the latest version of HP's Universal Print Driver. Please review the entire documentation for information on issues resolved, performance improvements, and new behavior changes to the UPD.
Compañía
Hewlett Packard
Dispositivo
Impresoras y Plotters
Modelo
Hewlett Packard HP Color LaserJet 2550Ln
Descripción
Universal Print Driver PostScript
Sistema Operativo
Windows 2000-2003-XP-Vista
Idioma
Spanish
Versión Driver
4.5
Tamaño
18.6Mb
Nombre del archivo
hpupd45ps32.exe
Fecha
1 Apr 2008
Información
The UPD version 4.5 is the latest version of HP's Universal Print Driver. Please review the entire documentation for information on issues resolved, performance improvements, and new behavior changes to the UPD.
Compañía
Hewlett Packard
Dispositivo
Impresoras y Plotters
Modelo
Hewlett Packard HP Color LaserJet 2550Ln
Descripción
PCL5 Driver
Sistema Operativo
Windows 2003 64 bits-XP 64 bits-Vista 64 bits
Idioma
Spanish
Versión Driver
4.5
Tamaño
18.2Mb
Nombre del archivo
hpupd45pcl564.exe
Fecha
1 Apr 2008
Información
The UPD version 4.5 is the latest version of HP's Universal Print Driver. Please review the entire documentation for information on issues resolved, performance improvements, and new behavior changes to the UPD.
Compañía
Hewlett Packard
Dispositivo
Impresoras y Plotters
Modelo
Hewlett Packard HP Color LaserJet 2550Ln
Descripción
PCL6 Driver
Sistema Operativo
Windows 2003 64 bits-XP 64 bits-Vista 64 bits
Idioma
Spanish
Versión Driver
4.5
Tamaño
18.2Mb
Nombre del archivo
hpupd45pcl664.exe
Fecha
1 Apr 2008
Información
The UPD version 4.5 is the latest version of HP's Universal Print Driver. Please review the entire documentation for information on issues resolved, performance improvements, and new behavior changes to the UPD.
Compañía
Hewlett Packard
Dispositivo
Impresoras y Plotters
Modelo
Hewlett Packard HP Color LaserJet 2550Ln
Descripción
Universal Print Driver x64 PostScript
Sistema Operativo
Windows 2003 64 bits-XP 64 bits-Vista 64 bits
Idioma
Spanish
Versión Driver
4.5
Tamaño
19Mb
Nombre del archivo
hpupd45ps64.exe
Fecha
1 Apr 2008
Información
The UPD version 4.5 is the latest version of HP's Universal Print Driver. Please review the entire documentation for information on issues resolved, performance improvements, and new behavior changes to the UPD.
Compañía
Hewlett Packard
Dispositivo
Impresoras y Plotters
Modelo
Hewlett Packard HP Color LaserJet 2550Ln
Descripción
PCL6 Plug and Play Bundle
Sistema Operativo
Windows 98-Me-2000-2003-XP
Idioma
Spanish
Versión Driver
2.0
Tamaño
11.7Mb
Nombre del archivo
clj2550pcl6-sp.exe
Información
Use this software for first time USB installations only. Do NOT attach USB cable until prompted by the installation program

If upgrading a previous installation please use the "HP Color LaserJet 2550 PCL6 driver" download and view the description which includes instructions for updating the driver.

HP Color LaserJet 2550 PCL6 Plug and Play Bundle provides the following:

An installation program to assist with installation.
The print drivers are the same as those found on the version 2.0 CD.
Windows 98/ME: 4.24.2550.400
Windows 2000/XP/2003: 60.034.78.41
Plug and Play installable drivers for 1284.4 communication with the device.
Plug and Play installable PCL6 printer driver.
The product CD can be used at a later time to install additional product software, such as Toolbox.
A silent install is provided by running the program from a DOS prompt with the following command line parameters:
lj2550pcl6-en.exe -s -a -silent

This section will help you in the download of the software to your computer and start you on the install process.
Before proceeding with the software installation, the printer must first be properly set up, and your computer must be ready to print.
Close any screen savers, virus protection programs, or other software programs running on your computer.
Click on Download Now and a File Download box will appear.
Select Save This Program to Disk and a Save As box will appear.
Select a directory to save the file in and click Save.
Locate the file using Windows Explorer when the download has completed.
Double click on the file. This will extract all the driver files into a directory on your hard drive. The default directory is Program Files\Hewlett-Packard\Color LaserJet 2550 Drivers. However, you can change the path and directory name at the time of extracting the file.
Follow the instructions presented by the installation program. Do NOT attach the USB cable to the printer until prompted by the installation program.
Compañía
Hewlett Packard
Dispositivo
Impresoras y Plotters
Modelo
Hewlett Packard HP Color LaserJet 2550Ln
Descripción
Firmware Update utility
Sistema Operativo
Windows 98-Me-2000-XP
Idioma
Spanish
Versión Firmware
20040930
Tamaño
6.2Mb
Nombre del archivo
flash_5f2550_20040930_rev2.exe
Fecha
11 Oct 2004
Información
WARNING: Determine what the current firmware version of your printer is before downloading the update. If your printer already has the current version (20040930), downloading this file might cause possible performance issues. To determine the version of firmware of your HP Color LaserJet 2550 printer, print a Configuration Page by pressing the Go button (green) and the Cancel button (Red) on the printer's control panel. The firmware version is listed on the top left part of the page, under Product Information - Firmware Datecode.
Firmware Enhancements

