D-Link DP-301U Revision A1 Descargar Drivers, Manuales y Firmware

Compañía
D-Link
Dispositivo
Tarjetas de Red
Modelo
D-Link DP-301U Revision A1
Descripción
Multi-Protocol Print Server with Single USB Port Firmware for only
Sistema Operativo
Firmware
Versión Firmware
1.20
Tamaño
196Kb
Nombre del archivo
dp301u_ax_fw_1.20.zip
Compañía
D-Link
Dispositivo
Tarjetas de Red
Modelo
D-Link DP-301U Revision A1
Descripción
Multi-Protocol Print Server with Single USB Port PS-Admin Manual
Sistema Operativo
Manual
Tamaño
1.7Mb
Nombre del archivo
dp-xxx_psadmin_manual.pdf
Información
ABOUT THIS GUIDE................................................................. 1
What’s Not Covered in This User’s Guide.................................................. 1
Contents of the User’s Guide ..................................................................... 2
INTRODUCTION ....................................................................... 3
Background on Print Servers ..................................................................... 3
D-Link Print Server Administration Features............................................. 6
INSTALLING AND STARTING THE PS ADMIN PROGRAM............... 8
System Requirements ................................................................................. 8
Installing PS Admin ................................................................................... 9
Starting PS Admin ................................................................................... 11
GETTING STARTED SETTING UP YOUR PRINT SERVER............. 13
Choosing a Name for Your Print Server................................................... 13
Setting a Password for Your Print Server ................................................. 15
Changing Print Server Port Settings ........................................................ 17
Testing Your Print Server......................................................................... 20
SETTING UP NOVELL NETWARE 3.X PRINTING ........................ 22
Introduction to Novell NetWare Printing ................................................. 22
Print Server Setup Procedure................................................................... 26
Remote Printer Setup Procedure.............................................................. 28
Compañía
D-Link
Dispositivo
Tarjetas de Red
Modelo
D-Link DP-301U Revision A1
Descripción
Multi-Protocol Print Server with Single USB Port LPR for Win 9x/Me Manual
Sistema Operativo
Manual
Tamaño
268Kb
Nombre del archivo
dp-xxx_lpr_manual_w9x_me.pdf
Información
Setting up Windows 95 TCP/IP Printing
The D-Link network print server can provide print services to TCP/IP
networks using the lpr/lpd network printing protocol. Most UNIX
systems are capable of supporting lpd, as is Windows NT.
D-Link’s LPR for TCP/IP Printing client gives Windows 95
workstations the ability to print using the lpr/lpd printing protocol.
Though it is possible to print to D-Link network print servers from
Windows 95, this capability is useful if primarily administer your
network from UNIX systems, or if you want to print from workstations
that are only accessible through IP routing.

Installing the LPR for TCP/IP Printing Client
Before your Windows 95 workstation can print using the lpr protocol,
you will need to install the D-Link client program, as follows:
1. Make sure that you have installed the TCP/IP protocol, and have
properly configured the Windows 95 TCP/IP settings. You can
install the protocol from the Network control panel if necessary.
2. From the Start menu, choose the Settings submenu, then the
Control Panel item within it. Windows will display the Control
Panel folder.
3. Double-click on the Network icon in the Control Panel folder.
4. Click on the Add... button on the Configuration tab.
5. Windows will ask for the type of component to add. Select
Client and click Add... to continue.
6. When Windows asks you to select a network client, click the
Have Disk... button.
7. Insert the LPR client diskette in your computer’s floppy drive (A:
or B:), enter the proper pathname, and click OK.
8. Select the LPR for TCP/IP Printing client and click OK.
9. Windows will copy the necessary files, and return to the
Network dialog. Click OK to let Windows restart.

Adding LPR Printer Ports
Once you have installed the client, and have enabled TCP/IP printing
for the D-Link network print servers, then you need to add a printer
port for each printer you will be printing to using the lpr/lpd
protocol. To add a printer port,
1. From the Start menu, choose the Settings submenu, then the
Control Panel item within it. Windows will display the Control
Panel folder.
