Sony DSC-T7 Descarga Manuales

2-591-815-14(1)
2005 Sony Corporation
Additional information on this product and answers to frequently asked questions can be found at our
Customer Support Website.
Printed in Japan
Printed on 100% recycled paper using VOC (Volatile
Organic Compound)-free vegetable oil based ink.
2591815140
Digital Still Camera
User’s Guide/
Troubleshooting
Operating Instructions
Before operating the unit, please read this manual and
“Read This First” (separate volume) thoroughly, and retain it for future reference.
Owner’s Record
The model and serial numbers are located on the bottom.
Record the serial number in the space provided below.
Refer to these numbers whenever you call upon your Sony dealer regarding this product.
Model No. DSC-T7
Serial No. ___________________________
DSC-T7
“Read This First” (separate volume)
Explains the set-up and basic operations for shooting/playback with your camera.
Enjoying the camera
Using the menu
Using the Setup screen
Using your computer
Printing still images
Connecting your camera to your TV
Troubleshooting
Others
Index2
To prevent fire or shock hazard, do not expose the unit to rain or moisture.
RECYCLING LITHIUM-ION BATTERIES
Lithium-Ion batteries are recyclable.
You can help preserve our environment by returning your used rechargeable batteries to the collection and recycling location nearest you.
For more information regarding recycling of rechargeable batteries, call toll free
1-800-822-8837, or visit http://www.rbrc.org/
Caution: Do not handle damaged or leaking
Lithium-Ion batteries.
If you have any questions about this product, you may call: Sony Customer Information Services Center
1-800-222-SONY (7669)
The number below is for the FCC related matters only.
Regulatory Information
Note:Model DSC-T7 is to be used with the Interface
Adaptor.
CAUTION
You are cautioned that any changes or modifications not expressly approved in this manual could void your authority to operate this equipment.
Note:This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:– Reorient or relocate the receiving antenna.
WARNING
For Customers in the U.S.A. and
Canada
For Customers in the U.S.A.
This symbol is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
This symbol is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.
Declaration of Conformity
Trade Name: SONY
Model No.: DSC-T7
Responsible Party: Sony Electronics Inc.
Address: 16450 W. Bernardo Dr,
San Diego, CA 92127U.S.A.
Telephone No.: 858-942-2230
This device complies with Part 15 of the FCC
Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.3
– Increase the separation between the equipment and receiver.
– Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
– Consult the dealer or an experienced radio/TV technician for help.
The supplied interface cable must be used with the equipment in order to comply with the limits for a digital device pursuant to Subpart B of Part 15 of
FCC Rules.
This product has been tested and found compliant with the limits set out in the EMC Directive for using connection cables shorter than 3 meters (9.8 feet).
Attention
The electromagnetic fields at the specific frequencies may influence the picture and sound of this camera.
Notice
If static electricity or electromagnetism causes data transfer to discontinue midway (fail), restart the application or disconnect and connect the communication cable (USB, etc.) again.
Disposal of Old Electrical & Electronic
Equipment (Applicable in the
European Union and other European countries with separate collection systems)
This symbol on the product or on its packaging indicates that this product shall not be treated as household waste. Instead it shall be handed over to the applicable collection point for the recycling of electrical and electronic equipment. By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment and human health, which could otherwise be caused by inappropriate waste handling of this product. The recycling of materials will help to conserve natural resources.
For more detailed information about recycling of this product, please contact your local Civic
Office, your household waste disposal service or the shop where you purchased the product.
Applicable Accessory: “Memory Stick Duo”
A moulded plug complying with BS 1363 is fitted to this equipment for your safety and convenience.
Should the fuse in the plug supplied need to be replaced, a fuse of the same rating as the supplied one and approved by ASTA or BSI to BS 1362,
(i.e., marked with an or mark) must be used.
If the plug supplied with this equipment has a detachable fuse cover, be sure to attach the fuse cover after you change the fuse. Never use the plug without the fuse cover. If you should lose the fuse cover, please contact your nearest Sony service station.
For the Customers in the U.S.A. and
Canada
THIS DEVICE COMPLIES WITH PART 15 OF
THE FCC RULES. OPERATION IS SUBJECT
TO THE FOLLOWING TWO CONDITIONS:(1) THIS DEVICE MAY NOT CAUSE
HARMFUL INTERFERENCE, AND
(2) THIS DEVICE MUST ACCEPT ANY
INTERFERENCE RECEIVED, INCLUDING
INTERFERENCE THAT MAY CAUSE
UNDESIRED OPERATION.
THIS CLASS B DIGITAL APPARATUS
COMPLIES WITH CANADIAN ICES-003.
For Customers in Europe
Notice for customers in the
United Kingdom
“Memory Stick”
N504
Notes on using your camera
Types of “Memory Stick” that can be used
The IC recording medium used by this camera is a “Memory Stick Duo”. There are two types of “Memory Stick”.
• “Memory Stick Duo”: you can use a “Memory
Stick Duo” with your camera.
• “Memory Stick”
• For details on “Memory Stick Duo”, see page 90.
When using a “Memory Stick Duo” with “Memory Stick” compatible equipment
You can use the “Memory Stick Duo” by inserting it into the Memory Stick Duo
Adaptor (supplied).
Memory Stick Duo Adaptor
Notes on the “InfoLITHIUM” battery pack
• Charge the supplied NP-FE1 battery pack before using the camera for the first time. (t step 1 in
“Read This First”)
• The battery pack can be charged even if it is not completely discharged. Also, even if the battery pack is not fully charged, you can use the partially charged capacity of the battery pack as is.
• If you do not intend to use the battery pack for a long time, use up the existing charge and remove it from your camera, then store it in a cool, dry place. This is to maintain the battery pack functions (page 92).
• For details on the usable battery pack, see page 92.
Carl Zeiss lens
This camera is equipped with a Carl Zeiss lens which is capable of reproducing sharp images with excellent contrast.
The lens for this camera has been produced under a quality assurance system certified by Carl Zeiss in accordance with the quality standards of Carl Zeiss in Germany.
No compensation for contents of the recording
• The contents of the recording cannot be compensated for if recording or playback is not possible due to a malfunction of your camera or recording media, etc.
Back up recommendation
• To avoid the potential risk of data loss, always copy (back up) data to other medium.
Notes on recording/playback
• This camera is neither dust-proof, nor splash-proof, nor water-proof. Read “Precautions”
(page 94) before operating the camera.
• Before you record one-time events, make a trial recording to make sure that the camera is working correctly.
• Be careful not to get the camera wet. Water entering the inside of the camera may cause malfunctions which in some cases may not be repairable.
• Do not aim the camera at the sun or other bright light. It may cause the malfunction of your camera.
• Do not use the camera near a location that generates strong radio waves or emits radiation.
The camera may not be able to record or play back properly.
• Using the camera in sandy or dusty locations may cause malfunctions.
• If moisture condensation occurs, remove it before using the camera (page 94).
