Canon Digital IXUS 700 Descarga Drivers

DIGITAL CAMERA Camera User Guide
Please read the Read This First section (p. 6).
Please also read the Canon Digital Camera Software Starter Guide Disk and the Direct Print User Guide.
CEL-SE8JA210 © 2005 CANON INC. PRINTED IN THE EU
Camera User Guide
ENGLISH
CANON INC.
30-2 Shimomaruko 3-chome, Ohta-ku, Tokyo 146-8501, Japan
Europa, Africa & Middle East
CANON EUROPA N.V.
PO Box 2262, 1180 EG Amstelveen, The Netherlands
CANON (UK) LTD
For technical support, please contact the Canon Help Desk:Tel: 08 705 143723 (7.91 p./min) Fax: 08 705 143340 http://www.canon.co.uk/Support/index.asp
P.O. Box 614, Borehamwood, WD6 9AA, UK
CANON COMMUNICATION & IMAGE FRANCE S.A.
102 Avenue du Général de Gaulle,
92257 La Garenne Colombes Cedex, France
Tel: Hotline 0825 002 923 (0.15 €/min)http://www.cci.canon.fr
CANON DEUTSCHLAND GmbH
Postfach 100401, 47704 Krefeld, Germany
Customer Hotline: 0180 500 6022 (0.12 €/min)http://www.canon.de
CANON ITALIA S.P .A.
Via Milano 8, 20097 San Donato Milanese (MI), Italy
Tel: 848 800 519 (0.019 €/min)http://www.canon.it
CANON ESPAÑA S.A.
C/Joaquín Costa, 41 - 28002 Madrid, Spain
Tel. Atención al Cliente: 901 301 301
Helpdesk: 807 11 72 55http://www.canon.es
CANON BELGIUM N.V. / S.A.
Bessenveldstraat 7, B-1831 Diegem, Belgium
Tel: (02) 722.04.11 Fax: (02) 721.32.74
Helpdesk : 070 300012 (0.12 €/min)http://www.canon.be
CANON LUXEMBOURG S.A.
Rue des Joncs 21, L-1818 Howald, Luxembourg
Tel: 27 302 054 (0.12 €/min)http://www.canon.lu
CANON NEDERLAND N.V.
Neptunusstraat 1, 2132 JA Hoofddorp, The Netherlands
Tel: 0900 202 2915 (0.13 €/min)http://www.canon.nl
CANON DANMARK A/S
Knud Højgaards Vej 1, DK-2860 Søborg, Denmark
Tel: 70 2055 15 (0.25 K/min)http://www.canon.dk
CANON NORGE AS
Hallagerbakken 110, Postboks 33, Holmlia, 1201 Oslo, Norway
Tel: 226 29321 (0.24 NOK/min)
E-mail: [email protected]://www.canon.no
Finland
CANON OY
Kuluttajatuotteet
Huopalahdentie 24, PL1
00351 Helsinki, Finland
Helpdesk: 020 366 466 (0,0821 €/puhelu + 0,0147 €/min)http://www.canon.fi
CANON SVENSKA AB
Gustav III:s Boulevard 26, S-169 88 Solna, Sweden
Helpdesk: 08 744 8620http://www.canon.se
CANON (SCHWEIZ) AG
Industriestrasse 12, 8305 Dietlikon, Switzerland
Customer Hotline: 0848 833 838http://www.canon.ch
Austria
CANON GES.M.B.H.
Zetschegasse 11 - 1230 Wien, Austria
Helpdesk: 0810 0810 09 (0,07 €/min)http://www.canon.at
Portugal
SEQUE - SOC. NAC. EQUIP ., S.A.
Pr. Alegria, 58 - 2ºC, 1269-149 Lisboa, Portugal
Tel: +351 21 324 2830 Fax: +351 213472751
E-mail: [email protected]://www.seque.pt
Eastern Europe
CANON CEE GMBH
Oberlaaerstr 233, A-1100 Wien, Austria
E-mail: [email protected]://www.canon-cee.com
CIS
CANON NORTH-EAST OY
Huopalahdentie 24, P .O. Box 46, FIN-00350 Helsinki
Tel: +358-10 544 00 Fax: +358-10 544 10http://www.canon.ruFlowchart and Reference Guides
Use of genuine Canon accessories is recommended.
