Canon Digital IXUS 700 Descarga Drivers

Windows
Macintosh
• This guide explains how to install the software programs and briefly introduces their functions and operating procedures.
• Please read the software license agreement that displays during installation before using the software on the supplied CD-ROM.
You must accept the terms and conditions of the software license agreement to use the software.
Software Starter Guide
(For the Canon Digital Camera Solution Disk Version 23)
ENGLISH
You must install the software bundled on the Canon
Digital Camera Solution Disk before connecting the camera to the computer.
Install the software.
Connect the camera to the computer.
(p. 10)
(p. 49)
Windows/Macintosh Windows MacintoshThe precautions noted within this guide are intended to instruct you in the safe and correct use of the products and to prevent injuries or damage to yourself, other persons and property.
Please read and ensure that you understand them before proceeding to other sections of the guide.
Trademark Acknowledgments
• ArcSoft, the ArcSoft logo and ArcSoft PhotoStudio are trademarks or registered trademarks of ArcSoft, Inc.
• Adobe is a trademark of Adobe Systems Incorporated.
• CompactFlash is a trademark of SanDisk Corporation.
• Macintosh, Mac OS and QuickTime are trademarks of Apple Computer Inc., registered in the United States and other countries.
•M i c r o s o f t

and Windows

are either registered trademarks or trademarks of Microsoft
Corporation in the United States and/or other countries.
• Other names and products not mentioned above may be registered trademarks or trademarks of their respective companies.
Copyright © 2005 Canon Inc. All rights reserved.
SAFETY PRECAUTIONS
Warnings This symbol indicates topics that could lead to death or serious injury if ignored or handled incorrectly.
Warnings
• Do not play the supplied CD-ROM(s) in any CD player that does not support data CD-
ROMs. Playing the CD-ROM(s) in an audio CD player (music player) could damage the speakers. It is also possible to suffer from hearing loss from listening with headphones to the loud sounds of a CD-ROM played on a music CD player.
Disclaimer
• While every effort has been made to ensure that the information contained in this guide is accurate and complete, no liability can be accepted for any errors or omissions. Canon reserves the right to change the specifications of the hardware and software described herein at any time without prior notice.
• No part of this guide may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language in any form, by any means, without the prior written permission of Canon.
• Canon makes no warranties for damages resulting from corrupted or lost data due to a mistaken operation or malfunction of the camera, the software, the CompactFlash cards
(CF cards), personal computers, peripheral devices, or use of non-Canon CF cards.1
Table of contents
Read This First 3
It’s so Simple! Make Prints Right at Home Like a Pro ......................4
Unbounded Possibilities with Entertaining Software .....................6
System Requirements ........................................................................8
Using the Software on the Windows Platform
– Preparations 10
Installing the Software and USB Driver ..........................................10
Using the Software on the Windows Platform
– The Basics 15
Downloading Images to the Computer ..........................................15
Printing Images ................................................................................21
Using the Software on the Windows Platform
– Advanced Techniques 26
The ZoomBrowser EX Windows ......................................................26
ZoomBrowser EX Features ..............................................................32
Checking Images before Downloading ..........................................34
Replaying Movies .............................................................................36
Editing Movies .................................................................................37
Converting RAW Images .................................................................38
Operating the Shutter Remotely ....................................................41
Merging Panoramic Images - PhotoStitch ......................................44
Enjoy Customizing Your Camera with the My Camera Settings ...45
Using the Software on the Macintosh Platform
– Preparations 49
Installing the Software ....................................................................49
Using the Software on the Macintosh Platform
– The Basics 51
Downloading Images to the Computer ..........................................51
Printing Images ................................................................................56Table of contents
2
Using the Software on the Macintosh Platform
– Advanced Techniques 59
The ImageBrowser Windows ..........................................................59
ImageBrowser Features ...................................................................65
Checking Images before Downloading ..........................................67
Replaying Movies .............................................................................69
Editing Movies .................................................................................70
Converting RAW Images .................................................................71
Operating the Shutter Remotely ....................................................73
Merging Panoramic Images - PhotoStitch ......................................76
Enjoy Customizing Your Camera with the My Camera Settings ...77
Appendices 81
ArcSoft PhotoStudio ........................................................................81
Uninstalling the Software ...............................................................83
Memory Card Folder Structure .......................................................86
Troubleshooting ..............................................................................87
Information about Your Camera 95
Information Common to All Models ..............................................95
PowerShot A520/PowerShot A510 ..................................................97
DIGITAL IXUS 700 .............................................................................97
DIGITAL IXUS 50 ...............................................................................97
Index .................................................................................................983
Windows/Macintosh
Read This First
This chapter explains what you can accomplish using the camera with the software contained on the Canon Digital Camera Solution Disk.