• Do not shake or strike the camera. In addition to malfunctions and an inability to record images, this may render the recording medium unusable, or cause image data breakdown, damage or loss.5
• Clean the flash surface before use. The heat of flash emission may cause dirt on the flash surface to become discolored or to stick to the flash surface, resulting in insufficient light emission.
Notes on the LCD screen, LCD finder
(for models with an LCD finder) and lens
• The LCD screen and the LCD finder are manufactured using extremely high-precision technology so over 99.99% of the pixels are operational for effective use. However, there may be some tiny black points and/or bright points (white, red, blue, or green in color) that constantly appear on the LCD screen and the
LCD finder. These points are normal in the manufacturing process and do not affect the recording in any way.
• Exposing the LCD screen, the finder, or the lens to direct sunlight for long periods may cause malfunctions. Be careful when placing the camera near a window or outdoors.
• Do not press against the LCD screen. The screen may be discolored and that may cause a malfunction.
• Images may trail across on the LCD screen in a cold location. This is not a malfunction.
• Be careful not to bump the lens, and be careful not to apply force to it.
On image data compatibility
• This camera conforms with DCF (Design rule for Camera File system) universal standard established by JEITA (Japan Electronics and
Information Technology Industries
Association).
• Playback of images recorded with your camera on other equipment and playback of images recorded or edited with other equipment on your camera are not guaranteed.
Warning on copyright
Television programs, films, videotapes, and other materials may be copyrighted. Unauthorized recording of such materials may be contrary to the provisions of the copyright laws.
The pictures used in this manual
The photographs used as examples of pictures in this manual are reproduced images, and are not actual images shot using this camera.6
For full use of the digital still camera
Prepare the camera and shoot in auto adjustment mode
“Read This First” (separate volume)
1 Prepare the battery pack
2 Turn the camera on/set the clock
3 Insert a “Memory Stick Duo”
4 Select the image size for use
5 Shoot images easily (Auto adjustment mode)
Shoot still images (Scene Selection)
6 View/Delete images
Get more friendly with your camera This manual
• Shoot with your favorite settings (Program auto shooting) t page 24
• Enjoy various shooting/playback using the menu t page 26
• Change the default settings t page 44
Connect your camera to a PC or a printer This manual
• Copy your images to a computer and enjoy editing them in various ways t page 54
• Print images by connecting your camera directly to a printer
(PictBridge compliant printers only) t page 687
Table of contents
Notes on using your camera .......4
Basic techniques for better images .............10
Focus – Focusing on a subject successfully............ 10
Exposure – Adjusting the light intensity ......... 11
Color – On the effects of lighting....... 12
Quality – On “image quality” and “image size”........ 13
Identifying parts............14
Indicators on the screen............17
Changing the screen display .....21
Number of still images and recording time of movies ...........22
Battery life and number of images that can be recorded/viewed ............23
Using the mode switch .........24
Using menu items ..........26
Menu items ..........27
Shooting menu .............29
(Camera)
(EV)
9 (Focus)
(Metering Mode)
WB (White Bal)
ISO
(P.Quality)
Mode (REC Mode)
BRK (Bracket Step)
(Interval)
(Flash Level)
PFX (P.Effect)
(Saturation)
(Contrast)
(Sharpness)
(Setup)
Enjoying the camera
Using the menu
M8
Viewing menu ......... 37
(Folder)
- (Protect)
DPOF
(Print)
(Slide)
(Resize)
(Rotate)
(Divide)
(Setup)
Trimming
Using Setup items .......... 44
Camera 1 ........... 45
AF Mode
Digital Zoom
Date/Time
Red Eye Reduction
AF Illuminator
Auto Review
Camera 2 ........... 48
Enlarged Icon
Memory Stick Tool ......... 49
Format
Create REC. Folder
Change REC. Folder
Setup 1....... 51
LCD Backlight
Beep
Language
Initialize
Setup 2....... 52
File Number
USB Connect
Video Out
Clock Set
Using the Setup screen
1
2
1
29
Enjoying your Windows computer ..........54
Copying images to your computer ..........56
Viewing image files stored on a computer with your camera ............63
Using the supplied software ......64
Using your Macintosh computer ............66
How to print still images ............68
Printing images directly using a PictBridge compliant printer ...........69
Printing at a shop .........73
Viewing images on a TV screen ............75
Troubleshooting ............77
Warning indicators and messages .........87
On the “Memory Stick” .........90
On the “InfoLITHIUM” battery pack .............92
On the battery charger .........93
Precautions ............94
Specifications ..........96
Using your computer
Printing still images
Connecting your camera to your TV
Troubleshooting
Others
Index .........9810
Enjoying the camera
Basic techniques for better images
When you press the shutter button halfway down, the camera adjusts the focus automatically
(Auto Focus). Remember to press the shutter button only halfway down.
To shoot a still image difficult to focus on t [Focus] (page 30)
If the image looks blurred even after focusing, it may be because of camera shake. t See
“Hints for preventing blur” (below).
Focus
Focusing on a subject successfully
Press fully down straight away
Press halfway down, then Flashing,lit/beeps Press fully down
Hints for preventing blur
Hold the camera steadily, keeping your arms at your side. Also, you can stabilize the camera by leaning against a tree or a building beside you. Using a tripod, and using the flash in dark places are also recommended.
Focus Exposure Color Quality
This section describes the basics so you can enjoy your camera. It tells you how to use various camera functions such as the mode switch (page 24), the menus (page 26), and so on.
60min11
Enjoying the camera
You can create various images by adjusting the exposure and the ISO sensitivity. Exposure is the amount of light that the camera will receive when you release the shutter.
Exposure
Adjusting the light intensity
Overexposure
= too much light
Whitish image
The exposure is automatically set to the proper value in the auto adjustment mode.
However, you can adjust it manually using the functions below.
[EV]:Allows you to adjust the exposure that has been determined by the camera. t page 29
[Metering Mode]:Allows you to change the part of the subject to be measured to determine the exposure. t page 32
[Bracket Setup]:Records three images with the exposure value of each image slightly shifted. t page 35
Correct exposure
Underexposure
= too little light
Darker image
Shutter speed = Length of time the camera receives light
Aperture = Size of the opening allowing light to pass through
ISO = Recording sensitivity
Exposure:12
Adjusting the ISO sensitivity
ISO is unit of measurement (sensitivity), estimating how much light an image pickup device
(equivalent to photo films) receives. Even when the exposure is the same, images differ depending on the ISO sensitivity.
[ISO] adjusts the sensitivity t page 33
The apparent color of the subject is affected by the lighting conditions.
Example: The color of an image affected by light sources
The color tones are adjusted automatically in the auto adjustment mode.
However, you can adjust color tones manually with [White Bal] (page 32).
High ISO sensitivity
Records a bright image even when shooting in a dark location.
However, the image tends to become noisy.
Low ISO sensitivity
Records a smoother image.
However, the image may become darker.
Color
On the effects of lighting
Weather/lighting Daylight Cloudy Fluorescent Incandescent
Characteristics of light
White (standard) Bluish Blue-tinged Reddish13
Enjoying the camera
A digital image is made up of a collection of small dots called pixels.
