Buffalo WLI-CB-G300N Wireless-N Nfiniti Notebook Adapter Descargar Drivers, Utilidades y Manuales

Compañía
Buffalo
Dispositivo
Tarjetas de Red
Modelo
Buffalo WLI-CB-G300N Wireless-N Nfiniti Notebook Adapter
Descripción
User manual
Sistema Operativo
Manual
Tamaño
1.8Mb
Nombre del archivo
@wli-cb-g300n-manual.pdf
Información
Connecting Wireless Clients to your Network
Buffalo supports 3 different methods for connecting your wireless device network.
Buffalo Client Manager - Install Buffalo’s Client Manager software to survey and connect to any supported wireless networks. Client Manager allows for detailed profiles to be configured for each connection. Please see page 7 for Client Manager installation instructions.
AOSS - Buffalo’s push button wireless setup technology allows for one touch wireless connection setup (including security) with any compatible AOSS Wireless Router or AP. This requires installing Client Manager. Please see page 7 for Client Manager installation instructions. After installation, please see page 10 for AOSS setup.
Windows XP Wireless Zero Config - Windows XP’s built in wireless configuration utility. This requires no additional software installation but doesn’t offer detailed profiles or AOSS. NOTE: Zero Config is only available on Windows XP. Please see page 20 for Zero Config instructions.

Client Manager
Client Manager can be used to survey and connect to available access points, configure WPA/WEP encryption, and create connection profiles.
Note: Client Manager does not function properly if the Windows XP Wireless Zero Configuration Service is enabled. When Client Manager is installed, Windows XP Wireless Zero Configuration is automatically disabled.
Installing Client Manager
Insert the AirNavigator CD into the CD-ROM drive of you computer. If the Air Navigator Setup Wizard does not launch automatically, launch it manually by clicking Start and then Run. Enter D:\Setup.exe in the dialog box that appears.
Click OK. Select Install Wireless Client Manager.
• Once the Client Manager Installer launches, click Next.
• Press Agree to accept the license agreement and continue installation.
• Click OK when Client Manager installation is complete.
• Press Exit Setup to exit AirNavigator.
• Client Manager is now installed and running. Right-click on its icon (the black antenna) to use it.

Using AOSS
AOSS (AirStation One-Touch Secure System) is a simple, one-touch setup for connecting wireless clients to an access point while enforcing the most secure possible connection encryption type. Users no longer need to worry about choosing the proper security protocols, IP addresses, or SSID. AOSS determines the optimal connection and configures itself in seconds. If your router doesn’t support AOSS, turn to page 6 to configure your connection manually with Client Manager or Wireless Zero Config.
The AOSS button for this wireless client is in its Client Manager software. Start Client Manager by right clicking on the black antenna icon in your System Tray, or by launching the Client Manager from your Start Menu: Programs >> Buffalo >>AirStation Utility >> Client Manager.
• From the Status Screen, select the Profiles tab.
• Initiate AOSS by pressing the AOSS button on the Access Point. Hold it down until the AOSS LED begins to flash.
• Now, click the blue AOSS button on the Client Manager’s screen. The AOSS wizard will appear.
Once AOSS is complete (about 30 seconds), the connection is archived as a profile for later use. To minimize Client Manager to the system tray, click the ‘X’ in the top right corner.
Notes:
AOSS will scan for an AOSS partner for about two minutes. If it times out before finding one, just press the AOSS buttons again.
Output power is reduced to 25% of normal during AOSS for security reasons. If you’re having trouble making an AOSS connection, temporarily move the devices closer together.
AOSS will automatically use the highest level of security available for all currently connected wireless devices.
If you have trouble connecting with AOSS, temorarily disable all personal firewalls on your PC, such as ZoneAlarm or Microsoft Personal Firewall. These programs may be re-enabled after AOSS has finished.
Compañía
Buffalo
Dispositivo
Tarjetas de Red
Modelo
Buffalo WLI-CB-G300N Wireless-N Nfiniti Notebook Adapter
Descripción
Quick Setup Guide
Sistema Operativo
Manual
Tamaño
1Mb
Nombre del archivo
@wli-cb-g300n-eu_qsg.pdf
Información
Installing Client Manager
The User Manual on the AirNavigator CD-ROM specifies three different ways of connecting your product to a wireless network. Please consult the User Manual for additional information.
Buffalo Client Manager - Install Buffalo’s Client Manager software to survey and connect to any supported wireless networks. In addition, it allows for one touch setup and configuration via AOSS.
• To install Client Manager, press the Install Client Manager button and follow the wizard through the setup. Once completed, Client Manager will be running and will be accessible from your system tray by double clicking on its icon.