It also lists the computer system configurations required to use the software.
About this Guide
•The explanations in this guide are based on Windows XP and Mac OS X v10.3. If you are using another version of these operating systems, the actual screen contents and procedures may vary slightly from those shown.
•The following terms are used in this guide.
Mac OS X is used for Mac OS X (v10.1.5-v10.3)
Memory card is used for CF cards, SD cards, MultiMediaCards and PC cards.It’s so Simple! Make Prints Right at Home Like a Pro
4
Windows/Macintosh
It’s so Simple! Make Prints Right at Home
Like a Pro
See your Camera User Guide for shooting instructions.
Just install the software once at the beginning.
Shoot the images
Install the software on the computer
Windows (p. 10)
Macintosh (p. 49)It’s so Simple! Make Prints Right at Home Like a Pro
5
Windows/Macintosh
Download images to the computer
Print the images
Connect the camera to the computer
Windows (p. 15)
Macintosh (p. 51)
Windows (p. 21)
Macintosh (p. 56)
(p. 96)Unbounded Possibilities with Entertaining Software
6
Windows/Macintosh
Unbounded Possibilities with Entertaining
Software
Print a Variety of Layouts
Print with the diverse layouts available in PhotoRecord (Windows) and ImageBrowser
(Macintosh). The examples shown are from PhotoRecord (Windows).
Stitch a Panorama Together
Create a panoramic image from a series of images with PhotoStitch.
Confirm all your images in one glance with index (contact sheet) printing.
Make your own photo album of precious moments.Unbounded Possibilities with Entertaining Software
7
Windows/Macintosh
Send an Image as an E-mail Attachment
Attach an image to an e-mail message by starting your mail software from within
ZoomBrowser EX (Windows) or ImageBrowser (Macintosh).
Operate the Camera Shutter from the Computer
Release the camera’s shutter from the computer with ZoomBrowser EX (Windows) or
ImageBrowser (Macintosh). The recorded image is saved directly to your computer.
Edit a Movie
You can create and edit movies: link movies and stills that have been downloaded to your computer, add background music, superimpose titles and other text, and apply various effects to the movies.
Convert a RAW Image
RAW images are extremely high-quality images that are free of the resolution loss associated with compression processing. However, since RAW images are a special type of image, it is necessary to convert them into standard images. You can make fine adjustments to the image quality and coloration when they are converted.
Release the shutter from the computer.System Requirements
8
Windows/Macintosh
System Requirements
Please install the software on a computer meeting the following minimum requirements.
Windows
•A CD-ROM drive is required to install the software.
•Even when system requirements are met, not all computer functions can be guaranteed.
•A sound card is required to play movie file audio tracks under Windows.
•With Windows, QuickTime 6.5 is required to play or edit movies or to save images merged with PhotoStitch as QuickTime VR files. QuickTime is included on the Canon Digital Camera Solution Disk.
•Macintosh software cannot be used on disks formatted in the UFS (Unix File
System) format.
OS Windows 98 Second Edition (SE)
Windows Me
Windows 2000 Service Pack 4
Windows XP (including Service Pack 1 and Service Pack 2)
Computer Model The above OS should be pre-installed on computers with built-in USB ports.