If it contains a large number of pixels, the picture becomes large, it takes up more memory, and the image is displayed in fine detail. “Image size” is shown by the number of pixels.
Although you cannot see the differences on the screen of the camera, the fine detail and data processing time differ when the image is printed or displayed on a computer screen.
Description of the pixels and the image size
Selecting the image size for use (t step 4 in “Read This First”)
The default settings are marked with .
* Images are recorded in the same 3:2 aspect ratio as photograph printing paper or postcards, etc.
Selecting the image quality (compression ratio) in combination (page 33)
You can select the compression ratio when digital images are saved. When you select a high compression ratio, the image lacks the fineness of detail, but has a smaller file size.
Quality
On “image quality” and “image size”
1 Image size: 5M
2592 pixels×1944 pixels = 5,038,848 pixels
2 Image size: VGA(E-Mail)
640 pixels×480 pixels = 307,200 pixels
Pixel
Many (Fine image quality and large file size)
Example: Printing in up to A4 size
Few (Rough image quality but small file size)
Example: An attached image to be sent by e-mail
Image size Usage guidelines
5M (2592×1944) Larger
Smaller
For printing high density images in A4 or A5 size
3:2* (2592×1728)
3M (2048×1536)
1M (1280×960) For printing in postcard size
VGA(E-Mail)
(640×480)
For recording a large number of images
For attaching images to e-mail or creating home pages
2592
1944
480
640
Pixels14
Identifying parts
See the pages in parentheses for details of operation.
Camera
A Shutter button (t step 5 in “Read This
First”)
B Power lamp (t step 2 in “Read This
First”)
C Flash (t step 5 in “Read This First”)
D Self-timer lamp (t step 5 in “Read
This First”)/AF illuminator (47)
E For shooting: Zoom (W/T) lever
(t step 5 in “Read This First”)
For viewing: / (Playback zoom) lever/ (Index) lever (t step 6 in
“Read This First”)
F Flash charge lamp (orange) (t step 5 in “Read This First”)
G Microphone
H Lens
I Lens cover
A Mode switch (24)
B MENU button (26)
C Control button
Menu on: v/V/b/B/z (t step 2 in
“Read This First”)
M e n u o f f : // / ( t step 5 in
“Read This First”)
D LCD screen (21)
E (Image Size/Delete) button
(t step 4 and 6 in “Read This First”)
F (Display on/off) button (21)
G Speaker
H Power button (t step 2 in “Read
This First”)
I Battery eject lever
J Hook for neck strap (t “Read This
First”)
K Battery cover (t step 1 in “Read This
First”)
L Multi connector
M “Memory Stick Duo” cover (bottom)
(t step 3 in “Read This First”)
1
2
3
4
5
6
7
8
9
1
2
3
4
5
6
7
8
9qa
0qsqf qd qgqh15
Enjoying the camera
N “Memory Stick Duo” slot (bottom)
(t step 3 in “Read This First”)
O Access lamp (bottom) (t step 4 in
“Read This First”)
P Screw groove (bottom)
Interface Adaptor
Use the Interface Adaptor for a variety of connections.
Attaching the Interface Adaptor
Push the Interface Adaptor firmly into the camera until it clicks into place.
To detach the Interface Adaptor, hold down the eject button as you remove the Interface
Adaptor.
Q A/V OUT (MONO) jack (75)
R (USB) jack (58, 70)
S DC IN jack
For connecting an AC-LS5/AC-LS5K
AC Adaptor (not supplied).
Stand
The stand provides a stable resting place for the camera. If you use a tripod, attach it to the stand.
Attaching a tripod
1 Insert the camera in the stand as shown.
A Screw groove
B Locking screwqjqlqk
Eject button
2 To the multi connector
1 To DC IN jack
3 To wall outletv mark
Interface Adaptor
1
216
2 Make sure to match the locking screw with the screw groove on the camera, and then turn the locking screw to secure the stand to the camera.
C Locking screw
D Tripod screw hole
Attach the tripod here.
• See the operating instructions supplied with the tripod for the method of attaching the tripod.
• Use a tripod with a screw length of less than
5.5 mm (7/32 inch). Y ou will be unable to firmly secure the stand to tripods having longer screws, and may damage the stand.
• Be careful so that the tip of the tripod screw does not scratch the stand.
• Attach the tripod so that the camera is stable. If you shoot with the camera in an unstable condition, the camera may fall, resulting in damage or malfunction.
4
317
Enjoying the camera
Indicators on the screen
See the pages in parentheses for details of operation.
When shooting still images
When shooting movies
A
B
60min
1
2
3
4
5
C:32:00
101
+
[00:28:25] 00:00:00 STBY
STD
640
+2.0EV
60min
1
2
3
4
5
Display Indication
Battery remaining (t step
1 in “Read This First”)z AE/AF lock (t step 5 in
“Read This First”)
BRK Recording mode (24, 33)
White balance (32)
STBY
REC
Standby/Recording a movie
(t step 5 in “Read This
First”)
Camera mode (Scene
Selection) (t step 5 in
“Read This First”)
Camera mode (Program)
(24)
Flash mode (t step 5 in
“Read This First”)
Zoom scaling (t 45, step 5 in “Read This First”)
Red-eye reduction (46)
Sharpness (36)
5 Saturation (36)
6 Contrast (36)
AF illuminator (47)
Metering mode (32)
Picture effect (35)
Display Indication
Macro (t step 5 in “Read
This First”)
AF mode (45)
AF range finder frame indicator (30)
1.0m Focus preset distance (30)
60min
M
WB
SL
1.3
ON
S AF M AF18
C
D
E
Display Indication
Image size (t step 4 in
“Read This First”)
FINE STD Image quality (33)
Recording folder (49)
Remaining “Memory
Stick” capacity (22)
00:00:00
[00:28:05]
Recording time [maximum recordable time] (22)
1/30" Multi Burst interval (35)
400 Remaining number of recordable images (22)
Self-timer (t step 5 in
“Read This First”)
C:32:00 Self-diagnosis display (87)
Date/Time (46)
ISO number (33)
Display Indication
Vibration warning (10)
• Indicates vibration will prevent you from shooting clear images. Even if the vibration warning appears, you can still shoot images.
However, for better image stability, we recommend using a tripod. It is also helpful to use the flash for better lighting.
E Low battery warning (23)
+ Spot metering cross hair
(32)
AF range finder frame (30)
3:2
5M
3M 1M VGA
FINE
640
STD
640
160
101
Display Indication
Histogram (21, 29)
NR slow shutter
• If you select shutter speeds of 1/6 second or slower, the
NR slow shutter function activates automatically to reduce the picture noise and
“NR” appears.