Using Client Manager to Connect to Your Wireless Network
If your router/AP supports AOSS, you can set up your wireless network by pushing two buttons. Turn to the next page.
Alternatively, you can set up your wireless connections manually:
• Click the Scan tab in Client Manager. It will show you a list of available networks.
• Choose the network you want to connect to and clikc Connect.
• If the chosen wireless network is encrypted, select the Encryption Method, enter one or more encryption keys, and click Connect. connect to and click Connect.
Note: If you only have one encryption key, enter it in the first (#1) field.

Using AOSS to Connect to Your Network
AOSS (AirStation One-Touch Secure System) is a simple way to connect wireless clients to a wireless router or access point while enforcing the most secure encryption possible. Users no longer need to worry about choosing the proper security protocols, IP addresses, or SSID. AOSS determines the optimal connection and configures itself in seconds. Once AOSS has been setup, your other devices will need to be connected to the wireless network by performing AOSS or by manually adding the device to the wireless network. Please consult the user manual that came with your AOSS Wireless Router or Access Point to retrieve the necessary connection information.
The AOSS button for the WLI-CB-G300N is in its Client Manager software, which you installed on page 6. Start Client Manager by right clicking on the black antenna icon in your System Tray, or by launching the Client Manager from your Start Menu: Programs >> Buffalo >>AirStation Utility >> Client Manager.

Using AOSS
• From the Status Screen, select the Profiles tab.
• Click the blue AOSS button on the Client Manager’s screen. The AOSS wizard will appear.
• Hold down the AOSS button on your router/AP for a few seconds or until the AOSS LED begins to flash.
Once AOSS is complete (about 30 seconds), the connection is archived as a profile for later use. To minimize Client Manager to the system tray, click the ‘X’ in the top right corner.
Notes:
AOSS will scan for an AOSS partner for about two minutes. If it times out before finding one, just press the AOSS buttons again.
Output power is reduced to 25% of normal during AOSS for security reasons. If you’re having trouble making an AOSS connection, temporarily move the devices closer together.
AOSS will automatically use the highest level of security available for all currently connected wireless devices.
If you have trouble connecting with AOSS, temporarily disable all personal firewalls on your PC, such as ZoneAlarm or Microsoft Personal Firewall. These programs may be re-enabled after AOSS has finished.
Compañía
Buffalo
Dispositivo
Tarjetas de Red
Modelo
Buffalo WLI-CB-G300N Wireless-N Nfiniti Notebook Adapter
Descripción
Driver
Sistema Operativo
Windows 2000-XP
Tamaño
318Kb
Nombre del archivo
@cbg300n.zip
Compañía
Buffalo
Dispositivo
Tarjetas de Red
Modelo
Buffalo WLI-CB-G300N Wireless-N Nfiniti Notebook Adapter
Descripción
Utilities
Sistema Operativo
Windows 2000-XP
Versión Utilities
3.0
Tamaño
2.7Mb
Nombre del archivo
@clientmgr3.zip
Información
Client Manager 3 for wireless connections, works with Buffalo Adapters and Intel Centrino wireless adapters
Compañía
Buffalo
Dispositivo
Tarjetas de Red
Modelo
Buffalo WLI-CB-G300N Wireless-N Nfiniti Notebook Adapter
Descripción
CD Images ISO
Sistema Operativo
Windows 98Se-Me-2000-XP-2003-Vista
Versión Driver
9.22
Tamaño
201.2Mb
Nombre del archivo
@airnavi-922e.zip
Información
This README file describes release note of this CD and contained
driver version for your reference.

1. Known issue
When you uninstall the WLI-CB-G54/A driver, do not forget restart
Windows. Otherwise, driver re-installation must be failed.
* Refer to 5. How to uninstall the driver.