This product is designed to achieve excellent performance when used with genuine Canon accessories. Canon shall not be liable for any damage to this product and/or accidents such as fire, etc., caused by the malfunction of non-genuine Canon accessories (e.g., a leakage and/or explosion of a battery pack). Please note that this warranty does not apply to repairs arising out of the malfunction of non-genuine Canon accessories, although you may request such repairs on a chargeable basis.
Shooting with the Camera
This Guide
This Guide
Canon Digital Camera
Software Starter Guide Disk
Canon Digital Camera
Software Starter Guide Disk
Direct Print User Guide
Printer User Guide
Installing the Software
Connecting the Camera to a Computer
Downloading Images to a Computer
Using the Printer and Printing
This Guide
* Default setting Setting available Setting can only be selected for the first image.
(Shaded Area): Setting is memorized even when the camera power is shut off.
With the exception of the [Date/Time], [Language] and [Video System] settings, all the other menu settings and changes made with the camera buttons can be reset to the default values in a single operation (p. 58).
(1)(2)

The resolutions and frame rates for the (Movie) mode are as follows.
(3) The default flash setting is Auto with Red-Eye Reduction in the modes,
Auto in the modes, and Off in the modes.
- The flash cannot be set in mode.
- When the flash fires in mode, the camera will automatically use Slow Synchro mode.
(4) You cannot switch between the Macro/Infinity modes when the camera is in the modes.
(5) AF cannot be selected in the modes.
(6) Can be set during shooting (only in Standard mode).
(7) Exposure compensation not available in or modes.
(8) This cannot be set when the Photo Effect is set to Sepia or B/W.
(9) Automatically set by the camera.
(10)The Photo Effect cannot be set in the mode.
Function

Page
Digital Zoom ––– (6)p. 74
Metering
Method
Evaluative – * * *– – –p. 94 Center-Weighted Average – –––
Spot – –––
Exposure Compensation – (7)
(7)p. 95
Long Shutter – ––– – –p . 9 5
White Balance
(8)
– –
(9)
p. 98
Photo Effect – – –
(9)
(10)p. 101
ISO Speed –
(9)

(9)

(9)

(9)

(9)p. 109
Auto Rotate – p. 110

Resolution
640 x 480 pixels*––
320 x 240 pixels –
160 x 120 pixels –– Frame Rate
60 frames/sec. – –
30 frames/sec.*––
15 frames/sec. – 1931
Camera Body Temperature
If your camera is used for prolonged periods, the camera body may become warm. Please be aware of this and take care when operating the camera for an extended period.
About the LCD Monitor
The LCD monitor is produced with extremely high-precision manufacturing techniques. More than 99.99% of the pixels operate to specification. Less than 0.01% of the pixels may occasionally misfire or appear as red or black dots. This has no effect on the recorded image and does not constitute a malfunction.
Video Format
Please set the camera’s video signal format to the one used in your region before using it with a TV monitor (p. 156).
Charging the Date/Time Battery
 The camera has a built-in rechargeable lithium-ion battery that maintains the date, time and other camera settings. This battery recharges when the main battery pack is inserted into the camera. When you first purchase the camera, place a charged battery pack in it for at least 4 hours to charge the date/time battery. It will charge even when the camera power is turned off.
 If the Date/Time menu appears when the camera power is turned on, it means that the date/time battery charge is depleted. Recharge it as described above.2
About This Guide
Conventions Used in the Text: This mark denotes issues that may affect the camera’s operation.: This mark denotes additional topics that complement the basic operating procedures.
Icons appearing beside or below titles indicate the modes in which the procedure can be used. In the example below, the Self-timer mode can be used in the following shooting modes.
