Casio GV-20 Descargar Drivers

Compañía
Casio
Dispositivo
Cámaras digitales
Modelo
Casio GV-20
Descripción
Re-installing the USB Driver when Upgrading from Windows2000 to WindowsXP
Sistema Operativo
Windows 2000-XP
Tamaño
22.9Kb
Nombre del archivo
win2kup.exe
Información
Supported Models
QV-2300UX, QV-2400UX, QV-2800UX, QV-2900UX, QV-3EX, QV-3000EX/Ir, QV-3500EX, QV-4000, QV-5700, QV-R3, QV-R4, QV-R40, QV-R41, QV-R51, QV-R52, QV-R61, QV-R62,
GV-10, GV-20,
EX-S1, EX-S2, EX-S3, EX-S20, EX-S20U, EX-S100, EX-M1, EX-M2, EX-M20, EX-M20U, EX-Z3, EX-Z4, EX-Z4U, EX-Z30, EX-Z40, EX-Z50, EX-Z55, EX-Z57, EX-P600, EX-P700




[ Description ]
After you upgrade to Windows XP on a Windows 2000 computer where the QV Digital Camera USB driver was originally installed using plug and play, the standard USB driver may not install properly when you connect a USB cable. If you experience problems performing USB data communication after upgrading to Windows XP, perform the steps provided below to install the USB driver.

[ When installation is not required ]

The standard USB driver should install automatically the first time you connect a USB cable to your computer after upgrading to Windows XP from a Windows 2000 configuration like the once described below.
QV Digital Camera USB driver was not installed under Windows 2000.
Windows 2000 USB Filter Driver, downloaded from the CASIO Website, was installed under Windows 2000.
QV Digital Camera driver was installed using Setup on the CD-ROM that comes bundled with the QV Digital Camera.

Important!
You may still experience USB data communication problems even if you uninstall the QV Digital Camera USB driver from Windows 2000 before upgrading to Windows XP.

[ Symptoms of USB Data Communication Problems ]

The USB data communication problem being described here exists if the message "Cannot Install this Hardware CASIO DIGITAL CAMERA" (Figure 1) appears on your computer screen the first time you connect the USB cable after upgrading from Windows 2000 to Windows XP. If this happens, click [Finish] and then perform the installation procedure below.

Figure 1

[ To install the USB driver ]
1. Go here and download the file named win2kup.exe(22.9KB) .
Double-click the file with your mouse, which will extract a file named win2kup.inf.
On some computers, the extracted file name will appear as win2kup instead of win2kup.inf.

2.
Copy win2kup.inf to a floppy diskette, and insert the diskette into your computer's disk drive (A:).

Figure 2
3. Turn on your QV Digital Camera and connect it to your computer using the USB cable.
4.
Select My Computer, right-click and then select Properties.
On the dialog box that appears, select Hardware Device Manager Universal Serial Bus controllers.
5. Select CASIO DIGITAL CAMERA, which should have a yellow exclamation mark (!) next to it (Figure 3). Right-click with your mouse and then select Update Driver.

Figure 3
6. Under What do you want the wizard to do? on the Hardware Update Wizard screen, select Install from a list or specific location (Advanced) and then click Next.

Figure 4
7. For Please choose your search and installation option, select Don't search. I will choose the driver to install and then click Next.

Figure 5
8. For Hardware Type, select Universal Serial Bus controllers and then click Next.

Figure 6
9. For Model under Select the device driver you want to install for this hardware, select CASIO DIGITAL CAMERA, and then click Have Disk.

Figure 7
10. When the Install From Disk screen appears, make sure that A:/ is selected for Copy manufacture's files from: and then click OK. If A:/ is not selected, click Browse and then select A:/.

Figure 8
11. This should cause Select the device driver you want to install for this hardware to change to Casio Digital Camera, so click Next.

Figure 9
12. This will cause the message has not passed Windows Logo testing to verify its compatibility with Windows XP to appear on the Hardware Installation screen. Simply click Continue Anyway.

Figure 10
13. On the Completing the Hardware Update Wizard screen, click Finish.

Figure 11
14. Next, open Device Manager again.
15. In Universal Serial Bus controllers, select Casio Digital Camera, right-click with your mouse, and then select Update Driver.

