D-Link DWL-2000AP+ Revision Ax Descargar Drivers, Manuales y Firmware

Compañía
D-Link
Dispositivo
Tarjetas de Red
Modelo
D-Link DWL-2000AP+ Revision Ax
Descripción
802.11g High-Speed Wireless Access Point Firmware
Sistema Operativo
Firmware
Versión Firmware
113
Tamaño
482Kb
Nombre del archivo
dwl-2000ap+_fw_v1.13.zip
Compañía
D-Link
Dispositivo
Tarjetas de Red
Modelo
D-Link DWL-2000AP+ Revision Ax
Descripción
802.11g High-Speed Wireless Access Point Manual
Sistema Operativo
Manual
Tamaño
6Mb
Nombre del archivo
dwl-2000ap+_man.pdf
Información
Package Contents................................................................................ 3
Introduction........................................................................................... 4
Wireless Basics ................................................................................... 8
Getting Started ................................................................................... 12
Using the ConfigurationMenu............................................................. 14
Networking Basics ............................................................................. 25
Troubleshooting.................................................................................. 40
Technical Specifications ..................................................................... 47
Contacting Technical Support ............................................................. 50
Warranty and Registration ................................................................... 51

Contents of Package:
D-Link AirPlusXTREME G+ DWL-2000AP+
High-Speed 2.4GHz Wireless Access Point
Power Adapter-DC 5V, 2.5A
Manual andWarranty on CD
Quick InstallationGuide
Ethernet Cable
If any of the above items are missing, please contact your reseller.
Note: Using a power supply with a different voltage rating than the one included with the
DWL-2000AP will cause damage and void the warranty for this product.

System Requirements for Configuration:
Computers with Windows, Macintosh, or Linux-based
operating systems with an installed Ethernet adapter
Internet Explorer Version 6.0 or Netscape Navigator
Version 6.0 and Above

Introduction
The D-Link AirPlusXtreme G+ DWL-2000AP+ High-Speed Wireless Access Point is a
802.11g high-performance, wireless access point that supports high-speed wireless
networking at home, at work or in public places.
The DWL-2000AP+ is capable of operating in one of 4 different modes to meet your
wireless networking needs. TheDWL-2000AP+ can operate as anAccess Point; inAccess
Point-to-Access Point Bridging mode; Access Point-to-Multipoint Bridging mode; or
Wireless Client mode.
The DWL-2000AP+ is an ideal solution for quickly creating and extending a wireless
local area network (WLAN) in offices or other workplaces, trade shows and special
events.
* Available Q4 2003 as a free download
Unlike most access points, the DWL-2000AP+ provides data transfers at up to 8X
(compared to the standard 11 Mbps) when used with other D-Link AirPlusXtremeG+
products. The 802.11g standard is backwards compatible with 802.11b products. This
means that you do not need to change your entire network to maintain connectivity. You
may sacrifice some of 802.11g’s speed when you mix 802.11b and 802.11g devices, but
you will not lose the ability to communicate when you incorporate the 802.11g standard
into your 802.11b network. You may choose to slowly change your network by gradually
replacing the 802.11b devices with 802.11g devices .
Compañía
D-Link
Dispositivo
Tarjetas de Red
Modelo
D-Link DWL-2000AP+ Revision Ax
Descripción
802.11g High-Speed Wireless Access Point Diagram
Sistema Operativo
Manual
Tamaño
654Kb
Nombre del archivo
dwl-2000applus.pdf
Información
802.11g High-Speed Wireless Access Point
Real Throughput 10X Faster
The AirPlusG+TM DWL-2000AP+ is an enhanced high-performance 802.11g wireless Access Point for use indoors. This device
supports wireless networking speeds of up to 54Mbps, while providing seamless interoperability with all existing 802.11b and
802.11b+ wireless equipment. With high data transfer rates, better security and built-in bridge function, this device is the ideal
wireless solution that offers an upgrade to a fast, new technology while protecting your past investments through interoperability
with your current network equipment.
Up to 54Mbps Speed on 2.4GHz Frequency Band
Real Throughput 10 Times Faster Than 802.11b
Wireless LAN
Compatible With 802.11b and 802.11b+
Providing transmission speeds of up to 54Mbps, the
DWL-2000AP+ compares favorably with 802.11b devices
that offer 11Mbps speed, and with 802.11b+ equipment that
gives 22Mbps transmission. This enhanced speed and
adoption of 2.4GHz frequency, now available for public
use in most countries, plus the mobility and convenience
inherent in a wireless LAN, make this device an ideal
solution for bandwidth intensive WLAN applications.
Apart from the higher theoretical network data transfer
speed of 54Mbps for 802.11g against the 11Mbps for
802.11b, the DWL-2000AP+ also delivers a much faster
data transmission than other wireless LAN devices. In a
typical working environment with multiple users accessing
the network at the same time, the DWL-2000AP+ operates
at 10 times the speed of the normal 802.11b wireless LAN
equipment, which is made possible by means of a turbo
engine firmware inside this AP.
802.11g's compatibility with existing wireless LAN
standards means that you do not need to change your entire
network to maintain connectivity. The DWL-2000AP+ can
transmit data at up to 54Mbps when used with D-Link
AirPlusXtremeG+TM and other 802.11g products.
Built-in Bridge Functions
Easy Migration to Higher Bandwidth
Embedded DHCP Server
The DWL-2000AP+ can be configured to operate in any one
of the 4 modes: (1) as a wireless access point (AP), (2) a
point to point wireless bridge, (3) a point to multi point
wireless bridge, or (4) a wireless client. With these built-in
functions, the DWL-2000AP+ gives you the flexibility to
configure the device to meet your environment's
requirements.
By maintaining compatibility with your existing wireless
network equipment, the DWL-2000AP+ lets you upgrade to
a higher speed at the pace you want. The DWL-2000AP+
and other 802.11g standard devices can be gradually added to
your network, while the rest of your older network remains
perfectly connected.
The DWL-2000AP+ includes an embedded DHCP server
that, once enabled, will automatically assign IP addresses to
wireless clients. This unique feature makes the
DWL-2000AP+ an ideal solution for quickly creating and
extending a wireless local area network (WLAN) in offices
or other workplaces, and at trade shows and other special
events.
Compañía
D-Link
Dispositivo
Tarjetas de Red
Modelo
D-Link DWL-2000AP+ Revision Ax
Descripción
802.11g High-Speed Wireless Access Point Datasheet
Sistema Operativo
Manual
Tamaño
190Kb
Nombre del archivo
dwl-2000applus.pdf
Compañía
D-Link
Dispositivo
Tarjetas de Red
Modelo
D-Link DWL-2000AP+ Revision Ax
Descripción
802.11g High-Speed Wireless Access Point Quick Installation Guide
Sistema Operativo
Quick Installation Guide
Tamaño
4.7Mb
Nombre del archivo
dwl-2000ap+_qig.pdf
Información
Connecting the DWL-2000AP+ Wireless
Access Point to Your Network

