Biostar P4M800-M7A 1.0 Descarga Drivers, Utilidades, Manuales y BIOS

Compañía
Biostar
Dispositivo
Placas Bases (Motherboards)
Modelo
Biostar P4M800-M7A 1.0
Descripción
BIOS
Sistema Operativo
BIOS
Versión BIOS
2007-08-03
Taamaño
512Kb
Nombre del archivo
p4m8ma11.bsa
Fecha
2007-08-03
Información
Support resolution 1440x900
Compañía
Biostar
Dispositivo
Placas Bases (Motherboards)
Modelo
Biostar P4M800-M7A 1.0
Descripción
Manual
Sistema Operativo
Manual
Taamaño
1.5Mb
Nombre del archivo
p4m80-m7a_080820c_w_b.zip
Información
Table of Contents
ii
Chapter 1: Introduction ............................................................ 1
1.1 Features ............................................................... 1
1.2 Package List......................................................... 3
1.3 Layout: P4M800-M7A (Rev 1.0) ............................ 4
1.4 Components: P4M800-M7A (Rev 1.0) .................. 5
1.5 Layout: P4M800-M7A (Rev 7.0 & 8.0) ................... 6
1.6 Components: P4M800-M7A (Rev 7.0 & 8.0) ......... 7
Chapter 2: Hardware Installation........................................... 8
2.1 Central Processing Unit (CPU) ............................ 8
2.2 FAN Headers ........................................................ 9
2.3 Memory Module Installation .............................. 10
2.4 Connectors and Slots .........................................11
Chapter 3: Headers & Jumpers Setup................................. 12
3.1 How to Setup Jumpers ...................................... 12
3.2 Detail Settings.................................................... 12
Chapter 4: Useful Help ........................................................... 16
4.1 Award BIOS Beep Code ..................................... 16
4.2 Extra Information ............................................... 16
4.3 Troubleshooting................................................. 18
Chapter 5: WarpSpeeder™..................................................... 19
5.1 Introduction........................................................ 19
5.2 System Requirement ......................................... 19
5.3 Installation ......................................................... 20
5.4 How to use [WarpSpeeder™]............................. 21
Compañía
Biostar
Dispositivo
Placas Bases (Motherboards)
Modelo
Biostar P4M800-M7A 1.0
Descripción
Manual PDF
Sistema Operativo
Manual PDF
Taamaño
418Kb
Nombre del archivo
bios_update.pdf
Información
BIOS Update
BIOS Update is a convenient utility which allows you to update your motherboard BIOS
under Windows system.
Update BIOS
with a BIOS file
Clear CMOS function
(Only for AWARD BIOS)
Show current BIOS information
Save current BIOS
to a .bin file
AWARD BIOS AMI BIOS
Online Update function
(Only for AMI BIOS)

Once click on this button, the
saving dialog will show.
Choose the position to save file
and enter file name. (We
recommend that the file name
should be English/number and
no longer than 7 characters.)
Then click Save.
After the saving process, finish
dialog will show. Click on OK to
complete the BIOS Backup
procedure.

