D-Link DWL-8200AP Revision A3 Descargar Drivers, Manuales y Firmware

Compañía
D-Link
Dispositivo
Tarjetas de Red
Modelo
D-Link DWL-8200AP Revision A3
Descripción
802.11a/g Enterprise Access Point with PoE and Management Firmware
Sistema Operativo
Firmware
Versión Firmware
2.00
Tamaño
1.5Mb
Nombre del archivo
dwl_8200ap_firmware2.00rc152_hw_reva2_a3.zip
Información
DWL-8200 AP Firmware Release Note

Firmware: v2.00rc152
Hardware:A2
Date: May.31, 2007

Problem Resolved:
1. [APMII]When reboot after data rate control setting by APMII, APMII doesn’t synchronize with WEB.
Enhancements:
None

Firmware: v2.00rc151
Hardware:A2
Date: May.31, 2007

Problem Resolved:
1. [APMII]The system time, displayed in system information ,different with the time in SNTP.
Enhancements:
None

Firmware: v2.00rc114
Hardware:A2
Date: Apr.19, 2007

Problem Resolved:
1. [WEB]The system time,displayed in system information webpage,different with the time in SNTP webpage.
2. [FW] AP will stop serveice,when stations keep re-authenticate(WPA) with MSSID several days later.
3. [FW]remove auto saving mechanism of config file.
4. [FW]ASSOC ID leak.
Enhancements:
None
Compañía
D-Link
Dispositivo
Tarjetas de Red
Modelo
D-Link DWL-8200AP Revision A3
Descripción
802.11a/g Enterprise Access Point with PoE and Management Firmware
Sistema Operativo
Firmware
Versión Firmware
1.20rc043
Tamaño
1.7Mb
Nombre del archivo
dwl-8200ap_fw_v120-rc043.zip
Información
DWL-8200AP 1Add fw upgrade protection policy 2Support 64Bytes username length for radius authentication 3Support 64 char DWL-8200 AP Firmware Release Note
Firmware: v1.20rc043
Hardware:
Date: Sep. 15, 2006

Problem Resolved:
1. The Korea domain should not support turbo mode in 11g band.
Enhancements:
None

Firmware: v1.20rc042
Hardware:
Date: Sep. 14, 2006

Problem Resolved:
1. [DIAP][WEB]"Domain Name" in DHCP,which set by AP Manager v1.20 can not display to the Web page.
Enhancements:
1. Modify the Korea channel to [36, 40, 44, 48, 52, 56, 60, 64, 100, 104, 108, 112, 116, 120, 124, 149, 153, 157, 161]

Firmware: v1.20rc025
Hardware:
Date: Aug. 23, 2006

Problem Resolved:
None
Enhancements:
1. remove character filter for SSID setting.

Firmware: v1.20rc024
Hardware:
Date: Aug. 23, 2006

Problem Resolved:
1. Task dead(failed reboot,after apply setting) when change apmode from WDS to AP by D-View.
2. User cann't get wdsclient info at each side,when reboot device on both side at the same time.
3. When multi-state enable,and set ssid like "%*",ap will reboot continually.