Figure 12
16. When Hardware Update Wizard appears, select Install the software automatically (Recommended) for What do you want the wizard to do?, and then click Next.

Figure 13
17. On the Completing the Hardware Update Wizard screen, click Finish.

Figure 14
18. This completes the installation procedure. Next you should perform the steps below to confirm that the driver is selected correctly.

>[ To check if the USB driver is selected ]
1. Select Device Manager Universal Serial Bus controllers Casio Digital Camera.
2.
Right-click with the mouse to display Properties.
3. Select Driver Driver Details.
4.
Confirm that the qv2kux.sys file is selected under Driver files:, and then click OK.
If qv2kux.sys file is not selected, click OK and perform the entire procedure under "To install the USB driver" again.


Figure 15
Compañía
Casio
Dispositivo
Cámaras digitales
Modelo
Casio GV-20
Descripción
USB Driver
Sistema Operativo
Mac OS 8.1 to 8.5.1
Idioma
Mar.2003
Tamaño
13.2Kb
Nombre del archivo
usbdriver85.sit
Información
Supported Models:
QV-8000SX, QV-2000UX/Ir, QV-3000EX/Ir, QV-2300UX, QV-2400UX, QV-2800UX, QV-2900UX, QV-3500EX, QV-3EX, QV-5700, QV-4000, QV-R3, QV-R4, QV-R40, QV-R41, QV-R51, QV-R52, QV-R61, GV-10, GV-20, EX-S1, EX-M1, EX-S2, EX-M2, EX-S3, EX-Z3, EX-Z4, EX-S20, EX-M20, EX-S100, EX-Z4, EX-Z30, EX-Z40, EX-Z50, EX-Z55, EX-P600, EX-P700

• You do not need to install the USB driver if your Macintosh is running the Mac OS9 Series or Mac OS X (10.1 to 10.2). USB connection is possible simply by connecting the USB cable.
Installation Precautions and Procedures
Installation notes
Be sure not to connect your digital camera to your computer before you install the downloaded USB driver.

1. Use StuffIt Expander or some other application to expand the file you downloaded (USBdriver85.sit).
• This creates a folder named "UsbDriver" and creates the files listed below inside of it.
CASIO-USB StorageDriver
CASIO-USB StorageClassShim
readme


2. Double-click the hard disk that is specified as your startup disk.


3. On the "Hard Disk" window that opens, double click the "System Folder" to open it.


4. On the "System Folder" window, double click the "Extensions"folder to open it.


5. Double-click the extracted "USBdriver85" folder to extract it.


6 On the "USBdriver85" window that opens, drag the "CASIO-USB StorageDriver" file and "CASIO-USB StorageClassShim" file to the "Extensions" folder window you opened above.


7 This completes USB driver installation. Restart your Macintosh, and then use the special USB cable to connect your digital camera to your Macintosh. When you turn on your digital camera, the memory card loaded in it will be mounted on your Macintosh as a drive.

Now, whenever you connect your digital camera to your computer, the memory card loaded in the digital camera will be shown as a "Removable Disk".

Important!

* Never disconnect the USB cable while data communication is in progress. Doing so can cause data to become corrupted.

* The specifications and performance of the USB driver are subject to change without notice.

* This upgrade offer may be terminated without notice.

Note
* Uninstalling the USB Driver

1. Move the "CASIO-USB StorageDriver" file and "CASIO-USB StorageClassShim" file from the "Extensions" folder (located in the "System" folder) to the Trashcan.
2. Restart your Macintosh.
•This completes the uninstall operation.
Compañía
Casio
Dispositivo
Cámaras digitales
Modelo
Casio GV-20
Descripción
USB Driver
Sistema Operativo
Mac OS 8.6
Idioma
Mar.2003
Tamaño
14.4Kb
Nombre del archivo
usbdriver.sit
Información
Supported Models:
QV-8000SX, QV-2000UX/Ir, QV-3000EX/Ir, QV-2300UX, QV-2400UX, QV-2800UX, QV-2900UX, QV-3500EX, QV-3EX, QV-5700, QV-4000, QV-R3, QV-R4, QV-R40, QV-R41, QV-R51, QV-R52, QV-R61,GV-10, GV-20,
EX-S1, EX-M1, EX-S2, EX-M2, EX-S3, EX-Z3. EX-Z4, EX-S20, EX-M20, EX-S100, EX-Z30, EX-Z40, EX-Z50, EX-Z55, EX-P600, EX-P700

• You do not need to install the USB driver if your Macintosh is running the Mac OS9 Series or Mac OS X (10.1 to 10.2). USB connection is possible simply by connecting the USB cable.
Installation Precautions and Procedures
Installation notes
Be sure not to connect your digital camera to your computer before you install the downloaded USB driver.