Before doing this, please download the proper BIOS file from the website.
For AWARD BIOS, update BIOS procedure
should be run with Clear CMOS function, so
please check on Clear CMOS first.
Then click Update BIOS button, a
dialog will show for asking you backup
current BIOS. Click Yes for BIOS
backup and refer to the Backup BIOS
procedure; or click No to skip this
procedure.
After the BIOS Backup procedure, the
open dialog will show for requesting the
BIOS file which is going to be updated.
Please choose the proper BIOS file for
updating, then click on Open.
The utility will update BIOS with the
proper BIOS file, and this process may
take minutes. Please do not open any
other applications during this process.
After the BIOS Update process, click
on OK to restart the system.
While the system boots up and the full screen logo shows, press
key to enter BIOS setup.
In the BIOS setup, use the Load Optimized Defaults function and then Save and
Exit Setup to exit BIOS setup. BIOS Update is completed.
(for AMI BIOS only)
Automatically download and update the latest BIOS via internet; make sure that
the computer is connected to the internet before using this function.
After clicking on the Online Update
button, the utility will search for the
latest BIOS from internet. If there is
a new BIOS version, the utility will
ask you to download it. Click Yes to
proceed.
If there is no other newer BIOS
version, the utility will also tell you that
your BIOS has been the latest version.
Download completes; the utility will
ask you to program (update) the
BIOS. Click Yes to proceed.
The programming procedure may take minutes, please do not make any
operation during the programming process.
After the updating process, the utility will
ask you to reboot the system. Click OK
to reboot.
While the system boots up and the full screen logo shows, press
key to enter BIOS setup.
In the BIOS setup, use the Load Optimized Defaults function and then Save and
Exit Setup to exit BIOS setup. Online Update is completed.
Compañía
Biostar
Dispositivo
Placas Bases (Motherboards)
Modelo
Biostar P4M800-M7A 1.0
Descripción
USB 2.0 Controller
Sistema Operativo
Windows 2000-XP 32bits
Versión Driver
0.9.0.5
Taamaño
318Kb
Nombre del archivo
setup.exe
Fecha
2009-03-06
Información
Summary:
- Gold Release Update for the Broadcom 5751, 5751m 7.5 Project.
- Added Windows 2000 cat file, and Windows NT driver.
- Added 5702, 5705, and 5788 bootcode.

Software Compatibility
======================

This release of software supports:
- Broadcom 5751 Gigabit Ethernet with A0, A1 step silicon

Contents of the CD
==================
*** Release Version Information Table ***

Product Version Previous Rel.

Windows Driver - WinNT 7.73 n/a
Windows Driver - Win2k 7.73* 7.73
Windows Driver - WinXP 7.73* 7.73*
DOS NDIS2 Driver 7.61 7.61
Linux Driver 7.2.24 7.2.24
Netware ODI32 Driver 7.57 7.57
Netware ODI16 Driver 7.61 7.61
DOS Diagnostics 7.27 7.27
PXE 7.5.14 7.5.14
Bootcode for 5702 3.37 n/a
Bootcode for 5705 3.18 n/a
Bootcode for 5751 3.23 3.23
Bootcode for 5751m 3.23 3.23
Bootcode for 5788 3.04 n/a
BACS 7.5.2 7.5.2
BMAPI 6.4.9 6.4.9
CABW32 6.1.3 6.1.3
User Guide 4.05.03 4.05.03
Compañía
Biostar
Dispositivo
Placas Bases (Motherboards)
Modelo
Biostar P4M800-M7A 1.0
Descripción
BIOS Utility
Sistema Operativo
Windows 2000-XP 32bits-XP 64bits-Vista 32bits-Vista 64bits-2003 32bits-2003 64bits-XP MCE
Versión Utilities
1.9.2.3
Taamaño
3.5Mb
Nombre del archivo
bios.zip
Fecha
2009-02-20
Información
BIOS Update is a convenient utility which allows you to update your motherboard BIOS
Compañía
Biostar
Dispositivo
Placas Bases (Motherboards)
Modelo
Biostar P4M800-M7A 1.0
Descripción
On-Board VGA
Sistema Operativo
Windows 2000-XP-2003 32bits
Versión Driver
6.14.10.0357
Taamaño
6.7Mb
Nombre del archivo
win2kxp.exe
Fecha
2007-12-05
Información
Installation instructions
-------------------------
1. These drivers must be installed by a user with Windows 2000/XP Administrator
privileges. Please consult your system administrator or Microsoft
Windows 2000/XP User's Manual for more information on Administrator
privileges.

2. Start Microsoft Windows 2000/XP.

3. From the Start menu, select Settings.

4. Select Control Panel.

5. Select System.

6. Select Device Manager.

7. Under Display adapters, select the name of the NVIDIA adapter you have
installed. If you do not see a Display adapters option, or if your NVIDIA
adapter is not listed, under Other Devices, select Video Controller (VGA
Compatible).

8. Select the Driver tab.

9. Select Update Driver.

10. Select Next.

11. Select Next.

12. Verify that "Specify a location" has a check mark next to it. If it does
not, click in the box next to "Specify a location" to place a check mark
in the box. Select Next.