• Auto  Manual  Special Scene
 Movie  Digital Macro  My Colors
 Stitch Assist
Using the Self-timer
In this guide an SD memory card (Secure Digital, a copyright protection system) is referred to as an SD card.3
Table of Contents
Please Read......................................................................................... 6
Safety Precautions .............................................................................. 7
Preventing Malfunctions ................................................................... 12
Components Guide........................................................................... 13
Charging the Battery Pack ................................................................. 19
Installing the Battery Pack................................................................. 22
Installing the SD Card ....................................................................... 24
Formatting SD Cards..................................................................... 26
Setting the Date and Time ................................................................. 29
Setting the Language ........................................................................ 32
Turning the Power On ....................................................................... 34
Using the LCD Monitor...................................................................... 36
LCD Monitor Brightness.................................................................... 38
Information Displayed on the LCD Monitor ....................................... 39
Using the Viewfinder ......................................................................... 43
Using the Zoom................................................................................. 44
Pressing the Shutter Button .............................................................. 45
Selecting Menus and Settings ........................................................... 47
Menu Settings and Factory Defaults.................................................. 52
Resetting Settings to Their Default Values ........................................ 58
Shooting in Auto Mode .............................................................. 59
Reviewing an Image Right After Shooting......................................... 60
Changing Resolution/Compression Settings ..................................... 62
Using the Flash ............................................................................. 64
Shooting in a Special Scene Mode .......................................... 66
Shooting in Manual Mode ....................................................... 69
Shooting Close-Ups/ Infinity Shots ..................................... 70
Magnified Close-Up Shooting (Digital Macro)................................... 72
Read This First
Components Guide
Preparing the Camera
Basic Functions
Shooting
Items marked with are lists or charts that summarize camera functions or procedures.4
Using the Digital Zoom ...................................................................... 74
Continuous Shooting ................................................................... 75
Postcard Date Imprint Mode.............................................................. 76
Using the Self-timer ..................................................................... 78
Shooting a Movie........................................................................ 81
Shooting Panoramic Images (Stitch Assist) ...................................... 86
Switching between Focusing Modes.................................................. 89
Shooting Hard-to-Focus Subjects (Focus Lock, AF Lock).................. 90
Locking the Exposure Setting (AE Lock)............................................ 92
Locking the Flash Exposure Setting (FE Lock)................................... 93
Switching between Metering Modes ........................................... 94
Adjusting the Exposure Compensation .............................................. 95
Shooting in Long Shutter Mode......................................................... 96
Adjusting the Tone (White Balance)................................................... 98
Changing the Photo Effect ............................................................... 101
Shooting in a My Colors Mode ........................................................ 102
Adjusting the ISO Speed.................................................................. 109
Setting the Auto Rotate Function ..................................................... 110
Resetting the File Number ............................................................... 111
Displaying Images Individually ........................................................ 113
Magnifying Images .................................................................... 114
Viewing Images in Sets of Nine (Index Playback) .................... 115
Jumping to Images............................................................... 117
Viewing Movies ............................................................................... 118
Editing Movies................................................................................. 121
Rotating Images in the Display ........................................................ 123
Attaching Sound Memos to Images................................................. 124
Automated Playback (Slide Shows)................................................. 126
Protecting Images ........................................................................... 130
Erasing Single Images............................................................... 131
Erasing All Images........................................................................... 132
About Printing ................................................................................. 134
Setting the DPOF Print Settings....................................................... 136
Playback
Erasing
Print Settings5
Selecting Images for Transferring ................................................... 142
Connecting the Camera to a Computer............................................ 146
Computer System Requirements ................................................ 146
Downloading Images by Direct Transfer ......................................... 152
Connecting the Camera to the Computer to Download Images Without
Installing Software ................................................................... 154
Downloading from an SD Card........................................................ 154
Viewing Images on a TV set ............................................................ 155
Changing My Camera Settings ........................................................ 157
Registering My Camera Settings ..................................................... 159
List of Messages ............................................................................. 162
Troubleshooting .............................................................................. 164
Using an AC Adapter Kit (Sold Separately)...................................... 169
Using an Externally Mounted Flash (Sold Separately) ..................... 170
Camera Care and Maintenance........................................................ 172
Specifications.................................................................................. 173
Photo Tips and Information............................................................. 181
Index ............................................................................................... 183
Functions Available in Each Shooting Mode.................................... 192
Image Transmission Settings (DPOF Transfer Order)
Connecting the Camera to a Computer
Viewing Images on a TV set
Customizing the Camera (My Camera Settings)
List of Messages
Troubleshooting
Appendix6
Read This First
Please Read
Test Shots
Before you try to photograph important subjects, we highly recommend that you shoot several trial images to confirm that the camera is operating and being operated correctly.
