Accton EN2242A Descargar Drivers

Compañía
Accton
Dispositivo
Tarjetas de Red
Modelo
Accton EN2242A
Descripción
Fast Ethernet Adapter
Sistema Operativo
DOS-Windows 95-98-Me-NT-2000-XP-OS/2-Linux
Tamaño
501Kb
Nombre del archivo
en1207d.zip
Información
How to Config Your PCI adapter
==============================

1. Go to the PCI configuration item in BIOS setup.
2. Follow these steps to configure the PCI slot:
a). You should know which slot your adapter is plugged in to.
Look for the physical location of the slot in your PCI
motherboard.
b). Set the "this device" field to "Enable".
c). Set the "this item" field to "Master".
The EN1207D/EN2242A series PCI adapter MUST be installed in an
expansion slot that supports "Bus Master".
Refer to your system documentation to determine which slots
support Bus Mastering.
d). Some BIOS Setups allow you to select which interrupt line you
can use. In this case, select "INT A" for the "this item" field.
e). Select an IRQ of your choice; make sure it does not conflict
with existing IRQs in use.
d). Select the "Trigger method" by which the IRQ is assigned or
routed to the PCI slot. Choose the "level-trigger" option.
Multiple EN1207D/EN2242A series PCI adapters can share the same PCI
interrupt, but all must use INTA with level-trigger mode.

3. Run the diagnostic program found in the driver diskette under DOS.
If any problem arises during the installation, contact your dealer or
Accton Technology Corporation for support.

Conflict with Microsoft EMM386
==============================

The PCI adapters can only function with the EMM386.EXE memory manager
program version 4.49 or later. You can verify its version number by
entering EMM386 at the DOS Prompt.

Do not specify the "highscan" option with the EMM386.exe statement
in your config.sys file or your system will hang.

If you run MEMMAKER and select Custom Setup, do not specify
"Aggressively scan upper memory", or it will automatically insert
the HIGHSCAN flag into the EMM386 command line. This parameter cannot
be manually removed once it's installed, doing so will cause the
extended memory manager to malfunction.
Compañía
Accton
Dispositivo
Tarjetas de Red
Modelo
Accton EN2242A
Descripción
Drivers
Sistema Operativo
MS-Dos
Tamaño
501Kb
Nombre del archivo
en2242a.zip
Información
How to Config Your PCI adapter
==============================

1. Go to the PCI configuration item in BIOS setup.
2. Follow these steps to configure the PCI slot:
a). You should know which slot your adapter is plugged in to.
Look for the physical location of the slot in your PCI
motherboard.
b). Set the "this device" field to "Enable".
c). Set the "this item" field to "Master".
The EN1207D/EN2242A series PCI adapter MUST be installed in an
expansion slot that supports "Bus Master".
Refer to your system documentation to determine which slots
support Bus Mastering.
d). Some BIOS Setups allow you to select which interrupt line you
can use. In this case, select "INT A" for the "this item" field.
e). Select an IRQ of your choice; make sure it does not conflict
with existing IRQs in use.
d). Select the "Trigger method" by which the IRQ is assigned or
routed to the PCI slot. Choose the "level-trigger" option.
Multiple EN1207D/EN2242A series PCI adapters can share the same PCI
interrupt, but all must use INTA with level-trigger mode.

3. Run the diagnostic program found in the driver diskette under DOS.
If any problem arises during the installation, contact your dealer or
Accton Technology Corporation for support.

Conflict with Microsoft EMM386
==============================

The PCI adapters can only function with the EMM386.EXE memory manager
program version 4.49 or later. You can verify its version number by
entering EMM386 at the DOS Prompt.

Do not specify the "highscan" option with the EMM386.exe statement
in your config.sys file or your system will hang.