Notice for using WLI-PCM-L11/G/GP/WLI-USB-L11/G under Windows XP
When the WLI-PCM-L11, WLI-PCM-L11G, WLI-PCM-L11GP, WLI-USB-L11 or
WLI-USB-L11G is used under WindowsXP, disabling adapter from network
adapter properties might not work properly. In this case, please
disable the adapter from device manager.

For WLI-USB-KS11G user
Update USB adapter's firmware, when you use the driver that is contained
in this CD. Execute winupdate.exe in \USBKB11\Firmware\USBKS11G folder.

2. Update release note of AirNavigatorCD Ver9.11
Update Windows 2000/XP driver for WLI-CB-G300N.

3. Driver file version

WLI-CB-B11
RTL8180.SYS 5.170.709.2004

WLI-CB-G54/A/S
WLI-PCI-G54
WLI2-PCI-G54/S
WLI-CB-AMG54E
WLI-CB-G54HP
(Windows98SE/ME)
CBG54.SYS 3.94.41.2
(Windows2000/XP)
CBG54.SYS 3.104.64.52
(Windows Vista)
CBG54.SYS 4.102.15.62
Compañía
Buffalo
Dispositivo
Tarjetas de Red
Modelo
Buffalo WLI-CB-G300N Wireless-N Nfiniti Notebook Adapter
Descripción
CD Images ISO
Sistema Operativo
Windows 98Se-Me-2000-XP-2003-Vista
Versión Driver
9.1
Tamaño
193.5Mb
Nombre del archivo
@airnavigator_92.zip
Información
This README file describes release note of this CD and contained
driver version for your reference.

1. Known issue
When you uninstall the WLI-CB-G54/A driver, do not forget restart
Windows. Otherwise, driver re-installation must be failed.
* Refer to 5. How to uninstall the driver.

Notice for using WLI-PCM-L11/G/GP/WLI-USB-L11/G under Windows XP
When the WLI-PCM-L11, WLI-PCM-L11G, WLI-PCM-L11GP, WLI-USB-L11 or
WLI-USB-L11G is used under WindowsXP, disabling adapter from network
adapter properties might not work properly. In this case, please
disable the adapter from device manager.

For WLI-USB-KS11G user
Update USB adapter's firmware, when you use the driver that is contained
in this CD. Execute winupdate.exe in \USBKB11\Firmware\USBKS11G folder.

2. Update release note of AirNavigatorCD Ver9.11
Update Windows 2000/XP driver for WLI-CB-G300N.

3. Driver file version

WLI-CB-B11
RTL8180.SYS 5.170.709.2004

WLI-CB-G54/A/S
WLI-PCI-G54
WLI2-PCI-G54/S
WLI-CB-AMG54E
WLI-CB-G54HP
(Windows98SE/ME)
CBG54.SYS 3.94.41.2
(Windows2000/XP)
CBG54.SYS 3.104.64.52
(Windows Vista)
CBG54.SYS 4.102.15.62

WLI-CF-S11G
(Windows98/ME/2000/XP)
WLIS11.SYS 2.1.1.135
(WindowsCE)
WLIS11.SYS 1.07.29

WLI2-CF-S11
(Windows98/ME/2000/XP)
WLIS11.SYS 2.1.1.135
(WindowsCE)
WLIS11.SYS 1.07.29

WLI-PCM-L11
WLIL11.SYS 1.21.0.0
WLI11INS.DLL 1.20.0.0

WLI-PCM-L11GP
WL11GPCI.DLL 4.1.0.0
WLIL11.SYS 1.31.0.00
WLMEL41.SYS 7.64.8.308
WLMEL48.SYS 7.64.8.308

WLI-USB-L11G
(Windows98/ME)
WIMEL51.DLL 7.64.8.347
WLMEL51.SYS 7.64.8.347
(Windows2000/XP)
WIMEL51B.DLL 7.64.8.346
WLMEL51B.SYS 7.64.8.346
Disponibles 6 archivos para WLI-CB-G300N Wireless-N Nfiniti Notebook Adapter
HelpDrivers Desde Marzo del 2000