Please note that Canon Inc., its subsidiaries and affiliates, and its distributors are not liable for any consequential damages arising from any malfunction of a camera or accessory, including SD memory cards, that results in the failure of an image to be recorded or to be recorded in a way that is machine readable.
Warning Against Copyright Infringement
Please note that Canon digital cameras are intended for personal use and should never be used in a manner that infringes upon or contravenes international or domestic copyright laws and regulations. Please be advised that in certain cases the copying of images from performances, exhibitions, or commercial properties by means of a camera or other device may contravene copyright or other legal rights even if the image was shot for personal use.
Warranty Limitations
For information on your camera's warranty, please refer to the Canon
European Warranty System (EWS) Booklet supplied with your camera.
For Canon Customer Support contacts, please see rear of this booklet or the European Warranty System (EWS) Booklet.7
Safety Precautions
 Before using the camera, please ensure that you read and understand the safety precautions described below. Always ensure that the camera is operated correctly.
 The safety precautions noted on the following pages are intended to instruct you in the safe and correct operation of the camera and its accessories to prevent injuries or damage to yourself, other persons and equipment.
 In the next few pages, the term equipment refers primarily to the camera and its power supply accessories, such as the battery charger and separately sold compact power adapter. See the System Map for power supply accessory details.
Warnings
• Do not aim the camera directly into the sun or at other intense light sources that could damage your eyesight.
 Do not trigger the flash in close proximity to human or animal eyes.
Exposure to the intense light produced by the flash may damage eyesight.
In particular, remain at least one meter (39 inches) away from infants when using the flash.
 Store this equipment out of the reach of children and infants. Accidental damage to the camera or battery pack by a child could result in serious injury. In addition, placement of the strap around the child’s neck could result in asphyxiation.
 Do not attempt to disassemble or alter any part of the equipment that is not expressly described in this guide. Disassembly or alteration may result in high-voltage electrical shock. Internal inspections, alterations and repairs should be conducted by qualified service personnel authorized by your camera distributor or a Canon Customer Support Help Desk.
Storing SD cards
Store the SD memory card out of the reach of children and infants.
It may be swallowed accidentally. If this occurs, consult a doctor immediately.8
 To avoid the risk of high-voltage electrical shock, do not touch the flash portion of the camera if it has been damaged. Similarly, never touch internal portions of the equipment that become exposed as a result of damage. There is a risk of high-voltage electrical shock. Please take the first opportunity to consult your camera distributor or the closest Canon
Customer Support Help Desk.
 Stop operating the equipment immediately if it emits smoke or noxious fumes. Failure to do so may result in fire or electrical shock. Immediately turn the camera power off, remove the battery pack or unplug the battery charger from the power outlet. Confirm that smoke or fume emissions have ceased. Please consult your camera distributor or the closest Canon
Customer Support Help Desk.
 Stop operating the equipment if it is dropped or the casing is damaged.
Failure to do so may result in fire or electrical shock. Immediately turn the camera power off, remove the battery pack or unplug the power cable from the power outlet. Please consult your camera distributor or the closest Canon Customer Support Help Desk.
 Do not allow the equipment to come into contact with, or become immersed in, water or other liquids. Do not allow liquids to enter the interior. The camera has not been waterproofed. If the exterior comes into contact with liquids or salt air, wipe it dry with a soft, absorbent cloth. If water or other foreign substances enter the interior, immediately turn the camera power off and remove the camera battery pack or unplug the power cord from the power outlet. Continued use of the equipment may result in fire or electrical shock. Please consult your camera distributor or the closest Canon Customer Support Help Desk.
 Do not use substances containing alcohol, benzene, thinners or other flammable substances to clean or maintain the equipment. The use of these substances may lead to fire.
 Remove the power cord on a regular periodic basis and wipe away the dust and dirt that collects on the plug, the exterior of the power outlet and the surrounding area. In dusty, humid or greasy environments, the dust that collects around the plug over long periods of time may become saturated with humidity and short-circuit, leading to fire.9
 Do not cut, damage, alter or place heavy items on the power cord.
Any of these actions may cause an electrical short circuit, which may lead to fire or electrical shock.