125 Shutter speed
F3.5 Aperture value
+2.0EV EV level value (29)
(not displayed on the screen on the previous page)
Menu/Guide menu (26) DPOF19
Enjoying the camera
When playing back still images
When playing back movies
A
B
C
60min
C:32:00
101 VGA
1.3
M
101 12/12
+2.0EV
F3.5 500
VOLUME BACK/NEXT
1
2
3
4
5
60min
1
2
3
4
5
Display Indication
Battery remaining (t step
1 in “Read This First”)
Image size (t step 4 in
“Read This First”)
Recording mode (24, 33)
N Playback (t step 6 in
“Read This First”)
V olume (t step 6 in
“Read This First”)
- Protect (38)
Print order (DPOF) mark
(73)
Change folder (37)
Zoom scaling (t step 6 in
“Read This First”)
Step
12/16
Frame by frame playback
(33)
Display Indication
101-0012 Folder-file number (37)
Playback bar (t step 6 in
“Read This First”)
Display Indication
PictBridge connecting (70)
Recording folder (49)
Playback folder (37)
Remaining “Memory
Stick” capacity (22)
8/8 12/12 Image number/Number of images recorded in selected folder
C:32:00 Self-diagnosis display (87)
00:00:12 Counter (22)
60min
3:2
5M 3M
1M VGA
FINE
640
STD
640
160
M
1.3
101
10120
D
E
Display Indication
Do not disconnect the USB cable (71)
+2.0EV EV level value (29)
ISO number (33)
Metering mode (32)
Flash
White balance (32)
500 Shutter speed
F3.5 Aperture value
Playback image (t step 6 in “Read This First”)
Display Indication
Histogram (21, 29)
• appears when histogram display is disabled.
2005 1 1 Recording date/time of the playback image (46)
Menu/Guide menu (26)
BACK/
NEXT
Select images
VOLUME Adjust volume
WB
DPOF21
Enjoying the camera
Changing the screen display
Each time you press the (Display on/off) button, the display changes as follows.
• When you set the histogram display to on, image information is displayed during playback.
• The histogram does not appear:When shooting in the following situations
– The menu is displayed.
– Recording movies.
During playback in the following situations
– The menu is displayed.
– In index mode.
– You are using playback zoom.
– You are rotating still images.
– Playback of movies.
• A large difference in the histogram displayed when shooting and during playback may occur when:– The flash strobes.
– The shutter speed is slow or high.
• The histogram may not appear for images recorded using other cameras.
S AF
VGA
96
S AF
VGA
96
S AF
60min
60min
101
101
Histogram on
Indicators off
Indicators on
Histogram display
(page 29)22
Number of still images and recording time of movies
The tables show the approximate number of still images and the length of time for movies that can be recorded on a “Memory Stick Duo” formatted with this camera. The values may vary depending on the shooting conditions.
The number of still images (The image quality is [Fine] on the upper line and
[Standard] on the lower line.) (Images)
• The number of images listed is for when [Mode] is set to [Normal].
• The size of a single still image is 1M when [Mode] is set to [Multi Burst].
• When the number of remaining shootable images is greater than 9,999, the “>9999” indicator appears.
• You can resize the images later ([Resize], (page 40)).
The recording time of movies (hour : minute : second)
• Movies with the size set to [640(Fine)] can be only recorded on a “Memory Stick PRO Duo”.
• For image size and image quality, see page 13.
• When images recorded using earlier Sony models are played back on this camera, the display may differ from the actual image size.
Capacity
Size
32MB 64MB 128MB 256MB 512MB 1GB
5M 12 25 51 92 188 384
23 48 96 174 354 723
3 : 2 1 22 55 19 21 8 83 8 4
23 48 96 174 354 723
3M 20 41 82 148 302 617
37 74 149 264 537 1097
1M 50 101 202 357 726 1482
93 187 376 649 1320 2694
VGA(E-Mail) 196 394 790 1428 2904 5928
491 985 1975 3571 7261 14821
Capacity
Size
32MB 64MB 128MB 256MB 512MB 1GB
640(Fine) – – – 0:02:57 0:06:02 0:12:20
640(Standard) 0:01:27 0:02:56 0:05:54 0:10:42 0:21:47 0:44:27
160 0:22:42 0:45:39 1:31:33 2:51:21 5:47:05 11:44:2223
Enjoying the camera
Battery life and number of images that can be recorded/viewed
The tables show the approximate number of images that can be recorded/viewed and the battery life when you shoot images in
[Normal] mode with battery pack
(supplied) at full capacity and at an ambient temperature of 25°C (77°F). The numbers of images that can be recorded or viewed take into account changing the “Memory
Stick Duo” as necessary.
Note that the actual numbers may be less than those indicated depending on the conditions of use.
• The battery capacity decreases as the number of uses increases and also over time (page 92).
• The number of images that can be recorded/viewed and the battery life are decreased under the following conditions:– The surrounding temperature is low
– The flash is used
– The camera has been turned on and off many times
– The zoom is used frequently
– [LCD Backlight] is set to [Bright]
– [AF Mode] is set to [Monitor]
– The battery power is low
When shooting still images
• Shooting in the following situations:– (P.Quality) is set to [Fine]
– [AF Mode] is set to [Single]
– Shooting once every 30 seconds
– The zoom is switched alternately between the
W and T ends
– The flash strobes once every two times
– The power turns on and off once every ten times
• The measurement method is based on the CIPA standard.
(CIPA: Camera & Imaging Products
Association)
• Number of shooting image does not change depending on the image size.
When viewing still images
• Viewing single images in order at about three second intervals
When shooting movies
• Shooting movies continuously with an image size of [160]
No. of images
Battery life
(min.)
Approx. 150 Approx. 75
No. of images Battery life (min.)
Approx. 2600 Approx. 130
Battery life (min.)
Approx. 6024
Using the mode switch
Set the mode switch to the desired function.
Still image shooting modes: Auto: Auto adjustment mode
Allows easy shooting with the settings adjusted automatically. t step 5 in “Read
This First”
Program: Program auto shooting mode
Allows you to shoot with the exposure adjusted automatically (both the shutter speed and the aperture value). Also you can select various settings using the menu.
(For details on the functions available t page 27): Scene Selection mode
Allows you to shoot with preset settings according to the scene. t step 5 in
“Read This First”
Control button
Mode switch: Shooting moviest step 5 in “Read This First”: Playback/Editt step 6 in “Read This First”25
Enjoying the camera
Scene Selection
For details t step 5 in “Read This First”
For shooting an image appropriately according to the scene condition, a combination of functions is determined by the camera.
( : you can select the desired setting)
Macro Flash
AF range finder
Focus preset
Exposure bracket
White
Balance
Flash level
Burst/Multi
Burst
— / — — —
—— — —
—Auto/ —
—C e n t e r A F
0.5m/1.0m/
3.0m/7.0m
—— —
— /
/
/
/
—————
SL WB26
Using the menu
Using menu items
1 Turn on the power and set the mode switch.
Different items are available depending on the position of the mode switch and the (Camera) menu settings.
2 Press MENU to display the menu.
3 Select the desired menu item with b/B on the control button.
• If the desired item is invisible, keep pressing b/B until it appears on the screen.
• Press z after selecting an item when the mode switch is set to .