If you run MEMMAKER and select Custom Setup, do not specify
"Aggressively scan upper memory", or it will automatically insert
the HIGHSCAN flag into the EMM386 command line. This parameter cannot
be manually removed once it's installed, doing so will cause the
extended memory manager to malfunction.
Compañía
Accton
Dispositivo
Tarjetas de Red
Modelo
Accton EN2242A
Descripción
Drivers
Sistema Operativo
Windows 2000
Tamaño
501Kb
Nombre del archivo
en2242a.zip
Información
How to Config Your PCI adapter
==============================

1. Go to the PCI configuration item in BIOS setup.
2. Follow these steps to configure the PCI slot:
a). You should know which slot your adapter is plugged in to.
Look for the physical location of the slot in your PCI
motherboard.
b). Set the "this device" field to "Enable".
c). Set the "this item" field to "Master".
The EN1207D/EN2242A series PCI adapter MUST be installed in an
expansion slot that supports "Bus Master".
Refer to your system documentation to determine which slots
support Bus Mastering.
d). Some BIOS Setups allow you to select which interrupt line you
can use. In this case, select "INT A" for the "this item" field.
e). Select an IRQ of your choice; make sure it does not conflict
with existing IRQs in use.
d). Select the "Trigger method" by which the IRQ is assigned or
routed to the PCI slot. Choose the "level-trigger" option.
Multiple EN1207D/EN2242A series PCI adapters can share the same PCI
interrupt, but all must use INTA with level-trigger mode.

3. Run the diagnostic program found in the driver diskette under DOS.
If any problem arises during the installation, contact your dealer or
Accton Technology Corporation for support.

Conflict with Microsoft EMM386
==============================

The PCI adapters can only function with the EMM386.EXE memory manager
program version 4.49 or later. You can verify its version number by
entering EMM386 at the DOS Prompt.

Do not specify the "highscan" option with the EMM386.exe statement
in your config.sys file or your system will hang.

If you run MEMMAKER and select Custom Setup, do not specify
"Aggressively scan upper memory", or it will automatically insert
the HIGHSCAN flag into the EMM386 command line. This parameter cannot
be manually removed once it's installed, doing so will cause the
extended memory manager to malfunction.
Compañía
Accton
Dispositivo
Tarjetas de Red
Modelo
Accton EN2242A
Descripción
Drivers
Sistema Operativo
Windows 95
Tamaño
501Kb
Nombre del archivo
en2242a.zip
Información
How to Config Your PCI adapter
==============================

1. Go to the PCI configuration item in BIOS setup.
2. Follow these steps to configure the PCI slot:
a). You should know which slot your adapter is plugged in to.
Look for the physical location of the slot in your PCI
motherboard.
b). Set the "this device" field to "Enable".
c). Set the "this item" field to "Master".
The EN1207D/EN2242A series PCI adapter MUST be installed in an
expansion slot that supports "Bus Master".
Refer to your system documentation to determine which slots
support Bus Mastering.
d). Some BIOS Setups allow you to select which interrupt line you
can use. In this case, select "INT A" for the "this item" field.
e). Select an IRQ of your choice; make sure it does not conflict
with existing IRQs in use.
d). Select the "Trigger method" by which the IRQ is assigned or
routed to the PCI slot. Choose the "level-trigger" option.
Multiple EN1207D/EN2242A series PCI adapters can share the same PCI
interrupt, but all must use INTA with level-trigger mode.

3. Run the diagnostic program found in the driver diskette under DOS.
If any problem arises during the installation, contact your dealer or
Accton Technology Corporation for support.

Conflict with Microsoft EMM386
==============================

The PCI adapters can only function with the EMM386.EXE memory manager
program version 4.49 or later. You can verify its version number by
entering EMM386 at the DOS Prompt.

Do not specify the "highscan" option with the EMM386.exe statement
in your config.sys file or your system will hang.