2. Double-click on the Network icon in the Control Panel folder.
3. Choose the LPR for TCP/IP Printing client and click the
Properties button.
Compañía
D-Link
Dispositivo
Tarjetas de Red
Modelo
D-Link DP-301U Revision A1
Descripción
Multi-Protocol Print Server with Single USB Port Windows 2000 LPR Printing Guide
Sistema Operativo
Manual
Tamaño
1.2Mb
Nombre del archivo
dp-xxx_w2k_config.pdf
Información
How to Install D-Link Print Server in the Microsoft Windows 2000 TCP/IP
environment
To create a TCP/IP remote printer Microsoft TCP/IP printing support must be installed. The
procedure is as follows.
1. To start the Add Printer Wizard, select Settings - Printers from the Start menu and doubleclick
on the Add Printer icon.
2. The Wizard asks you to select between Local printer and Network printer. Select Local printer
(Disable Automatically detect my printer), as the DP-100/101/300/301/301P emulates a local
printer port. Click Next>.
3. The Wizard asks you to select between Use the following port and Create a new port. Select
Create a new port. Then Select Standard TCP/IP port and click Next>.
4. From the Add Standard TCP/IP Printer Port dialog, enter the IP address of your print server
and define a logical port name. Click Next>.
5. The Wizard asks you to select between Standard and Custom. Select Custom and click
Setting.
6. From the Configure Standard TCP/IP Port dialog, select LPR and enter the port name of your
print server you wish to use in the Queue Name field. Click OK.
7. Choose an appropriate print driver for your printer.
8. Enter an appropriate name for your printer.
9. Choose whether you wish to share the printer with other network users and enter an
appropriate name.
10. Choose Yes to confirm whether the printer is installed properly.
11. You have successfully added a new printer. Click Finish.
Compañía
D-Link
Dispositivo
Tarjetas de Red
Modelo
D-Link DP-301U Revision A1
Descripción
Multi-Protocol Print Server with Single USB Port Windows XP LPR Printing Guide
Sistema Operativo
Manual
Tamaño
1.3Mb
Nombre del archivo
dp-xxx_xp_config.pdf
Información
How to Install D-Link Print Server in the Microsoft Windows XP
TCP/IP environment
To create a TCP/IP remote printer Microsoft TCP/IP printing support must be installed. The
procedure is as follows.
1. To start the Add Printer Wizard, Go into Startà Go into Control Panelà Printers and
Faxes. Click on Add a printer.
2. The ‘Add printer wizard’ should then come up. Click Next.
3. Select ‘Local printer attached to this computer’ and untick ‘Automatically detect and
install my Plug n Play printer’ as the printer will not be plugged in directly to the PC.
Click Next.
Copyright D-Link Europe Technical Support
All trademarks acknowledged
Page 3
4. The wizard will then ask you to Select a Printer Port. Select ‘Create a new port’. Select
Standard TCP/IP Port. Click Next.
5. The ‘Add Standard TCP/IP Printer Port Wizard’ should then come up. Click Next.
6. Specify the IP address of the print server. An arbitrary ‘Port name’ will be generated by
default and this is based on the IP address specified. Please use different names if you
are installing multiple ports for the print server like the DP-100/300. This is because
Windows XP will only allow a unique ‘Port Name’. You can use something like i.e.
192.168.0.10_P1, 192.168.0.10_P2, etc. Click Next.
7. The wizard will then ask for Additional Port Information. Select Custom and then click on
Settings.
8. The ‘Configure Standard TCP/IP Port Monitor’ will then come up. Under protocol, select
LPR. In the ‘LPR Settings’ section, set the ‘Queue Name’ to the name of the port
registered on the print server. The name shown in the example below is using the
default format for port 1 (i.e. PS-616E64-P1). Click OK.
9. The wizard will then confirm the details of the new TCP/IP Printer Port. Click on Finish to
complete the wizard.
10. The ‘Add printer Wizard’ will then start the installation of the Printer drivers. Please
follow this wizard through and install the drivers for your printer accordingly.