Enhancements:
2. Add Telnet command “Get PassPhrase” to display passphrase of wpa-psk
3. Add Telnet command “Get RadiusSecret” to display Radius Secret
4. add character filter for SSID,0x20~0x7F(ASCII) set is supported.
Compañía
D-Link
Dispositivo
Tarjetas de Red
Modelo
D-Link DWL-8200AP Revision A3
Descripción
802.11a/g Enterprise Access Point with PoE and Management Firmware
Sistema Operativo
Firmware
Versión Firmware
1.10r0474
Tamaño
1.6Mb
Nombre del archivo
dwl-8200ap_fw_1-10r0474.zip
Información
DWL-8200AP Problems Resolved: 1 Web page: If set password more than four bit apply button in SNTP page then AP will reboot
Compañía
D-Link
Dispositivo
Tarjetas de Red
Modelo
D-Link DWL-8200AP Revision A3
Descripción
802.11a/g Enterprise Access Point with PoE and Management Firmware
Sistema Operativo
Firmware
Versión Firmware
2.10
Tamaño
1.5Mb
Nombre del archivo
dwl-8200ap_fw_v210-rc394.zip
Información
Problems Resolved:
1. [SNMP] dot11SecAccountingServerPort node can not get value.
2. [WEB] When VLAN state is enabled, change the MSSID’s security will disable MSSID’s state.
3. [Firmware] STA couldn’t connect to multi-ssid of 11a band when eth, wlan0, wlan1 use the same mac address. So change the mac address rule back to original
4. [Firmware] It should send an IAPP-ADD-Notify packet when STA roaming to AP2 from AP1, not only an IAPP-Move-Notify packet.
5. [Firmware] Change the MAC address rule, eth, wlan0, wlan1 use the same mac address.
6. [SNMP] Fix SNMP show "00:00:00:00:00:00" mac address in 11A band.
7. [MIB] Support WDS client info.
8. [FW] Intel WiFi Link 4965AGN can’t connect to AP if authentication is WPA/WPA2 PSK, and vlan state is enabled.
9. [FW] Fix the Microsoft SilverlightIE compatibility issue.
10. [FW] Fix the WDS channel for AU domain.
11. [FW] AP couldn’t connect to fast radius.
12. [WEB] The Vlan tag mode should be set to Manual when Authentication is not WPA in multi-ssid page.
13. [WEB] If enable Vlan state when the AP mode is WDS, it should pop up a warning message.
14. [WEB] AP will crash if save Rouge AP detection info before the Radar scan complete.
15. [WEB] User can’t configure a valid IP address(such as X.255.X.X or X.X.255.X) as a DHCP Start Address in DHCP Server page.
16. [FW] Can’t set the ip address successful when change the boot mode from normal mode to art mode.
17. [FW] D-View module of DWL-8200AP can't work on D-View 5.1
18. [FW] A/G band IGMP snp can not play simultaneous
19. [WEB] The dynamic vlan mode can not set successful on the multi-ssid page of 802.11a.
20. [WEB] If set the authentication to WPA-EAP, the multi-ssid page display imperfectly.
21. [WEB] User can’t set Wireless MAC ACL.
22. [WEB] If ap mode is not normal ap, then Grouping should be gray and can't set.
23. [WEB] Enable VLAN State when the multi state is disabled, the radio button of band should point to “both”.
24. [WEB] There should be a warning message, when changing primary ssid’s authentication will affect MSSID’s authentication.
25. [CLI] When WDS or WDS with AP mode is set, disable CLI command about ratecontrol and supportrate.
26. [FW] Only permit user manage the ap through Lan1.
27. [FW] Mssid over WDS function has some conflict with Mssid Eth to WM filter policy, it won’t take effect if the Mssid Eth to WM filter policy is enable.
28. [FW] Broadcast packets may miss four bytes if Vlan is enable, this will cause two station can not communicate between 802.11a&802.11g on the same vlan.
29. [FW] Trap can’t send.
30. [WEB] Can not change ap mode in 11g.
31. [FW]When MSSID is enabled and authentication type is WPA-PSK in secondary SSID, the STAs which associated to secondary SSID failed to ping each other.
32. [WEB]WDS mode shows incorrectly in 11g.
33. [WEB] Change setting for multi-ssid, and switch to wireless page, the rompager task would crash sometimes.
34. [WEB] The info of key type of WEP is not consistent between 11a and 11g.
35. Could not update fireware successfully from web.
36. The length of EAP passphrase has some problem.
37. The item of channel selection for SG domain has some problem in WDS mode.