CPU Pentium 500 MHz or higher processor
RAM Windows 98 SE/Windows Me: 128 MB or more
Windows 2000/Windows XP: 256 MB or more
Interface USB
Free Hard Disk
Space
•Canon Utilities
- ZoomBrowser EX: 250 MB or more
(Including the PhotoRecord printing program)
- PhotoStitch: 40 MB or more
•Canon Camera TWAIN Driver: 25 MB or more
•Canon Camera WIA Driver: 25 MB or more
•ArcSoft PhotoStudio: 50 MB or more
Display 1,024 x 768 pixels/High Color (16 bit) or betterSystem Requirements
9
Windows/Macintosh
Macintosh
OS Mac OS X (v10.1.5-v10.3)
Computer Model The above OS should be pre-installed on computers with built-in USB ports.
CPU PowerPC G3/G4/G5
RAM 256 MB or more
Interface USB
Free Hard Disk
Space
•Canon Utilities
- ImageBrowser: 200 MB or more
- PhotoStitch: 40 MB or more
•ArcSoft PhotoStudio: 50 MB or more
Display 1,024 x 768 pixels/32,000 Colors or better10
Windows
Using the Software on the Windows
Platform – Preparations
This chapter explains the basic procedures for installing the software and connecting the camera to a computer. Read this material before you connect the camera to the computer.
Installing the Software and USB Driver
Start by installing the software from the Canon Digital Camera Solution Disk.
Items to Prepare
•Your camera and computer
•Canon Digital Camera Solution Disk
•Interface cable supplied with the camera
Installation Procedures
1 Confirm that the camera is NOT connected to the computer.
If it is, disconnect the cable. The software cannot be properly installed if the camera is connected to the computer at the start.
2 Close any programs that are running.
•You must install the software before you connect the camera to the computer.
• Users of Windows XP and Windows 2000 must first log in as an Administrator
(computer system administrator) to install programs.
See ArcSoft PhotoStudio (p. 81) for details on how to install ArcSoft
PhotoStudio.Installing the Software and USB Driver
11
Windows
3 Place the Canon Digital Camera Solution Disk in the computer’s CD-ROM drive.
If the installer panel does not appear automatically, use the following procedures.
4 Click the Digital Camera Software
[Install] button.
How to Display the Installer Panel
Use the following procedures to display the installer panel if it does not appear automatically.
Windows XP
1. Select [My Computer] from the [Start] menu.
2. Right-click the CD-ROM icon and select [Open].
3. Double-click the [SETUP .EXE] icon.
Windows 2000, Windows Me, Windows 98 SE
1. Double-click the [My Computer] icon on the desktop.
2. Right-click the CD-ROM icon and select [Open].
3. Double-click the [SETUP .EXE] icon.
Some computers may not display the [.EXE] file name extension as shown above.
Follow any instructions to restart your computer, if they appear. If the following window appears, continue with the installation.
Installer PanelInstalling the Software and USB Driver
12
Windows
5 Click [Next].
6 Select [Easy Installation] as the setup type and click [Next].
Select [Custom Installation] to select programs individually for installation.
7 Click [Yes] if you agree to all of the terms of the software license agreement.
8 Review the installation settings and click [Next].
Follow the onscreen instructions to proceed.
The items displayed here differ according to the software installed.
When [Custom Installation] is Selected
The USB driver (the software for connecting) is required when the camera is connected to the computer with an interface cable. Ensure that you select a USB driver from below (the appropriate one for your operating system).
•Windows 2000/Windows 98 SE: Canon Camera TWAIN Driver
•Windows Me: Canon Camera WIA Driver
With Windows XP, the USB driver supplied with the Windows operating system is used so there is no need to install a USB driver.Installing the Software and USB Driver
13
Windows
9 When the installation is over, select
[Yes, I want to restart my computer now.] and click [Finish].
At this stage, do NOT remove the Solution
Disk from the CD-ROM drive yet.
10 Remove the disk from the CD-ROM drive when your normal desktop screen appears after restarting.
This concludes the software installation.
Continue by connecting the camera to the computer so that the USB driver can be utilized.
11 Attach the camera to the computer with the interface cable and set the camera to the correct mode for connecting.
Users of Windows XP and Windows 2000 must log in as an Administrator
(computer system administrator) after restarting to carry out the subsequent procedures.
If you installed a USB driver, so far the required files have only been copied to your computer. You must now connect the camera to the computer with the interface cable to complete the installation and prepare the driver for use.