11. The wizard will then ask for the name of your printer. Enter the appropriate name for
your printer.
12. Choose whether you wish to share the printer with other network users and enter an
appropriate name.
Copyright D-Link Europe Technical Support
All trademarks acknowledged
Page 8
13. The wizard will then ask for the ‘Location and Comment’ for the printer. Put in the
appropriate details for the printer.
14. The wizard will then ask if you would like to print a test page. Select ‘Yes’ to confirm it
is printing correctly. Once done, click Next.
15. The wizard will confirm that you have successfully installed the printer. Click Finish to
complete the installation.
Compañía
D-Link
Dispositivo
Tarjetas de Red
Modelo
D-Link DP-301U Revision A1
Descripción
Multi-Protocol Print Server with Single USB Port Manual
Sistema Operativo
Manual
Tamaño
4.3Mb
Nombre del archivo
dp-301u_man_v100.pdf
Información
Package Contents ................................................................................3
Introduction............................................................................................4
Setting up the DP-301U ........................................................................7
Getting Started ......................................................................................9
Using the Web Configuration ...............................................................10
TCP/IP Printing for Windows XP........................................................17
TCP/IP Printing for Windows 2000.....................................................25
TCP/IP Printing for Windows 98SE/Me ..............................................34
Unix/Linux Printing (See PS Admin Manual on CD-ROM)..................45
Setting up AppleTalk or LPR Printing in MAC OSX ..............................46
Setting up AppleTalk Printing in MAC OS9 ..........................................51
Networking Basics ..............................................................................54
Technical Specifications ......................................................................66
Contacting Technical Support ..............................................................67
Warranty and Registration ...................................................................68
Appendix: DP-301U Printer Compatibility List ....................................71
Compañía
D-Link
Dispositivo
Tarjetas de Red
Modelo
D-Link DP-301U Revision A1
Descripción
Multi-Protocol Print Server with Single USB Port Datasheet
Sistema Operativo
Manual
Tamaño
232Kb
Nombre del archivo
dp-301u.pdf
Información
Single-Port USB Print Server
DP-301U
Print Server

The DP-301U print server provides a single USB 1.1 port for connection to a USB-supported printer. This device lets you easily
share your USB printer with a group of users at home or in the office over a 10Mbps Ethernet or 100Mbps Fast Ethernet
network. Supporting multiple network operating systems, this device brings a high level of flexibility and performance to your
printing needs.
Flexible Installation
Multiple Network OS Support
The DP-301U is ideal for both the large office and the small
workgroup. For homes and SOHO with just one printer to
share, this print server offers a single port and saves you the
cost. For the large office with many computer users and
several printers scattered at different places, you can plug one
print server to each of these printers to share them on the
network.
The DP-301U supports as many network OS, including
Windows 95, 98, ME, NT 4.0, XP, Apple MacOS with
AppleTalk, Linux, Solaris, SCO Unix and NetWare 5.x native
NDS. This allows you toflexibly install the print server,
regardless of your network environment.
10/100Mbps LAN Port
Easy Setup
Connection to your network is through a 10/100Mbps Fast
Ethernet port, which automatically detects the speed of your
network and auto-negotiates to use the highest speed available.
Setup the print server is easy with a Windows-based menudriven
program, which guides you through all the necessary
steps to set up and configure your network printer. SNMP and
latest MIB-II MIBs are also built into the print server,
allowing you to manage this device on any SNMP standardbased
network.