Enhancements:
1. [FW] Support APMII v2.0.
2. [FW] Modify the channel list in 11a band for U3 domain.
3. [FW] Support DFS and TPC for AU domain.
4. [FW] Enhance the MSSID over WDS function, allow user change the security settings of MSSID when the ap mpde is WDS with AP.
5. [FW]Support maximum community string length to 32 characters.
6. [FW] Modify the channel list in 11a band as the latest output power table sepc.
7. [FW] Support WDS and WDS with AP mode in 11a for the United Kingdom (EU) domain, and restrict the channel to 36-48.
8. .[WEB] For EU domain, remove individual country setting in 11a.
9. [FW] Support NAP function based on dynamic vlan.
10. [FW] Supprot ETSI DFS2.
11. [FW] Support Primary SSID with VLAN tag function
12. [FW] Support Administration VLAN(Manage VLAN) , administrate AP with WLAN and management IP range function
13. [FW] Trap server settings(categorize the types of traps)
14. [FW] Support MSSID over WDS
15. [FW] WMM over WDS
16. [FW] Priority by SSID
17. [FW] IGMP Snooping (v1/v2)
18. [FW] 802.1X Dynamic VLAN
19. [FW] Data Rate Control follows Dlink new spec.
20. [FW] Support IAPP (fast roaming)
21. [FW] Enable/Disable ping
22. Secondary RADIUS server setting
23. [FW] AP status on UI (also on MIB)
a) CPU and Memory utilization
b) Statistics for Ethernet TX and RX bytes and packets
24. [WEB]SSID change wireless network name (SSID)
25. [MIB]Support 802.11MIB
26. [MIB]Support MIB-II (RFC-1213)
27. [MIB]Support Trap002-1 spec
Compañía
D-Link
Dispositivo
Tarjetas de Red
Modelo
D-Link DWL-8200AP Revision A3
Descripción
802.11a/g Enterprise Access Point with PoE and Management User Manual
Sistema Operativo
Manual
Tamaño
7Mb
Nombre del archivo
dwl-8200ap_manual_100.pdf
Información
Table of Contents .............................................................................2
Package Contents ............................................................................3
Introduction .....................................................................................4
Features and Benefits .......................................................................6
Wireless Basics ................................................................................7
Three Operational Modes ...............................................................10
Getting Started ...............................................................................11
Using the Configuration Menu .......................................................14
Using the AP Manager ...................................................................59
Networking Basics .........................................................................99
Troubleshooting ...........................................................................115
Technical Specifications ...............................................................121
Contacting Technical Support ......................................................124
Warranty ....................................................................................125
Registration .................................................................................129

? D-Link Air Premier® DWL-8200AP
Managed Dualband Access Point
? Power over Ethernet base unit
? Power Adapter-DC 48V, 0.4A
? Power Cord
? Manual and Warranty on CD
? Quick Installation Guide
? Ethernet Cable
? Mounting Plate
Note: Using a power supply with a different voltage than the one included with the DWL-8200AP will cause damage and void the warranty for this product.
If any of the above items are missing, please contact your reseller.