If you run MEMMAKER and select Custom Setup, do not specify
"Aggressively scan upper memory", or it will automatically insert
the HIGHSCAN flag into the EMM386 command line. This parameter cannot
be manually removed once it's installed, doing so will cause the
extended memory manager to malfunction.
Compañía
Accton
Dispositivo
Tarjetas de Red
Modelo
Accton EN2242A
Descripción
Drivers
Sistema Operativo
Windows 98
Tamaño
501Kb
Nombre del archivo
en2242a.zip
Información
How to Config Your PCI adapter
==============================

1. Go to the PCI configuration item in BIOS setup.
2. Follow these steps to configure the PCI slot:
a). You should know which slot your adapter is plugged in to.
Look for the physical location of the slot in your PCI
motherboard.
b). Set the "this device" field to "Enable".
c). Set the "this item" field to "Master".
The EN1207D/EN2242A series PCI adapter MUST be installed in an
expansion slot that supports "Bus Master".
Refer to your system documentation to determine which slots
support Bus Mastering.
d). Some BIOS Setups allow you to select which interrupt line you
can use. In this case, select "INT A" for the "this item" field.
e). Select an IRQ of your choice; make sure it does not conflict
with existing IRQs in use.
d). Select the "Trigger method" by which the IRQ is assigned or
routed to the PCI slot. Choose the "level-trigger" option.
Multiple EN1207D/EN2242A series PCI adapters can share the same PCI
interrupt, but all must use INTA with level-trigger mode.

3. Run the diagnostic program found in the driver diskette under DOS.
If any problem arises during the installation, contact your dealer or
Accton Technology Corporation for support.

Conflict with Microsoft EMM386
==============================

The PCI adapters can only function with the EMM386.EXE memory manager
program version 4.49 or later. You can verify its version number by
entering EMM386 at the DOS Prompt.

Do not specify the "highscan" option with the EMM386.exe statement
in your config.sys file or your system will hang.

If you run MEMMAKER and select Custom Setup, do not specify
"Aggressively scan upper memory", or it will automatically insert
the HIGHSCAN flag into the EMM386 command line. This parameter cannot
be manually removed once it's installed, doing so will cause the
extended memory manager to malfunction.
Compañía
Accton
Dispositivo
Tarjetas de Red
Modelo
Accton EN2242A
Descripción
Drivers
Sistema Operativo
Windows Me
Tamaño
501Kb
Nombre del archivo
en2242a.zip
Información
How to Config Your PCI adapter
==============================

1. Go to the PCI configuration item in BIOS setup.
2. Follow these steps to configure the PCI slot:
a). You should know which slot your adapter is plugged in to.
Look for the physical location of the slot in your PCI
motherboard.
b). Set the "this device" field to "Enable".
c). Set the "this item" field to "Master".
The EN1207D/EN2242A series PCI adapter MUST be installed in an
expansion slot that supports "Bus Master".
Refer to your system documentation to determine which slots
support Bus Mastering.
d). Some BIOS Setups allow you to select which interrupt line you
can use. In this case, select "INT A" for the "this item" field.
e). Select an IRQ of your choice; make sure it does not conflict
with existing IRQs in use.
d). Select the "Trigger method" by which the IRQ is assigned or
routed to the PCI slot. Choose the "level-trigger" option.
Multiple EN1207D/EN2242A series PCI adapters can share the same PCI
interrupt, but all must use INTA with level-trigger mode.

3. Run the diagnostic program found in the driver diskette under DOS.
If any problem arises during the installation, contact your dealer or
Accton Technology Corporation for support.

Conflict with Microsoft EMM386
==============================

The PCI adapters can only function with the EMM386.EXE memory manager
program version 4.49 or later. You can verify its version number by
entering EMM386 at the DOS Prompt.

Do not specify the "highscan" option with the EMM386.exe statement
in your config.sys file or your system will hang.