A. First, connect the power adapter to the receptor at the back panel of the
DWL-2000AP+ and then plug the other end of the power adapter to a wall outlet
or power strip. The Power LED will turn ON to indicate proper operation.
B. Insert one end of the cable to the Ethernet port on the back panel of the
DWL-2000AP+ and the other end of the cable to an Ethernet Broadband Router
(i.e., D-Link DI-604) or Switch (i.e., D-Link DSS-5+). Note: You also have the option
of connecting the DWL-2000AP+ directly to the computer that will be used for
configuration. The Link LED light will illuminate to indicate a proper Ethernet
connection. (Note: The Ethernet Port on the DWL-2000AP+ is Auto-MDI/MDIX.
Meaning you can use a straight-through or crossover-Ethernet cable to connect to
the Ethernet port on the DWL-2000AP+.)
C. The DWL-G650+ AirPlus XtremeG+Wireless Cardbus Adapter and theDWL-G520+
AirPlus Xtreme G+ Wireless PCI Adapter will connect, out of the box , with the
DWL-2000AP+, using their default wireless settings. Computers with 802.11b
wireless adapters can also connect to the DWL-2000AP+.

Using the Setup Wizard
Step 1 - Set up your new
password. You have the option
to establish a password.
Step 2 - Wireless Setup
The default wireless
settings are:
SSID = default
Channel = 6
You can change these
settings to match an
existing wireless network.
Step 3 - Encryption
TheDWL-2000AP+ is
capable of three levels of
wireless encryption - 64-bit,
128-bit and 256-bit. By
default the encryption is
disabled. You can change
the encryption settings for
more secure wireless
communication.
For additional settings or information, refer to the Advanced, Tools, or Status
tabs on the web-management interface; or to the manual located on the CD-ROM.

Appendix
Assigning a Static IP Address in Windows
To assign a Static IP Address to the laptop or computer that you are using to configure
the DWL-2000AP+, please do the following:

Go to Start > Double- click on Control
Panel > Double-click on Network
Connections > Right-click on Local
Area Connections > Click Properties
Disponibles 5 archivos para DWL-2000AP+ Revision Ax
HelpDrivers Desde Marzo del 2000