See Uninstalling the Software (p. 83) to delete the installed programs.
Procedures for attaching the camera to the computer and placing the camera in the correct mode for connecting vary between camera models.
See Information about Your Camera (p. 95). Installing the Software and USB Driver
14
Windows
If the Digital Signature Not Found window appears, click [Yes].
The USB driver will automatically finish installing onto the computer when you attach the camera and open a connection.
Dialogs similar to the following will appear during this process (first time the camera is connected to a computer only).
Windows XP
The dialog on the right will appear after a few moments.
Windows 2000/Windows Me/Windows 98 SE
Restart the computer according to the instructions if you are prompted to do so by a message.
A dialog allowing you to set the default settings will display after installation. See Using the Software on the Windows Platform – The Basics (p. 15) for the subsequent procedures.
This concludes the software and USB driver installation and the procedures for connecting the camera to the computer.
You may now download camera images to the computer (p. 15).
•See USB driver installation not proceeding well in the Troubleshooting section (p. 87) if you are having problems installing the USB driver.
•See Uninstalling the USB Driver (p. 84) to delete the USB driver installed with these procedures.
•See If You Were Using ZoomBrowser EX Version 2 or 3 (p. 94) if you were previously using either version. 15
Windows
Using the Software on the Windows
Platform – The Basics
This chapter explains the procedures for using ZoomBrowser EX to download the camera's images to the computer and print them.
Read this chapter after completing the preparations in the Using the Software on the Windows
Platform – Preparations section.
Downloading Images to the Computer
Begin by downloading the images to your computer. The downloading procedure is slightly different according to whether you are using a camera to computer connection (see below) or a memory card reader (p. 19).
Camera to Computer Connection
1 Attach the supplied interface cable to the computer’s USB port and the camera’s
DIGITAL Terminal. Prepare the camera for communication with the computer.
The Camera Control Window will appear.
Camera Control Window
You can also display an index of the camera or memory card images to check them before downloading or to download them selectively. For instructions, see Checking Images before Downloading (p. 34).
Procedures for attaching the camera to the computer and placing it in the correct mode for connecting vary between camera models. See
Information about Your Camera (p. 95). Downloading Images to the Computer
16
Windows
2 Download the images.
Download the images using the camera or the computer. By default, the downloaded images are saved into the [My Pictures] folder.
You can adjust the settings, such as the type of image downloaded and the destination folder, by clicking [Preferences].
First Time Camera is Connected to a Computer
Set the following settings the first time you connect the camera to the computer. These procedures are not required from the second connection onward.
Select [Canon CameraWindow] when a dialog (Events dialog) similar to that on the right displays and click [OK].
Your camera model name or [Canon
Camera] will appear here.
Different programs may display according to your computer setup.
If this Events dialog does not appear, click the [Start] menu and select
[All Programs] or [Programs], followed by [Canon Utilities],
[CameraWindow] and [CameraWindow].Downloading Images to the Computer
17
Windows
Using the Camera to Download Images (Direct Transfer Function)

Set the Direct Transfer settings on the camera and press the (Print/Share) button or the [SET] button.
Using the Computer to Download Images
Click [Starts to download images].
The downloaded images will be saved into folders according to their shooting date.
•If the conditions are right for the Direct Transfer function, the Direct
Transfer settings menu will appear in the LCD monitor. In addition, the
(Print/Share) button will light if your camera is equipped with one.
•See the Camera User Guide for instructions regarding Direct Transfer settings and procedures.
•By default, all the images that have yet to be downloaded will download.
•To download images that have had their transfer settings set with the camera, click [Preferences] and select [Images whose transfer settings were specified with the camera] as the image type to be downloaded. Downloading Images to the Computer
18
Windows
By default, when downloading is complete, the thumbnails (tiny versions) of the downloaded images display in
ZoomBrowser EX’s Main Window.
Thumbnail
Shows the folder where the images are saved.
Next, print out the images (p. 21). Downloading Images to the Computer
19
Windows
Memory Card Reader Connection
1 Insert the memory card into the reader.
Use a separately sold card adapter (PCMCIA adapter) if required.
