Digicom Palladio USB V.92 Descargar Drivers

Compañía
Digicom
Dispositivo
Fax Modem ISDN y ADSL
Modelo
Digicom Palladio USB V.92
Descripción
Drivers
Sistema Operativo
Windows 2000
Tamaño
412Kb
Nombre del archivo
palusbv92__2k_v2.zip
Información
Palladio USB V.92

Procedura di installazione Driver per Windows 2000
---------------------------------------

1) Avviate Windows 2000

2) Scaricate il file "Palladio USBV92 Win98.exe" nel Vostro PC.

3) Eseguite il file "Palladio USBV92 Win98.exe", il quale in automatico copierà
i driver del Palladio USB V.92 nella cartella C:\Digicom.

4) Windows inizierà la procedura "Installazione guidata nuovo hardware".

5) Premete "Avanti>" per procedere nell'installazione.

6) Selezinate "Cerca un driver adatto alla periferica..." e premete "Avanti>"

7) Nella finiestra "Individua file del driver" selezionate solo "Specificare un percorso"
e premete "Avanti>"

8) Premete "Sfoglia" e selezionate la cartella in cui sono stati scompattati i driver
(C:\Digicom), confermate con "OK" e "Avanti>".

9) Confermate con "Avanti>", "SI" e "Fine" le finestre successive per completare
l'installazione.
Compañía
Digicom
Dispositivo
Fax Modem ISDN y ADSL
Modelo
Digicom Palladio USB V.92
Descripción
Drivers
Sistema Operativo
Windows 98
Tamaño
622Kb
Nombre del archivo
palusbv92__98.zip
Compañía
Digicom
Dispositivo
Fax Modem ISDN y ADSL
Modelo
Digicom Palladio USB V.92
Descripción
Drivers
Sistema Operativo
Windows Me
Tamaño
412Kb
Nombre del archivo
palusbv92__me.zip
Información
Windows Me Driver installation procedure ---------------------------------------- MODEM PCMCIA/CARDBUS -------------------- 1. Start WindowsME. 2. Insert the PCMCIA card into the computer's slot, please pay attention to the "this side up" indicator. Windows should noe detect a new hardware. 3. In the "Add New Hardware Wizard" window select "Specify the location of the driver" and Click "Next". 4. Select "Serch for the best driver for your device. ", select "Specifify a location" and Click "Browse". Select the folder where you copied the driver you downloaded from digicom web site. 5. Click "OK", then "Next". 6. Click "Next", then "Finish". Attention: after having inserted the modem into the slot (point 2), it may happen that the system automatically associates a driver to the modem. In this case, in order to update the existing driver with a newer one do the following: 7. From the "Start" menu -> Settings -> Control Panel -> System. 8. Select "Device Manager". 9. Highlight the Modem and click "Properties". 10. Select Driver and click "Update Driver". 11. From here one go ahead like described at point (3). SERIAL MODEM AND INTERNAL ISA BUS MODEM --------------------------------------- After having performed the hardware nstallation do as follows: 1. Start WindowsME 2. Select from "Start" menù -> Settings -> Control Panel -> Modems
Compañía
Digicom
Dispositivo
Fax Modem ISDN y ADSL
Modelo
Digicom Palladio USB V.92
Descripción
Drivers
Sistema Operativo
Windows XP
Tamaño
572Kb
Nombre del archivo
palusbv92_en_xp_v301.zip
Información
Driver for WindowsXP - Installation Procedure
---------------
Palladio USB V.92
---------------

1) Extract the files in a folder on PC (eg. c:\digicom).

2) Plug the USB modem into an available USB port.

3) Automatically a new hardware will be detected.

4) Select "Install from a list or specific location", then click "Next".

5) Select "Don't Search, I will choose the driver to Install", then click "Next".

6) Scroll down and select "Universal Serial Bus Controller", then click "Next".

7) Click "Have Disk", then click "Browse" and locate the driver folder.

8) Select "Digicom Palladio USB V.92", then click "Next".

9) Click "Continue anyway" in "Hardware Installation" window.

10) The driver installation is over.
Disponibles 4 archivos para Palladio USB V.92
HelpDrivers Desde Marzo del 2000