Minimum System Requirements
? Computers with Windows, Macintosh, or Linux-based operating systems with an installed Ethernet Adapter
? Internet Explorer version 6.0 or Netscape Navigator version 7.0 and above
? At least 128MB of memory and a 500MHz processor
Introduction
At up to fifteen times the speed of previous wireless devices (maximum wireless signal rate of up to 108Mbps* in Super A and Super G mode), you can work faster and more efficiently, increasing productivity. With the DWL-8200AP, bandwidth-intensive applications like graphics or multimedia will benefit significantly because large files are able to move across the network quickly.
Inclusion of all three standards (802.11a; 802.11b; 802.11g) means that the DWL-8200AP is versatile enough to allow connection to almost any 802.11 network or device.
The DWL-8200AP is capable of operating in one of 3 different modes to meet your wireless networking needs. The DWL-8200AP can operate as an access point, or in WDS (Wireless Distribution System) with AP, or in WDS mode.
Use less wiring, enjoy increased flexibility, save time and money with PoE (Power over Ethernet). With PoE, the DWL-8200AP shares power and data over the CAT5 cable, making the setup of your network less expensive and more convenient.
An ideal solution for quickly creating and extending a wireless local area network (WLAN) in offices or other workplaces, trade shows and special events, the DWL-8200AP provides data transfers at up to 108Mbps in Super A and Super G mode when used with other D-Link Air Premier® or Air Premier AG® products (The 802.11g standard is backwards compatible with 802.11b devices).
Compañía
D-Link
Dispositivo
Tarjetas de Red
Modelo
D-Link DWL-8200AP Revision A3
Descripción
802.11a/g Enterprise Access Point with PoE and Management Datasheet
Sistema Operativo
Manual
Tamaño
849Kb
Nombre del archivo
dwl-8200ap_datasheet.pdf
Información
The DWL-8200AP is a business-class 802.11a/g dualband access point that provides
secure and manageable dualband wireless LAN options. With wireless speeds of up to
108Mbps and dual high-gain dualband antennas, this access point provides optimal
wireless coverage in both the 5GHz 802.11a and 2.4GHz 11g frequency bands. Enclosed in
a plenum metal chassis, the DWL-8200AP adheres to strict fire codes and ensures
complete safety. For advanced installations, this access point has an integrated 802.3af
Power over Ethernet (PoE) support, allowing installation of this device in areas where power
outlets are not readily available.
Dualband Operation. The DWL-8200AP delivers concurrent wireless performance with
maximum wireless signal rates of up to 54Mbps (108Mbps Turbo mode) in both frequency
bands simultaneously. With dualband connectivity, 2 networks are created both running at
full bandwidth speeds, offering a significant increase in total network capacity. At the same
time, the DWL-8200AP remains fully backward compatible with the IEEE 802.11b standard
in the 2.4GHz frequency.
Advanced Security. The DWL-8200AP provides the latest wireless security technologies by
supporting both Personal and Enterprise versions of WPA and WPA2 (also known as
802.11i) with RADIUS support to ensure complete network protection. Other security
features included in this access point are MAC address filtering, wireless LAN
segmentation, disable SSID broadcast, and support for Advanced Encryption Standard
(AES) data encryption.
Multiple SSID. For additional network access security, if the DWL-8200AP is connected to a
switch that supports VLAN tagging (802.1q), the VLAN enabled DWL-8200AP can
appropriately provide network access options. Based on VLAN tagging infrastructure, the
DWL-8200AP also features multiple SSID support to further help segment users on the
network. The DWL-8200AP includes a wireless client isolation mechanism, which limits
direct client-to-client communication.
Multiple Operation Modes. The DWL-8200AP can be configured to operate as an access
point, Wireless Distribution System (WDS) with access point, or WDS wireless backbone.
With WDS support, network administrators can set up multiple DWL-8200APs throughout
the facility and configure them to bridge with one another on one band and provide network
access on the other.
Network Management. The DWL-8200AP can be configured via a web-based utility or
Telnet. D-Link's AP Manager or D-View SNMP management module can be used to
manage multiple access points from a single location. In addition to a streamlined
management process, the AP Manager or D-View software provide network administrators
with the means of verifying and conducting regular maintenance checks without wasting
resources by sending personnel out to physically verify proper operation.
Compañía
D-Link
Dispositivo
Tarjetas de Red
Modelo
D-Link DWL-8200AP Revision A3
Descripción
802.11a/g Enterprise Access Point with PoE and Management User Manual v2.20
Sistema Operativo
Manual
Tamaño
13.2Mb
Nombre del archivo
dwl-8200ap_manual_2.20(b).pdf
Información
Product Overview.........................................................4
Package Contents....................................................4
Minimum System Requirements...............................4
Introduction...............................................................5
Features & Benefits..................................................7
Wireless Basics........................................................8
Standards-based Technology...................................9
Installation Considerations.....................................10
Three Operational Modes.......................................11
Installation...................................................................12
Connecting PoE (Power over Ethernet).................14
Hardware Overview................................................15
Configuration..............................................................16
Logging In...............................................................16
Home > Basic Settings > Wireless.........................18
AP Mode > WEP Encryption...................................20
AP Mode > WPA-Enterprise, WPA2-Enterprise &
WPA-Auto Enterprise........................................21
AP Mode > WPA-Personal, WPA2-Personal &
WPA-Auto Personal..........................................22
WDS with AP Mode ..............................................23
WDS with AP Mode > WEP Encryption...........25
WDS with AP Mode > WPA-Personal, WPA2-
Personal, WPA-Auto Personal..........................26
WDS Mode.............................................................27
WDS Mode > WEP Encryption........................29
WDS Mode > WPA-Personal, WPA2-Personal, WPAAuto
Personal...................................................30
Home > Basic Settings > LAN .........................32
Home > Advanced Settings > Performance...........33
Home > Advanced Settings > Grouping...........36
Home > Advanced Settings > Multi-SSID.........37
Home > Advanced Settings > Rogue AP..........40
DHCP Server > Dynamic Pool Settings...........41
DHCP Server > Static Pool Settings................43
DHCP Server > Current IP List........................44
Filters >Wireless MAC ACL..............................46
Filters > WLAN Partition...................................47
Home > Status > Device Information......................48
Client Information.............................................49
WDS Information.............................................50
Stats > WLAN 802.11a Statistics.....................51
Ethernet Traffic Statistics..................................52
Stats > WLAN 802.11g Statistics......................53
Log > View Log................................................55
Log > Log Settings...........................................56
Tool Menu...............................................................57
Administrator Settings......................................58
Firmware and SSL Certification Upload...........60
Configuration File Upload and Download........61
Configuration File > Upload..............................62
Tool > SNTP.....................................................63
System > System Settings......................................64
Compañía
D-Link
Dispositivo
Tarjetas de Red
Modelo
D-Link DWL-8200AP Revision A3
Descripción
802.11a/g Enterprise Access Point with PoE and Management Quick Installation Guide
Sistema Operativo
Quick Installation Guide
Tamaño
1.1Mb
Nombre del archivo
dwl-8200ap_qig_100.pdf
Información
Installing the Hardware