13. Enter the path to the NVIDIA drivers in the "Copy manufacturer's files
from:" dialog. Select OK.

14. If you get a dialog box that states "A suitable driver for this device
is already installed.", click in the box next to "Install one of the
other drivers" to place a check mark in the box, then select Next.

Otherwise, select Next, then proceed to step 16.

15. Select the following driver from the list. NVIDIA RIVA TNT is used an
example; make sure to select your NVIDIA adapter from the list.

Description Provider Manufacturer Location
----------- -------- ------------ --------
NVIDIA RIVA TNT NVIDIA NVIDIA a:\nv4_disp.inf

Select Next.

16. Select Finish.

17. Select Close.

18. Windows 2000/XP will ask if you wish to restart the computer.
Compañía
Biostar
Dispositivo
Placas Bases (Motherboards)
Modelo
Biostar P4M800-M7A 1.0
Descripción
On-Board LAN
Sistema Operativo
Windows 2000-XP-2003 32bits
Versión Driver
3.67.0.452
Taamaño
509Kb
Nombre del archivo
xp32.zip
Fecha
2007-12-05
Información
This document shows you how to setup the driver in Windows operating system.

Contents of the Subdirectory:
=============================

FETND5AV.SYS The NDIS5 driver for Windows 98/98SE/ME.
FETND5BV.SYS The NDIS5 driver for Windows 2000/XP/SRV2003/Vista.
FETND4.SYS The NDIS4 driver for Windows 95OSR2.
FETND3.SYS The NDIS3 driver for Windows 95.
FETND.DOS The NDIS2 driver for Windows.
FETODI.COM The ODI driver for Windows.
FETNDIS.INF The installation information file.
WINNDI.DLL The Co-installer for Windows.
VUINS16.DLL The Un-installer for Windows.
VUINS32.DLL The Un-installer for Windows 2K/XP/SRV2003.
DIFXAPI.DLL The DIFx API for Vista.
WIN.TXT This file.

Installation:
=============

Before starting with the installation process, make sure that the adapter
is properly installed and configured.

1. Turn on the power of your PC on to boot from Windows operating system.
Windows will auto-detect your new adapter, and the "New Hardware Found"
dialogue box will appear. Select "Driver from disk provided by hardware
manufacturer" to install driver from the diskette that comes with your
LAN adapter.

2. Insert the driver diskette into your floppy drive, and specify the
path of the driver in the diskette(i.e. A:\) to copy the driver
files to your system.

3. When the driver installation is completed, restart Windows.
Note:

1. The NDIS2 and ODI drivers are only supported in Windows 95.

2. In Setup Option "Flow Control":
When setting to Hardware Default(Auto), the flow control setting is
according to the auto-negotiation result based on PHY hardware default
values. However, when setting to other values(Disable, Enable), driver
will just disable or enable flow control ability according to your setting.
Compañía
Biostar
Dispositivo
Placas Bases (Motherboards)
Modelo
Biostar P4M800-M7A 1.0
Descripción
On-Board VGA
Sistema Operativo
Windows 95-98-Me
Versión Driver
4.14.10.0063
Taamaño
7.7Mb
Nombre del archivo
win9xme.exe
Fecha
2007-12-05
Compañía
Biostar
Dispositivo
Placas Bases (Motherboards)
Modelo
Biostar P4M800-M7A 1.0
Descripción
On-Board Audio
Sistema Operativo
Windows 95-98-Me-2000-XP 32bits-XP 64bits
Versión Driver
5.10.00.6240
Taamaño
17.5Mb
Nombre del archivo
alc850_6240.exe
Fecha
2007-06-09
Información
Driver & Application Installation/Removal Procedure For Realtek AC'97 Codec:
=================================================================================

<<< For Win2000/WinME/WinXP (WDM driver)/Win98 Gold(First Edition)/Win98SE >>>

---------------------------------------
Setup Driver/Application at first time:
---------------------------------------

Step 1. Before installing the Realtek AC'97 Drivers & Applications, Press the
[Cancel] button if Windows detect the PCI Multimedia Audio device.

Step 2. Insert the "Realtek AC'97 Drivers & Applications" CD into the CD-ROM
drive and run the setup.exe program to finish the installation.