If you run MEMMAKER and select Custom Setup, do not specify
"Aggressively scan upper memory", or it will automatically insert
the HIGHSCAN flag into the EMM386 command line. This parameter cannot
be manually removed once it's installed, doing so will cause the
extended memory manager to malfunction.
Compañía
Accton
Dispositivo
Tarjetas de Red
Modelo
Accton EN2242A
Descripción
Drivers
Sistema Operativo
Windows NT
Tamaño
501Kb
Nombre del archivo
en2242a.zip
Información
How to Config Your PCI adapter
==============================

1. Go to the PCI configuration item in BIOS setup.
2. Follow these steps to configure the PCI slot:
a). You should know which slot your adapter is plugged in to.
Look for the physical location of the slot in your PCI
motherboard.
b). Set the "this device" field to "Enable".
c). Set the "this item" field to "Master".
The EN1207D/EN2242A series PCI adapter MUST be installed in an
expansion slot that supports "Bus Master".
Refer to your system documentation to determine which slots
support Bus Mastering.
d). Some BIOS Setups allow you to select which interrupt line you
can use. In this case, select "INT A" for the "this item" field.
e). Select an IRQ of your choice; make sure it does not conflict
with existing IRQs in use.
d). Select the "Trigger method" by which the IRQ is assigned or
routed to the PCI slot. Choose the "level-trigger" option.
Multiple EN1207D/EN2242A series PCI adapters can share the same PCI
interrupt, but all must use INTA with level-trigger mode.

3. Run the diagnostic program found in the driver diskette under DOS.
If any problem arises during the installation, contact your dealer or
Accton Technology Corporation for support.

Conflict with Microsoft EMM386
==============================

The PCI adapters can only function with the EMM386.EXE memory manager
program version 4.49 or later. You can verify its version number by
entering EMM386 at the DOS Prompt.

Do not specify the "highscan" option with the EMM386.exe statement
in your config.sys file or your system will hang.

If you run MEMMAKER and select Custom Setup, do not specify
"Aggressively scan upper memory", or it will automatically insert
the HIGHSCAN flag into the EMM386 command line. This parameter cannot
be manually removed once it's installed, doing so will cause the
extended memory manager to malfunction.
Compañía
Accton
Dispositivo
Tarjetas de Red
Modelo
Accton EN2242A
Descripción
Drivers
Sistema Operativo
Windows XP
Tamaño
501Kb
Nombre del archivo
en2242a.zip
Información
How to Config Your PCI adapter
==============================

1. Go to the PCI configuration item in BIOS setup.
2. Follow these steps to configure the PCI slot:
a). You should know which slot your adapter is plugged in to.
Look for the physical location of the slot in your PCI
motherboard.
b). Set the "this device" field to "Enable".
c). Set the "this item" field to "Master".
The EN1207D/EN2242A series PCI adapter MUST be installed in an
expansion slot that supports "Bus Master".
Refer to your system documentation to determine which slots
support Bus Mastering.
d). Some BIOS Setups allow you to select which interrupt line you
can use. In this case, select "INT A" for the "this item" field.
e). Select an IRQ of your choice; make sure it does not conflict
with existing IRQs in use.
d). Select the "Trigger method" by which the IRQ is assigned or
routed to the PCI slot. Choose the "level-trigger" option.
Multiple EN1207D/EN2242A series PCI adapters can share the same PCI
interrupt, but all must use INTA with level-trigger mode.

3. Run the diagnostic program found in the driver diskette under DOS.
If any problem arises during the installation, contact your dealer or
Accton Technology Corporation for support.

Conflict with Microsoft EMM386
==============================

The PCI adapters can only function with the EMM386.EXE memory manager
program version 4.49 or later. You can verify its version number by
entering EMM386 at the DOS Prompt.

Do not specify the "highscan" option with the EMM386.exe statement
in your config.sys file or your system will hang.

If you run MEMMAKER and select Custom Setup, do not specify
"Aggressively scan upper memory", or it will automatically insert
the HIGHSCAN flag into the EMM386 command line. This parameter cannot
be manually removed once it's installed, doing so will cause the
extended memory manager to malfunction.
Disponibles 8 archivos para EN2242A
HelpDrivers Desde Marzo del 2000