1. Use StuffIt Expander or some other application to expand the file you downloaded (USBdriver.sit).
• This creates a folder named "UsbDriver" and creates the files listed below inside of it.
CASIO-USB StorageDriver
CASIO-USB StorageClassShim
readme


2. Double-click the hard disk that is specified as your startup disk.


3. On the "Hard Disk" window that opens, double click the "System Folder" to open it.


4. On the "System Folder" window, double click the "Extensions"folder to open it.


5. Double-click the extracted "USBdriver" folder to extract it.


6 On the "USBdriver" window that opens, drag the "CASIO-USB StorageDriver" file and "CASIO-USB StorageClassShim" file to the "Extensions" folder window you opened above.


7 This completes USB driver installation. Restart your Macintosh, and then use the special USB cable to connect your digital camera to your Macintosh. When you turn on your digital camera, the memory card loaded in it will be mounted on your Macintosh as a drive.

Now, whenever you connect your digital camera to your computer, the memory card loaded in the digital camera will be shown as a "Removable Disk".

Important!

* Never disconnect the USB cable while data communication is in progress. Doing so can cause data to become corrupted.

* The specifications and performance of the USB driver are subject to change without notice.

* This upgrade offer may be terminated without notice.

Note
* Uninstalling the USB Driver

1. Move the "CASIO-USB StorageDriver" file and "CASIO-USB StorageClassShim" file from the "Extensions" folder (located in the "System" folder) to the Trashcan.
2. Restart your Macintosh.
•This completes the uninstall operation.
Compañía
Casio
Dispositivo
Cámaras digitales
Modelo
Casio GV-20
Descripción
USB Driver for Windows Movie Maker
Sistema Operativo
Windows
Idioma
Mar.2003
Tamaño
1.93Mb
Nombre del archivo
usb_gv10_win.exe
Información
Applicable Users
Note your computer operating system and the applications you are running on your computer determine which USB driver you should use.

If you are using Windows Movie Maker on a computer running Windows Me or XP
• Do not use the USB driver on the CD-ROM that comes bundled with your GV-10/GV-20 camera.
• Instead, use this USB driver.


If you are using the camera as a video camera for video conferencing with NetMeeting on a computer running Windows 98, Me, 2000, or XP
• Use this USB driver.

If you are using Windows Messenger on a computer running Windows XP
• Do not use this USB driver.
• Instead, use the USB driver on the CD-ROM that comes bundled with your GV-10/GV-20 camera.
Installation Precautions and Procedures
Installation notes

* If you already have the USB driver on the CD-ROM that comes bundled with the GV-10/GV-20 installed on your computer, you do not need to uninstall it before installing this driver. Simply install this USB driver over the driver from the CD-ROM.
* Be sure not to connect your digital camera to your computer before you install the downloaded USB driver.If the digital camera is connected to a computer before installing the driver, the Plug & Play function may register it as an unidentified device.

1. Double-click the compressed USB driver file (usb_gv10_win.exe) that you downloaded. This will automatically extract it.


2. On the dialog box that appears, specify the location where you want to extract the files, and then click "OK"
• This will create a folder named "usb_gv10_win" at the location you specified. The folder will contain the files listed below.


3. Open the extracted "usb_gv10_win" folder, and then double click "Setup.exe" to start the installer (Figure 1).


Figure 1




4. On the "Choose Setup Language" dialog box that appears, select "English", and then click "OK" (Figure 2).


Figure 2




5. In response to the "Warning" dialog box with the message "Please disconnect your camera from PC now before running this installer." (Figure 3), click "OK"


Figure 3




6 On the "welcome" dialog box that appears (Figure 4), click [Next].
• This starts installation.


Figure 4



7 When the "Setup Complete" dialog box appears (Figure 5), select the "Yes, I want to restart my computer now" check box, and then click [Finish].