Step 1
Connect one end of an Ethernet cable (included with your package) to the
LAN 1 (PoE) port on the DWL-8200AP, and the other end of the Ethernet cable
to the port labeled P+DATA OUT on the PoE base unit.
Step 2
Connect another Ethernet cable from the DATA IN port on the PoE base
unit to your router/switch or to a PC.
Step 3
Attach the power adapter to the connector labeled POWER IN on the PoE
base unit. Attach the power cord to the power adapter and into an electrical
outlet.

DWL-8200AP Install Guide
For 802.11a networks please do the
following:
Set Wireless LAN 802.11a Connection
By default the DWL-8200AP SSID is
set to default with a Channel setting
of 52.

For 802.11g networks please do the
following:
Set Wireless LAN 802.11g Connection
By default the DWL-8200AP SSID is
set to default with a Channel setting
of 6.

WEP Encryption for 802.11a
The DWL-8200AP is capable of three
levels of encryption: 64-bit, 128-bit,
and 152-bit (using only Hexadecimal).
By default, encryption is disabled.
You can change the encr yption
settings for more secure wireless
communication.

For 802.11a networks please do the
following:
Set Wireless LAN 802.11a Connection
By default the DWL-8200AP SSID is
set to default with a Channel setting
of 52.

WPA-Personal
Select WPA-Personal for an 802.11a
Network.

For 802.11a networks please do the
following:
WPA Encryption for 802.11a
Provide an alphanumeric PassPhrase
that is between 8 to 63 characters. By
default, the Group Key Update Interval
is set to 1800 seconds (30 minutes).
After 1800 seconds have passed, the
key will change again.

For 802.11g networks please do the
following:
Set Wireless LAN 802.11g Connection
By default the DWL-8200AP SSID is
set to default with a Channel setting
of 6.

Security level options for an 802.11a network are as follows:
? No Security - continue to page 7
? WEP - continue to page 8
? WPA-Personal - continue to page 10
Compañía
D-Link
Dispositivo
Tarjetas de Red
Modelo
D-Link DWL-8200AP Revision A3
Descripción
802.11a/g Enterprise Access Point with PoE and Management MIB file for firmware
Sistema Operativo
Software
Versión Firmware
2.10
Tamaño
19Kb
Nombre del archivo
dwl-8200ap_mib_v210-rc394.zip
Compañía
D-Link
Dispositivo
Tarjetas de Red
Modelo
D-Link DWL-8200AP Revision A3
Descripción
802.11a/g Enterprise Access Point with PoE and Management D-View module for firmware
Sistema Operativo
Software
Versión Firmware
2.10
Tamaño
2.8Mb
Nombre del archivo
dwl-8200ap_dview_module_fv210-rc354.zip
Compañía
D-Link
Dispositivo
Tarjetas de Red
Modelo
D-Link DWL-8200AP Revision A3
Descripción
802.11a/g Enterprise Access Point with PoE and Management AP Manager Software
Sistema Operativo
Software
Versión Driver
1.00
Tamaño
1.9Mb
Nombre del archivo
dwl8200ap_apmgr_100.exe
Compañía
D-Link
Dispositivo
Tarjetas de Red
Modelo
D-Link DWL-8200AP Revision A3
Descripción
802.11a/g Enterprise Access Point with PoE and Management D-View 51/HP Openview module
Sistema Operativo
Software
Versión Driver
1.00
Tamaño
2.7Mb
Nombre del archivo
dwl8200ap_d-v-module_100.exe
Disponibles 12 archivos para DWL-8200AP Revision A3
HelpDrivers Desde Marzo del 2000