4 Select the setting with v/V.
The setting you select is zoomed and is set.
5 Press MENU to turn off the menu.
• If there is an item that is not displayed, an v/V mark appears on the edges of the location where menu items usually appear. To display an item that is not displayed, select the mark with the control button.
• You cannot select items that are grayed out.v/V/b/B buttonz button
Mode switch
Control button
MENU button
WB ISO
100
200
400
ISO
Auto
6427
For details on the operation t page 26
Using the menu
Menu items
The menu items available vary depending on the mode switch position. Only the available items are displayed on the screen.
( : available)
Mode switch position: Auto Program Scene
Menu for shooting (page 29)
(Camera) — —
(EV) — —
9 (Focus) — —
(Metering Mode) — —
WB (White Bal) — —
ISO — — —
(P.Quality) — — —
Mode (REC Mode) — —
BRK (Bracket Step) — * ——
(Interval) — * ——
(Flash Level) — * ——
PFX (P.Effect) — —
(Saturation) — — — —
(Contrast) — — — —
(Sharpness) — — — —
(Setup) —
M28
For details on the operation t page 26
* The operation is limited according to the Scene mode (page 25).
**Available only during enlarged playback.
Menu for viewing (page 37)
(Folder) — — — —
- (Protect) — — — —
D P O F ————
(Print) — — — —
(Slide) — — — —
(Resize) — — — —
(Rotate) — — — —
(Divide) — — — —
( S e t u p ) ——— —
Trimming** — — — —29
For details on the operation t page 26
Using the menu
Shooting menu
The default settings are marked with .
Select the still image camera mode. t step 5 in “Read This First”
Manually adjusts the exposure.
Toward – Toward +
• For details on the exposure t page 11
• The compensation value can be set in 1/3EV increments.
• If a subject is being shot in extremely bright or dark conditions, or the flash is used, the exposure adjustment may not be effective.z Adjusting [EV] by displaying a histogram
A histogram is a graph showing the brightness of an image. Set the mode switch to in advance, then press repeatedly to display the histogram. The graph display indicates a bright image when skewed to the right side, a dark image when skewed to the left side. A histogram can be used to check the exposure and adjust
[EV].
A Number of pixels
B Brightness
• The histogram also appears in the following cases, but you cannot adjust the exposure.
– When (Camera) is set to [Auto]
– When playing back a single image
– During Quick Review
(Camera)
(EV)
M +2.0EV Toward +: Brightens an image.
0EV The exposure is determined automatically by the camera.m –2.0EV Toward –: Darkens an image.
60min
Bright Dark
A
B30
For details on the operation t page 26
You can change the focus method. Use the menu when it is difficult to get the proper focus in auto focus mode.
• AF stands for Auto Focus.
• Distance setting information in [Focus] is approximate. If you point the lens up or down, the error increases.
• The distance selection is limited according to the Scene mode (page 25).
• When you are shooting movies, [Multi AF] is recommended as the AF works even with a certain amount of vibration.
9 (Focus)
(unlimited distance) Focuses on the subject using a previously set distance to the subject. (Focus preset)
• When shooting a subject through a net or through window glass, it is difficult to get the proper focus in auto focus mode. In these cases, use of [Focus] is convenient.
7.0m
3.0m
1.0m
0.5m
Spot AF ( ) Focuses automatically on an extremely small subject or a narrow area.
• This is useful when focusing on an extremely small subject or a narrow area. Use together with the AF lock function lets you shoot in the desired image composition. Take care to hold the camera steady so that the subject does not deviate from the range finder frame.
Center AF
()
Focuses automatically on a subject near the center of the frame.
• Using this with the AF lock function lets you shoot in the desired image composition.
Multi AF
(Multipoint AF)
(Still image )
(Movie )
Focuses automatically on a subject in all ranges of the finder frame.
• This mode is useful when the subject is not in the center of the frame.
VGAFINE
98 P
S AF
60min 101
AF range finder frame
AF range finder frame indicator
VGAFINE
98 P
S AF
60min 101
AF range finder frame
AF range finder frame indicator31
Using the menu
For details on the operation t page 26
• When you use [Digital Zoom] or [AF Illuminator], priority AF movement is given to subjects in or near the center of the frame. In this case the , or indicator flashes and the AF range finder frame is not displayed.
• Focus setting is not available depending on the Scene mode (page 25).z If the subject is out of focus
When shooting with the subject at the edge of the frame (or the screen), or when using [Center AF] or [Spot
AF], the camera may not focus on a subject at the edge of the frame. In a case like this, do as follows.
1 Recompose the shot so that the subject is centered in the AF range finder, and press the shutter button halfway down to focus on the subject (AF lock).
As long as you do not press the shutter button fully down, you can retry the procedure as many times as you want.
2 When the AE/AF lock indicator stops flashing and remains on, return to the fully composed shot, and press the shutter button fully down.
F2.8 30
VGA FINE
98 P
S AF
60min 101
AE/AF lock indicator
AF range finder frame
VGAFINE
98
S AF
P
F2.8 30
60min 10132
For details on the operation t page 26
Selects the metering mode that sets which part of the subject to measure to determine the exposure.
• For details on the exposure t page 11
• When using spot metering or center-weighted metering, setting [9] (Focus) to [Center AF] is recommended to focus on the metering position (page 30).
Adjusts the color tones according to the lighting condition in a situation, for example, when the colors of a image look strange.
• For details on [White Bal] t page 12
• Under fluorescent lights that flicker, the white balance function may not work correctly even though you select (Fluorescent).
• Except in [ ] modes, [WB] is set to [Auto] when the flash strobes.
• Some options are not available depending on the Scene mode (page 25).
(Metering Mode)
Spot (Spot metering)
()
Measures only a part of the subject.
• This function is useful when the subject is backlit or when there is strong contrast between the subject and the background.
Center (Center-weighted metering)( )
Measures the center of the image, and determines the exposure based on the brightness of the subject there.
Multi (Multi-pattern metering)
Divides into multiple regions and measures each region. The camera determines a well-balanced exposure.
WB (White Bal)
(Flash) Adjusts for the flash conditions.
• You cannot select this item when shooting movies.n (Incandescent) Adjusts for places where the lighting conditions change quickly such as a party hall, or under bright lighting such as photography studios.
(Fluorescent) Adjusts for fluorescent lighting.
(Cloudy) Adjusts for a cloudy sky.
(Daylight) Adjusts for outdoors, shooting night scenes, neon signs, fireworks, or sunrise, or conditions before and after sundown.
Auto Adjusts the White Balance automatically.
VGA
F2.8 250
98
FINE
SAF
P
60min 101
Spot metering cross hairs
Positions on the subject.
WB
WB33
Using the menu
For details on the operation t page 26
Selects a luminous sensitivity with units of ISO. The larger the number, the higher the sensitivity.
• For details on the [ISO] sensitivity t page 12
• Note that the image tends to become noisier as the ISO sensitivity number increases.
• [ISO] is set to [Auto] in the Scene mode.