Figure 5




8. After your computer restarts, turn on the camera.


9. Check the "SET UP" menu. If its setting shows "USB" - "PC CAMERA", change the "SET UP" menu to "PC".


10. Use the special USB cable to connect the camera to your computer.

This completes installation of the USB driver. Start up Windows Movie Maker or Net Meeting, and confirm that the camera is working correctly as a video camera.

Important!

* Never disconnect the USB cable while data communication is in progress. Doing so can cause data to become corrupted.

* The specifications and performance of the USB driver are subject to change without notice.

* This upgrade offer may be terminated without notice.
Compañía
Casio
Dispositivo
Cámaras digitales
Modelo
Casio GV-20
Descripción
USB Driver
Sistema Operativo
Windows 98-98Se-Me-2000
Idioma
Mar.2003
Tamaño
882Kb
Nombre del archivo
usb_win.exe
Información
Supported Models:
QV-2300UX, QV-2400UX, QV-2800UX, QV-2900UX, QV-3000EX/Ir, QV-3500EX, QV-3EX, QV-5700, QV-4000, QV-R3, QV-R4, QV-R40, QV-R41,QV-R51, QV-R52, QV-R61, GV-10*1, GV-20*1, QV-8000SX*2, QV-2000UX/Ir*2, EX-S1, EX-M1, EX-S2, EX-M2, EX-S3, EX-Z3, EX-Z4, EX-S20, EX-M20, EX-S100, EX-Z30, EX-Z40, EX-Z50, EX-Z55, EX-P600, EX-P700

*1 This USB driver is for image import only (when "NORMAL" is selected on the "SET UP" menu). It cannot be used in the case of a PC camera (when "PC CAMERA" is selected on the "SET UP" menu).
*2 Note that use of this upgrade is not supported under Windows 2000. Instead, install the Windows 2000 USB Filter Driver.
• This USB driver does not need to be installed for Windows XP. USB connection is possible simply by connecting the USB cable.
Installation Precautions and Procedures
Installation notes
Be sure not to connect your digital camera to your computer before you install the downloaded USB driver.If the digital camera is connected to a computer before installing the driver, the Plug & Play function may register it as an unidentified device.

1. Double-click the compressed USB driver file (usb_win.exe) that you downloaded. This will automatically extract it.


2. On the dialog box that appears, specify the location where you want to extract the files, and then click "OK"
• This will create a folder named "usb_win" at the location you specified. The folder will contain the files listed below.


3. Open the extracted "usb_win" folder, and then double click "Setup.exe" (Figure 1) to start the installer.


Figure 1




4. On the welcome dialog box that appears (Figure 2), click [Next].
• This starts installation.


Figure 2




5. When the "InstallShield Wizard Complete" dialog box appears, select the "Yes, I want to restart my computer now" check box, and then click [Finish] (Figure 3).


Figure 3




6 After your computer restarts, use the special USB cable to connect your digital camera to your computer.
• After your computer restarts, double-click "My Computer".



7 Check to make sure that the memory card loaded in the digital camera is shown as a "Removable Disk" on your computer screen (Figure 4).


Figure 4



Now, whenever you connect your digital camera to your computer, the memory card loaded in the digital camera will be shown as a "Removable Disk".

Important!

* Never disconnect the USB cable while data communication is in progress. Doing so can cause data to become corrupted.

* The specifications and performance of the USB driver are subject to change without notice.

* This upgrade offer may be terminated without notice.

Note
* Uninstalling the USB Driver

1. Click your computer!s [Start] button.
2. Click "Settings", "Control Panel", and then "Add/Remove Program".
3. On the list of programs on the dialog box that appears, select "USB CASIO Digital Camera", and then click [Add/Remove].
4. In response to the "This will remove CASIO Digital Camera from your computer. Do you wish to proceed?" message that appears, select [Yes] to perform the uninstall operation.
Disponibles 5 archivos para GV-20
HelpDrivers Desde Marzo del 2000