 Do not handle the power cord if your hands are wet. Handling it with wet hands may lead to electrical shock. When unplugging the cable, ensure that you hold the solid portion of the plug. Pulling on the flexible portion of the cable may damage or exposure the wire and insulation, creating the potential for fires or electrical shocks.
 Use only recommended power accessories. Use of power sources not expressly recommended for this equipment may lead to overheating, distortion of the equipment, fire, electrical shock or other hazards.
 Do not place the battery pack near a heat source or expose it to direct flame or heat. Neither should you immerse it in water. Such exposure may damage the battery pack and lead to the leakage of corrosive liquids, fire, electrical shock, explosion or serious injury.
 Do not attempt to disassemble, alter or apply heat to the battery pack.
There is serious risk of injury due to an explosion. Immediately flush with water any area of the body - including the eyes and mouth, or clothing - that comes into contact with the inner contents of a battery. If the eyes or mouth contact these substances, immediately flush with water and seek medical assistance.
 Avoid dropping or subjecting the battery pack to severe impacts that could damage the casings. It could lead to leakage and injury.
 Do not short-circuit the battery terminals with metallic objects, such as key holders. It could lead to overheating, burns and other injuries. Use the supplied terminal cover to transport or store the battery pack.
 Before you discard a battery, cover the terminals with tape or other insulators to prevent direct contact with other objects. Contact with the metallic components of other materials in waste containers may lead to fire or explosions. Discard the battery pack in specialized waste facilities if available in your area.
 Use only recommended battery pack and accessories. Use of battery pack not expressly recommended for this equipment may cause explosions or leaks, resulting in fire, injury and damage to the surroundings.10
 Use the specified battery charger to charge Battery Pack NB-3L. Use of other chargers may lead to overheating, distortion of the equipment, fire or electrical shock.
 Disconnect the battery charger and compact power adapter from both the camera and the power outlet after recharging and when they are not in use to avoid fire and other hazards. Continuous use over a long period may cause a unit to overheat and distort, resulting in fire.
 The battery charger and compact power adapter are designed for exclusive use with your camera. Do not use it with other products or batteries. There is a risk of fire and other hazards.
Caution about magnetic fields
Keep objects that are sensitive to magnetic fields (such as credit cards) away from the speaker of the camera (p. 13). Such items may lose data or stop working.11
Cautions
 Avoid using, placing or storing the equipment in places subject to strong sunlight or high temperatures, such as the dashboard or trunk
(boot) of a car. Exposure to intense sunlight and heat may cause the batteries to leak, overheat or explode, resulting in fire, burns or other injuries. High temperatures may also cause deformation of the casing.
Ensure that there is good ventilation when using the battery charger to charge the battery pack.
 Do not store the equipment in humid or dusty areas. Storage in such areas could lead to fire, electrical shock or other damage.
 Be careful not to bang the camera or subject it to strong impacts or shocks that could lead to injury or damage the equipment when wearing or holding it by the strap.
 Be careful not to cover the flash with your fingers or clothing when shooting. The flash may be damaged and emit smoke or noise. In addition, do not touch the surface of the flash after taking several pictures in rapid succession. Either action could result in burns.
 Do not operate the flash with dirt, dust or other items stuck to its lens.
The resulting heat build-up could damage the flash.
 Ensure that the battery charger is plugged into a power outlet of the specified rating, not over the specified rating. The plug of the battery charger varies according to region.
 Do not use the battery charger or compact power adapter if the plug or cable is damaged, or if the plug is not fully inserted into the power outlet.
 Do not allow metal objects (such as pins or keys) or dirt to contact the charger terminals or plug.
 If your camera is used for prolonged periods, the camera body may become warm. Please take care when operating the camera for extended periods as your hands may experience a burning sensation.12
Preventing Malfunctions
Avoid Strong Magnetic Fields
Never place the camera in close proximity to electric motors or other equipment generating strong electromagnetic fields. Exposure to strong magnetic fields may cause malfunctions or corrupt image data.
Avoid Condensation Related Problems
Moving the equipment rapidly between hot and cold temperatures may cause condensation (water droplets) to form on its external and internal surfaces. You can avoid this by placing the equipment in an airtight, resealable plastic bag and letting it adjust to temperature changes slowly before removing it from the bag.