Selects the still image quality.
• For details on the image quality t page 13
Selects whether the camera performs continuous shooting or not when you press the shutter button.
ISO
400 Select a large number when shooting in dark locations or shooting a subject moving at high speed, or select a small number to obtain high image quality.
200
100
64
Auto
(P .Quality)
Fine (FINE) Records with high quality (low compression).
Standard (STD) Records with standard quality (high compression).
Mode (REC Mode)
Multi Burst ( ) Records 16 frames in succession as a still image file when you press the shutter button.
• This is convenient for checking your form in sports, for example.
• You can select the Multi Burst shutter interval in [Interval] mode
(page 35).
Exp Brktg (BRK) Records a series of three images with the exposure values automatically shifted.
• You can select the image with the appropriate exposure after recording when you are unable to shoot good pictures depending on the brightness of the subject.
Burst ( ) Records the maximum number of images in succession (refer to the following table) when you press and hold down the shutter button.
• When “Recording” disappears, you can shoot the next image.
Normal Does not shoot continuously.
M34
For details on the operation t page 26
On the [Multi Burst]
• You can play back images shot with [Multi Burst] using the following procedure.
– To pause/resume: Press z on the control button.
– To play back frame-by-frame: Press b/B in pause mode. Press z to resume playback in series.
• You cannot use the following functions in the [Multi Burst] mode:– Smart zoom
–F l a s h
– Inserting the date and time
– Dividing a series of images shot with [Multi Burst]
– Deleting a frame in a series of images shot with [Multi Burst]
– Setting the frame interval to a mode other than [1/30] when (Camera) is set to [Auto]
• When playing back a series of images shot with [Multi Burst] using a computer or a camera not equipped with the Multi Burst function, the image is displayed as a single image with 16 frames.
• The image size of images shot in the [Multi Burst] mode is 1M.
• You may not be able to shoot images in the [Multi Burst] mode depending on the Scene mode (page 25).
On the [Exp Brktg]
• The flash is set to (No flash).
• The focus and white balance are adjusted for the first image, and these settings are also used for the other images.
• When the exposure is manually adjusted (page 29), the exposure is shifted based on the adjusted brightness.
• The recording interval is approximately 0.7 second.
• If the subject is too bright or too dark, you may be unable to shoot properly with the selected bracket adjustment value.
• You may not be able to shoot images in the [Exp Brktg] mode depending on the Scene mode (page 25).
On the [Burst]
• The flash is set to (No flash).
• When recording with the self timer, a series of a maximum of five images is recorded.
• When the battery level is low, or when the “Memory Stick Duo” is full, the [Burst] stops.
• You may not be able to shoot images in the [Burst] mode depending on the Scene mode (page 25).
The maximum number of continuous shots
(Units: images)
Quality
Size
Fine Standard
5M 9 15
3:2 9 15
3M 13 24
1M 32 59
VGA(E-Mail) 100 10035
Using the menu
For details on the operation t page 26
• BRK (Bracket Step) is not displayed in some Scene modes.
Selects the frame interval in the [Multi Burst] mode (page 33).
• (Interval) is not displayed in some Scene modes.
Adjusts the amount of flash light.
• To change flash mode t step 5 in “Read This First”
• (Flash Level) is not displayed in some Scene modes.
Allows you to shoot an image with special effects.
• This setting is not maintained when the power is turned off.
BRK (Bracket Step)
±1.0EV Shifts the exposure value by plus or minus 1.0EV .
±0.7EV Shifts the exposure value by plus or minus 0.7EV .
±0.3EV Shifts the exposure value by plus or minus 0.3EV .
(Interval)
1/7.5 (1/7.5") • This setting cannot be made when [Mode] (REC Mode) in the menu is set to other than [Multi Burst] (page 33).
1/15 (1/15")
1/30 (1/30")
(Flash Level)
+ ( +) Toward +: Makes the flash level higher.
Normal
– ( –) Toward –: Makes the flash level lower.
PFX (P.Effect)
B & W ( ) Records the image in monochrome (black and white).
Sepia ( ) Records the image in sepia (like an old photograph).
Off No effect.
M
M36
For details on the operation t page 26
Adjusts the saturation of the image.
Adjusts the contrast of the image.
Adjusts the sharpness of the image.
See page 44.
(Saturation)
+ ( ) Toward +: Brightens the color.
Normal
– ( ) Toward –: Darkens the color.
(Contrast)
+ ( ) Toward +: Enhances the contrast.
Normal
– ( ) Toward –: Reduces the contrast.
(Sharpness)
+ ( ) Toward +: Sharpens the image.
Normal
– ( ) Toward –:Softens the image.
(Setup)37
For details on the operation t page 26
Using the menu
Viewing menu
The default settings are marked with .
Selects the folder containing the image you want to play back.
1 Select the desired folder with b/B on the control button.
2 Select [OK] with v, then press z.z On the [Folder]
The camera stores images in a specified folder of a “Memory Stick Duo” (page 49). You can change the folder or create a new one.
• To create a new folder t [Create REC. Folder] (page 49)
• To change the folder for recording images t [Change REC. Folder] (page 50)
• When multiple folders are created in the “Memory Stick Duo” and the first or last image in the folder is displayed, the following indicators appear.: Moves to the previous folder.: Moves to the next folder.: Moves to either the previous and next folders.
(Folder)
OK See the following procedure.
Cancel Cancels the selection.
BACK/NEXT
Select Folder
Cancel
OK
Folder Name:102 2/2
Created:No. Of Files:2005
102MSDCF
9
111 : :05:34AM38
For details on the operation t page 26
Protects images against accidental erasure.
To protect images in single-image mode
1 Display the image you want to protect.
2 Press MENU to display the menu.
3 Select [-] (Protect) with b/B on the control button, then press z.
The image is protected and the - (protect) indicator appears on the image.
4 To protect other images, select the desired image with b/B, then press z.
To protect images in index mode
1 Press (index) to display the index screen.
2 Press MENU to display the menu.
3 Select [-] (Protect) with b/B on the control button, then press z.
4 Select [Select] with v/V, then press z.
5 Select the image you want to protect with v/V/b/B, then press z.
A green - indicator appears on the selected image.
6 Repeat step 5 to protect other images.
7 Press MENU.
8 Select [OK] with B, then press z.
The - indicator turns white. The selected images are protected.
• To protect all images in the folder, select [All In This Folder] in step 4, and press z. Select [On] with B,then press z.
- (Protect)
Protect (-) See the following procedure.
Exit Exits the Protection function.
VGA
2/9
Protect
Exit
BACK/NEXT
60min
101
-
TO NEXT MENU
• SELECT
- (green)39
Using the menu
For details on the operation t page 26
To cancel the protection
In single-image mode
Press z in step 3 or 4 of “To protect images in single-image mode.”
In index mode
1 Select the image for which you want to remove protection in step 5 of “To protect images in index mode.”
2 Press z to turn the - indicator gray.
3 Repeat the operation above for all images to be unprotected.
4 Press MENU, select [OK] with B, and then press z.
To cancel protection of all images in the folder
Select [All In This Folder] in step 4 of “To protect images in index mode,” and press z.