Compañía
D-Link
Dispositivo
Tarjetas de Red
Modelo
D-Link DP-301U Revision A1
Descripción
Multi-Protocol Print Server with Single USB Port DP-GXXX Printer Compatibility List v2.00
Sistema Operativo
Manual
Tamaño
13Kb
Nombre del archivo
dp-3xxx_dp-g3xxx_usb_ltp_printer_list.pdf
Información
For DP-300U, DP-301P+, DP-301U, DP-311U, DP-G310,
and DP-G321
Parallel Port Printer List
Canon
· BJC-255SP
· BJC-330
· BJC-600
· BJC-620
· BJC-720
· BJC-740
· BJC-2000SP
· BJC-4100
· BJC-4300
· BJC-4500
· BJC-4550
· BJC-6000
· BJC-6500
· BJC-7000
· BJC-8200
· Bubble Jet S520
Epson
· Stylus 5700
· Stylus 5700L
· Stylus 5800
· Stylus C60
· Stylus EPL-5500
· Stylus EPL-N2000
· Stylus EPL-N2010
· Stylus LQ-100
· Stylus LQ-300
· Stylus LQ-550
· Stylus LQ-570+
· Stylus LQ-1070C+
· Stylus LQ-2070
· Stylus LQ-2170C
Compañía
D-Link
Dispositivo
Tarjetas de Red
Modelo
D-Link DP-301U Revision A1
Descripción
Multi-Protocol Print Server with Single USB Port Quick Installation Guide
Sistema Operativo
Quick Installation Guide
Tamaño
1Mb
Nombre del archivo
dp-301u_b1_qig_v2-00.pdf
Información
Connecting The DP-301U To Your
Network
First, insert one end of a straight-through CAT5 Ethernet RJ-45 cable into the “Network Port” (shown below.) Connect the other end of the cable to the LAN port of the gateway or switch.
Note: Do not connect the power cord to the DP-301U until you are advised to do so
Warning! Only a USB printer may be connected to the USB port of the DP-301U. Do not connect any other USB device to the USB port; to do so may damage the unit, voiding the warranty for this product.
Next, make sure that the Printer is turned OFF.
Using the USB cable, connect one end of the cable to the USB port of the DP-301U (shown below) and the other end to the USB port of the printer.
Turn ON the printer.
Then, plug one end of the power adapter into the DP-301U and the other end into your electric outlet.
The DP-301U will turn on and begin a self-test.

Setting up your DP-301U for network printing in Windows XP
For additional Windows operating system setup or information on the web-management interface, refer to the manual located on the CD-ROM.
The factory default IP address of the DP-301U is 192.168.0.10. In order to print to the printer(s) through the DP-301U, the DP-301U must have the same IP network settings as your network. IP address can be assigned manually or automatically by DHCP, BOOTP or RARP. To access the print server’s web configuration, manually assign an IP address on one of the PC’s on your network to the same subnet as the print server.
Go to Start > right click on My Network Places > select Properties > Double-click on the Network Connection associated with your Network Adapter.
Input a static IP address in the same range as the print server.
The IP address of the DP-301U can be modified on the Network tab of the Web configuration menu.
The following instructions use the print server’s default IP address as an example. Make the appropriate changes if you have modified the DP-301Us IP address.
For Windows XP:
Go to Start>Printers and Faxes>Add a Printer or Go to Start>Control Panel> Printers and Faxes
Select “Create a new port.” At the pull-down menu, highlight “Standard TCP/IP Port.”
Type in the IP address of the print server. (i.e. 192.168.0.10)
The port name will automatically be filled in.
In this window, scroll down to find your printer. (If it is not listed, insert the driver CD or diskette that came with your printer.)
Click on “Have Disk.”
Then, scroll down and highlight the printer.
At this screen, you can input a name for this printer.
Compañía
D-Link
Dispositivo
Tarjetas de Red
Modelo
D-Link DP-301U Revision A1
Descripción
Multi-Protocol Print Server with Single USB Port PS-Admin Software
Sistema Operativo
Software
Versión Driver
3.00
Tamaño
1.7Mb
Nombre del archivo
dp-xxx_sw_ps-admin_v3.00.zip
Compañía
D-Link
Dispositivo
Tarjetas de Red
Modelo
D-Link DP-301U Revision A1
Descripción
Multi-Protocol Print Server with Single USB Port LPR Software
Sistema Operativo
Windows 95-98-98Se-Me
Versión Driver
1.00
Tamaño
95Kb
Nombre del archivo
dp-xxx_sw_lpr_for_w9x_me.zip
Disponibles 11 archivos para DP-301U Revision A1
HelpDrivers Desde Marzo del 2000