If Condensation Forms Inside the Camera
Stop using the camera immediately if you detect condensation. Continued use may damage the equipment. Remove the SD card and battery pack or compact power adapter from the camera and wait until the moisture evaporates completely before resuming use.
Extended Storage
When not using the camera for extended periods of time, remove the battery pack from the camera or battery charger and store the equipment in a safe place. Storing the camera for extended periods with a battery pack installed will run down the battery pack. However the date, time and other camera settings may reset to default settings if the battery pack has been removed for more than three weeks. 13
Components Guide
Components Guide
Front View
* When carrying the camera by the strap, be careful not to swing the camera or catch it on other items.
The interface cable and AV cable cannot be connected simultaneously.
AF-assist Beam (p. 46)
Red-Eye Reduction Lamp (p. 65)
Self-timer Lamp (p. 78)
Flash (p. 64)
Lens
Microphone (p. 124)
Wrist Strap Mount
Viewfinder Window (p. 43)
DIGITAL Terminal (p. 147)
A/V OUT (Audio/Video output) Terminal (p. 155)
Terminal Cover
Attaching the Wrist Strap
*
Speaker14
Back View
LCD Monitor (p. 36)
Tripod Socket
SD Card Slot/
Battery Cover (pp. 22, 24)
Battery Compartment
(SD card/battery compartment)
Viewfinder Window (p. 43)
DC Coupler Terminal Cover (p. 169)15
Components Guide
Operation Panel
Power Button (p. 34)
Shutter Button (p. 45)
(Metering) Button (p. 94)/
(Jump) Button (p. 117)/
Button
(Flash) Button (p. 64)/
Button
(Continuous) Button (p. 75)/
(Self-timer) Button (p. 78)/
(Single Image Erase) Button (p. 131)/
Button
Mode Dial (p. 16)
(Macro) / (Infinity) Button (p. 70)/
Button
FUNC./SET (Function/Set) Button
(p. 47)
MENU Button (p. 49)
Indicators (p. 17)
(Print/Share)
Button (p. 18)
Power Lamp
Lights when the power is on or transmission preparations are complete when connected to a computer
Zoom Lever
Shooting: (Wide Angle)/ (Telephoto) (p. 44)
Playback: (Index) (p. 115)/ (Magnify) (p. 114)
DISP. (Display) Button (p. 36)16
Mode Dial
Use the mode dial to select a shooting or playback function.
To Shoot Still Images (Shooting Mode)
To Play Back Images (Playback Mode)
When a printer is properly connected, the , or icon appears on the LCD monitor.
Auto
Shoots with settings selected by the camera
(p. 59).
Manual
You select the exposure compensation, white balance or photo effect settings (p. 69).
Special
Scene
Effective for shooting in 9 varying conditions
(p. 66).
Movie Shoots movies with sound (p. 81).
Playback
 Play back or delete images from the SD card
(pp. 113, 131)
 The lens retracts approximately 1 minute after the mode dial is turned from a shooting mode to playback mode.
 When a printer is connected, images can be printed (see the Direct Print User Guide).
 When a camera is connected, recorded images can be downloaded to and viewed with a computer (p. 146).17
Components Guide
Indicators
The indicators light or blink when the power button or shutter button is pressed.
Upper Indicator
Green: Ready to shoot
Blinking Green: Recording to SD card / Reading SD card / Erasing from SD card/Transmitting data (during a computer connection)
Orange: Ready to shoot (flash on)
Blinking Orange: Ready to shoot (camera shake warning)
Lower Indicator
Yellow: Macro mode / Infinity mode/ AF lock
Blinking Yellow: Focusing difficulty (single beep).
Although you can still press the shutter button when the indicator blinks yellow, you are recommended to shoot using the focus lock or AF lock (p. 90).
Holding the Camera
Images become blurred if the camera moves when the shutter button is pressed. Hold the camera as shown below to avoid camera movement when shooting.
 Make sure that your hair or fingers do not obstruct the lens, flash, self-timer lamp, microphone or speaker.
 Fix the camera onto a tripod when shooting infinity shots or in dark places.
Hold the camera firmly with both hands and let your elbows rest at your sides.
Place your finger on the shutter button as

TXT / PDF

Disponible 87 Archivos para Digital IXUS 700 Ver todos >
HelpDrivers Desde Marzo del 2000