Select [Off] with B, then press z.
• Note that formatting the “Memory Stick Duo” erases all the data stored on it, even if images are protected, and these images cannot be recovered.
• It may take some time to protect an image.
Adds a (Print order) mark to images you want to print (page 73).
See page 69.
Plays back recorded images in order (Slide show).
Interval
DPOF
(Print)
(Slide)
3 sec Sets the slide show interval.
5 sec
10 sec
30 sec
1 min40
For details on the operation t page 26
Image
Repeat
1 Select [Interval], [Image] and [Repeat] with v/V/b/B on the control button.
2 Select [Start] with V/B, then press z.
The slide show starts.
To end the slide show, press z, select [Exit] with B, then press z.
• During a slide show, you can display the previous/next image with b/B.
• The [Interval] time is just a guideline, so it may vary depending on the image size, etc.
You can change the image size of a recorded image (Resize), and save it as a new file. The original image is retained even after resizing.
1 Display the image you want to resize.
2 Press MENU to display the menu.
3 Select [ ] (Resize) with b/B, then press z.
4 Select the desired size with v/V , then press z.
The resized image is recorded in the recording folder as the newest file.
• For details on [Image Size] t step 4 in “Read This First”
• You cannot change the size of movies or [Multi Burst] images.
• When you change from a small size to a large size, the image quality deteriorates.
• You cannot resize to an image size of 3:2.
• When you resize a 3:2 image, the upper and lower black portions will be displayed on the image.
Folder Plays back all images in the selected folder.
All Plays back all images stored on the “Memory Stick Duo”.
On Plays back images in a continuous loop.
Off After all the images have been played back, the slide show ends.
Start See the following procedure.
Cancel Cancels the slide show.
(Resize)
5M
3M The setting size is just a guideline.t step 4 in “Read This First”
1M
VGA
Cancel Cancels resizing.41
Using the menu
For details on the operation t page 26
Rotates a still image.
1 Display the image to be rotated.
2 Press MENU to display the menu.
3 Select [ ] (Rotate) with b/B on the control button, then press z.
4 Select [ ] with v, then rotate the image with b/B.
5 Select [OK] with v/V , then press z.
• You cannot rotate protected images, movies, or [Multi Burst] images.
• You may not be able to rotate images shot with other cameras.
• When viewing images on a computer, the image rotation information may not be reflected depending on the software.
Cuts movies, or deletes unnecessary portions of movies. This is the recommended function to use when the “Memory Stick Duo” capacity is insufficient, or when you attach movies to your e-mail messages.
• Note that the original movie is deleted and that number is skipped. Also note that you cannot restore files once you cut them.
(Rotate)
Rotates an image. See the following procedure.
OK Determines the rotation. See the following procedure.
Cancel Cancels rotation.
(Divide)
OK See the following procedure.
Cancel Cancels division.42
For details on the operation t page 26
Example: Cutting a movie numbered 101_0002
This section describes an example of dividing a movie numbered 101_0002 and deleting it in the following file configuration.
1 Cutting scene A.
Divide
101_0002 is divided into 101_0004 and 101_0005.
2 Cutting scene B.
Divide
101_0005 is divided into 101_0006 and 101_0007.
3 Deleting scenes A and B if they are unnecessary.
Delete Delete
4 Only the desired scenes remain.
Procedure
1 Display the movie to be divided.
2 Press MENU to display the menu.
3 Select [ ] (Divide) with b/B on the control button, then press z.
4 Select [OK] with v, then press z.
The playback of the movie starts.
1 2
101_0002
101_0003
3
101_0001
1 2 3 AB
101_0002
101_0004
12 3 B A
101_0005
13
101_0004 101_0007
101_0006
AB 2
13 2
101_000643
Using the menu
For details on the operation t page 26
5 Press z at the desired cutting point.
• When you want to adjust the cutting point, select [c/C] (frame rewind/forward) and adjust the cutting point using b/B.
• If you want to change the cutting point, select [Cancel]. The playback of the movie starts again.
6 Select [OK] with v/V , and press z.
7 Select [OK] with v, then press z.
The movie is cut.
• The cut movies are assigned new numbers, and then recorded as the newest files in the selected recording folder.
• You cannot cut the following kinds of images.
– Still image
– Movies not long enough to cut (shorter than about two seconds)
– Protected movies (page 38)
See page 44.
Records as enlarged image (t step 6 in “Read This First”) as a new file.
1 Press MENU during playback zoom to display the menu.
2 Select [Trimming] with B on the control button, then press z.
3 Select the image size with v/V , then press z.
The image is recorded, and the original image is displayed again.
• The trimmed image is recorded as the newest file in the selected recording folder, and the original image is retained.
• The quality of trimmed images may deteriorate.
• You cannot trim to an image size of 3:2.
• You cannot trim images displayed with Quick Review.
(Setup)
Trimming
Trimming See the following procedure.
Return Cancels trimming.
00:00:02
STD
640
Divide
Dividing
Point
O K
Cancel
Exit
60min
10144
Using the Setup screen
Using Setup items
You can change the default settings using the Setup screen.
1 Turn on the power.
2 Press MENU to display the menu.
3 Press B on the control button to select
(Setup).
4 Press v/V/b/B on the control button to select the item you want to set.
The frame of the selected item turns yellow.
5 Press z to enter the setting.
To turn off the (Setup) screen, press MENU.
To return to the menu from the (Setup) screen, press b on the control button repeatedly.
To cancel the (Setup) setting
Select [Cancel] if it appears, then press z on the control button. If it does not appear, select the previous setting again.
• This setting is maintained even when the power is turned off.v/V/b/B buttonz button
Mode switch
Control button
MENU button45
Using the Setup screen
For details on the operation t page 44
Camera 1
1
The default settings are marked with .
Selects the auto focus operation mode.
Selects the digital zoom mode. The camera enlarges the image using optical zoom (up to 3×).
When the zoom scale exceeds 3×, the camera uses either smart or precision digital zoom.
Image size and maximum zoom scale using Smart zoom
• When you press the zoom lever, the zoom scaling indicator appears as follows.
AF Mode
Single (S AF) Automatically adjusts the focus when the shutter button is pressed and held halfway down. This mode is useful for shooting stationary subjects.
Monitor (M AF) Automatically adjusts the focus before the shutter button is pressed and held halfway down. This mode shortens the time needed for focusing.
• Battery consumption is faster than in [Single] mode.
Digital Zoom
Smart
(Smart zoom)
()
Enlarges the image digitally with almost no distortion. This is not available when the image size is set to [5M] or [3:2].
• The maximum zoom scale of Smart zoom is shown in the following table.
Precision
(Precision digital zoom)
()
Enlarges all image sizes up to a maximum of 6×, but the image quality deteriorates.
Off ( ) Does not use the digital zoom.