Step 3. Click on [Next/OK/Go] to continue the procedure. If the Windows popup
"Digital Signature Not Found" message, press [Yes] to continue the
installation.

Step 4. Finally, select to restart the system and press [Finish] to complete
the installation.

The system will reload the drivers and do some adjustments in the INF
file if so required.

----------------
Setup for Manual
----------------
1. Double-click the "System" icon to open the "System Properties" dialog from Control Panel .
2. Choose "Hardware" tab and click the "Device Manager" button .
3. Please right-click mouse on "MultiMedia Audio Controller" and choose the "Properties" menu item
to show the driver details.
4. Click the "Driver" tab and then click the "Update Driver..." button for update.
5. Please follow the instructions of the "Upgrade Device Driver Wizard".
6. Choose "Search for a suitable driver for my device" and click the "Next" button.
7. Please specify the driver location/source and then click the "Next" button in this case,
"Specify a location" has been chosen.
8. If "Specify driver location" is chosen, the Wizard will ask for the path where the driver is located.
9. Click the "Next" button to install Audio Driver on "Driver Files Search Results".
10. If the "Digital Signature Not Found" dialog is opened, click the "Yes" button to continue
the Installation.
11. After completing the above steps, the drier has been installed into the system.
Please click "Finish" button to complete the installation.

--------------------------
Update Driver/Application:
--------------------------

Step 1. Follow Step 2,3,4 described in [Setup at first time] above to complete
the procedure.

--------------------------
Remove Driver/Application:
--------------------------

Step 1. Go to Start\Settings\Control Panel.

Step 2. Select [Add/Remove Programs] icon.

Step 3. Select "Realtek AC'97 Audio" and press [Change/Remove]
button.

Step 4. Click on [Next/OK/Go] to finish the uninstallation.

Step 5. At the end of the procedure, select to restart the system and press
[Finish] to complete the uninstallation.
Compañía
Biostar
Dispositivo
Placas Bases (Motherboards)
Modelo
Biostar P4M800-M7A 1.0
Descripción
Chipset
Sistema Operativo
Windows 98-Me-2000-XP 32bits-XP 64bits-Vista 32bits-Vista 64bits-2003 32bits-2003 64bits
Versión Driver
V5.21A
Taamaño
12.7Mb
Nombre del archivo
via_hyperionpro_v521a.zip
Fecha
2009-03-06
Compañía
Biostar
Dispositivo
Placas Bases (Motherboards)
Modelo
Biostar P4M800-M7A 1.0
Descripción
Serial ATA RAID
Sistema Operativo
Windows 98-Me-2000-XP 32bits-XP 64bits-Vista 32bits-Vista 64bits-2003 32bits-2003 64bits
Versión Driver
5.1.6000.581
Taamaño
428Kb
Nombre del archivo
drvdisk.exe
Fecha
2009-03-06
Compañía
Biostar
Dispositivo
Placas Bases (Motherboards)
Modelo
Biostar P4M800-M7A 1.0
Descripción
On-Board LAN
Sistema Operativo
Windows Vista 32bits
Versión Driver
3.67.0.452
Taamaño
431Kb
Nombre del archivo
vista32.zip
Fecha
2007-12-05
Información
This document shows you how to setup the driver in Windows operating system.

Contents of the Subdirectory:
=============================

FETND5AV.SYS The NDIS5 driver for Windows 98/98SE/ME.
FETND5BV.SYS The NDIS5 driver for Windows 2000/XP/SRV2003/Vista.
FETND4.SYS The NDIS4 driver for Windows 95OSR2.
FETND3.SYS The NDIS3 driver for Windows 95.
FETND.DOS The NDIS2 driver for Windows.
FETODI.COM The ODI driver for Windows.
FETNDIS.INF The installation information file.
WINNDI.DLL The Co-installer for Windows.
VUINS16.DLL The Un-installer for Windows.
VUINS32.DLL The Un-installer for Windows 2K/XP/SRV2003.
DIFXAPI.DLL The DIFx API for Vista.
WIN.TXT This file.

Installation:
=============

Before starting with the installation process, make sure that the adapter
is properly installed and configured.