See the manual for the memory card reader for its connection and handling instructions.
2 Select [View/Download Images using
Canon CameraWindow] when the dialog to the right appears and click
[OK].
The Camera Control Window will display.
3 Click [Starts to download images].
You can adjust the settings, such as the type of image downloaded and the destination folder, by clicking [Preferences].
If the dialog above fails to appear, click the [Start] menu and select [All
Programs] or [Programs], followed by [Canon Utilities], [CameraWindow] and [CameraWindow], and proceed to Step 3.
(1) Place the memory card in an adapter if required.
The card adapter and memory card shape may vary according to the type of memory card your camera utilizes.
(2) Insert the loaded adapter into the slot.Downloading Images to the Computer
20
Windows
The downloaded images are saved into folders according to the shooting date.
By default, when the download is complete, the thumbnails (tiny versions) of the downloaded images display in ZoomBrowser EX’s main window.
Next, print out the images (p. 21).
•By default, all the images that have yet to be downloaded will download to the [My Pictures] folder.
•To download images that have had their transfer settings set with the camera, click [Preferences] and select [Images whose transfer settings were specified with the camera] as the image type to be downloaded.
•See Memory Card Folder Structure (p. 86) for information about memory card folder structures and file names.Printing Images
21
Windows
Printing Images
This section explains the basic procedures for using PhotoRecord, a printing utility program. See the program’s [Help] menu for more details.
1 Click [Print] in ZoomBrowser EX’s Main Window, followed by [Layout Print].
2 Confirm that [1. Select Images] is selected and proceed to select images.
•Movies cannot be printed.
• With images shot by Exif 2.2 (called Exif Print) compatible cameras, shooting information such as the shooting settings and mode can be included with the images. This data is then used to correct the images to obtain better prints.
•PhotoRecord automatically carries out image correction (by default) both with images shot with Exif 2.2 compatible cameras and other images, yielding high-quality prints.
The background of the selected image(s) will turn blue. Printing Images
22
Windows
3 Click [2. Select Captions for Printing] and place a check mark beside the type of information that will be printed with the images.
If you select [Date and Time], for example, you can print the images with their shooting dates and times included.
4 Click [3. Open Layout Print].

PhotoRecord will start, displaying the selected image and the information selected in Step 3 in the Album window.
In addition, the steps that will take you through the printing process will display on the left side. Follow the steps in order to proceed.
From this point onward, the procedures vary according to whether you select Full Page
Print (prints one image per page) or Layout and Print (prints an arrangement of images on each page).
You can add a comment to an image in the Properties Window (p. 31).
Album Window
The selected images display here.
The printing procedures display here.Printing Images
23
Windows
Full Page Print
This option prints one image per page.
1 Click [2 Select Printer & Album Type].
Once you have chosen a printer, select
[One Photo Per Page] or [One Photo Per
Sheet] in the Album Type category.
2 Click [3 Select Paper] and select the paper size and orientation.
3 Click [4 Print], confirm the number of copies and other printing settings, and click [Print].
This will start printing.
To close PhotoRecord after printing is complete, click . Click [Yes] to save the album or [No] to close it without saving. The ZoomBrowser EX window will reappear when the save procedure is complete.Printing Images
24
Windows
Layout and Print
This option prints multiple images on a single page as in a photo album.
1 Click [2 Select Printer & Album Type].
Once you have chosen a printer, select
[Free Form] in the Album type category.
2 Click [3 Select Paper] and select the paper size and orientation.
3 Click [Decorate Album] and change the design of the image background and border as desired.
Click the [Themes], [Backgrounds], [Photo
Frames], [Text Frames] or [Clipart] button to switch between selections.
Perform the procedures according to the instructions beside the symbol.
•The [Themes] category provides consistent designs for use throughout an entire album.
•You can also click [Add Titles & Captions] to add text as a title or caption. Printing Images
25
Windows
4 Click [4 Print], confirm the number of copies and other printing settings, and click [Print].
This will start printing.
To close PhotoRecord after printing is complete, click . Click [Yes] to save the album or [No] to close it without saving. The ZoomBrowser EX window will reappear when the save procedure is complete.