These changes are implemented in the new version firmware 20040930:
Default screenmatch color treatment for non-driver PostScript jobs.
Enabled to set FONTSOURCE to a downloaded soft font via PJL.
Cyrillic/Greek/Hebrew font settings now available
Improved memory allocation for complex pages.
The default I/O timeout changed to 120 seconds.
Printing from Mac systems, and printing PDF files, will have an improved CMYK color adjustment.
Calibration will now occur on non-HP refilled cartridge that have the e-label set to "toner out".
Unexpected Paper Size messages are now bypassed by pressing Go or Cancel from the Toolbox utility.
The Supplies Status page will now include the part number for HP cartridges when recognizing a non-HP cartridge installed.
Monochrome print speed will increase by choosing "Print to Grayscale" in the driver's Color tab

Note: This utility is in English only.

* The HP Color LaserJet 2550 series Firmware Update Utility can be performed using either a Parallel or USB port.
When using the USB port, the HP Color LaserJet 2550 series software must be installed prior to using this utility.
When using the parallel port, the HP Color LaserJet 2550 series software does not need to be installed. Connect the 2550 series printer to a PC with the Firmware Update Utility loaded using a parallel cable.
* You will need 20MB of disk space to use the Firmware Update Utility.

* The HP Color LaserJet 2550 series printer must be in a READY state and remain powered on during the entire firmware update process.

* Administrator Privileges are required on the PC executing the utility.

* The control panel of the printer will display a series of flashing lights.

* After the Firmware Update Utility has finished, the HP Color LaserJet 2550 series printer will display a solid green Ready light (second from the bottom). Depending on the operating system on your PC, you may be prompted to reboot your computer.

This utility is for use on Windows 95, 98, ME, 2000 and XP. It can ONLY be used with parallel or USB connections.


Installation Instructions

* For users connected via the network, please temporarily disconnect your HP Color LaserJet 2550 series printer from the network to ensure the network devices to not interrupt the firmware upgrade process.

Parallel Cable connection
Connect a PC to the HP Color LaserJet 2550 series printer via a parallel cable.
You do not need to install the HP software for parallel upgrades.
If the "Add Hardware" wizard starts when you plug in the parallel cable, you can safely cancel it.
Double click the Flash Update utility.
Click 'OK' to begin the process. The utility will go through the following steps:
Close all toolbox and HP software running on the host PC.
Upload firmware to printer, at which point the printer lights will start flashing until complete.
Printer will then erase the old firmware and write the new firmware and reboot it.
Utility will prompt user to reboot PC (to synchronize the printer, restart Toolbox and the HP software)
DO NOT POWER CYCLE THE PRINTER during the upgrade process or it will leave your printer in an unusable state.
Once the utility is complete, it will prompt you to reboot your PC and printer to synchronize the printer and the HP Toolbox.
The firmware update can take up to 5 minutes to complete. Please be patient.
USB Connection
In order to use USB to update your printer, you must have the HP Color LaserJet 2550 series printer software installed on your PC.
You do NOT need to have toolbox installed. A driver only installation will work fine.
Ensure your HP Color LaserJet 2550 series printer is connected to the USB cable.
Double click the Flash Update utility.
Click 'OK' to begin the process. The utility will go through the following steps:
Close all Toolbox and HP software running on host PC.
Upload firmware to printer, at which point the printer lights will flash until complete.
Printer will then erase the old firmware and write the new firmware and reboot itself.
Utility will prompt user to reboot PC (to resync printer, restart toolbox and HP software)
DO NOT POWER CYCLE THE PRINTER during the upgrade process or it will leave your printer in an unusable state.
Once the utility is complete, it will prompt you to reboot your PC and printer to resync the printer and the HP Toolbox.
The firmware update can take up to 5 minutes to complete. Please be patient.
Compañía
Hewlett Packard
Dispositivo
Impresoras y Plotters
Modelo
Hewlett Packard HP Color LaserJet 2550Ln
Descripción
PostScript Driver
Sistema Operativo
Windows NT4
Idioma
Spanish
Versión Driver
034.4100
Tamaño
1Mb
Nombre del archivo
clj2550pswinnt4-sp.exe
Información
This section will help you in the download of the software to your computer and start you on the install process.
Before proceeding with the software installation, the printer must first be properly set up, and your computer must be ready to print.
Turn on th