BenQ DVP 1640A2 Descargar Drivers y Firmware

Compañía
BenQ
Dispositivo
Lectores-Grabadores de CD-DVD-Blu-Ray
Modelo
BenQ DVP 1640A2
Descripción
Firmware Version detection tool for MS Windows
Sistema Operativo
Applications
Versión Firmware
1.0
Tamaño
48Kb
Nombre del archivo
cdrominq.exe
Información
Firmware Version detection tool for MS Windows. IDE drive firmware detection tool. Run this to find out the current firmware version of your IDE drives ( CDROM / DVDROM / CDREWRITER ). Works in MS Windows.
Compañía
BenQ
Dispositivo
Lectores-Grabadores de CD-DVD-Blu-Ray
Modelo
BenQ DVP 1640A2
Descripción
Firmware update
Sistema Operativo
Firmware update
Versión Firmware
1.21
Tamaño
167Kb
Nombre del archivo
1640a2-121.zip
Información
Firmware update for the 1640A2 DVD-ROM drive. DVD-ROM Upgrade operation

Upgarde procedure is as the following.

1. Unzip the attached file.
2. DVD-ROM connect to Secondary IDE channel with master configuration.
3. Boot the PC with MS-DOS mode.
(Attention ! : Upgarade utility cannot work on MS-DOS window.)
4. Execute up.bat

1640a2-121.ZIP include the following files.

atacm121.HEX (Firmware file)
UPG5A.EXE (Upgrade Utility)
UP.BAT (Upgrade Batch File)
UPDATE.TXT (This File)
Compañía
BenQ
Dispositivo
Lectores-Grabadores de CD-DVD-Blu-Ray
Modelo
BenQ DVP 1640A2
Descripción
Firmware Check
Sistema Operativo
Tool
Versión Firmware
1.0
Tamaño
22Kb
Nombre del archivo
fwcheck.zip
Información
Please use this tool to check your current firmware.
Compañía
BenQ
Dispositivo
Lectores-Grabadores de CD-DVD-Blu-Ray
Modelo
BenQ DVP 1640A2
Descripción
CDROM-DVDROM-CDREWRITER MS-DOS Driver
Sistema Operativo
MS-DOS
Idioma
English, Spanish, German, Italian, and French
Versión Driver
2.14
Tamaño
177Kb
Nombre del archivo
apicd214.exe
Información
CDROM / DVDROM / CDREWRITER MS-DOS Driver . Self-extracting ZIP file containing device driver file for MS-DOS Only

A B O U T C D - R O M D E V I C E D R I V E R
=======================================================================

To install the CD-ROM device driver, the syntax in CONFIG.SYS
is as follows:

DEVICE=VIDE-CDD.SYS /D:MSCD001 [/P:xxx,yy] [/L:xx]

where [/P:xxx,yy]
specifies the IDE port which is connected to the drive and the
interrupt request.

'xxx' is the base address (hexadecimal notation) of IDE port.
xxx = 1f0 : Port 1
170 : Port 2
1e8 : Port 3
168 : Port 4

'yy' is the interrupt number (decimal notation) of the
corresponding IDE port.

[/L:xx]
specifies the message language. Available options are listed
as below:

xx = US : English (the default language)
GR : German
FR : French
SP : Spanish
IT : Italian
JP : Japanese

For example, when eight drives are installed, the command
line in the CONFIG.SYS file could be entered as follows:

DEVICE=VIDE-CDD.SYS /D:MSCD001 /P:1f0,14 /P:170,15 /P:1e8,12 /P:168,10

NOTE:

Our device driver will automatically search the drives for 4 ports
up to 8 drives, and the ports are 0x1f0, 0x170, 0x1e8 and 0x168 with
interrupt number 14, 15, 12 and 10 as default, respectively. If your
IDE ports and their respective interrupt numbers are the same as
those mentioned above, you don't have to specify them verbosely.
Disponibles 4 archivos para DVP 1640A2
HelpDrivers Desde Marzo del 2000