This chapter explained the ZoomBrowser EX basics. Once you have mastered them, try the advanced techniques.
Using the Software on the Windows Platform – Advanced Techniques (p. 26).
There are numerous varieties of albums. Select one to suit your purposes.
Please note that the available album types may vary slightly according to the printer in use.
Album Type Description
One Photo Per Page
Prints one image on each sheet of paper.
One Photo Per Sheet
Free Form
Allows images to be freely positioned on the page and printed.
Contact Sheet
Prints thumbnails of the images and their shooting data (Exif data*).
Fixed Size Photo
Allows image heights and widths to be specified and prints.
Mosaic Lines up the specified number of images and prints.
Perforated Paper Prints on perforated paper.
8-Sticker Label Prints on 8-label sheets.
* The shooting information displayed in ZoomBrowser EX and the Exif data that can be printed using PhotoRecord differ slightly. 26
Windows
Using the Software on the Windows
Platform – Advanced Techniques
This chapter explains various ZoomBrowser EX features.
Proceed to this chapter once you have mastered the basic ZoomBrowser EX procedures in the
Using the Software on the Windows Platform – The Basics chapter.
The ZoomBrowser EX Windows
This section describes the principal ZoomBrowser EX windows: the Main Window, Viewer
Window and Properties Window.
Main Window
This window is for displaying and organizing images downloaded to the computer.
Folders Area (p. 27)
Task Area (p. 27)
Browser Area (p. 27)
Function Buttons (p. 29)
Switches between showing and hiding the Task Area and Folders Area.
Display Mode
(p. 28)
Display Control
Panel (p. 29)The ZoomBrowser EX Windows
27
Windows
Task Area
•ZoomBrowser EX's tasks are arranged here like an index.
• Click a Task button to carry out the desired task.
These features are described in ZoomBrowser
EX Features (p. 32).
Folders Area
•Use this area to select folders. The images in the selected folder display in the Browser Area.
If you select a network drive in advance with Windows Explorer, you can display network folders, but you cannot add, change or delete those folders in the Browser Area.
•If you selected Favorite Folders, only the folders registered in advance as Favorite Folders will display. You are recommended to register a folder that you use frequently as one of the
Favorite Folders. If you selected All Folders, all the folders will display.
Browser Area
•The images in the folder selected in the Folders Area will display here.
The display style will vary according to your Display Mode selection.
•You can sort the image order in the Browser Area by file name, shooting date or other characteristics by clicking the [Tools] menu and selecting [View] and [Sort by].
•The following icons will display around images according to their attributes.
Images shot with the camera's Stitch Assist mode
RAW images
Movies
Images with sound memo attachments
Protected images
Images shot with the camera's AEB function
Methods for Registering a Favorite Folder
•If [Favorite Folders] is displayed: click [Add] and select a folder.
•If [All Folders] is displayed: select a folder and click [Add to Favorites].
•To delete a folder in the Favorite Folders area, select a folder and click the [Delete] button.
Methods for Selecting Images in the Browser Area
•Selecting a single image: click on an image.
•Selecting multiple images: click on the first image and then hold the [Ctrl] key down while clicking on additional images.
• Selecting consecutive images: click on the first image and then hold the [Shift] key down while clicking on the last image.The ZoomBrowser EX Windows
28
Windows
Display Mode
•Selects the display style for the Browser Area.
Zoom Mode
Displays all the images in a folder as thumbnail images. This mode is convenient for searching for images since many can be displayed at once.
If additional folders are nested within a folder, their images are displayed as thumbnails as well.
Scroll Mode
This mode is convenient for checking the images in multiple folders at once. If the displayed folder is at the highest level, then all thumbnails in the lower-level folders also display. You can change the folder level (folder depth) by clicking the [Tools] menu and selecting [Preferences].
The images within nested folders also display.
Preview Mode
This mode displays the image at a larger size as well as the image information.
Positioning the mouse pointe

TXT / PDF

Disponible 87 Archivos para Digital IXUS 700 Ver todos >
HelpDrivers Desde Marzo del 2000