1. Turn on the power of your PC on to boot from Windows operating system.
Windows will auto-detect your new adapter, and the "New Hardware Found"
dialogue box will appear. Select "Driver from disk provided by hardware
manufacturer" to install driver from the diskette that comes with your
LAN adapter.

2. Insert the driver diskette into your floppy drive, and specify the
path of the driver in the diskette(i.e. A:\) to copy the driver
files to your system.

3. When the driver installation is completed, restart Windows.
Note:

1. The NDIS2 and ODI drivers are only supported in Windows 95.

2. In Setup Option "Flow Control":
When setting to Hardware Default(Auto), the flow control setting is
according to the auto-negotiation result based on PHY hardware default
values. However, when setting to other values(Disable, Enable), driver
will just disable or enable flow control ability according to your setting.
Compañía
Biostar
Dispositivo
Placas Bases (Motherboards)
Modelo
Biostar P4M800-M7A 1.0
Descripción
On-Board Audio
Sistema Operativo
Windows Vista 32bits-Vista 64bits
Versión Driver
6.0.1.6243
Taamaño
28.5Mb
Nombre del archivo
6243_vista_apo.exe
Fecha
2007-12-05
Compañía
Biostar
Dispositivo
Placas Bases (Motherboards)
Modelo
Biostar P4M800-M7A 1.0
Descripción
On-Board LAN
Sistema Operativo
Windows Vista 64bits
Versión Driver
3.67.0.452
Taamaño
480Kb
Nombre del archivo
vista64.zip
Fecha
2007-12-05
Información
Contents on the disk
====================
README TXT This readme file
x86\AHCIx86s INF Microsoft Windows storport setup file
x86\AHCIx86s SYS Microsoft Windows storport driver for x86 compatible platforms
x86\AHCIx86s CAT Microsoft Windows WHQL Certified catalog file (place holder)
x64\AHCIx64s INF Microsoft Windows storport setup file
x64\AHCIx64s SYS Microsoft Windows storport driver for x64 platforms
x64\AHCIx64s CAT Microsoft Windows WHQL Certified catalog file (place holder)

================
Software Version
================
Microsoft Windows storport driver 3.102.1540.25
Compañía
Biostar
Dispositivo
Placas Bases (Motherboards)
Modelo
Biostar P4M800-M7A 1.0
Descripción
On-Board LAN
Sistema Operativo
Windows XP 64bits-2003 64bits
Versión Driver
3.67.0.452
Taamaño
446Kb
Nombre del archivo
xp64.zip
Fecha
2007-12-05
Información
This document shows you how to setup the driver in Windows operating system.

Contents of the Subdirectory:
=============================


FET5A64B.SYS The NDIS5 driver for WinXP/Server2003 x64 Edition for AMD64.
FETNDA64.INF The installation information file.
VUINS64.DLL The Un-installer for WinXP/Server2003 x64 Edition for AMD64.
DIFXAPI.DLL The DIFx API for Windows Vista x64 Edition for AMD64.
WINX64.TXT This file.

Installation:
=============

Before starting with the installation process, make sure that the adapter
is properly installed and configured.

1. Turn on the power of your PC on to boot from Windows operating system.
Windows will auto-detect your new adapter, and the "New Hardware Found"
dialogue box will appear. Select "Driver from disk provided by hardware
manufacturer" to install driver from the diskette that comes with your
LAN adapter.

2. Insert the driver diskette into your floppy drive, and specify the
path of the driver in the diskette(i.e. A:\) to copy the driver
files to your system.
Note:

1. In Setup Option "Flow Control":
When setting to Hardware Default(Auto), the flow control setting is
according to the auto-negotiation result based on PHY hardware default
values. However, when setting to other values(Disable, Enable), driver
will just disable or enable flow control ability according to your setting.
Compañía
Biostar
Dispositivo
Placas Bases (Motherboards)
Modelo
Biostar P4M800-M7A 1.0
Descripción
On-Board VGA
Sistema Operativo
Windows XP 64bits-2003 64bits
Versión Driver
6.14.10.6003
Taamaño
5.9Mb
Nombre del archivo
winxp_64.exe
Fecha
2007-12-05
Disponibles 16 archivos para P4M800-M7A 1.0
HelpDrivers Desde Marzo del 2000