Epson ActionPrinter 2250 Descarga Drivers

Compañía
Epson
Dispositivo
Impresoras y Plotters
Modelo
Epson ActionPrinter 2250
Descripción
Drivers
Sistema Operativo
Windows 3.1
Versión Driver
v1.0bEs
Taamaño
0.51Mb
Nombre del archivo
ep10759.exe
Información
A. Instructions for the EPSON Generic 9Pin With Euro Driver
B. How to install
C. General Notices

A. Instructions for the EPSON Generic 9Pin With Euro Driver
=============================================================

This printer driver supports printing with EPSON 9Pin single impact dot
matrix printers (SIDMs) using built-in fonts. In addition, the printer
driver also supports Euro Symbol printing.
The driver supports Euro Symbol printing with the FX-880 and later
models. To print Euro Symbols with the LX-300, FX-870, FX-1170, FX-2170,
and DFX-5000+ printers, please contact your local EPSON service center
for information on updating your printer's ROM.
If your printer is not among those listed above, then the built-in fonts
cannot print Euro Symbols.

B. How to install
==================
To install in Windows(R) 98 / Windows(R) 95 / Windows NT(R) 4.0
1. Double-click the "My Computer" icon.
2. Right click on the FD icon and select "open".
3. Double-click the "Setup.exe" icon.

To install in Windows(R) 3.1 / Windows NT(R) 3.50 / Windows NT(R) 3.51
1. From the File menu, select Run.
2. Type " A:\Setup.exe " and click OK.
(If the Floppy Disk drive you are using is not drive A, substitute the
correct letter.)

C. General Notices
===================
1. Setting the loading position
The driver automatically sets top and bottom margins as follows:
Manual Feed/ Cut Sheet Feeder : 4.2mm
Tractor (Continuous Paper) : 0mm
The driver does not support top and bottom margin adjustments. If you want
to change the printer margins, please do so with either the printer control
panel, or in your application. Please be sure not to print outside the
printable areas. Doing so may cause problems.

2. User-defined sizing
For Windows 3.1 users:
If using a user-defined size, set the page length in the printer's control panel
before printing.

For Windows NT(R) 3.50/Windows NT(R) 3.51 users:
If using a user-defined size, use the driver only with the Portrait orientation
as the Landscape setting affects the page length. To print in the Landscape
orientation, be sure to set the page length in the printer control panel before
you print.

3. Using the proportional size in built-in fonts
This printer driver supports printing with EPSON 9Pin single impact dot
matrix printers (SIDMs) using built-in fonts.
But the LX series printers cannot print the proportional size font.
Compañía
Epson
Dispositivo
Impresoras y Plotters
Modelo
Epson ActionPrinter 2250
Descripción
Drivers
Sistema Operativo
Windows 95-98-NT3.51-NT4
Versión Driver
v1.0bEs
Taamaño
0.54Mb
Nombre del archivo
epson10753.exe
Información
A. Instructions for the EPSON Generic 9Pin With Euro Driver
B. How to install
C. General Notices

A. Instructions for the EPSON Generic 9Pin With Euro Driver
=============================================================

This printer driver supports printing with EPSON 9Pin single impact dot
matrix printers (SIDMs) using built-in fonts. In addition, the printer
driver also supports Euro Symbol printing.
The driver supports Euro Symbol printing with the FX-880 and later
models. To print Euro Symbols with the LX-300, FX-870, FX-1170, FX-2170,
and DFX-5000+ printers, please contact your local EPSON service center
for information on updating your printer's ROM.
If your printer is not among those listed above, then the built-in fonts
cannot print Euro Symbols.

B. How to install
==================
To install in Windows(R) 98 / Windows(R) 95 / Windows NT(R) 4.0
1. Double-click the "My Computer" icon.
2. Right click on the FD icon and select "open".
3. Double-click the "Setup.exe" icon.

To install in Windows(R) 3.1 / Windows NT(R) 3.50 / Windows NT(R) 3.51
1. From the File menu, select Run.
2. Type " A:\Setup.exe " and click OK.
(If the Floppy Disk drive you are using is not drive A, substitute the
correct letter.)

C. General Notices
===================
1. Setting the loading position
The driver automatically sets top and bottom margins as follows:
Manual Feed/ Cut Sheet Feeder : 4.2mm
Tractor (Continuous Paper) : 0mm
The driver does not support top and bottom margin adjustments. If you want
to change the printer margins, please do so with either the printer control
panel, or in your application. Please be sure not to print outside the
printable areas. Doing so may cause problems.

2. User-defined sizing
For Windows 3.1 users:
If using a user-defined size, set the page length in the printer's control panel
before printing.

For Windows NT(R) 3.50/Windows NT(R) 3.51 users:
If using a user-defined size, use the driver only with the Portrait orientation
as the Landscape setting affects the page length. To print in the Landscape
orientation, be sure to set the page length in the printer control panel before
you print.

3. Using the proportional size in built-in fonts
This printer driver supports printing with EPSON 9Pin single impact dot
matrix printers (SIDMs) using built-in fonts.
But the LX series printers cannot print the proportional size font.
Disponibles 2 archivos para ActionPrinter 2250
HelpDrivers Desde Marzo del 2000