Size Maximum zoom scale
5M —
3M Approx. 3.8×
1M Approx. 6.1×
VGA(E-Mail) Approx. 12×
The W side of this line is the optical zoom area, and the T side is the digital zoom area
Zoom scaling indicator46
For details on the operation t page 44
• The maximum zoom scale of smart zoom/precision zoom includes the scale of the optical zoom.
• The AF range finder frame does not appear when using the digital zoom. The , or indicator flashes, and AF operates with priority on subjects located near the center of the frame.
• When using the smart zoom, the image on the screen may look rough. However, this phenomenon has no effect on the recorded image.
Selects how to superimpose the date or time onto the image. Select this before shooting.
• The date and time do not appear during shooting, instead, the indicator appears. The date and time appear in red on the lower-right corner of the screen during playback only.
• You cannot insert the date and time into movies or images in the [Multi Burst] mode.
• The date and time superimposed cannot be removed later.
Reduces the red-eye phenomenon when using the flash. Select this before shooting.
• Because it takes about a second until the shutter clicks, hold the camera firmly to prevent the effects of vibration. Also, do not let the subject move.
• Red-eye reduction may not produce the desired effects depending on individual differences, the distance to the subject, if the subject does not see the pre-strobe, or other conditions.
Date/Time
Day&Time Superimposes the date, hour, and minute.
Date Superimposes the year, month and day.
• The date is inserted in the order you select. (t step 2 in “Read
This First”)
Off Does not superimpose the date and time.
Red Eye Reduction
On ( ) Reduces the red-eye phenomenon.
• The flash pre-strobes twice or more before shooting.
Off Does not use Red Eye Reduction.47
Using the Setup screen
For details on the operation t page 44
The AF illuminator supplies fill light to focus more easily on a subject in dark surroundings.
The AF illuminator emits red light allowing the camera to focus easily when the shutter button is pressed halfway, until the focus is locked. The indicator appears at this time.
• If the AF illuminator light does not reach the subject sufficiently or the subject has no contrast, focus will not be achieved. (A distance of up to approximately 2.0 m (78 25/32 inches) (W)/2.0 m (78 25/32 inches)
(T) is recommended.)
• Focus is achieved as long as the AF illuminator light reaches the subject, even if the light is slightly off the center of the subject.
• When Focus preset is set (page 30), [AF Illuminator] does not function.
• The AF range finder frame does not appear. The , or indicator flashes, and AF operates with priority on subjects located near the center of the frame.
• The AF illuminator does not operate when (Twilight mode), (Landscape mode), (High-speed shutter mode) or (Fireworks mode) is selected in the Scene mode.
• The AF illuminator emits very bright light. Although there are no problems with safety, do not look directly into the AF illuminator emitter at close range.
Displays the recorded image on the screen for approximately two seconds immediately after shooting a still image.
• You cannot shoot the next image during the Auto Review display. If you press the shutter button halfway down during this period, the recorded image display disappears and you can immediately shoot the next image.
AF Illuminator
Auto Uses the AF illuminator.
Off Does not use AF illuminator.
Auto Review
On Use the Auto Review.
Off Does not use Auto Review.
ON48
For details on the operation t page 44
Camera 2
2
The default settings are marked with .
Enlarges the setting indicator temporarily when you press (Flash mode), (Self-timer), or
(Macro).
Enlarged Icon
On Enlarges the indicators.
Off Does not enlarge the indicators.49
Using the Setup screen
For details on the operation t page 44
Memory Stick Tool
The default settings are marked with .
Formats the “Memory Stick Duo”. The supplied or a commercially available “Memory Stick
Duo” is already formatted, and can be used immediately.
• Note that formatting irrevocably erases all data on a “Memory Stick Duo”, including even protected images.
1 Select [OK] with v on the control button, then press z.
The message “All data in Memory Stick will be erased Ready?” appears.
2 Select [OK] with v, then press z.
The format is complete.
Creates a folder in a “Memory Stick Duo” for recording images.
1 Select [OK] with v on the control button, then press z.
The folder creation screen appears.
2 Select [OK] with v, then press z.
A new folder is created with a number incremented one higher than the largest number, and the folder becomes the current recording folder.
• For details on the folder, see page 37.
• When not creating a new folder, the “101MSDCF” folder is selected as the recording folder.
• You can create folders designated up to “999MSDCF.”
• Images are recorded in the newly created folder until a different folder is created or selected.
• You cannot delete a folder with the camera. To delete a folder, use your computer, etc.
• Up to 4,000 images can be stored in one folder. When the folder capacity is exceeded, a new folder is automatically created.
• For more information, see “Image file storage destinations and file names” (page 62).
Format
OK See the following procedure.
Cancel Cancels the formatting.
Create REC. Folder
OK See the following procedure.
Cancel Cancels folder creation.
Create REC. Folder
Creating REC. folder
102MSDCF
Ready?
OK
Cancel
60min50
For details on the operation t page 44
Changes the folder currently used for recording images.
1 Select [OK] with v on the control button, then press z.
The folder selection screen appears.
2 Select the desired folder with b/B, and [OK] with v, then z.
• You cannot select the “100MSDCF” folder as a recording folder.
• You cannot move recorded images to a different folder.
Change REC. Folder
OK See the following procedure.
Cancel Cancels changing the recording folder.
BACK/NEXT
Select REC. Folder
Cancel
OK
Folder Name:102 2/2
Created:No. Of Files:2005
102MSDCF
0
111 : :05:34AM51
Using the Setup screen
For details on the operation t page 44
Setup 1
1
The default settings are marked with .
Selects the brightness of the LCD backlight when using the camera with battery pack.
• Selecting [Bright] uses up the battery charge faster.
Selects the sound produced when you operate the camera.
Selects the language to be used to display the menu items, warnings, and messages.
Initializes the setting to the default setting.
1 Select [OK] with v on the control button, then press z.
The message “Initialize all settings Ready?” appears.
2 Select [OK] with v, then press z.
The settings are reset to the default setting.
• Make sure that the power is not disconnected during resetting.
LCD Backlight
Bright Brightens.
Normal
Beep
Shutter Turns on the shutter sound when you press the shutter button.
On Turns on the beep/shutter sound when you press the control button/ press the shutter button.
Off Turns off the beep/shutter sound.
Language
Initialize
OK See the following procedure.
Cancel Cancels the resetting.52
For details on the operation t page 44
Setup 2
2
The default settings are marked with .
Selects the method used to assign file numbers to images.
Selects the USB mode to be used when connecting the camera to a computer or a PictBridge compliant printer using the USB cable.
Sets the video signal output according to connected equipment.
File Number
Series Assigns numbers to files in sequence even if the recording folder or the “Memory Stick Duo” is changed. (When the replaced “Memory Stick Duo” contains a file with a number higher than the last assigned number, a number one higher than the largest number is assigned.)
Reset Starts from 0001 each time the folder is changed. (When the recording folde

TXT / PDF

Disponible 16 Archivos para DSC-T7 Ver todos >
HelpDrivers Desde Marzo del 2000